BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

Total Amount Rs.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Making trench in Hard Murrum / Tar Road of suitable width of

cms or required depth for laying any size of cable or locating the

fault all over the run and back filling the same and making the

surface as normal ground.

Erecting, testing, commissioning of M.S. Polygonal High Mast Pole

having following general Specification.

High Mast 16 Mtr. TOP A/F 150 mm, BOTTOM A/F 450 mm, No. of

2.00 Sec. No. - 2, Bottom Thickness - 4 mm, Top Sec. 3 mm, Size of Base 1.00 Each. 20116.17

Plate - dia.560 mm x 20 mm thick, Foundation Bolt Size M24 x

mm, Qty - 8 Nos., Suitable for mounting Fitting of Light - 8 Nos.

Supplying, installing, testing and commissioning new providing and

3.00 erecting highmast winch upto 200 kg load carrying capacity for 16- 1.00 Each. 13720.85

20 mtr. High mast (as per requirement)

Supplying, installing, testing and commissioning foot mounting

4.00 motor 1 HP for sucessful operation of 16-20 mtr high mast head 1.00 Each. 9832.35

frame up-down (As per requirement)

Supplying, installing, testing and commissioning highmast SS iwre

rope of 6 mm thickness per mtr. (As per requirement)

Supplying, installing, testing and commissioning new 2 way wire

6.00 system head frame with hot deep galvanising suitable for 16-20 1.00 Each. 8526.93

mtr. Highmast (As per requirement)

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 90 x 90 x 180 cm.

Deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm

dia x 45 cm) high upper level ground cement concrete with

necessary curing and finishing in approved manner

[above 11 mtr & above poles]

Supplying and erecting Flexible PVC insulated multistrand multicore

1.1 kv grade ISI marked copper wires of following size to be erected

h) 2.50 Sq.mm 3 core round PVC sheathed

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

9.00 with necessary clamps or in existing trench / pipe of following size 60.00 R.Mt. 217.15

(A-1) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

“ B ” class Galvanised iron pipe having smooth finished bore of the

pipe on both ends erected nuts and bolts along the pole / wall

10.00 shaping the pipe as per site requirement. Pipe dia as following. 3.00 R.Mt. 249.47

(c ) 40 mm dia.

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.

(b) 3x1/2 core 35/50 Sq. mm

Cast iron earth plate size 30 X 30 X 0.35 cms. buried in specially

prepared 2.5 Mtr. deep earth pit complete with necessary G.I. strip

in G.I. pipe 2 Mtr. long with coupling and G.I. plug for earthing of

switch gear, conduit run or power plug etc.

ADD Extra for excavation in Hard rock by dry and wet blasting and

chiselling for funnel type earthing of above .

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD

MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF HIGH MAST LED LIGHT POLE AND ALIED WORK AT VANIYAVAD CIRCLE AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

For using salt and charcoal / coke as required for pipe type

15.00 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 2.00 Kg. 794.87

Supplying & erecting IP 55 grade following size section pillar

fabricated from joint less M.S. Sheet with angle iron legs made from

jointless M.S. Angle with cable clamps to be buried in ground to

have appropriate erection to work uniform until erected with

cement concrete foundation and 45 cms high bricks work finishing

with plaster etc. hinged double door internally supported on both

side, with internal and outside looking arrangement with look and

keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting bakelite sheet.

Painting the Section Pillar inside and out side with three tank

powder coated paint. section pillar roof should be without joint

with water leakage proof & tested as per IP 55 test & followed by IS

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Guage MS

Sheet with angle iron legs 95 cms long made from 40 X 40 X 6 mm

thick MS angle.

Supplying and erecting bakelite sheet 8mm thick HYLAM make on

existing angle iron frame.

Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V. having normal current

18.00 rating up to 125A. with Fixed thermal & magnetic release suitable 1.00 Nos. 8055.76

to work on A.C.supply 50 c/s. with all internal connections &

complete erected in existing 16 G.M.S. housing.

Supplying & erecting power contactor for time switch complete

19.00 erected as per direction Cat III 1.00 Nos. 2782.55

[D] 4 pole 440V 40 Amp.

Erection & connection Charges for 63A/100A TP as following

(b) Erection on angle iron frame duly painted with Red Oxide

Providing and erecting busbar chamber confirming to IS-375

fabricated from 16 G.M.S. sheet, dust & vermin proof having hinged

door with rubber gasket and necessary busbar supports with

COPPER busbar having current density not more than 1.6 Amp. /

sq.mm (Rated current / cross section area) duly wrapped with

colour insulation tape for phase sequence, three phase & neutral

each suitable for following current capacity with necessary painting

mounted on wall or pedestal frame of required size with necessary

(B) Suitable for 200 Amp. capacity

Providing Approved make Triple Pole Metal Clad Switch Fuse Unit

415/500 V. with HRC fuse of suitable load and neutral link

confirming to IS.

(a) 32 A Cat III

Providing and fixing Terminal board of size 5.0 x 127 x

mm.bakelite sheet with 15 Amp. kitkat pattern porcelain fuse unit

23.00 with suitable brass studs with nuts, washers and clamps of size 1.00 Nos. 146.45

25mm x 3mm suitable for pole painted with one coat of red lead

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD

MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF HIGH MAST LED LIGHT POLE AND ALIED WORK AT VANIYAVAD CIRCLE AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Providing and erecting cable clamp of 25 mm X 3 mm M.S. flat

24.00 suitable for fixing 2 Nos.of armoured cable with nuts and bolts. 2.00 Nos. 112.11

(c) for 140 mm dia. Pole

Providing & laying ISI marked Rigid PVC pipe having 6Kg / cm2

(Class-3) to be erected at road crossing on or floor as directed for

25.00 laying of cable. The pipes as following size of dia & weight per 6 50.00 Rmt. 125.24

(D) 75 mm Dia. (5.5 Kg/6RMT)

Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised

26.00 iron pipe with coupling and buch buried in specially prepared earth 1.00 Nos. 368.65

pit complete with necessary 8 SWG earth wire.

Supplying and erecting approved make Segment time switch

suitable for 230V+10%16A. floating contacts with 24 hour dial

having15/30 min. segments with early manual override switching

for on & off without influencing the program sequence with quartz

time switch With power reserve, housed in fire proof thermoplastic

enclosure & transparent cover terminal covers erected as required

wire necessary connection erected as directed.

Solderless crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

28.00 connected to switchgear terminals with brass/cadmium plated nut 16.00 Nos. 20.20

bolts in an approved manner.

Solderless crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

29.00 connected to switchgear terminals with brass/cadmium plated nut 4.00 Nos. 15.15

bolts in an approved manner.

Consulting Civil Engineer City Engineer

DD (OPC) PVT LTD Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD

MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED FROM CHHAGESHWAR MAHADEV TO FATAK AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Making trench in Hard Murrum / Tar Road of suitable width of

cm or required depth for laying any size of cable or locating the

1.00 fault all over the run and back filling the same and making the 2160.00 R.Mt. 432.28

surface as normal ground. (B) If additional machinery like hammer

driller or JCB use [Add]

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With Suitable

foundation (Included) as per details given by manufacturer

considering site requirement.

(H) 9 Mtr. Long 70 mm Top X 155 mm bottom dia, 3 mm thickness

with 260mmX260mmX16mm base plate, 4-M24 Bolts and 750mm

long with necessary G.I. J Bolts .Approx Pole weight 97 kg

Providing and erecting Street Light pole bracket comprising main B

Class MS pipe of 4.2 cm/require outside dia. complete with

suitable B Class M.S. sleeve tubing of approx. 45cms.length and

suitable for 76.5 mm /80mm / required size of pole top having

sufficient fasteners for fixing the brackets and having spread of

1.5.mtr. length with 110 deg.with vertical plane & suitable welded

stays, reducer and with check nuts complete painted with one coat

of Red oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection.

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD

MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED FROM CHHAGESHWAR MAHADEV TO FATAK AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Supplying and erecting Flexible PVC insulated multi strand multi

core 1.1 kv grade ISI marked copper wires of following size to be

erected as directed.

(e) 1.50 Sq.mm 3 core round PVC sheathed

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

6.00 with necessary clamps or in existing trench / pipe of following size 2754.00 R.Mt. 140.39

(C) 4 core 10 Sq. mm

Providing and erecting Pipe type earthing having 150 cms.long and

2.5 cms. dia. galvanised iron pipe with coupling and buch buried in

specially prepared earth pit complete with necessary 8 SWG earth

For using salt and charcoal / coke as required for pipe type

Providing and erecting HOT deep Galvanised iron strip wire 8 to

Supplying & erecting IP 55 grade following size section pillar

fabricated from joint less M.S. Sheet with angle iron legs made

from jointless M.S. Angle with cable clamps to be buried in ground

to have appropriate erection to work uniform until erected with

cement concrete foundation and 45 cm high bricks work finishing

with plaster etc. hinged double door internally supported on both

side, with internal and outside looking arrangement with look and

keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite sheet.

Painting the Section Pillar inside and out side with three tank

powder coated paint. section pillar roof should be without joint

with water leakage proof & tested as per IP 55 test & followed by

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS

Sheet with angle iron legs 95 cm long made from 40 X 40 X 6 mm

thick MS angle.

Supplying and erecting HYLAM sheet on existing angle iron

11.00 frame.for following thickness 1.80 Sq.Mtr 1541.26

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 35 KA. at 415 V.

having normal current rating 125A. with Fixed thermal & magnetic

12.00 release suitable to work on A.C.supply 50 c/s. with all internal 2.00 Each. 8055.76

connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD

MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED FROM CHHAGESHWAR MAHADEV TO FATAK AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Supplying and erecting approved make Segment time switch

suitable for 230V+10%16A. floating contacts with 24 hour dial

having15/30 min. segments with early manual override switching

for on & off without influencing the program sequence with quartz

time switch With power reserve, housed in fire proof

thermoplastic enclosure & transparent cover terminal covers

erected as required wire necessary connection erected as directed.

Providing & erecting 415V MCB Four Pole Switch for Lighting Load

(B curve) having 10KA breaking capacity & confirms to IS :8828 in

existing box having following capacity (B) 40 Amp. Cat.III

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 60 x 60 x 150 cm.

Deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm

dia x 45 cm) high upper ground level with necessary curing and

finishing in approved manner.

( for 9 & 10 mtr pole)

Providing & laying approved make ISI marked HDPE 6Kg / cm2

(Class-3) as per IS:4984:1995 PE-80 to be erected at road crossing

16.00 on or floor as directed for laying of cable. The pipes as following 2592.00 Rmt. 163.62

size of dia & weight per 6 mtr.

(B) 50 mm inner Dia.

providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool

18.00 & connected to switchgear terminals with brass/cadmium plated 432.00 Each. 13.13

nut bolts in an approved manner.

Dismantling the existing pole above 6 m height with brackets,

clamps, insulators, stay from the cement concrete foundation and

making the site clear by refilling the pits with excavated materials

and bringing it to the ground level.

Consulting Civil Engineer City Engineer

DD (OPC) PVT LTD Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD

MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF HIGH MAST LED LIGHT POLE AT BUS STAND AREA AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cms or

required depth for laying any size of cable or locating the fault all over the

run and back filling the same and making the surface as normal ground.

Supplying, erecting, testing, commissioning approved make M.S. Polygonal

High Mast Pole having following general Specification.

(a) Polygonal Section fabricated from M.S. Plate confirms BSEN 10025 &

Hot deep galvanised minimum 65/86 micron (as per IS 01461) Lantern

carriage with ring and rubber lines for erection of luminaries of suitable

(b) Maximum telescopic section not more than four

(c) Double drum gear pipe motorised winch with 6mm dia S.S. Rod (For

mtr and above size)

(d) Approved make L.E.D. aviation light = 1 No. Lighting arrestor = 1 No.

with necessary wiring of 2.5 sq.mm 5 core ISI copper cable Unarmoured.

(e) Bottom most section suitable for mounting reversible motor and

switchgears having door not more than 1400mm x 300mm with

2.00 waterproof gasket & hinges & locking arrangement. 1.00 Nos. 184438.12

(f) Pole structure comprises suitable size of reversible motor, cable and

necessary switchgears with control panel.

(g) bottom section shall have suitable size of thickness supports ribs

foundation bolts nuts etc.

(h) Item not comprises the cost of lanterns.

(i) Necessary Cement Concrete foundation as per IS including testing &

commissioning of the entire structure for following size of High Mast poles

[4] High Mast 16 Mtr. TOP A/F 150 Mm, BOTTOM A/F 400 Mm, No. of Sec.

No. - 2, Bottom Thickness - 4 mm, Top Sec. - 3 mm, Size Base Plate -

dia.630 mm x 20 mm thick, Foundation Bolt Size M24 x 870 mm, Qty -

Nos., Suitable for mounting Fitting of Light - 10 Nos.

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 1Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/ lenses

with company mark/name engraved or embossed

120 to 300 V,Power Factor more than 0.95, THD < 10 %, CCT 5000 K to

Uniformity ratio >0.45, Luminaire efficacy> 85 lumens/watt . LED driver

efficiency > 85 %.

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.)

make LED used for luminaire. ( Each fittings required LM-79 & LM-80

(B) Flood Light (IP-65), Surge -4KV

Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv

grade ISI marked copper wires of following size to be erected as directed.

h) 2.50 Sq.mm 3 core round PVC sheathed

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD

MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF HIGH MAST LED LIGHT POLE AT BUS STAND AREA AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables

(A-1) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

“ B ” class Galvanised iron pipe having smooth finished bore of the pipe on

both ends erected nuts and bolts along the pole / wall shaping the pipe as

per site requirement. Pipe dia as following.

(c ) 40 mm dia.

Providing and, fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(b) 3x1/2 core 35/50 Sq. mm

Cast iron earth plate size 30 X 30 X 0.35 cms. buried in specially prepared

2.5 Mtr. deep earth pit complete with necessary G.I. strip in G.I. pipe

Mtr. long with coupling and G.I. plug for earthing of switch gear, conduit

run or power plug etc.

ADD Extra for excavation in Hard rock by dry and wet blasting and

chiselling for funnel type earthing of above .

10.00 For using salt and charcoal / coke as required for pipe type earthing. 1.00 Each. 171.70

11.00 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 2.00 Kg. 794.87

Supplying & erecting IP 55 grade following size section pillar fabricated

from joint less M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement concrete foundation

and 45 cms high bricks work finishing with plaster etc. hinged double door

internally supported on both side, with internal and outside looking

arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of

12.00 Two Nos. one is welded and other with nut and bolt for erecting bakelite 1.00 Each. 16691.26

sheet. Painting the Section Pillar inside and out side with three tank

powder coated paint. section pillar roof should be without joint with

water leakage proof & tested as per IP 55 test & followed by IS 2147 of

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Guage MS Sheet

with angle iron legs 95 cms long made from 40 X 40 X 6 mm thick MS

Supplying and erecting bakelite sheet 8mm thick HYLAM make on existing

angle iron frame.

Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having normal current rating up to 125A.

14.00 with Fixed thermal & magnetic release suitable to work on A.C.supply 50 1.00 Nos. 8055.76

c/s. with all internal connections & complete erected in existing 16 G.M.S.

Supplying & erecting power contactor for time switch complete erected as

15.00 per direction Cat III 1.00 Nos. 2782.55

[D] 4 pole 440V 40 Amp.

Erection & connection Charges for 63A/100A TP as following

(b) Erection on angle iron frame duly painted with Red Oxide

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD

MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF HIGH MAST LED LIGHT POLE AT BUS STAND AREA AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Providing and erecting busbar chamber confirming to IS-375 fabricated

from 16 G.M.S. sheet, dust & vermin proof having hinged door with rubber

gasket and necessary busbar supports with COPPER busbar having current

density not more than 1.6 Amp. / sq.mm (Rated current / cross section

17.00 area) duly wrapped with colour insulation tape for phase sequence, three 1.00 Rmt. 5731.75

phase & neutral each suitable for following current capacity with necessary

painting mounted on wall or pedestal frame of required size with

necessary connections.

(B) Suitable for 200 Amp. capacity

Providing Approved make Triple Pole Metal Clad Switch Fuse Unit 415/500

V. with HRC fuse of suitable load and neutral link confirming to IS.

(a) 32 A Cat III

Providing and fixing Terminal board of size 5.0 x 127 x 152.4 mm.bakelite

sheet with 15 Amp. kitkat pattern porcelain fuse unit with suitable brass

studs with nuts, washers and clamps of size 25mm x 3mm suitable for pole

painted with one coat of red lead paint.

Providing and erecting cable clamp of 25 mm X 3 mm M.S. flat suitable for

20.00 fixing 2 Nos.of armoured cable with nuts and bolts. 2.00 Nos. 112.11

(c) for 140 mm dia. Pole

Providing & laying ISI marked Rigid PVC pipe having 6Kg / cm2 (Class-3) to

be erected at road crossing on or floor as directed for laying of cable. The

pipes as following size of dia & weight per 6 mtr.

(D) 75 mm Dia. (5.5 Kg/6RMT)

Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron

22.00 pipe with coupling and buch buried in specially prepared earth pit 1.00 Nos. 368.65

complete with necessary 8 SWG earth wire.

Supplying and erecting approved make Segment time switch suitable for

230V+10%16A. floating contacts with 24 hour dial having15/30 min.

segments with early manual override switching for on & off without

23.00 influencing the program sequence with quartz time switch With power 1.00 Nos. 2226.04

reserve, housed in fire proof thermoplastic enclosure & transparent cover

terminal covers erected as required wire necessary connection erected as

Solderless crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

24.00 switchgear terminals with brass/cadmium plated nut bolts in an approved 16.00 Nos. 20.20

Solderless crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

25.00 switchgear terminals with brass/cadmium plated nut bolts in an approved 4.00 Nos. 15.15

Consulting Civil Engineer City Engineer

DD (OPC) PVT LTD Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL CORPORATION,

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED FOR BHETASI AREA AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required

depth for laying any size of cable or locating the fault all over the run and back filling

the same and making the surface as normal ground. (B) If additional machinery like

hammer driller or JCB use [Add]

Supplying and erecting approved make Octagonal pole made from HR sheet steel. The

pole should be made as per IS. and shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with integral Junction box consist

of terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail

for MCB Mounting, stud type terminal and arrangement for cable termination to be

erected With Suitable foundation (Included) as per details given by manufacturer

considering site requirement.

(E) 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with

225mmX225mmX16mm base plate, 4-M20 Bolts and 600mm long with necessary G.I. J

Bolts .Approx Pole weight 67 kg

Providing and erecting Street Light pole bracket comprising main B Class MS pipe of

4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of

approx. 45cms.length and suitable for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets and having spread of 1.5.mtr. length

with 110 deg.with vertical plane & suitable welded stays, reducer and with check nuts

complete painted with one coat of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

4.00 driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below 30.00 Each. 1823.05

description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection.

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI

5.00 marked copper wires of following size to be erected as directed. 255.00 R.Mt. 46.46

(e) 1.50 Sq.mm 3 core round PVC sheathed

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench /

pipe of following size of cables

(C) 4 core 10 Sq. mm

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia.

7.00 galvanised iron pipe with coupling and buch buried in specially prepared earth pit 30.00 Each. 368.65

complete with necessary 8 SWG earth wire.

8.00 For using salt and charcoal / coke as required for pipe type earthing. 30.00 Each. 171.70

9.00 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 75.00 Kgs. 77.77

Supplying & erecting IP 55 grade following size section pillar fabricated from joint less

M.S. Sheet with angle iron legs made from jointless M.S. Angle with cable clamps to

be buried in ground to have appropriate erection to work uniform until erected with

cement concrete foundation and 45 cm high bricks work finishing with plaster etc.

hinged double door internally supported on both side, with internal and outside

looking arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of

Two Nos. one is welded and other with nut and bolt for erecting Bakelite sheet.

Painting the Section Pillar inside and out side with three tank powder coated paint.

section pillar roof should be without joint with water leakage proof & tested as per IP

55 test & followed by IS 2147 of

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with angle iron

legs 95 cm long made from 40 X 40 X 6 mm thick MS angle.

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL CORPORATION,

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED FOR BHETASI AREA AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Supplying and erecting HYLAM sheet on existing angle iron frame.for following

11.00 thickness 1.80 Sq.Mtr 1541.26

Providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with

Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected in existing

G.M.S. housing.

ICS=100% of ICU only Cat III

Supplying and erecting approved make Segment time switch suitable for

230V+10%16A. floating contacts with 24 hour dial having15/30 min. segments with

early manual override switching for on & off without influencing the program

sequence with quartz time switch With power reserve, housed in fire proof

thermoplastic enclosure & transparent cover terminal covers erected as required wire

necessary connection erected as directed.

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having

14.00 10KA breaking capacity & confirms to IS :8828 in existing box having following 6.00 Each. 638.32

capacity (B) 40 Amp. Cat.III

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including

excavation for the pole of size 60 x 60 x 120 cm. Deep in below ground level with

plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high upper ground level with necessary

curing and finishing in approved manner. ( for 7.5 & 8/8.5 mtr pole)

Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class-3) as per

IS:4984:1995 PE-80 to be erected at road crossing on or floor as directed for laying of

cable. The pipes as following size of dia & weight per 6 mtr.

(B) 50 mm inner Dia.

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

17.00 operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in 30.00 Each. 112.11

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner.

Consulting Civil Engineer City Engineer

DD (OPC) PVT LTD Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED FROM INDIA WATER TO DABHAN BHAGOLA AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth

for laying any size of cable or locating the fault all over the run and back filling the same

and making the surface as normal ground. (B) If additional machinery like hammer driller

or JCB use [Add]

Supplying and erecting approved make Octagonal pole made from HR sheet steel. The

pole should be made as per IS. and shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for cable termination to be

erected With Suitable foundation (Included) as per details given by manufacturer

considering site requirement.

