CERTAIN REPAIRS TO JOINERY, FLOORING, PLASTERING, SANITARY WORKS, CLEANING OF MANHOLES, SEWAGE LINES, SEPTIC TANKS, SOAKAGE WELLS, WATER TANKS AND ALLIED B/R REPAIRS AT OKHA UNDER GE NAVY PORBANDAR

Amount

Taking down chowkats or frame of any description n exc 1.5 Sqm each (without taking off shutters from the frames) complete as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications and drawings complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing complete all as specified and directed by Eng-in-Charge.

Taking down shutters of description exc 1 sqm and not exc 2 sqm each complete all as specified and directed.

Re-fixing in the same opening of shutters of any description exc 1 sq and n exc 2 sqm each complete all as specified and directed.

Taking down chowkats or frame of any descrip tion exc 1.5 Sqm each and n.exc 4 Sqm (without taking off shutters from the frames) and removing to or from stores complete as specified and directed.

S&F 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed

S&F, 35mm thick, second class HW in glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed by Eng-in-Charge.

S&F 35mm thick 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mmB.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed

S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to wooden door Shutters/aluminium sliding shutters complete all as specified and directed.

S&F,in repairs, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to wooden door Shutters/aluminium sliding shutters with or without required beading complete all as specified and directed.

S& F powder coated aluminium frame and shutters for doors, windows, ventilators with one or more rebates including joining cleat and necessary fitting (handle, locking arrangement, stoppage) for fixing etc (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F 4.8mm thick Sheet glass, ordinary quality with and including neoprene beadings in square nexc 0.5 sq.m in each pane as specified and directed.

S&F 5.5mm thick Sheet glass, ordinary quality with and including neoprene beadings in square nexc 0.5 sq.m in each pane as specified and directed.

S&F in repair including hacking out 4.8mm thick Sheet glass, ordinary quality with and including neoprene beadings in square nexc 0.5 sq.m in each pane as specified and directed.

S&F in repair powder coated aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 104 or equivatent 6.5 mm thick all as specified and as directed.

M & L for preparation of new wooden surface of any description n. exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as all as specified and directed.

S&F, 250mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F 150mm size, aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F aluminium, anodised barrel tower bolt of extruded section and fixed 200 mm of size

S&F 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel springcomplete all as specified and directed.

S&F butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.

S&F SS butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.

S&F, in repairs, 250mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cost or extraded sections and fixing bolts and sliding bolts of extraded sections or cost aluminium alloy.

S&F, in repairs, 150mm size, aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F, in repairs, aluminium, anodised barrel tower bolt of extruded section and fixed 200 mm of size

S&F, in repairs, 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel springcomplete all as specified and directed.

S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc but of anodised aluminium alloy.25mm dia Stainless Steel curtain rod etc complete all as specified and directed

S & F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as all as specified and directed.

S & F in repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as all as specified and directed.

S&F, in repairs mortice lock of mild steel, vertical type of size 75mm with duplicate key for door complete all as specified.

M&L for preparation of old wooden surface of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surface of any description exc. 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F, in repairs, Door closer hydraulically regulated of aluminium (extruded section) body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Running welding in repair of metal to be welded exc 6mm but n.exc 9mm thick complete all as specified and directed.

S & F solid PVC wall lining/paneling consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame with 5 mm PVC fillet of width 35 mm for wall panelling for fixing to wall to make PVC frame as per specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for suspended ceiling with prepainted calcium silicate board 10mm thick of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600x600mm, with aluminium snap grid framework and hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified.

GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including hangers and hanging arrangements, including providing and fixing 12 mm thick seamless calcium silicate ceiling board made out of 1800 x 1200mm size board, comprising of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having Philips head with under head cutter at minimum spacing of 200mm centre to centre, including fnishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tap to provide seamless finish and multi layer design complete all as specified and directed.

S & F in repair for 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work with screws to timber frame work with magnetic locks complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm(600x600 mm) , in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L, Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm(600x600 mm), in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed

M&L coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm (300x300 mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L for coloured glazed ceramic tiles of size 450 x 350 x 7mm thick on vertical surface such as skirting/dado, set and jointed in net cement slurry and pointed in colour cement to match ver 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 9-10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm but including 600 x 600mm size in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 9-10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm but including 600 x 600mm size as in dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

Dismantling stone slab and tiles of any description or thickness in floors,aprons etc laid dry or laid dry and pointed.

M & L for udaipur green marble slab 18-20mm thick machine cut in platform including cutting and polishing, moulding edges over and including 15 mm thick CM in 1:6 screed bed complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc and including 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for 18-20mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.

M&L for rounding to edges of stone slabs two edge full round,such as in steps,cooking platform and other similar situation complete all as specified and directed.

Demolition of cement concrete (Un-reinforced) in ground floors n.exc 15cm thick (above or below grnd level)

M&L for 25mm thick cement concrete type B1, 1:2:4 (20mm graded stone aggregate) to receive floor finishes without using extra cement complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for PCC (1:4:8) type D2 using 40 mm graded stone agg 75 mm thick as in sub base to floor complete

M&L for chequered cement concrete tiles 20cmx20cmx25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified.

Taking down cement plaster from brick or stone walls incl racking out joints hacking for key, scrubbing down with water etc.

M&L for rendering 15mm thick cement plaster 1:6 on stone masonry surface or surface other than fair face of brickwork surface finished even and smooth without using extra cement.

M&L for rendering 5mm thick in (1:3) cm on fair faces of ceiling, chajjas, fins facia etc finished even and smooth without using extra cement complete all as specified

M&L for rendering 15mm thick cement plaster 1:4 on stone masonry surface or surface other than fair face of brickwork surface finished even and smooth without using extra cement.

M&L for preparing new plastered or un-plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed.

M&L for preparation of new surfaces of plastered or unplastered of wall and application of three coat of white washing.

M&L for preparing of newly plastered surface of walls and applying one layer 1 mm of E75 primer and two coats of oil bound distemper over a coat of primer etc complete

M&L for Preparation of new plastered surfaces in walls soffits, facia roof and applying Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. at any height including necessary scaffolding etc complete all as specified and as directed by Engr-in-Charge of weather coat primer all as specified.

M&L for complete removal of existing treatment with mechanical scrubber on old plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper over 1 mm plaster of paris putty on walls complete all as specified and directed.

M&L for complete removal of existing treatment of wall ( any no. of layers) and making surface even and smooth to receive two coats of anti fungal weather proof acrylic based paint 100% acrylic over coat of exterior wall primer after preparation of surface of at any height including necessary scaffolding etc. complete all as specified and as directed by Engr-in-Charge

Demolition of stone/ boulder masonry, built in cement mortar incl coping etc all as specified and as directed by Engr-in-Charge.

M&L for walling of Porbandar stone masonry well bonded and solidly hearted built in CM 1:6 complete all as specified .

S & F in repairs 15mm bore, fancy type Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or unioncomplete all as specified and directed.

S&F in repairs bibtap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe 15mm bore chromium plated (fancy type) all as specified.

S&F in repairs pillar tap, cast copper alloy, with capstan head, chromium plated scrwed down high pressure with or without letter 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe of bore 15mm all as specified.

S&F in repair 10 litres PVC valveless, syphonic action type flushing cistern, with inlet ball valve, float and handle including brackets and PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified

S and F in repair PVC flush Pipe 32 mm bore for low level flushing cistern complete all as specified and directed.

S & F in repair stainless steel kitchen plate rack made out of 1.00 mm thick stainless steel of size 750 x600x250mm including screws and weight not less than 5.00 Kg complete all as specified and directed.

S & F in repairs 12 mm Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes writing words required.

S & F in repairs Tubular Towel Rail 20mm dia. 'D' type, 600mm long of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and directed.

Dismanting of PVC water tanks of size Exc 500 ltrs and n.exc 1000 ltrs capacity or any description and at any position and removing to store/ removing from site.

S & F 500 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl connecting up pipes securing access covers etc as specified and as directed.

S & F 1000 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl connecting up pipes securing access covers etc as specified and as directed.

S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore all as specified.

S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 25 mm bore all as specified with min weight shall be 455 gms.

Taking down eaves Gutters rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and direceted.

S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F in repair 110mm dia PVC bends of any radius acess door.

S & F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S & F in repair 75 mm bore PVC (SWR) bends 75mm ( any radius), diminishing pieces or tapers ( larger bore measured).

S&F in repairs 75mm bore PVC (SWR) floor trap long body type with grating including jointing with solvent cement.

M&L for fixed in repair Grating square 150 mm size of PTMT (Minimum weight 100gms)

S&F in repair CP Grating square 150 mm size complete all as specified and directed.

S & F Rimless Single Piece WC with UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 385x720x710 mm, S Trap- 300 mm in floor fixed in repair / replacement complete all as specified and directed. Make : Jaquar. Sample Approved by GE

S & F counter top Wash Hand basin size 500x435x180 mm including waste pipe and waste coupling chromium plated, brackets and cutting for and pinning in ends of brackets or errecting stand but excl

Fancy type Pillar Cock Long Neck with Aerator` cast copper alloy 15mm bore with crutch screwed down fixed in repair / replacement complete all as specified and directed.

Single Lever Wall Mixer with Provision For Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flangesr fixed in repair / replacement complete all as specified and directed.

S & F Bib Cock with Wall Flange fixed in repair / replacement complete all as specified and directed

S&F in repairs PVC cover lid for PVC water tanks of capacity 500-1000 ltrs.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc exc 250 & n.exc 500 ltrs capacity and writing date of cleaning using synthetic enamel paint all as specified and directed.

Taking out (desilting) silt, Brick Bats, debris liquid waste sludge in solid/semi-solid state from Manholes including pumping out sludge where ever necessary plugging diverting the flow in the drain, removing removed silt/sludge in deposit away from the edge of manholes, by mechanical means such as jet auger and mechanical vacuum tank as directed including use of safety belt, mask, dry cells torch for lightening inside the manholes and taking similar precautionary measures and removing the sludge etc outside MD land in covered container and cleaning the manholes and surrounding with clean water, and closing the manhole with cover etc all as specified and directed:-

Manholes not exceeding depth of 1.0 mtr.

Manholes depth exceeding 1.0 mtr but not exceeding 2.0 mtr.

Removal of blockage of sewage line of pipe up to 150 mm bore and systematically cleaning the same using necessary tools mechanically or manually such as passing rope knot bamboo kanti , jet auger, pressure tool and mechanical tools of description of required size including safety measures such as mask for gas etc all as per item of cleaning of manholes flushing the pipes with water after removal of blockage as specified.

Taking out silt, brick, debris, liquids waste, sludge in solid / semi solid/ liquid state including complete cleaning of septic tank (bailing out water) and suitably disposing off outside MD land in covered container for the following capacities by mechanical means such as Jet auger and mechanical vacuum tank complete all as specified and directed by Engr-in-Charge.

a) upto 100 users capacity

b) 101 to 200 users capacity

c) 201 to 250 and above capacity

Cleaning of chocking / blocking of WHB / water closet (Indian/European WC), floor traps, Gully trap using necessary tools and cleaning /washing area and re-fixing the grating, etc in position after completion of job packing with white cement, all as specified and directed.

Demolition of 200mm NP2 / SWG pipes fixed in any position or of any description complete all as specified and directed.

Reinforced concrete pipes 200mm bore of pipe, class NP3, laid in trenches and jointed complete with collars complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc. or shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft disintegrated rock including bracking haunching / pipe line below ground level complete as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft disintegrated rock, complete all as specified.

PCC 1:3:6 type C-2 as in bed to drain pipes of 200mm bore including packing under and haunching against the sides of pipe after they are laid and tested, including filling complete all as specified and directed.

M&L cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150mm dia complete all as specified and directed.

M&L in repairs for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

M&L in repairs Salt glazed stoneware gully traps, size 150x150mm, squre or round mouthed' with 'P' trap and encasing in PCC 1:3:6 type C-2 including excavation in any type of soil returning, filling in ramming and removal of surplus soil and CI grating as fixed in repairs complete all as specified and directed.

Pre cast RCC (1:2:4) type B-1 using 20mm graded stone aggregates as in manhole cover and set in cement mortar (1:4) including necessary form work complete all as specified. (Reinforcement shall be measured & paid separately).

Demolition reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

Mild steel CRS TMT steel bar for reinforcement 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed)not less than 0.9mm dia or securing with clips quality complete all as specified.

PVC (SWR) couplers in repairs of nominal bore 110mm fixed in repair complete all as specified and directed.

PVC (SWR) couplers in repairs of nominal bore 75mm fixed in repair complete all as specified and directed.

PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundations mass concrete complete all as specified and directed.

M&L for even spreading of 25mm thick layer of sand cushioning incl watering & consolidation all as specified & directed by Engineer-in-charge.

M&L for machine pressed precast concrete rubberised inter locking paver blocks any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade complete all as specified and directed by Engineer-in-charge.

M&L for PCC 1:2:4 type B-1 using (20mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, Benching, kneelers, apex stones, bed plates, kerbs, saucer drain(including finishing top surface of drain even and smooth without using extra cement), water troughs and the like including weathering, slightly rounded or chamfered angles and throating, and similar work including use & waste of necessary form work complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks & from mouths of circulating pipes etc of service water/loft tanks in / over roof buildings at different locations of capacities as under:

Capacity exceeding 250 but not exceeding 500 litres each

Capacity exceeding 501 litres but not exc 1000 litres each

Capacity exceeding 1001 litres but not exc 2000 litres each Note for item No. 126.00: 1. The contractor will write date of cleaning& next due date of cleaning on Tank as directed by the Engr-in-Charge. 2. At the time of cleaning disconnected pipes/fittings shall be reconnected as per existing to make it leak proof complete all as directed by the Engr-in-Charge.

Taking up or down pvc/ steel tubing of 20 mm bore and connections

Taking up or down pvc/ steel tubing of 25/32 mm bore and connections

S&F uPVC pipes 20 mm bore of pressure rating 10 Kg/ Sqcm incl all fittings fixed complete to walls, ceilings or in floors etc.

S&F uPVC pipes 25 mm bore of pressure rating 10 Kg/ Sqcm incl all fittings fixed complete to walls, ceilings or in floors etc.

S&F in repairs Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm 45gms /25mm- 65gms)

S&F in repairs viterous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trapand making good the disturbed surface to match with the existing complete all as specified and as directed.

S&F in repairs vitreous china squatting pan (Orissa pattern) long pan including provision of cement concrete bedding fixed in repair size 580x440mm white with intergral footrest with 'P' or 'S' trap complete all as specified.

S&F in repairs Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for European / Anglo indian type WC all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

JAY BHARAT METAL SUPPLIERS

K B N TRADERS

OM ENTERPRISE