Bid Documents for Water Body Rejuvenation project of Govindpura Pond including Five Year Operation and Maintenance Period (SWAP-II) under Amrut 2.0 Scheme for Padra Nagarpalika at Padra, Dist. Vadodara.Second Attempt

Sr No. Description Estimated Cost

SCHEDULE-B1 DEWATERING,DESILTING & LAND CLEARING

SCHEDULE-2 EARTH FILLING AT GOVINDPURA

SCHEDULE-3 CONSTRUCTION WORK OF TOE WALL

SCHEDULE-4 CONSTRUCTION WORK OF INLET BOX DRAIN

SCHEDULE-5 CONSTRUCTION WORK OF COMPOUND WALL,

SCHEDULE-6 CONSTRUCTION WORK OF PATHWAY & RAILING

SCHEDULE-7 CONSTRUCTION WORK OF SECURITY CABIN

SCHEDULE-8 CONSTRUCTION WORK OF DRINKING WATER FACILITY

SCHEDULE-9 PROVIDING AND LAYING OF 2000 MM DIA R.C.C. NP4 PIPE DRAIN

SCHEDULE-10 PROVIDING,SUPPLYING AND LAYING OF 600 MM DIA RCC NP-3 PIPE

SCHEDULE-11 HORTICULTURE SERVICES AT GOVINDPURA

SCHEDULE-12 CONSTRUCTION WORK OF PUMP ROOM

SCHEDULE-13 DRILLING OF TUBE WELL 250 MM DIA BY D. R. METHOD & 300 MM DIA

PIPE WITH 27.5 H. P. PUMP

SCHEDULE-14 SUPPLYING, ERECTING & COMMISSIONING OF STREET LIGHT WITH LED

SCHEDULE-15 DEVLOPEMENT OF CHILDREN PLAY AREA AND PLAYING EQUIPMENT

SCHEDULE-16 CONSTRUCTION WORK OF SHOPS.

SCHEDULE-17 O & M COST FOR 5 YEARS INCLUDING MATERIAL AND MANPOWER

I/We am/are willing to carry out the work at… % above/below percent (Should be written in figures and

words) of the estimated rate mentioned above. Amount of my/our tender works out as under Estimated

amount put to tender Estimated amount put to tender Deduct………% below Add………% Above

In words In words………………….

The 18% GST will be Paid Separately for the tender rate shown in the Schedule B.

The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer‐In‐ Charge for which no extra payment shall be made.

Signature of Contractor Signature of Chief Officer

PADRA NAGARPALIKA PADRA

DEWATERING,DESILTING & LAND CLEARING OF GOVINDPURA POND AT PADRA

Qty. Description Unit Amount

1 9262.00 Dewatering by pumping set of required

HP/Hr capacity including temporary platform

carting pumping at site and fixing the

same in position including all accessories,

and fuel and labour etc. complete.

2 6100.00 Excavation for foundation in sand,gravel,

Cmt clay soft soils and murrum etc.including

shoring, strutting dewatering as

necessary and disposing of the excavated

stuff as direcd.(A) Depth upto 3.0 M. and

lead upto 100m for 10 Cum.

3 0.90 Clearing and grubbing road land including

Heca. uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth up

to 300 mm removal of stumps of trees

cut earlier and disposal of unserviceable

materials(A) By manual means in area of

SBD SECTION-7 BILL OF QUANTITIES-550

PADRA NAGARPALIKA PADRA

EARTH FILLING AT GOVINDPURA POND AT PADRA.

Qty. Description Unit Amount

1 6407.81 Filling in Foundation & plinth with

Cmt murrum of selected soil layers of 20 cm.

thickness including watering, ramming,

consolidating dressing etc complete.

2 12600.00 Earth Work Embakement including

Cmt. breaking clods, dressing with all lead and

lift (Including watering and Consolidation)

From Borrow area 0.5 Km lead &

Watering of earth work as directed.

SBD SECTION-7 BILL OF QUANTITIES-551

PADRA NAGARPALIKA PADRA

CONSTRUCTION WORK OF TOE WALL AT GOVINDPURA POND AT PADRA

Qty. Description Unit Amount

1 864.00 Excavation for foundation in Loose or

Cmt. soft soil 1.5 mt. Depth including sorting

out and stacking of useful materials and

depositing of the excavated stuff for all

the leads and lift etc. complete as directed

by Engineer-in-charge.

2 173.00 Excavation for foundation in Loose or

Cmt. soft soil from depth 1:5 mt. to 3.0 mt.

including sorting out and stacking of

useful materials and depositing of the

excavated stuff for all the leads and lift etc.

complete as directed by Engineer-in-charge.

3 272.00 Filling with available excavated earth in

Cmt. between walls and plinth in layer not

exceeding 20cm. In depth including

consolidating ramming, watering in true

line and level etc. complete as directed by

Engineer-in-charge.

4 86.50 Collecting, carting and Stacking Under size

Cmt. metal (40 mm to 63 mm. Size) at site of

work in difrent stacks over through

required including cost of filling measure

boxes of standard sizes, including cost of all

taxes, octroi loading, unloading charges of

vehicles, shifting charges of excess material

unloaded at one place to other place to be

used for the same site and stacking with all

lead and carting etc, complete.

SBD SECTION-7 BILL OF QUANTITIES-552

5 30.50 Collecting, carting and Stacking Stone

Cmt. Dust/bindage of very fine size for road at

site of work in all different stackes over

through out the length of road or where

ever required including cost of all taxes,

octroi, loading unloading any charges of

excess materials, loading at one place to

other place to be used for the same site

and stacking with all lead and lift and

carting etc. complete.

6 86.50 Spreading the stone aggregate for rolling

Cmt. and W.B.M. including filling the interstices

to required camber and gradient (excluding

spreading of Blindage)(ii) 40mm to 63mm

size aggreagates (H.B.)

7 30.50 Spreading blindage or road crust filling the

Cmt. gaps in metal and leveling to camber and

gradient as directed.(i) Stone Dust

8 108.00 Providing and laying cement concrete 1:3:6

Cmt. (1 Cement : 3 Course sand : 6 Broken stone

aggregates 40 mm nominal size) and curing

complete excluding cost of form work in (A)

Foundation and Plinth.

9 540.00 Providing Toe wall for dry stone pitching in

Cmt. uncourased rubble masonary with had

stone of approved quality in cement.

Mortar 1:5 including curing etc. complete.

(more than 10 ton)

10 35.00 Providing and laying controlled cement

Cmt. concrete M-200 and curing complete

including the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in Beams having

any cross section area for all floors.

11 54.00 Providing and laying controlled cement

Cmt concrete M-200 and curing complete

including the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in coping.

SBD SECTION-7 BILL OF QUANTITIES-553

12 8050.00 Providing TMT Bar FE 500D reinforcement

Kgs. for R.C.C. work including bending, binding

and placing in position complete upto floor

13 192.00 Filling in Foundation & plinth with sand

Cmt under floors including watering, ramming,

consolidating and dressing etc. complete.

14 192.00 Screened gravel 12mm size

SBD SECTION-7 BILL OF QUANTITIES-554

PADRA NAGARPALIKA PADRA

CONSTRUCTION WORK OF INLET BOX DRAIN AT GOVINDPURA POND , PADRA

No. Qty. Description Unit Amount

1 795.00 Excavation for foundation in Loose or soft

Cmt. soil 1.5 mt. Depth including sorting out and

stacking of useful materials and depositing

of the excavated stuff for all the leads and

lift etc. complete as directed by Engineer-in-

a)0.00 to 1.50 M. depth 120.01 Cmt.

2 795.00 Excavation for foundation from depth 1:5

Cmt. mt. to 3.0 mt. Depth including sorting out

and stacking of useful materials and

depositing of the excavated stuff up to

meter lead. (a) Loose or soft soil.

3 961.50 Filing available excavated earth (excluding

Cmt. rock) in trenches plinth sides of foundations

etc. in layers not exceeding 20cm. In depth

consolidating each deposited layer by

remming and watering.

4 175.00 Collecting, carting and Stacking Under size

Cmt. metal (40 mm to 63 mm. Size) at site of

work in difrent stacks over through required

including cost of filling measure boxes of

standard sizes, including cost of all taxes,

octroi loading, unloading charges of

vehicles, shifting charges of excess material

unloaded at one place to other place to be

used for the same site and stacking with all

lead and carting etc, complete.

SBD SECTION-7 BILL OF QUANTITIES-555

5 44.00 Collecting, carting and Stacking Stone

Cmt. Dust/bindage of very fine size for road at

site of work in all different stackes over

through out the length of road or where

ever required including cost of all taxes,

octroi, loading unloading any charges of

excess materials, loading at one place to

other place to be used for the same site and

stacking with all lead and lift and carting etc.

6 175.00 Spreading the ston aggregate for rolling and

Cmt. W.B.M. including filling the interstices to

required camber and gradiant (excluding

sprading of Blindage )(ii) 40 mm to 63 mm

size aggreagates.(H.B.)

7 44.00 Spreading blindage or road crust filling the

Cmt. gaps in metal and leveling to camber and

gradiant as directed (ii)

8 79.50 Providing and laying cement concrete

Cmt. 1:4:8(1 Cement, 4 coarse sand, 8 graded

stone aggregates 20mm nominal size) and

curing complete excluding cost of formwork

in Foundation and Plinth 2747.21 Cmt.

9 Providing and laying controlled cement

concrete M-200 and curing complete

excluding the cost of formwork and

reinforcement of reinforced concrete work

a. 180.16 -- do -- for R.C.C Base Slab 3942.22 Cmt.

b. 150.00 -- do -- for R.C.C Vertical Wall 4485.51 Cmt.

c. 141.00 -- do -- for R.C.C Top Slab 4460.86 Cmt.

10 58900.00 Providing TMT Bar FE 500D reinforcement

Kgs. for R.C.C. work including bending, binding

and placing in position complete upto floor

two level 77.29 Kg.

SBD SECTION-7 BILL OF QUANTITIES-556

11 500.00 Providing and applying 10 mm thick smooth

Smt. cement plaster in single coat of fair side of

brick/concrete walls for interior plastering

for G.F. upto floor two level in C.M.(1:3) (1

cement, 3 sand) including finishing even and

smooth with floating coat of neat cement

slurry including scaffolding curing etc.

complete as directed by Engineer-in-charge.

12 432.00 Providing and fixing M. S. grill cover with M.

Kgs. S flats at required spacing and frames

alround, Square or round bars fixed with

round headed bolts and nuts or by screws,

including oil painting with one coat of

primer of approved quality and brand and

two coats of synthetic enamel oil paint etc.

complete as directed by Engineer-in-charge.

13 Providing Formwork of ordinary timber

plankings so as to give a rough finished

including centering, shuttering, struting and

propping etc. height of propping and

centering below supporting floor to ceiling

not exceeding 4.0 Mt. and removal of the

same for cast in situ reinforced concrete and

plain concrete work.

a. 1500.00 For Vertical Wall 238.06 Smt.

b. 310.00 For Slab 260.88 Smt.

14 60.00 Providing and laying rubble stone pitching

Smt. 22.50cm thick including preparing the

surface and filling interstices with sand

including pointing on pitching in C.M. 1:3

including curing, cost of all materials and

labor as directed on site etc.

SBD SECTION-7 BILL OF QUANTITIES-557

15 2.00 Filling in Foundation & plinth with sand

Cmt under floors including watering, ramming,

consolidating and dressing etc. complete.

16 2.00 Screened gravel 12mm size

SBD SECTION-7 BILL OF QUANTITIES-558

PADRA NAGARPALIKA PADRA

CONSTRUCTION WORK OF COMPOUND WALL, AT GOVINDPURA POND AT PADRA

Item Qty. Description Total Unit Amount

1 1452.00 Excavation for foundation up to 1:5 mt.

Cmt. Depth including sorting out and stacking

of useful materials and depositing of

the excavated stuff up to 50 meter lead.

2 253.00 Excavation for foundation from depth 1:5

Cmt. mt. to 3.0 mt. Depth including sorting out

and stacking of useful materials and

depositing of the excavated stuff up to

meter lead. (a) Loose or soft soil. 133.05 Cmt.

3 1123.00 Filing available excavated earth (excluding

Cmt. rock) in trenches plinth sides of foundations

etc. in layers not exceeding 20cm. In depth

consolidating each deposited layer by

remming and watering. 133.65 Cmt.

4 169.00 Providing and laying cement concrete 1:4:8

Cmt. (1-Cement : 4-fine sand : 8-graded birck

aggregates 40 mm nominal size) and curing

complete excluding cost of form work in (a)

Foundation and plinth. 2726.96 Cmt.

5 263.50 Providing and Laying controlled cement

Cmt. concrete M-250 and curing complete,

including the cost of formwork but

excluding the cost of reinforcement for

reinforced concrete work in Column

footings. 4779.32 Cmt.

6 56.00 Providing and laying controlled cement

Cmt. concrete M-250 and curing complete

including the cost of formwork But

Excluding the cost of reinforcement for

reinforced concrete work in Column upto

Plinth Level having any cross section area. 6893.25 Cmt.

SBD SECTION-7 BILL OF QUANTITIES-559

7 70.00 Providing and Laying controlled cement

Cmt. concrete M-250 and curing complete,

including the cost of formwork but

excluding the cost of reinforcement for

reinforced concrete work in Columns having

any cross section area upto floor two level.

8 93.50 Providing and laying controlled cement

Cmt. concrete M-250 and curing complete

including the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in Ground Beam

having any cross section area. 5875.17 Cmt.

9 18.00 Providing and laying controlled cement

Cmt. concrete M-200 and curing complete

including the cost of formwork and

excluding the cost of reinforcement of

reinforced concrete work in

-- do -- for Coping

51240.00 Providing TMT Bar FE 500D reinforcement

Kgs. for R.C.C. work including bending, binding

and placing in position complete upto floor

11 88.00 Brick work using common burnt building

Cmt. bricks having crushing strngth not less than

35 Kg./cm2 in super structure for Ground

Floor in C.M. (1:6) (1 Cement, 6 fine sand)

racking out joints curring etc. complete

directed by Engineer-in-charge. 4121.55 Cmt.

12 27.00 Providing and laying and fixing 50 mm thick

Smt. expansion joint by hydro cell semi rigid UV

resistance with high performance laminated

closed cell polythene foam joint filler in

sheet foam as directed, etc. complete.

SBD SECTION-7 BILL OF QUANTITIES-560

13 1823.00 Providing 15 mm. thick cement plaster in

Smt single coat on Rough (similar) side of single

or half brick walls for interior plastering

upto floor two level and finished even and

smooth in. (II) cement mortar 1 : 4 (1

cement : 4 sand) Extra over item 58 to

for finishing with a floating coat of neat

cement slurry. (upto 10 ton) 220.61 Smt.

14 1823.00 Finishing wall with water proof exterior

Smt emulsion apex paint of on wall surfaces

(two coats) to give an approved brand and

manufacture and of required slope evan

shade after throughly brushing the surface

to remove all dirt and remains of loose

powered materials. etc completed. 117.40 Smt.

15 150.00 Steel work, welded in built up sections

Q framed work including cutting, hoisting,

fixing in position and applying a priming

coat of red lead paint. (A)In beams and

joists, channels angles Tees, flats, with

connecting plates or angle cleats as in main

and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the

16 763.28 Painting two coats (including priming coat)

Smt. on new steel and other metal surface with

enamel paint, brushing, interior to give an

even shade including cleaning the surface

an even shade including cleanicn the surface

of all dirt, dust and other foreign matter.

17 1032.00 Chain link 2 10 x 10 gauge (Galvanised)

Smt. 256.78 Smt.

SBD SECTION-7 BILL OF QUANTITIES-561

PADRA NAGARPALIKA PADRA

CONSTRUCTION WORK OF PATHWAY & RAILING AT GOVINDPURA POND AT PADRA.

