REPAIR AND MAINT OF CERTAIN MAP AND OTHER WOODEN FURNITURE INCLUDING RECANNING AT GE IMA DEHRADUN

Amount

Repair/Relacement of following U/S parts of "Push Back Sliding Chairs/Tip Up" with suitable new parts of existing shape & size complete to match the original and directed by Engr-In-Charge:-

S&F suitable new PU Foam (seat )(UOD) size 440x430x90 mm & 18 density. (Make-Sleepwell/ Kurl-on)

S&F suitable new leather cloth (seat ) (approved type/ design/ colour) and shall be not less than 250/- per RM.

S&F suitable new PU Foam (back )(UOD) size 535x440x65 mm & 18 density.

S&F suitable new leather cloth (back ) (approved type/ design/ colour) shall be not less than 250/- per RM.

S&F suitable new hand rest of existing shape & size with suitable nuts & bolts .

S&F suitable new 1.25mm thick floated aluminium beading (seat & back) of size 19x19x18 mm gauge with suitable nuts & bolts.

S&F suitable new pulling springs with sliding mechanism alongwith suitable nuts & bolts as to match with the existing tip up chairs.

Tightening of complete chair by use of suitable size screw/nails/ fastener as directed by Engr-in-Charge at site.

M&L for Two coats of painting of synthetic enamel paint on frame of tipup chair with high class finishing including numbering of chair / welding and smoothness of surface.

Repair/Relacement of following U/S parts of "Bed Hard Steel frame with plytop MAP" with suitable new parts of existing shape & size complete to match the original as per drg no FD/E6/MAP/8 ( R) and directed by Engr-In-Charge:-

S&F suitable new headrest made out of 18mm prelaminated MDF board of exterior grade fixed with screws with 2mm thick PVC edging.

S&F suitable new footrest made out of 18mm prelaminated MDF board of exterior grade fixed with screws with 2mm thick PVC edging.

S&F suitable new 12mm thick BWR phenol bonded commercial ply of size 1980x900mm , fitted with suitable nut & bolt.

S&F suitable new hard Rubber Shoes of 38x38mm as approved by GE.

M&L for Two coat painting of synthetic enamel paint on bed hard steel frame with high class finishing including necessary scrapping/ welding and smoothness of surface.

Repair/Relacement of following U/S parts of "Chair Writing MAP/Chair Visitor" with suitable new parts of existing shape & size complete to match the original as per drg No FD/E6/MAP/12 and directed by Engr-In-Charge:-

S&F suitable size new 12 mm thick hot pressed plywood, complete to match the original seat as shown on drg.

S&F suitable new fabric & moulded polyurethane foam of 50mm thick with 32 density for seat.

S&F suitable new tapestry cloth of existing shape & size complete to match the original. (Cloth shall be not less than 300/- per RM as approved by GE) alongwith PVC lipping all round the seat.

S&F suitable size 12 mm thick hot pressed plywood, complete to match the original back as shown on drg.

S&F suitable fabric & moulded polyurethane foam cushion 50mm thick & 32 mm density for back

S&F suitable new tapestry cloth of existing shape & size complete to match the original. (Cloth shall be not less than 300/- per RM) alongwith PVC lipping all round the back.

S&F suitable size new armrest made of black integral skin polyurethane & hardness with nuts & bolts.

S&F suitable new rubber stopper.

M&L for Two coat painting of synthetic enamel paint on frame of chair writing/chair visitor with high class finishing including necessary scrapping / welding and smoothness of surface.

Repair/Relace of following U/S parts of "Computer chair revolving/high back and med back" with suitable new parts of existing shape & size complete to match the original as per drg no FD/E6/MAP/01 and directed by Engr-In-Charge :-

S&F suitable size new 12 mm thick hot pressed plywood complete to match the original seat as shown on drg.

S&F suitable size new fabric & moulded polyurethane foam of 50mm thick with 32 density for seat.

S&F suitable new tapestry cloth/leatherite rexine of existing shape & size complete to match the original as shown on drg. (cloth/rexine shall be not less than 300/- per RM) alongwith PVC lipping all round the seat.

S&F suitable size new 12 mm thick hot pressed plywood complete to match the original back as shown on drg.

S&F suitable new fabric & moulded polyurethane foam of 50mm thick with 32 density for back.

S&F suitable new tapestry cloth/leatherite rexine of existing shape & size complete to match the original as shown on drg. (cloth/rexine shall be not less than 300/- per RM) alongwith PVC lipping all round the back.

S&F suitable size new armrest made of black integral skin polyurethane & hardness with nuts & bolts.

S&F suitable hydraulic system with droplift mechanism of backrest adjusted as per existing shape & size.

S&F suitable MS bearing of existing shape & size of various type chair revolving steel .

S&F new wheeled 4/5 prong base of existing shape & size with nut & bolts to chair revolving steel of various types.

S&F suitable caster wheels of existing shape & size with nut & bolts.

M&l forTwo coat painting of synthetic enamel paint on frame of Chair computer with high class finishing including necessary welding and smoothness of surface.

Repair/Relacement of following U/S parts of "Table Dressing (Gents)" with suitable new parts of existing shape & size complete to match the original as per drg no FD/E6/MAP/16 and directed by Engr-In-Charge :-

S&F suitable new 5mm thick looking mirror (Make- Saint Gobin/ Modi Guard) with back supported by 06mm plywood of existing shape & size with suitable nut & bolts.

S&F suitable new 12mm thick back ply of box .

S&F new top/base of table dressing made out of 18mm prelaminated MDF board of exterior grade ,one side teak finish and other side white.

S&F new side planks of table dressing made out of 18mm prelaminated MDF board of exterior grade ,one side teak finish and other side white.

S&F of new piano hinges and one nos magnetic catcher as shown on drg.

S&F of new 05 mm plain glass self in table dressing as shown on drg.

S&F complete new beading of 4mm thick and fixed with headless nail.

Tightening of complete table by suitable size nails as directed by Engr-in-Charge at site.

M&L for two or more coat french polish with high class finishing as specified.

Repair/Relacement of following U/S parts of "Charpoy Hard Top" with suitable new parts of existing shape & size complete as per drg no FD/MAP-II/01 and directed by Engr-In-Charge :-

S&F suitable new 12mm thick BWR phenol bonded commercial ply of size 1980x900mm , fitted with suitable nut & bolt.

S&F suitable new hard Rubber Shoes of 32x32mm as approved by GE.

M&L for Two or more coats spray painting of synthetic enamel paint on charpoy hard top frame with high class finishing including necessary scrapping/ welding and smoothness of surface.

Repair/Relacement of following U/S parts of "Chair Dining JCO's /ORs" with suitable new parts of existing shape & size complete to match the original as per drg no FD/MAP-II/05 and directed by Engr-In-Charge :-

S&F of new 4mm thick PVC seat with holes not less than 0.500 kgs alongwith wooden support in the middle as directed by Engr-in-Charge. (Make-Supreme/Cello/Neel Kamal)

Rubber shoes

Front leg (teak wood)

Rear legs (teak wood)

Front/rear rail (teak wood)

Stiffeners.

Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge at site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relace of following U/S parts of "Table Bed Side" with suitable new parts of existing shape & size complete to match the original as per drg no SK-572, FD-248, FD-276 and directed by Engr-In-Charge :-

S&F new side planks of size 230x510mm, made out of 18mm prelaminated MDF board of exterior grade ,one side teak finish and other side white with 4mm thick half round teak wood beading as per drg.

S&F new top of size 230x450mm, made out of 18mm prelaminated MDF board of exterior grade ,one side teak finish and other side white with 4mm thick half round teak wood beading as per drg.

S&F new 6mm thick back ply of size 510x450mm as per drg.

S&F new drawer made out of 12mm prelaminated MDF board of exterior grade with bottom of drawer 6 mm thick plywood as shown in drg.

S&F new shelf made out of 18mm prelaminated MDF board of exterior grade ,one side teak finish and other side white with 4mm thick half round teak wood beading as per drg.

S&F new knobs for drawers as approved by GE.

Tightening of complete table bed side by suitable size nails as directed by Engr-in-Charge on site.

M&L for two or more coat french polish with high class finishing".

Repair/Relacement of following U/S parts of "Table Dressing (ladies) with Stool " with suitable new parts of existing shape & size complete to match the original as per drg no FD/MAP-II/07 and directed by Engr-In-Charge. :-

S&F suitable new electro copper plated mirror of polished sheet glass of first class quality ISI marked size 1220x380x5mm thick as approved by GE.

S&F suitable new drawer of preleminated MDF board 18mm thick exterior grade including both side sliding channel with 4mm thick half round teak wood beading.

S&F suitable new frame of first class hard wood (Teak) including 6mm thick ply wood for back side of mirror duly fixed with frame as per drg and as directed by Engr-in-Charge

S&F suitable new top of table dressing ladies (box) of prelaminated MDF board of 18mm thick one side teak finish and other side white with 4mm thick half round teak wood beading.

S&F suitable new side planks of table dressing (box) of prelaminated MDF board of 18mm thick one side teak finish and other side white with 4mm thick half round teak wood beading.

S&F suitable new door plank of table dressing (box) of prelaminated MDF board of 18mm thick one side teak finish and other side white with 4mm thick half round teak wood beading.

S&F suitable new bottom (box) of 12mm thick plywood as shown on drg.

S&F suitable new stainless steel piano hinges and one nos magnetic catcher as shown on drg.

S&F suitable new 50 mm long 'D' shaped stainless steel handle as approved by GE.

S&F suitable new 75 mm long 'D' shaped stainless steel handle as approved by GE.

S&F suitable new bottom of 06mm thick plywood for stool dressing (box) as shown on drg.

S&F suitable size new 12mm thick ply openable shutter for stool dressing (box) as shown on drg.

S&F suitable size new cushion foam of 75mm thick and 40 density covered with leatherite cloth for stool dressing (box) as shown on drg as approved by GE.

S&F suitable new heavy duty revolving nylon double wheels for stool dressing (box) as shown on drg.

S&F suitable size new front plank for stool dressing (box) of prelaminated MDF board of 18mm thick one side teak finish and other side white with 4mm thick half round teak wood beading.

S&F suitable size new back plank for stool dressing (box) of prelaminated MDF board of 18mm thick one side teak finish and other side white with 4mm thick half round teak wood beading.

S&F suitable size new wooden battern (1" x 1")

S&F suitable size new side plank for stool dressing (box) of prelaminated MDF board of 18mm thick one side teak finish and other side white with 4mm thick half round teak wood beading.

Tightening of complete table dressing by suitable size nails as directed by Engr-in-Charge at site.

M&L for two or more coats french polishing with high class finish to complete side as per existing shape and size in drawing as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Chair Dining Long Back" with suitable new parts made out of (teak wood) as per existing shape & size complete to match the original as per drg no FD-357 and directed by In-Charge :-

Front legs

Rear legs

Stiffeners

Back straps

Front /side rails

Rubber shoes

S&F suitable size new 12 mm thick commercial plywood, complete to match the original seat as shown on drg.

S&F suitable size new foam of 50mm thick and 32 density covered with markeen cloth for seat.

S&F suitable new leatherette rexine of existing shape & size complete to match the original seat (rexine shall be not less than 350/- per RM).

S&F suitable size new 12 mm thick commercial plywood, complete to match the original back as shown on drg.

S&F suitable size new foam of 50mm thick and 32 density covered with markeen cloth for back.

S&F suitable new leatherette rexine of existing shape & size complete to match the original back (rexine shall be not less than 350/- per RM).

Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge at site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Chair Easy FD" with suitable new parts made out of (teak wood) existing shape & size complete to match the original as per drg no FD-229 and directed by Engr-In-Charge:-

Front/Rear legs

Side rails (including holes for caning)

Front/Rear rails (including holes for caning)

Arm/Handles

Stiffeners

Rubber shoes

Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge at site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Chair Easy DC" with suitable new parts made out of (teak wood) existing shape & size complete to match the original as per drg no DB-3972 and directed by Engr-In-Charge:-

Front legs

Rear legs

Front /back rails (including holes for caning)

Side rails (including holes for caning)

Arm/Handles

Stiffeners

Rubber shoes

Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge at site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Chair Dining FD" with suitable new parts made out of (teak wood) existing shape & size complete to match the original as per drg no FD-279 and directed by Engr-In-Charge:-

Front legs

Rear legs

Front/ back rails (including holes for caning)

Side rails (including holes for caning)

Stiffeners

Rubber shoes

Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge at site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Chair Writing FD" with suitable new parts made out of (teak wood) existing shape & size complete to match the original as per drg no FD -202,250, 280 and directed by Engr-In-Charge:-

Front legs

Rear legs

Front/ back rails (including holes for caning)

Side rails (including holes for caning)

Arm/Handles

Stiffeners

Rubber shoes

Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge at site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Chair Writing SK with cushion" with suitable new parts made out of (teak wood) existing shape & size complete to match the original as per drg no SK 573 and directed by Engr-In-Charge :-

Front legs

Rear legs

Front rails for seat

Side rails for seat

Arm/Handles

Stiffeners for seat & back

Rubber shoes

Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge at site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

S&F suitable size new cushion foam (seat) 75mm thick and 40 density alongwith velvet cloth cover and TKK chain fixed having cost of cover not less than Rs. 300.00 per mtrs all as shown on drg and as directed by Engr- in- charge.

Repair/Relacement of following U/S parts of "Stool Dressing" with suitable new parts made out of (teak wood) existing shape & size complete to match the original as per drg no FD 252, 282 and directed by Engr-In-Charge:-

Stiffeners

Side rails (including holes for caning)

Rubber shoes

Tightening of complete stool by suitable size nails & wood corner as directed by Engr-in-Charge at site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Chair Easy with two cushion seat & back" with suitable new parts made out of (teak wood) existing shape & size complete to match the original as per drg no SK 574 and directed by Engr-In-Charge:-

Front/rear legs

Front/back rails for seat

Side rails for seat

Wooden plank for seat & back

Side rails for back

Arm/Handles

Stiffeners

Rubber shoes

Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge at site.

S&F suitable size new cushion foam (seat & back) 75mm thick and 40 density alongwith velvet cloth cover and TKK chain fixed having cost of cover not less than Rs.300.00 per mtrs all as shown on drg and as directed by Engr- in- charge.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Table Writing Clerk SK with drawer" with suitable new parts made out of (teak wood) existing shape & size complete to match the original as per drg no SK 571 and directed by Engr-In-Charge :-

S&F new top of 18mm prelaminated MDF board of exterior grade size 1145x600mm with 4mm thick half round beading all round of table top as directed.

Leg (35x35x760mm)

Long rails at bottom

Short rail at top

Stiffeners

S&F suitable size new sides of box made of 18mm thick MDF board as per drg and directed by Engr-In-Charge.

S&F of new door made of 18mm thick MDF board fixed with suitable piano type hinges alongwith 04mm thick teak wood beading as per drg and directed by Engr-In-Charge.

S&F suitable size new self of 18mm thick MDF board as per drg and directed by Engr-In-Charge.

S&F suitable size new CPU box of 18mm thick MDF board at the bottom of table as per drg and directed by Engr-In-Charge.

S&F suitable size new centre leg (150 to 200mm long) of teak wood as directed by Engr-In-Charge.

S&F suitable size new knobs of approved by GE.

S&F suitable size complete new drawers of 18mm thick MDF board with knob as per drg and directed by Engr-In-Charge.

S&F suitable size new back ply of 6mm thick as per drg and as directed by Engr-In-Charge.

S&F suitable size new key board drawer of 18mm thick MDF board with both side sliding channel as per drg and directed by Engr-In-Charge.

Rubber shoes

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Chair Dining Special " with suitable new parts made out of teak wood existing shape & size complete to match the original as per drg No PN/F/26 and directed by Engr-In-Charge :-

Front legs

Rear legs

Front / rear rail (including holes for caning)

Side rail (including holes for caning)

Arm/handle

Stiffener

Rubber shoes

Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge :-

Repair/Relacement of following U/S parts of "Hat Stand" with suitable new parts of existing shape & size complete to match the original as per drg No FD-23, 233, 362 and directed by Engr-In-Charge :-

S&F 4mm thick teak face decorative plywood fixed with fevicol tipped with teak wood edging all round size 1330x710 mm as per drg and as directed by Engr-in-Charge.

S&F of Mirror of size 300x440x5.5mm thick as per drg.

S&F of Aluminium Peg set 120 mm with ISI mark.

M&L for two or more coat french polish with high class finishing.

Repair/replacement of following u/s parts of " Table bed side MAP" with suitable new parts of existing shape & size complete to match the original as shown on drg no FD/E6/MAP/15 and all as directed by Engr-In-Charge :-

S&F new top of existing size made of 18mm prelaminated MDF board with 4mm thick teak wood half round beading all round of table top as per drg and directed.

S&F new small drawers of existing shape and size made of 18mm prelaminated MDF board with 4mm thick teak wood half round beading and 12 mm thick commercial ply wood for bottom including CP handle as per drg & directed.

S&F new large drawers of existing shape and size made of 18mm prelaminated MDF board with 4mm teak wood half round beading and 12 mm thick commercial ply wood for bottom including CP handle as per drg & directed.

S&F suitable size new back/base of table bed side, made out of 6 mm thick commercial ply wood duly screwed as shown on drg and as directed.

S&F suitable size new sides of table bed side, made out of 18mm thick prelaminated MDF board duly screwed as shown on drg and as directed.

S&F of new hard rubber shoes (black) to legs of table bed side MAP as approved by GE.

Repair/repalcement of old u/s front legs of table bed side with new front legs made out of 18mm MS square pipe (18 gauge) as shown on drg and as directed.

Repair/repalcement of old u/s rear legs of table bed side with new front legs made out of 18mm MS square pipe (18 gauge) as shown on drg and as directed.

Tightening of complete table by suitable size nails & screw as directed by Engr-in-Charge at site.

M&L for two or more coats french polish and synthetic enamel black paint on wooden/steel frame surface with high class finish including necessary rubbing, denting, welding and smoothness surfaces all as directed by Engr- in-charge.

Repair/Relacement of following u/s parts of "Chair dining MAP Officer" with suitable new parts of existing shape & size complete to match the original as per drg no FD/MAP-II/04 and directed by Engr-In-Charge :-

S&F of front legs made of Ist class teak wood as per drawing and as directed by Engr-In-Charge.

S& F of rear legs made of Ist class teak wood as per drawing and as directed by Engr-In-Charge

S& F of stiffeners made of Ist class teak wood as per drawing and as directed by Engr-In-Charge.

Replacement of old torn u/s cloth of seat with new cloth of best quality not less than Rs. 400.00 per mtr as approved by GE, alongwith new markeen cloth of matching colours as per drg or as directed.

Repair/Replacement of u/s plywood of seat with 6mm new comercial plywood as per drg or as directed.

Replacement of u/s foam of seat with new foam of 75mm thick with 40 density and fixing it with seat as per drg and as directed.

S&F of new hard rubber shoes (white) to legs of chair dining Map Officer as approved by GE.

Tightening of complete chair by suitable size nails & wood cornder as directed by Engr-in-Charge at site.

M&L for two or more coats french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed.

Re-canning of all type wooden/steel furniture items with 2.00mm wide and 0.6mm thick half and round white plastic cane. The canning work shall be done in Godrej pattern as specified and directed by Engr-in-Charge.

Repair and re-canning of "Chair varandha" as per existing shape & size complete to match the original as per drg no FD-256 and all directed by Engr-In-Charge :-

Re-canning of chair verandah with 4/5mm wide and 0.6mm thick half round superior quality white plastic cane, including painting with two or more coats of white synthetic enemel paint on entire steel/iron surfaces of chair before re-canning & including provn of new PVC shoes 20mm dia at bottom of legs.

Tuck welding to broken legs and frames of chair verandah

M/SDoon furnishers

VARAROHA BUILDERS

M R Taders