Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.8 LAccepted-AOC | ₹13.8 L Quoted ₹14.0 L | L1 | Accepted-AOC Ok |
| 2 | L2₹14.9 L+₹96,149 (6.87%)Rejected-AOC M S 4BC PITAMPURA DELHI 110034 | DELHI | NORTH WEST DELHI | DELHI | 110034 | ₹14.9 L+₹96,149 (6.87%) | L2 | Rejected-AOC Ok |
Tender Value
₹14.9 L
EMD Value
₹29,900
Closing Date
18 Mar 2025, 6:00 pmClosed
CWE Dehradun
HQ CWE Dehradun
REPAIR / MAINTENANCE AND SERVICING OF LIFTS, FIRE ALARM / FIRE FIGHTING SYSTEM AND ALLIED WORKS AT MH DEHRADUN UNDER AGE E/M-II OF GE DEHRADUN
2025_MES_698471_1
0015/DDN/E8
Open Tender
Civil Works
Works
270 days
Dehradun
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
Yes
GE Dehradun
₹29,900
Yes
23 Jun 2025
18 Feb 2025
20 Mar 2025
18 Feb 2025
18 Mar 2025
5 Mar 2025
Amount
Comprehensive, preventive and periodical maintenance and repairs micro processor based controlled VVV frequency drive, electric driven lift with ARD following capacity incl examining, adjusting, lubricating, greasing and replacement of u/s parts like gear box oil, hooter, fire switches, indication, emergency light, low voltage relay complete all or directed by Engr-in-charge :- (a) 26 passenger - 3 Nos with serving basement, ground plus 3 floors. (b) 15 passenger- 02 Nos with serving basement, ground plus 3 floors. (c) 08 passenger- 02 Nos with serving ground plus 3 floors.
Note: (i) Gear box oil, door drive, VFVR card, Hooter/ floor sensor/ All type of electronic cards/ floor indicator/ power contactor/ VFD /wire rope/ DO Card /LOP/ emergency light/ inverter/UPS etc shall be measured & paid separately under relevant items of the schedule. Make and model of part to be replaced shall be same as existing at site or as per OEM recommendation. (ii) Comprehensive maintenance, repair and replacement of spare parts shall be carried out only by OEM or their accredited/ authorised agencies under strict supervision of well experienced and qualified staff. (ii) The make of spares shall be shown as suitable for the existing system and shall be provided by authorized manufacturer's. (iii) Contractor will periodically (monthly) examine safety devices and governor of the equipment to ensure user safety. In addition, OTIS will conduct an annual no load safety test on the equipment. (iv) The rates deemed to include for all items which are not considered in schedule but the same is essential for smooth & efficient functioning of the lift costing less then Rs 500/- i.e. fuse, thimbles, connectors, insulation tapes etc. (v) The contractor shall keep all spares reqd for routine maintenance and attend the defects immediately. In case of major defect, it shall be attended within 24 hrs failing which penal recovery @ 5000/- per day will be charged. The decision of GE will be final & binding. Note :- The fixing charges of items included in Sch 'A' (item No 2 to 40) are not included in the AMC charges.
Supply and fixing in replacement unserviceable build dog clip 8 mm all as directed.
Supply and fixing in replacement unserviceable megnetic brake coil for VTM-30 brake
Supply and fixing in replacement unserviceable Car Guide shoe liner 16 mm.
Supply and fixing in replacement unserviceable counter weight guide shoe liner 9 mm
Supply and fixing in replacement unserviceable pit switch/re-set type 1 NO/1NC 230 Volts 5 Amps
Supply and fixing in replacement unserviceable VVVF Door Drive make: Schneider model Altivar 12, 0.5 HP
Supply and fixing in replacement unserviceable door sensor. Make :- Weco/TVS, Operating voltage :- 230V AC
Supply and fixing in replacement unserviceable car door teeth belt for door operator
Supply and fixing in replacement unserviceable Door Hanger Roller, Make :- ECE 50 mm dia PU Coated
Supply and fixing in replacement unserviceable Landing door lock break roller, Make :- ECE 40 mm dia.Mtrl :- Rubber
Supply and fixing in replacement unserviceable eccentric roller for car and landing door.
Supply and fixing in replacement unserviceable sliding type car & landing shoe. Make :- ECE.
Supply and fixing in replacement unserviceable landing door weight rope E-1000 opening ATO.
Supply and fixing in replacement unserviceable landing door weight rope E-800 opening ATO.
Supply and fixing in replacement unserviceable landing door contacts fix and moving 230V AC 5 Amps
Supply and fixing in replacement unserviceable car door fix and moving 230V AC 5 Amps
Supply and fixing in replacement unserviceable VFVR PCB all as directed.
Supply and fixing in replacement unserviceable Bridge rectifier. Moder :- SRM-10D, 110 Volts, 10 Amps
Supply and fixing in replacement unserviceable 5 Volts, 5 Amps, SMPS. Make ;- Meanwell
Supply and fixing in replacement unserviceable 24 Volts, 5 Amps, SMPS. Make ;- Meanwell
Supply and fixing in replacement unserviceable over load limit switch. Make :- Rating :- 230V, 5 Amps, 1NO/1NC.
Supply and fixing in replacement unserviceable BMO PCB.
Supply and fixing in replacement unserviceable 24 Volt slozer relay with base 03No/NC.
Supply and fixing in replacement unserviceable 5 Amps 04No/NC, Auxilary contact. Make :- Telemechanic
M&L for buffing to steel doors of lift of any size at all floors complete incl polishing, rubbing removing dirt grease,rust etc complete all as specified and directed by Engr - in - Charge.
S& F in repair replacement of Main rope wire of galvanised iron of size 10 mm thick complete all as specified and directed by Engr in Charge.
Supply, install, testing and commissioning Encoder 1024PPR (suitable 08 passengers,16 Passengers & 26 Passengers). It should be properly monitor and control the lift’s position, speed, and direction. It should be functional to converts mechanical motion into electrical signals that the lift control system can interpret, ensuring smooth and accurate operation. By continuously measuring the car’s speed, the encoder to be ensures the elevator maintains a safe, controlled speed throughout its movement. It should be helps the system adjust acceleration and deceleration, providing a smooth ride experience.
Supply and fixing Mother Board as per existing panel specification to control lift logic , signal processing like call, floor, door, control unit, and display indicators
Supply and fixing in replacement microprocessor based control panel full upto 5 stop suitable for ECE make lift including VVVF drive of capacity 15 KW with LOP & COP suitable for VVVF system, centre opening auto door and speed of lift 1.0/1.5 mtr per second complete all as per existing make of OEM or other accredited/ authorised agencies including taking out old underviceable panel complete all as directed.
Supply and fixing in replacement unserviceable Travelling cable 0.75 sqmm 24 Core all as directed.
Supply & Fixing Telephone cable 0.5 Sqmm 12 Core
Supply & Fixing copper wire 0.75 Sqmm single core
Supply and fixing in replacement automatic rescue device (ERD-20) control complete unit with all accessories including maintenance free batteries (EBD Mono 12 V upto 18 AH) suitable for 26 passenger lift including taking out old unserviceable drive complete all as directed.
Supply and fixing Pit control Switch
Supply and fixing in replacement unserviceable Reed switch Pencil Type 1NC all as directed.
Supply and fixing Limit Switch Protection Ip 67 240 VAC
Supply and Fixing Elevator Junction Box
Supply and fixing in replacement variable voltage and variable frequency drive of capacity 15 KW suitable for 415 volts, AC 50 Hz for VVVF system including taking out old unserviceable drive complete all as directed.
Supply and Fixing PG card as per existing lift panel make and capacity
Supply and fix in repairs hydrant valve stainless steel with single outlet, grade with 80 mm N.B. flanged inlet, 63mm female instantaneous outlets, complete with blank caps chains, bearings IS:6290 mark and having ISI MARKED (Yard Hydrant) complete all as specified and directed.
All as per item No 41 here -in-before but double headed complete all as specified and directed.
Supply and fix in repairs fire hose cabinet to house 02 Nos hose pipe, Nozzle, branch pipe and fire mean axes, including all other related accessories fabricated from 16 gauge M.S. sheet of fully welded construction of size 800x600x250 mm min having front 4 mm thick glass door written with "BREAK IN CASE OF FIRE" painted with two coat of signal red paint over a coat of red oxide primer and two coat of brilliant white paint over one coat of red oxide primer internally with locking arrangement complete all as specified and directed.
Supply and fix in repairs first aid hose reel (swinging type) including 30 meter long 20 mm internal dia rubber lined hose reel tubing,25 mm dia stainless steel stop valve, shut off nozzle of sufficient length incl fixing of one end with hose real nozzle and other end to hose real pipe with wet riser with suitable arrangement ISI marked complete all as specified and directed.
Supply only branch pipe stainless steel 63 mm dia instaneous type inlet made thread outlet 15 mm dia Nozzles.ISI MARKED complete all as specified and directed.
Material and labour required for refilling of 5 KG ABC type fire extinguisher of 70-90% MAP complete incl decaning of existing material and refilling with fresh powder with cartridge etc complete incl disposal of existing retrieved material as per CPCB norms complete all as specified and directed.
All as per item No 46 here in above but 4.5 KG CO2 type complete all as specified and directed.
All as per item No 46 here in above but 3.0 KG CO2 type complete all as specified and directed.
All as per item No 46 here in above but 2.0 KG CO2 type complete all as specified and directed.
All as per item No 46 here in above but 9.0 Ltr water foam type complete all as specified and directed.
Supply, install, testing and commissioning Morley , Honeywell Max Loop Part code (MA-LIB2-02) suitable for Micro Processor based addressable Intellegend Fire Alarm Panel Model No (MA -8000-02) max series
Friends fire Engineers (BID ID -3264324)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .