Special Repair to HRTC Shopping Complex at Palampur Bus Stand HP

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix), including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.

Stone soling properly hand packed filling interstices with spall and consolidating with power road roller to the requested gradient and camber including spreading watering and rolling of binding materials moorum or earth etc, complete as per HP. PWD specification. 100mm (one hundred millimeter) spreed thickness (Finished work including materials and labour), including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (One cement : five coarse sand): ten graded stone aggregate 40 mm (forty millimeter) nominal size), including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.

Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc.complete. 40 mm (forty millimeter) thick with 20mm (twenty millimeter) nominal size stone aggregate, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.

Repairs to plaster of thickness 12 mm to 20 mm (twelve to twenty millimeter)in patches of area 2.5 square meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge. With cement mortar 1:4 (one cement: four coarse sand), including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.

Kota stone slabs 20 mm (twenty millimeter) thick in risers of steps, skirting, dado and pillars laid on 12 mm (twelve millimeter)(average) thick cement mortar 1:3 (one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:v New work (two or more coats) over and including water thinnable priming coat with cement primer, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @3.84 kg/10 sqm),including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. Two or more coats on new work, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: Two or more coats on new work, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.

Gopal Singh

Kapil Sharma

Amar Singh