Item Qty. Description Total Unit Amount

1 1620.00 Excavation for foundation up to 1:5 mt.

Cmt. Depth including sorting out and

stacking of useful materials and

depositing of the excavated stuff up to

2 396.00 Filing available excavated earth

Cmt. (excluding rock) in trenches plinth sides of

foundations etc. in layers not exceeding

20cm. In depth consolidating each

deposited layer by remming and

3 339.00 Providing and laying cement concrete

Cmt. 1:4:8 (1-Cement : 4-fine sand : 8-graded

birck aggregates 40 mm nominal size) and

curing complete excluding cost of form

work in (a) Foundation and plinth.

4 328.50 Brick work using common burnt clay

Cmt. building bricks having crushing strength

not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1-

Cement : 6 -fine sand)(B) Conventional

5 165.50 Brick work using common burnt clay

Cmt. building bricks having crushing strength

not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1-

Cement : 6 -fine sand)(B) Conventional(

Extra for brick work in superstructure

above plinth level upto floor two level (B)

SBD SECTION-7 BILL OF QUANTITIES-562

6 18.50 Providing and laying controlled cement

Cmt. concrete M-200 and curing complete

including the cost of formwork and

excluding the cost of reinforcement of

reinforced concrete work in

-- do -- for Coping

7 73.50 Providing and Laying ordinary cement

Cmt. concrete 1:2:4 (1- Cement 2- coarse sand

: 4- graded stone aggregates 20 mm

nominal size) and finishing smooth with

curing etc. complete including the cost of

formwork but excluding the cost of

reinforsement for R.C.C work in (ii) Slabs

having more than 8 cm and upto

8 9200.00 T.M.T. Bars

Kgs. Providing TMT Bar FE 500D reinforcement

for R.C.C. work including bending, binding

and placing in position complete upto

floor two level

9 1417.50 Providing 15mm thick cement plaster in

Smt single coat on Rough (Similar)side of

single or half brick walls for interior

plastering upto floor two level and

finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand)) Extra over

items 58 to 64 for finishing with a floating

coat of neat cement slurry.

10 13790.00 Providing and fixing M.S. grills of required

Kgs. pattern to frames of gril etc. with M.S.

flats at required spacings and frame

alround, square or round bars with round

headed bolts and nuts or by screws. (B)

ORNAMENTAL GRILL

11 1417.50 Finishing wall with water proof exterior

Smt emulsion apex paint of on wall surfaces

(two coats) to give an approved brand

and manufacture and of required slope

evan shade after throughly brushing the

surface to remove all dirt and remains of

loose powered materials. etc completed.

SBD SECTION-7 BILL OF QUANTITIES-563

12 1103.00 Painting two coat (Including priming

Smt coat) on new steel and other metal

surface with enamel paint, brushing,

interior to give an evel shade including

cleaning the surface an even shade

including cleanicn the surface of all dirt,

dust and other foreing matter.

13 483.00 Filling in foundation and plinth with brick

Cmt Bats Chhara in layers of 20cm. thickness

including watering, remming and

consolidating etc. complete.

14 95.00 Rough Kotach stone Slab. 25 mm thick

15 983.00 Providing and fixing pre-cast Rubber Dye /

Smt steel Dye inter locking concrete block

60mm thick with grade of concrete M300

pnumatic compressed / vibrated

mechanically and as per approved design

Confirming to IS 15658 : 2006 including

35 mm Sand layer for levelling and filling

the joint with sand in proper line and

level as per guidlines of IRC : SP 63-2018

16 1205.00 Providing and fixing pre-cast concrete

Rmt kerb stone of gray cement based concrete

block 30cm length,30cm height and 15cm

thick of M200 grade concret as per

approved design and including excavation

for fixing in proper line and level,filling

the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

17 1050.00 Providing cement vata (10cm. x 10 cm.