(E) 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with

225mmX225mmX16mm base plate, 4-M20 Bolts and 600mm long with necessary G.I. J

Bolts .Approx Pole weight 67 kg

Supplying and erecting street light pole bracket comprising main B Class MS pipe of

cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5mm/80mm or require size pole top having sufficient

fastners for fixing the brackets and having suitable rise as per site condition as directed

3.00 and spread of 2 mtr.with suitable welded stiffener reducer and with lock nut complete 6.00 Each. 728.21

painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU

paint. Suitable for side entry fitting brackets of following nos of arms.

(A) Single Arm bracket 2 Mtr

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI

5.00 marked copper wires of following size to be erected as directed. 108.00 R.Mt. 46.46

(e) 1.50 Sq.mm 3 core round PVC sheathed

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench /

pipe of following size of cables

(C) 4 core 10 Sq. mm

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia.

7.00 galvanised iron pipe with coupling and buch buried in specially prepared earth pit 6.00 Each. 368.65

complete with necessary 8 SWG earth wire.

8.00 For using salt and charcoal / coke as required for pipe type earthing. 6.00 Each. 171.70

9.00 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 15.00 Kgs. 77.77

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED FROM INDIA WATER TO DABHAN BHAGOLA AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Supplying & erecting IP 55 grade following size section pillar fabricated from joint less

M.S. Sheet with angle iron legs made from jointless M.S. Angle with cable clamps to be

buried in ground to have appropriate erection to work uniform until erected with

cement concrete foundation and 45 cm high bricks work finishing with plaster etc.

hinged double door internally supported on both side, with internal and outside looking

arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one

is welded and other with nut and bolt for erecting Bakelite sheet. Painting the Section

Pillar inside and out side with three tank powder coated paint. section pillar roof

should be without joint with water leakage proof & tested as per IP 55 test & followed

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with angle iron

legs 95 cm long made from 40 X 40 X 6 mm thick MS angle.

Supplying and erecting HYLAM sheet on existing angle iron frame.for following thickness

Providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Fixed

thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Supplying and erecting approved make Segment time switch suitable for 230V+10%16A.

floating contacts with 24 hour dial having15/30 min. segments with early manual

override switching for on & off without influencing the program sequence with quartz

time switch With power reserve, housed in fire proof thermoplastic enclosure &

transparent cover terminal covers erected as required wire necessary connection

erected as directed.

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA

14.00 breaking capacity & confirms to IS :8828 in existing box having following capacity (B) 40 3.00 Each. 638.32

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including

excavation for the pole of size 60 x 60 x 120 cm. Deep in below ground level with plinth

of 45 cm x 45 cm(or 45 cm dia x 45 cm) high upper ground level with necessary curing

and finishing in approved manner. ( for 7.5 & 8/8.5 mtr pole)

Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class-3) as per

IS:4984:1995 PE-80 to be erected at road crossing on or floor as directed for laying of

cable. The pipes as following size of dia & weight per 6 mtr.

(B) 50 mm inner Dia.

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

17.00 operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in 12.00 Each. 112.11

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following

size evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

Consulting Civil Engineer City Engineer

DD (OPC) PVT LTD Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED FROM SENTENA CHAWKDI TO RANG UPVAN PARTY PLOT AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required

depth for laying any size of cable or locating the fault all over the run and back filling

the same and making the surface as normal ground. (B) If additional machinery like

hammer driller or JCB use [Add]

Supplying and erecting approved make Octagonal pole made from HR sheet steel. The

pole should be made as per IS. and shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with integral Junction box consist

of terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail

for MCB Mounting, stud type terminal and arrangement for cable termination to be

erected With Suitable foundation (Included) as per details given by manufacturer

considering site requirement.

(H) 9 Mtr. Long 70 mm Top X 155 mm bottom dia, 3 mm thickness with

260mmX260mmX16mm base plate, 4-M24 Bolts and 750mm long with necessary G.I. J

Bolts .Approx Pole weight 97 kg

Supplying and erecting street light pole bracket comprising main B Class MS pipe of

4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of

approx. 45cms.length and suitable for 76.5mm/80mm or require size pole top having

sufficient fastners for fixing the brackets and having suitable rise as per site condition

3.00 as directed and spread of 2 mtr.with suitable welded stiffener reducer and with lock 37.00 Each. 728.21

nut complete painted with one coat of Red oxide / PU base primer and two coats of

Aluminium / PU paint. Suitable for side entry fitting brackets of following nos of arms.

(A) Single Arm bracket 2 Mtr

Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

4.00 driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below 37.00 Each. 7875.98

description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection.

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI

5.00 marked copper wires of following size to be erected as directed. 407.00 R.Mt. 46.46

(e) 1.50 Sq.mm 3 core round PVC sheathed

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench /

pipe of following size of cables

(C) 4 core 10 Sq. mm

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia.

7.00 galvanised iron pipe with coupling and buch buried in specially prepared earth pit 37.00 Each. 368.65

complete with necessary 8 SWG earth wire.

8.00 For using salt and charcoal / coke as required for pipe type earthing. 37.00 Each. 171.70

9.00 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 92.50 Kgs. 77.77

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED FROM SENTENA CHAWKDI TO RANG UPVAN PARTY PLOT AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Supplying & erecting IP 55 grade following size section pillar fabricated from joint less

M.S. Sheet with angle iron legs made from jointless M.S. Angle with cable clamps to

be buried in ground to have appropriate erection to work uniform until erected with

cement concrete foundation and 45 cm high bricks work finishing with plaster etc.

hinged double door internally supported on both side, with internal and outside

looking arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of

Two Nos. one is welded and other with nut and bolt for erecting Bakelite sheet.

Painting the Section Pillar inside and out side with three tank powder coated paint.

section pillar roof should be without joint with water leakage proof & tested as per IP

55 test & followed by IS 2147 of

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with angle iron

legs 95 cm long made from 40 X 40 X 6 mm thick MS angle.

Supplying and erecting HYLAM sheet on existing angle iron frame.for following

11.00 thickness 1.80 Sq.Mtr 1541.26

Providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with

Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected in existing

G.M.S. housing.

ICS=100% of ICU only Cat III

Supplying and erecting approved make Segment time switch suitable for

230V+10%16A. floating contacts with 24 hour dial having15/30 min. segments with

early manual override switching for on & off without influencing the program

sequence with quartz time switch With power reserve, housed in fire proof

thermoplastic enclosure & transparent cover terminal covers erected as required wire

necessary connection erected as directed.

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having

14.00 10KA breaking capacity & confirms to IS :8828 in existing box having following 6.00 Each. 638.32

capacity (B) 40 Amp. Cat.III

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including

excavation for the pole of size 60 x 60 x 150 cm. Deep in below ground level with

15.00 plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high upper ground level with necessary 37.00 Each. 1652.36

curing and finishing in approved manner.

( for 9 & 10 mtr pole)

Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class-3) as per

IS:4984:1995 PE-80 to be erected at road crossing on or floor as directed for laying of

cable. The pipes as following size of dia & weight per 6 mtr.

(B) 50 mm inner Dia.

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

17.00 operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in 37.00 Each. 112.11

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner.

