Notified Area offiec Ankleshwar

Name of Work: Replacement of old 150W HPSV street light fitting &

pole with new Decorative type LED Street light

fitting & pole From Police Station to Kapodara

Patiya Road at NA, GIDC, ANK.

Item Description Qty. Unit Amount

Supplying and erecting approved make Tubular

Decorative Type Street light pole made from HR

sheet steel. The pole should be made as per IS.

And Shall be coated with hot dip galvanizing as

per IS 2629/2633/4759, painted with one coat of

red oxide and one coat of PU paint, suitable

suspended local wind speed with integral Junction

box consist of terminal plate of min 6 mm hylam

sheet, standard profile 35mmX7.5 mm Din-Rail for

MCB Mounting, Stud type terminal and

Arrangement for cable termination to be erected

on foundation as per details given by

manufacturers considering site requirement. Pole

Must be Painted with Powder Coated with PU

Paint / Spray painting with PU paint after Chemical

Treatment and Zinc reach epoxy primer. Color

code of Pole is decided by Engineer in charge.

(A) 8.5 Mtr Height, 114.3 dia X 3.5 mm thick

Top, 139.7 dia X 4.5 mm thick Top 165.1 X

mm dia bottom pipe having 110 X 300 mm door

for termination and 300 mm X 300 mm X 12 mm

Base plate, 4-M20 bolts and 600 mm long J-

Providing and erecting Street Light Pole

Decorative type bracket comprising main B class

MS Hot Dip Galvanized of minimum 85 Microns

pipe of 4.2 cm/require outside dia. Complete with

Suitable B Class MS sleeve tubing of approx.

cms Length and suitable for pole top having

sufficient fastener for fixing the brackets and

having spread of 1.4 mtr as per Instruction given

2 by engineer in charge, suitable welded stays, 60 3632.97 No

reducer and with GI check nuts complete. Bracket

Must be Painted with Powder Coated with PU

Paint / Spray painting with PU paint after Chemical

Treatment and Zinc reach epoxy primer. Color

code of Pole is decided by Engineer in charge with

following nos of arms.

A) Double Arm Bracket 1.4 Mtr

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR

Supplying and erecting LED Street Light/Flood

Light fittings with High Power White LEDs wattage

of 1 Watt and above assembled on single

MCPCB, efficiency more than 130lm/W and

Corrosion free High Pressure die cast aluminum

housing with smooth finish powder coated and

heat sink extruded aluminum with diffuser and

polycarbonate optics/lenses with company

mark/name engraved or embrossed 120 to 300 V,

Power factor more than .95, THD<10%, CCT

K to 5700K, Uniformity ratio >0.45,Luminaire

efficiency > 100 lumens/watt. LED driver

efficiency>85% CREE/OSRAM/PHILIPS

3 lumilds/NICHIA/SEOUL/Bridge lux (USA) make 120 7575.00 No

LED used for luminaire. ( fittings required LM-79 &

LM-80 certificates) (Note: below description have

show room ranges of wattage capacity of LED

fittings. The Enginneer in charge may select any

Wattage capacity between the ranges shown.)

Street Light (IP-66), Surge protection - 4KV

integral and 10KV non integral, light must have

440VAC line supply protection. It should with

stand 48 hours for 440VAC line supply. Over

Voltage Shut down for mains voltage > 320 V with

auto- recovery feature. Toughened glass with >

4mm thickness for better impact resistance.

(warranty Period 5 Year) For 90W LED

Providing and erecting XLPE (IS:7098)(I)-88 ISI

marked armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

4 necessary clamps or in existing cable trench / 2000 153.52 Mtr

pipe at road crossing or floor of following size of

cables -- 4 core 16 Sq-mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmored copper cable 1.1 KV grade to be

5 erected as directed of following size. 3 Core 2.5 1200 137.36 Mtr

Making trench in soft soil of suitable width of

cms deep for laying cable or locating the fault all

6 over the run and backfilling the same and making 2000 55.55 Rmt

the surface as normal ground. Up to 25 mm2

Making trench in hard murrum/Tar Road of

suitable width of 90 cm or required depth for laying

any size of cable or locating the fault all over the

7 run and back filling the same and making the 300 432.28 Rmt

surface as normal ground. If Additional machinery

like hammer driller or JCB use(Add)

Drilling the road without breaking the road surface

(Asphalt) for laying of cable for feeding power

8 supply by making upto 150mm dia. size of holes 250 616.10 Mtr

at both ends complete.

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR

Providing & laying. Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories

9 of same material at required depth for laying of 2000 62.62 Rmt

cable. below ground / road surface for enclosing

cable and back filling the same to make ground as

per original. 50 mm dia.

Providing & laying approved make ISI marked

HDPE 6 Kg/cm2 (class-3) as per IS:4984:1995

10 PE-80 to be erected at road crossing on or floor as 277 249.47 Mtr

directed for laying of cable. The pipes as following

size of dia & weight per 6 mtr. 63 mm inner dia.

Painting & numbering of street light pole with

11 bracket complete with two coats of Aluminum paint 60 357.54 No

for following size of pole. [c] upto 9 mtr

Construction of RCC Foundation for

12 Octagonal/GRP Pole with Anchor Bolts, as Per 60 6666.11 No

Drawings and Specification

Providing and casting in situ CC in grade M-20

(Proportions as per table 9 of IS456 2000 in

masses by weigh batching) using granite, quartze

trap metal of size 6 mm to 20 mm for RCC work,

including scaffolding centering, formwork, needle

13 vibrated consolidation, curring complete up to 6 30 8187.06 Cum

meter depth of height (excluding cost of

reinforcement and heat finishing) with centering

and shuttering/de-shuttering etc complete for

structure other than water retaiing (below G.L)

Footing (with out form work)

Providing and erecting 240 V MCB double pole

switch for motor & inductive load (C curve) having

14 10KA breaking capacity & confirms to IS: 8828 in 120 278.76 No

existing box having following capacity. A) 6 to

Solder less crimping type Aluminum lugs

conforming to IS Suitable for Cable of following

size evenly crimped with high pressure tools &

15 connected to switchgear terminals with 695 15.15 No

brass/cadmium plated nut bolts in an approved

manner. 16/25 Sq.mm.

Pipe type earthing having 150 cms.long and

cms. dia. galvanized iron pipe with coupling and

buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

Dismantling/ Cutting of Existing Street Light pole

17 up to 9 meter height with bracket and fitting with 50 452.48 No

Hiring of tractor with Trolley, driver, diesel etc only Per

for minimum 8 hr working per day. Day

Approved make Four Pole LT Heavy Duty Switch

Disconnector Fuse Unit Cubical type for panel

19 mounting complete with operating mechanism 3 6120.60 No

suitable to operate on 415V A.C. With HRC fuses

of suitable load confirming to IS. 13947 (Part I &

III). of following capacities. Cat-III 125 Amp

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR

Supply and fabrication of Street light three phase

Iot GSM/GPRS Central Control & Monitoring

System (CCMS) Control Panel with all switch

gear, bus-bar, 1 nos LCD Display, Energy Saving

Feature and Spare Relay facility having 10 years

of reserve battery for RTC with 50 programmable

schedule, month-wise offset settable facility,

astronomic sunrise/sunset time programing inbuilt

for yearlong schedule. Operating voltage @440 V

ac with over voltage & short circuit protection.

hours battery backup for street light controller.

Panel to have 1 nos of 3 phase- class 1 Energy

Meter for Energy & fault monitoring on CCMS web

dashboard. power and control wiring etc complete

as per specification given, panel Enclosure

fabricated in MS 14 Gauge sheet & Enclosure size

is 1000 mm x 1000 mm x 500 mm with 500 mm

height mounting stand with double door type. All

incoming and outgoing cable termination should

be suitable for ring type lugs termination, Panel

suitable for 4 Nos out going circuits for 4 C x

Sq.mm cable and 1 Nos incoming cable of size 4C

x 50 Sq.mm with following switch gear complete

connection. Panel suitable for outside open area

installation and whether proof with canopy, Panel

should be design with Double door with two

20 separate compartments with two inner door for 3 100427.33 No

cable termination and switch gear. Panel Having

IP65 Rating. Local communication facility via

mobile application in case of GPRS connectivity

63 Amp Four Pole MCCB 36KA with thermal

magnetic Release -- 01 No

R-Y-B Indication Lamp 230 V AC

1 Nos 4 Pole ELCB

Door Switch for unauthorized access & tamper

Detection & Accelerometer for panel movement

detection &tamper alert

3 Nos of 3 Pole Contactor (ML-2 32A AC3 X

CCMS Controller with timer -

2 Pole 2way Selector switch - 01 No

6A Control SP MCB, 10KA -01 No

O/G 32 A SP MCB, 10 KA - 16 No

Power terminal CBT /KBT type - 20 No's

Power Wiring 16 SQ.mm,25 Sq.mm, and

Sq.mm copper flexible cable

1 Nos 4g / 5G Sim with slot with necessary data

5 Year Cloud Server Subscription

R&B Electrical SOR 2-20-1 P.no. 65-66

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR

I / We hereby agree carry out the I / We hereby agree carry out the work

work at the rate given in Schedule B at the rate given in Schedule B @ ______

@ _______ % above. % below.

Net Amount Rs. _______ Net Amount Rs. _______

Important Note:

1. The rates offered shall be inclusive of all applicable taxes (1% LWC, ESIC, PF,

packing, forwarding, insurance, loading, unloading, shifting & transportation at

store/ site of work at Ankleshwar Notified Area.)

The rates offered by Bidder shall be Exclusive of GST.

2. I/We have read the conditions mentioned in this tender & agree to abide by the

3. Please note that the agency in whose favor the tender is finalized by the

competent authority shall have to submit the document like insurance of the staff

engaged RPFC No. Labour license etc. and documents for vehicle.

4. The successful bidder in whose favor the tender is finalize by the competent

authority has to enter in to an agreement with Notified Area office in B-1

agreement form, the conditions & clauses of the agreement shall be binding to the

agency. If the bidder desires to study the same, the same is available in the office

of the Notified Area Officer, GIDC, and Ankleshwar during office hours of the

5. 1% labour welfare cess on the bill amount will be deducted from the each RA bill

as per Govt. norms.

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR