MATERIAL SUPPLY

100 mm channel shoulder 2.5 m long

Bitumen washer

Coarse sand (zone III)

Corner angle 45x45x5 mm 1.50 m long

Double clip (bridge clip)

Epoxy paint

Fine sand (zone IV)

G.I Limpet washer

Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots

Galvanised steel J or L hooks 8 mm dia

Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm

GI trafford profile sheet 0.35mm thick

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Interlocking C.C. paver block (80 mm thick, M-30)

M.S. Tube 40 mm dia

Mild steel tubes hot finished welded type

Portland Cement

PVC pipe 63 mm outer dia. 4 kgf/cm2

Red oxide Zinc chromate primer

Safeda ballies 125 mm diameter

Second class kail wood in planks

Second class kail wood in scantling

Single clip

Smooth Wheeled Roller 8 to 10 tonne

Solid blocks of size 30x20x15cm

Stone Aggregate(single size): 06 mm nominal size

Stone Aggregate(single size): 10 mm nominal size

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Sundries

Synthetic enamel paint in black or chocolate shade

Twisted steel/deformed bars

Vibrator (Needle type 40 mm)

wall form panel 1250x500 mm

Water

Water Tanker 5 to 6 KL Capacity

Welding by electric plant

Well graded material for Sub Base Grading I, 2.36 mm below @ 30 percent

Well graded material for Sub Base Grading I, 53 mm to 9.5 mm below @ 50 percent

Well graded material for Sub Base Grading I, 9.5 mm to 2.36 mm below @ 20 percent

Wire nails