Consulting Civil Engineer City Engineer

DD (OPC) PVT LTD Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH FITTING & FIXTURES FROM KABRASTAN CHAWKDI TO MALARPURAI AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Supplying and erecting street light pole bracket comprising main B Class MS pipe of

4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of

approx. 45cms.length and suitable for 76.5mm/80mm or require size pole top having

sufficient fastners for fixing the brackets and having suitable rise as per site condition

1.00 as directed and spread of 2 mtr.with suitable welded stiffener reducer and with lock 15.00 Each. 728.21

nut complete painted with one coat of Red oxide / PU base primer and two coats of

Aluminium / PU paint. Suitable for side entry fitting brackets of following nos of arms.

(A) Single Arm bracket 2 Mtr

Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

2.00 driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below 15.00 Each. 7875.98

description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection.

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI

3.00 marked copper wires of following size to be erected as directed. 165.00 R.Mt. 46.46

(e) 1.50 Sq.mm 3 core round PVC sheathed

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia.

4.00 galvanised iron pipe with coupling and buch buried in specially prepared earth pit 15.00 Each. 368.65

complete with necessary 8 SWG earth wire.

5.00 For using salt and charcoal / coke as required for pipe type earthing. 15.00 Each. 171.70

6.00 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 37.50 Kgs. 77.77

Supplying & erecting IP 55 grade following size section pillar fabricated from joint less

M.S. Sheet with angle iron legs made from jointless M.S. Angle with cable clamps to

be buried in ground to have appropriate erection to work uniform until erected with

cement concrete foundation and 45 cm high bricks work finishing with plaster etc.

hinged double door internally supported on both side, with internal and outside

looking arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of

Two Nos. one is welded and other with nut and bolt for erecting Bakelite sheet.

Painting the Section Pillar inside and out side with three tank powder coated paint.

section pillar roof should be without joint with water leakage proof & tested as per IP

55 test & followed by IS 2147 of

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with angle iron

legs 95 cm long made from 40 X 40 X 6 mm thick MS angle.

Supplying and erecting HYLAM sheet on existing angle iron frame.for following

8.00 thickness 0.90 Sq.Mtr 1541.26

Providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with

Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected in existing

G.M.S. housing.

ICS=100% of ICU only Cat III

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH FITTING & FIXTURES FROM KABRASTAN CHAWKDI TO MALARPURAI AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Supplying and erecting approved make Segment time switch suitable for

230V+10%16A. floating contacts with 24 hour dial having15/30 min. segments with

early manual override switching for on & off without influencing the program

sequence with quartz time switch With power reserve, housed in fire proof

thermoplastic enclosure & transparent cover terminal covers erected as required wire

necessary connection erected as directed.

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having

11.00 10KA breaking capacity & confirms to IS :8828 in existing box having following 3.00 Each. 638.32

capacity (B) 40 Amp. Cat.III

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

12.00 operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in 15.00 Each. 112.11

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner.

Consulting Civil Engineer City Engineer

DD (OPC) PVT LTD Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL CORPORATION,

SUPPLYING AND ERECTION OF LED LIGHT FITTINGS WITH BRACKETS AT SANTRAM MARKET AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Providing and erecting Street Light pole bracket comprising main B Class MS pipe of

4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of

approx. 45cms.length and suitable for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets and having spread of 1.5.mtr. length

with 110 deg.with vertical plane & suitable welded stays, reducer and with check nuts

complete painted with one coat of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

2.00 driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below 6.00 Each. 5976.17

description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection.

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI

3.00 marked copper wires of following size to be erected as directed. 15.00 R.Mt. 46.46

(e) 1.50 Sq.mm 3 core round PVC sheathed

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

4.00 operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in 6.00 Each. 112.11

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner.

Consulting Civil Engineer City Engineer

DD (OPC) PVT LTD Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD

MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED FROM GLOBAL CINEMA TO PARAS CIRCLE AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Making trench in Hard Murrum / Tar Road of suitable width of

cm or required depth for laying any size of cable or locating the

1.00 fault all over the run and back filling the same and making the 600.00 R.Mt. 432.28

surface as normal ground. (B) If additional machinery like hammer

driller or JCB use [Add]

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

2.00 arrangement for cable termination to be erected With Suitable 15.00 Each. 15705.50

foundation (Included) as per details given by manufacturer

considering site requirement.

(H) 9 Mtr. Long 70 mm Top X 155 mm bottom dia, 3 mm thickness

with 260mmX260mmX16mm base plate, 4-M24 Bolts and 750mm

long with necessary G.I. J Bolts .Approx Pole weight 97 kg

Supplying and erecting street light pole bracket comprising main B

Class MS pipe of 4.2 cm/require outside dia. complete with suitable

B Class M.S. sleeve tubing of approx. 45cms.length and suitable for

76.5mm/80mm or require size pole top having sufficient fastners

for fixing the brackets and having suitable rise as per site condition

3.00 as directed and spread of 2 mtr.with suitable welded stiffener 15.00 Each. 728.21

reducer and with lock nut complete painted with one coat of Red

oxide / PU base primer and two coats of Aluminium / PU paint.

Suitable for side entry fitting brackets of following nos of arms.

(A) Single Arm bracket 2 Mtr

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

4.00 >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 15.00 Each. 7875.98

85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection.

Supplying and erecting Flexible PVC insulated multi strand multi

core 1.1 kv grade ISI marked copper wires of following size to be

erected as directed.

(e) 1.50 Sq.mm 3 core round PVC sheathed

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD

MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED FROM GLOBAL CINEMA TO PARAS CIRCLE AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

6.00 with necessary clamps or in existing trench / pipe of following size 765.00 R.Mt. 140.39

(C) 4 core 10 Sq. mm

Providing and erecting Pipe type earthing having 150 cms.long and

2.5 cms. dia. galvanised iron pipe with coupling and buch buried in

specially prepared earth pit complete with necessary 8 SWG earth

For using salt and charcoal / coke as required for pipe type

Providing and erecting HOT deep Galvanised iron strip wire 8 to

Supplying & erecting IP 55 grade following size section pillar

fabricated from joint less M.S. Sheet with angle iron legs made from

jointless M.S. Angle with cable clamps to be buried in ground to

have appropriate erection to work uniform until erected with

cement concrete foundation and 45 cm high bricks work finishing

with plaster etc. hinged double door internally supported on both

side, with internal and outside looking arrangement with look and

keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite sheet.

Painting the Section Pillar inside and out side with three tank

powder coated paint. section pillar roof should be without joint

with water leakage proof & tested as per IP 55 test & followed by IS

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS

Sheet with angle iron legs 95 cm long made from 40 X 40 X 6 mm

thick MS angle.

Supplying and erecting HYLAM sheet on existing angle iron

11.00 frame.for following thickness 0.90 Sq.Mtr 1541.26

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 35 KA. at 415 V.

having normal current rating 125A. with Fixed thermal & magnetic

12.00 release suitable to work on A.C.supply 50 c/s. with all internal 1.00 Each. 8055.76

connections, spreader tinned copper & complete erected in existing

16 G.M.S. housing.

ICS=100% of ICU only Cat III

Supplying and erecting approved make Segment time switch

suitable for 230V+10%16A. floating contacts with 24 hour dial

having15/30 min. segments with early manual override switching

for on & off without influencing the program sequence with quartz

time switch With power reserve, housed in fire proof thermoplastic

enclosure & transparent cover terminal covers erected as required

wire necessary connection erected as directed.

Providing & erecting 415V MCB Four Pole Switch for Lighting Load

(B curve) having 10KA breaking capacity & confirms to IS :8828 in

existing box having following capacity (B) 40 Amp. Cat.III

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD

MUNICIPAL CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED FROM GLOBAL CINEMA TO PARAS CIRCLE AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 60 x 60 x 150 cm.

Deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm

dia x 45 cm) high upper ground level with necessary curing and

finishing in approved manner.

( for 9 & 10 mtr pole)

Providing & laying approved make ISI marked HDPE 6Kg / cm2

(Class-3) as per IS:4984:1995 PE-80 to be erected at road crossing

16.00 on or floor as directed for laying of cable. The pipes as following 720.00 Rmt. 163.62

size of dia & weight per 6 mtr.

(B) 50 mm inner Dia.

providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

18.00 connected to switchgear terminals with brass/cadmium plated nut 120.00 Each. 13.13

bolts in an approved manner.

Consulting Civil Engineer City Engineer

DD (OPC) PVT LTD Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH FITTING & FIXTURES FROM FATAK TO UBHI NAHER AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Supplying and erecting street light pole bracket comprising main B Class MS pipe

of 4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of

approx. 45cms.length and suitable for 76.5mm/80mm or require size pole top

having sufficient fastners for fixing the brackets and having suitable rise as per site

1.00 condition as directed and spread of 2 mtr.with suitable welded stiffener reducer 20.00 Each. 626.20

and with lock nut complete painted with one coat of Red oxide / PU base primer

and two coats of Aluminium / PU paint. Suitable for side entry fitting brackets of

following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminium housing with

smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver

2.00 efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below 20.00 Each. 2201.80

description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade

3.00 ISI marked copper wires of following size to be erected as directed. 210.00 R.Mt. 46.46

(e) 1.50 Sq.mm 3 core round PVC sheathed

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia.

4.00 galvanised iron pipe with coupling and buch buried in specially prepared earth pit 20.00 Each. 368.65

complete with necessary 8 SWG earth wire.

5.00 For using salt and charcoal / coke as required for pipe type earthing. 20.00 Each. 171.70

6.00 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 50.00 Kgs. 77.77

Supplying & erecting IP 55 grade following size section pillar fabricated from joint

less M.S. Sheet with angle iron legs made from jointless M.S. Angle with cable

clamps to be buried in ground to have appropriate erection to work uniform until

erected with cement concrete foundation and 45 cm high bricks work finishing

with plaster etc. hinged double door internally supported on both side, with

internal and outside looking arrangement with look and keys in duplicate 35 x 35 x

7.00 5 mm M.S. Angle of Two Nos. one is welded and other with nut and bolt for 1.00 Each. 16691.26

erecting Bakelite sheet. Painting the Section Pillar inside and out side with three

tank powder coated paint. section pillar roof should be without joint with water

leakage proof & tested as per IP 55 test & followed by IS 2147 of

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with angle

iron legs 95 cm long made from 40 X 40 X 6 mm thick MS angle.

Supplying and erecting HYLAM sheet on existing angle iron frame.for following

8.00 thickness 0.90 Sq.Mtr 1541.26

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at 415 V. having normal current rating

125A. with Fixed thermal & magnetic release suitable to work on A.C.supply

c/s. with all internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH FITTING & FIXTURES FROM FATAK TO UBHI NAHER AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Supplying and erecting approved make Segment time switch suitable for

230V+10%16A. floating contacts with 24 hour dial having15/30 min. segments

with early manual override switching for on & off without influencing the program

sequence with quartz time switch With power reserve, housed in fire proof

thermoplastic enclosure & transparent cover terminal covers erected as required

wire necessary connection erected as directed.

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having

11.00 10KA breaking capacity & confirms to IS :8828 in existing box having following 3.00 Each. 638.32

capacity (B) 40 Amp. Cat.III

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

12.00 operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in 20.00 Each. 112.11

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

13.00 terminals with brass/cadmium plated nut bolts in an approved manner. 160.00 Each. 13.13

Consulting Civil Engineer City Engineer

DD (OPC) PVT LTD Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED FOR SUNDAR KUI AREA AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required

depth for laying any size of cable or locating the fault all over the run and back filling

the same and making the surface as normal ground. (B) If additional machinery like

hammer driller or JCB use [Add]

Providing and erecting Street Light pole bracket comprising main B Class MS pipe of

4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of

approx. 45cms.length and suitable for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets and having spread of 1.5.mtr.

length with 110 deg.with vertical plane & suitable welded stays, reducer and with

check nuts complete painted with one coat of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

3.00 driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below 18.00 Each. 1823.05

description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection.

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI

4.00 marked copper wires of following size to be erected as directed. 153.00 R.Mt. 46.46

(e) 1.50 Sq.mm 3 core round PVC sheathed

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables

(C) 4 core 10 Sq. mm

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia.

6.00 galvanised iron pipe with coupling and buch buried in specially prepared earth pit 18.00 Each. 368.65

complete with necessary 8 SWG earth wire.

7.00 For using salt and charcoal / coke as required for pipe type earthing. 18.00 Each. 171.70

8.00 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 45.00 Kgs. 77.77

Supplying & erecting IP 55 grade following size section pillar fabricated from joint less

M.S. Sheet with angle iron legs made from jointless M.S. Angle with cable clamps to

be buried in ground to have appropriate erection to work uniform until erected with

cement concrete foundation and 45 cm high bricks work finishing with plaster etc.

hinged double door internally supported on both side, with internal and outside

looking arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of

9.00 Two Nos. one is welded and other with nut and bolt for erecting Bakelite sheet. 2.00 Each. 16691.26

Painting the Section Pillar inside and out side with three tank powder coated paint.

section pillar roof should be without joint with water leakage proof & tested as per IP

55 test & followed by IS 2147 of

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with angle

iron legs 95 cm long made from 40 X 40 X 6 mm thick MS angle.

Supplying and erecting HYLAM sheet on existing angle iron frame.for following

10.00 thickness 1.80 Sq.Mtr 1541.26

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED FOR SUNDAR KUI AREA AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A.

with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected in existing

G.M.S. housing.

ICS=100% of ICU only Cat III

Supplying and erecting approved make Segment time switch suitable for

230V+10%16A. floating contacts with 24 hour dial having15/30 min. segments with

early manual override switching for on & off without influencing the program

sequence with quartz time switch With power reserve, housed in fire proof

thermoplastic enclosure & transparent cover terminal covers erected as required

wire necessary connection erected as directed.

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having

13.00 10KA breaking capacity & confirms to IS :8828 in existing box having following 6.00 Each. 638.32

capacity (B) 40 Amp. Cat.III

Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class-3) as per

IS:4984:1995 PE-80 to be erected at road crossing on or floor as directed for laying

of cable. The pipes as following size of dia & weight per 6 mtr.

(B) 50 mm inner Dia.

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

15.00 operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in 18.00 Each. 112.11

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner.

Consulting Civil Engineer City Engineer

DD (OPC) PVT LTD Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED ON SUNDAR KUI FATAK TO ZALAK NAHER AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required

depth for laying any size of cable or locating the fault all over the run and back

filling the same and making the surface as normal ground. (B) If additional

machinery like hammer driller or JCB use [Add]

Supplying and erecting approved make Octagonal pole made from HR sheet steel.

The pole should be made as per IS. and shall be coated with hot dip galvanizing as

per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement

2.00 for cable termination to be erected With Suitable foundation (Included) as per 20.00 Each. 11411.99

details given by manufacturer considering site requirement.

(E) 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with

225mmX225mmX16mm base plate, 4-M20 Bolts and 600mm long with necessary

G.I. J Bolts .Approx Pole weight 67 kg

Providing and erecting Street Light pole bracket comprising main B Class MS pipe

of 4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of

approx. 45cms.length and suitable for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets and having spread of 1.5.mtr.

3.00 length with 110 deg.with vertical plane & suitable welded stays, reducer and with 20.00 Each. 626.20

check nuts complete painted with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminium housing with

smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver

4.00 efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below 20.00 Each. 2201.80

description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade

5.00 ISI marked copper wires of following size to be erected as directed. 170.00 R.Mt. 46.46

(e) 1.50 Sq.mm 3 core round PVC sheathed

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables

(C) 4 core 10 Sq. mm

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia.

7.00 galvanised iron pipe with coupling and buch buried in specially prepared earth pit 20.00 Each. 368.65

complete with necessary 8 SWG earth wire.

8.00 For using salt and charcoal / coke as required for pipe type earthing. 20.00 Each. 171.70

9.00 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 50.00 Kgs. 77.77

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED ON SUNDAR KUI FATAK TO ZALAK NAHER AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Supplying & erecting IP 55 grade following size section pillar fabricated from joint

less M.S. Sheet with angle iron legs made from jointless M.S. Angle with cable

clamps to be buried in ground to have appropriate erection to work uniform until

erected with cement concrete foundation and 45 cm high bricks work finishing

with plaster etc. hinged double door internally supported on both side, with

internal and outside looking arrangement with look and keys in duplicate 35 x 35 x

10.00 5 mm M.S. Angle of Two Nos. one is welded and other with nut and bolt for 1.00 Each. 16691.26

erecting Bakelite sheet. Painting the Section Pillar inside and out side with three

tank powder coated paint. section pillar roof should be without joint with water

leakage proof & tested as per IP 55 test & followed by IS 2147 of

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with angle

iron legs 95 cm long made from 40 X 40 X 6 mm thick MS angle.

Supplying and erecting HYLAM sheet on existing angle iron frame.for following

11.00 thickness 0.90 Sq.Mtr 1541.26

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at 415 V. having normal current rating

125A. with Fixed thermal & magnetic release suitable to work on A.C.supply

c/s. with all internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Supplying and erecting approved make Segment time switch suitable for

230V+10%16A. floating contacts with 24 hour dial having15/30 min. segments

with early manual override switching for on & off without influencing the

program sequence with quartz time switch With power reserve, housed in fire

proof thermoplastic enclosure & transparent cover terminal covers erected as

required wire necessary connection erected as directed.

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve)

14.00 having 10KA breaking capacity & confirms to IS :8828 in existing box having 3.00 Each. 638.32

following capacity (B) 40 Amp. Cat.III

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including

excavation for the pole of size 60 x 60 x 120 cm. Deep in below ground level with

15.00 plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high upper ground level with 20.00 Each. 1292.80

necessary curing and finishing in approved manner. ( for 7.5 & 8/8.5 mtr pole)

Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class-3) as per

IS:4984:1995 PE-80 to be erected at road crossing on or floor as directed for

laying of cable. The pipes as following size of dia & weight per 6 mtr.

(B) 50 mm inner Dia.

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

17.00 operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in 20.00 Each. 112.11

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

18.00 terminals with brass/cadmium plated nut bolts in an approved manner. 160.00 Each. 13.13

Consulting Civil Engineer City Engineer

DD (OPC) PVT LTD Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED FOR CIVIL NAHER BADSHAH FARM TO ARMAN PARK AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required

depth for laying any size of cable or locating the fault all over the run and back

filling the same and making the surface as normal ground. (B) If additional

machinery like hammer driller or JCB use [Add]

Providing and erecting Street Light pole bracket comprising main B Class MS pipe of

4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of

approx. 45cms.length and suitable for 76.5 mm /80mm / required size of pole top

having sufficient fasteners for fixing the brackets and having spread of 1.5.mtr.

length with 110 deg.with vertical plane & suitable welded stays, reducer and with

check nuts complete painted with one coat of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

3.00 [B] Double Arm Bracket 1.5 Mtr 50.00 Each. 916.07

4.00 [C] Triple Arm Bracket 1.5 Mtr 25.00 Each. 1216.04

Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

5.00 driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below 200.00 Each. 4997.48

description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection.

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade

6.00 ISI marked copper wires of following size to be erected as directed. 650.00 R.Mt. 46.46

(e) 1.50 Sq.mm 3 core round PVC sheathed

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables

(C) 4 core 10 Sq. mm

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia.

8.00 galvanised iron pipe with coupling and buch buried in specially prepared earth pit 25.00 Each. 368.65

complete with necessary 8 SWG earth wire.

9.00 For using salt and charcoal / coke as required for pipe type earthing. 25.00 Each. 171.70

10.00 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 62.50 Kgs. 77.77

Supplying & erecting IP 55 grade following size section pillar fabricated from joint

less M.S. Sheet with angle iron legs made from jointless M.S. Angle with cable

clamps to be buried in ground to have appropriate erection to work uniform until

erected with cement concrete foundation and 45 cm high bricks work finishing with

plaster etc. hinged double door internally supported on both side, with internal and

outside looking arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S.

11.00 Angle of Two Nos. one is welded and other with nut and bolt for erecting Bakelite 2.00 Each. 16691.26

sheet. Painting the Section Pillar inside and out side with three tank powder coated

paint. section pillar roof should be without joint with water leakage proof & tested

as per IP 55 test & followed by IS 2147 of

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with angle

iron legs 95 cm long made from 40 X 40 X 6 mm thick MS angle.

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED FOR CIVIL NAHER BADSHAH FARM TO ARMAN PARK AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Supplying and erecting HYLAM sheet on existing angle iron frame.for following

12.00 thickness 1.80 Sq.Mtr 1541.26

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A.

with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with

all internal connections, spreader tinned copper & complete erected in existing

G.M.S. housing.

ICS=100% of ICU only Cat III

Supplying and erecting approved make Segment time switch suitable for

230V+10%16A. floating contacts with 24 hour dial having15/30 min. segments with

early manual override switching for on & off without influencing the program

sequence with quartz time switch With power reserve, housed in fire proof

thermoplastic enclosure & transparent cover terminal covers erected as required

wire necessary connection erected as directed.

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having

15.00 10KA breaking capacity & confirms to IS :8828 in existing box having following 6.00 Each. 638.32

capacity (B) 40 Amp. Cat.III

Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class-3) as per

IS:4984:1995 PE-80 to be erected at road crossing on or floor as directed for laying

of cable. The pipes as following size of dia & weight per 6 mtr.

(B) 50 mm inner Dia.

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

17.00 operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in 25.00 Each. 112.11

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner.

Consulting Civil Engineer City Engineer

DD (OPC) PVT LTD Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED ON PIJ ROAD FROM PRATISHTHA BUNGLOW TO MAHESHWARI VADI TO KENAL CROSS ROAD

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying

any size of cable or locating the fault all over the run and back filling the same and making the

surface as normal ground. (B) If additional machinery like hammer driller or JCB use [Add]

Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should

be made as per IS. and shall be coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With Suitable foundation (Included) as per details

given by manufacturer considering site requirement.

(E) 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with 225mmX225mmX16mm

base plate, 4-M20 Bolts and 600mm long with necessary G.I. J Bolts .Approx Pole weight 67 kg

Providing and erecting Street Light pole bracket comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S. sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm /80mm / required size of pole top having sufficient fasteners for fixing the brackets and

having spread of 1.5.mtr. length with 110 deg.with vertical plane & suitable welded stays, reducer

and with check nuts complete painted with one coat of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of

3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminium housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required

4.00 LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of 20.00 Each. 2201.80

LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with

over-voltage protection.

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper

5.00 wires of following size to be erected as directed. 170.00 R.Mt. 46.46

(e) 1.50 Sq.mm 3 core round PVC sheathed

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of

(C) 4 core 10 Sq. mm

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe

7.00 with coupling and buch buried in specially prepared earth pit complete with necessary 8 SWG earth 20.00 Each. 368.65

8.00 For using salt and charcoal / coke as required for pipe type earthing. 20.00 Each. 171.70

9.00 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 50.00 Kgs. 77.77

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED ON PIJ ROAD FROM PRATISHTHA BUNGLOW TO MAHESHWARI VADI TO KENAL CROSS ROAD

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Supplying & erecting IP 55 grade following size section pillar fabricated from joint less M.S. Sheet

with angle iron legs made from jointless M.S. Angle with cable clamps to be buried in ground to

have appropriate erection to work uniform until erected with cement concrete foundation and

cm high bricks work finishing with plaster etc. hinged double door internally supported on both

side, with internal and outside looking arrangement with look and keys in duplicate 35 x 35 x 5 mm

10.00 M.S. Angle of Two Nos. one is welded and other with nut and bolt for erecting Bakelite sheet. 2.00 Each. 16691.26

Painting the Section Pillar inside and out side with three tank powder coated paint. section pillar

roof should be without joint with water leakage proof & tested as per IP 55 test & followed by IS

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with angle iron legs 95 cm

long made from 40 X 40 X 6 mm thick MS angle.

Supplying and erecting HYLAM sheet on existing angle iron frame.for following thickness

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Fixed thermal & magnetic

12.00 release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper 2.00 Each. 8055.76

& complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Supplying and erecting approved make Segment time switch suitable for 230V+10%16A. floating

contacts with 24 hour dial having15/30 min. segments with early manual override switching for on

13.00 & off without influencing the program sequence with quartz time switch With power reserve, 2.00 Each. 2226.04

housed in fire proof thermoplastic enclosure & transparent cover terminal covers erected as

required wire necessary connection erected as directed.

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking

14.00 capacity & confirms to IS :8828 in existing box having following capacity (B) 40 Amp. Cat.III 6.00 Each. 638.32

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the

pole of size 60 x 60 x 120 cm. Deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm dia

x 45 cm) high upper ground level with necessary curing and finishing in approved manner. ( for

& 8/8.5 mtr pole)

Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class-3) as per IS:4984:1995 PE-

80 to be erected at road crossing on or floor as directed for laying of cable. The pipes as following

size of dia & weight per 6 mtr.

(B) 50 mm inner Dia.

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V

17.00 A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 20.00 Each. 112.11

8828/1996 with ISI Mark Cat.III

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated

nut bolts in an approved manner.

Consulting Civil Engineer City Engineer

DD (OPC) PVT LTD Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED FROM CHAKLASI BHAGOL TO NAHER AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for

laying any size of cable or locating the fault all over the run and back filling the same and

making the surface as normal ground. (B) If additional machinery like hammer driller or JCB

Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole

should be made as per IS. and shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for cable termination to be erected With

Suitable foundation (Included) as per details given by manufacturer considering site

(H) 9 Mtr. Long 70 mm Top X 155 mm bottom dia, 3 mm thickness with

260mmX260mmX16mm base plate, 4-M24 Bolts and 750mm long with necessary G.I. J Bolts

.Approx Pole weight 97 kg

Providing and erecting Street Light pole bracket comprising main B Class MS pipe of

cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5 mm /80mm / required size of pole top having sufficient

fasteners for fixing the brackets and having spread of 1.5.mtr. length with 110 deg.with

vertical plane & suitable welded stays, reducer and with check nuts complete painted with

one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79

& LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the ranges

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI

5.00 marked copper wires of following size to be erected as directed. 1050.00 R.Mt. 46.46

(e) 1.50 Sq.mm 3 core round PVC sheathed

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe

of following size of cables

(C) 4 core 10 Sq. mm

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised

7.00 iron pipe with coupling and buch buried in specially prepared earth pit complete with 100.00 Each. 368.65

necessary 8 SWG earth wire.

8.00 For using salt and charcoal / coke as required for pipe type earthing. 100.00 Each. 171.70

9.00 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 250.00 Kgs. 77.77

NADIAD MUNICIPAL CORPORATION - NADIAD

BID DOCUMENTS FOR SUPPLYING AND ERECTION OF LED LIGHT WITH POLE, HIGH MAST AT DIFFERENT PLACES AT NADIAD FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF LED LIGHT WITH POLE AND WITH LED FROM CHAKLASI BHAGOL TO NAHER AT NADIAD.

ITEM NO Quantity UNIT RATE AMOUNT Rs.

Supplying & erecting IP 55 grade following size section pillar fabricated from joint less M.S.

Sheet with angle iron legs made from jointless M.S. Angle with cable clamps to be buried in

ground to have appropriate erection to work uniform until erected with cement concrete

foundation and 45 cm high bricks work finishing with plaster etc. hinged double door

internally supported on both side, with internal and outside looking arrangement with look

and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and other with

nut and bolt for erecting Bakelite sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should be without joint with water

leakage proof & tested as per IP 55 test & followed by IS 2147 of

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with angle iron legs

95 cm long made from 40 X 40 X 6 mm thick MS angle.

Supplying and erecting HYLAM sheet on existing angle iron frame.for following thickness

Providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Fixed

12.00 thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal 4.00 Each. 8055.76

connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Supplying and erecting approved make Segment time switch suitable for 230V+10%16A.

floating contacts with 24 hour dial having15/30 min. segments with early manual override

switching for on & off without influencing the program sequence with quartz time switch

With power reserve, housed in fire proof thermoplastic enclosure & transparent cover

terminal covers erected as required wire necessary connection erected as directed.

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA

14.00 breaking capacity & confirms to IS :8828 in existing box having following capacity (B) 40 12.00 Each. 638.32

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation

for the pole of size 60 x 60 x 150 cm. Deep in below ground level with plinth of 45 cm x

15.00 cm(or 45 cm dia x 45 cm) high upper ground level with necessary curing and finishing in 100.00 Each. 1652.36

approved manner.

( for 9 & 10 mtr pole)

Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class-3) as per

IS:4984:1995 PE-80 to be erected at road crossing on or floor as directed for laying of

cable. The pipes as following size of dia & weight per 6 mtr.

(B) 50 mm inner Dia.

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate

17.00 on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. 100.00 Each. 112.11

confirming to IS 8828/1996 with ISI Mark Cat.III

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following

size evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

Consulting Civil Engineer City Engineer

DD (OPC) PVT LTD Nadiad Municipal Corporation

Ahmedabad Nadiad