Annual Plan-1040/24-Electrification work of Health center, Chelavur-General Electrical Work-General Electrical work at Health center, Chelavur RETENDER

Amount

Electrification work

1.10.2:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B

1.10.3:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.55.1:Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A

1.55.2:Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B

1.55.3:Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C

90.2.1.4:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. - Short point

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.16:Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm

1.17.11:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm

90.16.1.1:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG)

90.4.1:Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.

OD133150/2023-2024:Supply, installation , testing and commissioning of 1200 mm sweep-ceiling fan complete with service value minimum 4.0 (cub meter/minute/watt) Air delivery minimum 200 (cubic meter/minute) , 300 mm down road ,2 number canopies ,shackle kit , copper winding, 3 Number blades and all remaining accessories including safety pin , nut bolt washerswashers suitable for 230 V/240 V single phase AC supply etc. complete as required .(Philips ecolink vayu high speed or eqivalent)

OD133156/2023-2024:Supply, installation testing and commissioning of up down LED light 2x 3w led Warm white K shaped with IP 65/66 protection Out door use, waterproof (Make DEWTON OUTDOOR Model DOL 101 or equivalent)

OD133167/2023-2024:Supply and fixing of thermoplastic polycarbonate cable junction box IP66/67 in accordance with IEC60529 environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid & anti corrosive, shockproof with 5 pole terminals suitable to terminate upto 4 sqmm. Dimensions: 104 x 104 x 70 mm ₹ 407Get Latest Price Material Polypropylene IP Rating IP66 Brand Hensel Dimensions 104 x 104 x 70 mm Model Name/Number DK 0404 G Rated Insulation Voltage 690 V AC Rated Current 32 A

OD135770/2023-2024:Supply and fixing 7 W LED Bulk Head with IP 65 protection and IK 08 impact resistance aluminium die-cast housing poly carbonate optic diffuser suitable for wall mounting application including giving connection as required (make philips model WT 140 W LED 7S CW PSU S 1 PC-9505) or equivalent make .

1.33:Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

OD135950/2023-2024:Supply, installation, testing and commissioning of garden pole light /bollard light . Body colour - black , input voltage 220-240V, CRI ≥80, supply source E 27, IP 65/66 (bulb excluded) body- material Aluminium, PC ( Philips MODEL Glide 58176 or equivalent)

OD138089/2023-2024:Supply installation testing and commissioning of hanging pendant light with all accessories, but bulb excluded . Bulb Base E-27 Colour Matte Black & Gold Material Aluminium Voltage 220 V, 50 Hz (Brand Philips Model Hemis or equivalent)

OD138090/2023-2024:LED filament bulb 9 to 20 W as required (Philips, Wipro, Osram or equivalent)

OD138207/2023-2024:supply installation testing and commissioning of Flood light Color Warm White, Wattage 10 W, IP Rating IP 65, approx. Dimension 12.4 x 11.5 x 3.6 cm with suitable mounting arms and required nuts and bolts ( Make Dewton Product Code or any other equivalent)

90.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

RAMAKRISHNAN A P

Bidder Name

NISARI SOUNDS AND ELECTRICALS

RAMAKRISHNAN A P