Rmt size) quarter round in cement mortar 1:1

including neat cement finishing, watering

18 90.00 PVC SWR pipes IS 13592 for Drain -

SBD SECTION-7 BILL OF QUANTITIES-564

18 199.00 providing & laying Accupressure Pathway

Smt with 100mm thick C.C 1:2:4 Layeron

150mm thick P.C.C 1:3:6 Laying With

Screen gravel of 20 nominal size and

coarse Aggregat of 10 to 20 mm size to be

fixed on C.C 1:2:4 Layer to suite the

walking on pathway complete with

allkinds of Labour ,material ,Carting

,Chrges As Direct on Site by Engineer in

SBD SECTION-7 BILL OF QUANTITIES-565

PADRA NAGARPALIKA PADRA

CONSTRUCTION WORK OF SECURITY CABIN AT GOVINDPURA POND AT PADRA

Qty. Description Unit Amount

1 23.40 Excavation for Foundation upto 1.5 m. Depth including

Cmt. sorting out and stacking of useful materials and disposing

of excavated stuff upto 50 Meter lead (A) (loose or soft

2 3.90 Excavation for base footings upto depth 1.5 m. including

Cmt. sorting out and disposing of the excavated material upto

50 m lead (loose or soft soil) 133.05 Cmt.

3 21.00 Filling available excavated earth (excluding Rock) in

Cmt. trenches. Plinth, sides of foundations etc. in layers not

exceeding 20cm. In depth consolidating each disposited

layer by ramming and watering.

4 3.60 Filling in foundation and plinth with murrum or selected

Cmt. soil in layers of 20cm thickness including watering,

ramming and consolidating etc. complete.

5 13.35 Carrying out plinth treatment to post construction/

Smt. existing structure by spraying chemical solution for

termite control treatment including labour and material

consistment with I.S.I specification. Using Chlordene and

chiorpurfiles 20 EC. As per 6131_paret-II consteration

weight one percent is recommended i.e. one litre 20 EC

chemical emulsion with 19 liter give 1% concrentration

inclusive of one litre chemical emulsion application at the

rate of 5 litre chemical/sqm of surface as recommended

6 3.30 Providing and laying cement concrete 1:4:8 (1- Cement : 4-

Cmt. coarse sand : 8- hand broken stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

7 0.75 Providing and laying cement concrete 1:3:6 (1 Cement :

Cmt. coarse sand : 6 hand broken stone aggregates 40 mm

nominal size) and curing complete excluding cost of form

work in (A) Foundation and plinth. ( upto 10 ton)

SBD SECTION-7 BILL OF QUANTITIES-566

8 2.90 Providing and Laying controlled cement concrete M-250

Cmt. and curing complete, including the cost of formwork but

excluding the cost of reinforcement for reinforced

concrete work in Column footings.

9 0.95 Providing and laying controlled cement concrete M-250

Cmt. and curing complete including the cost of formwork But

Excluding the cost of reinforcement for reinforced

concrete work in Column upto Plinth Level having any

cross section area.

10 1.15 Providing and Laying controlled cement concrete M-250

Cmt. and curing complete, including the cost of formwork but

excluding the cost of reinforcement for reinforced

concrete work in Columns having any cross section area

upto floor two level.

11 1.30 Providing and laying controlled cement concrete M-250

Cmt. and curing complete including the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in Ground Beam having any cross section

12 0.35 Providing and laying controlled cement concrete M-200

Cmt. and curing complete including the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in coping.

13 0.50 Providing and laying controlled cement concrete M-200

Cmt. and curing complete including the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in Lintel for all floor.

14 0.35 Providing and laying controlled cement concrete M-200

Cmt. and curing complete including the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in Chajja for all floor.

15 3.30 Providing and laying controlled cement concrete M-200

Cmt. and curing complete including the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in Slab having any thickness for all floors.

16 1.50 Providing and laying controlled cement concrete M-200

Cmt. and curing complete including the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in Beams having any cross section area for

SBD SECTION-7 BILL OF QUANTITIES-567

17 1223.00 T.M.T. Bars

Kgs. Providing T.M.T. Bar Fe 500. reinforcement for

R.C.C.work including bending, Binding and placing in

postion complete upto foor two level.(upto 10 ton)

18 1.15 Providing and Laying brick work using common burnt clay

Cmt. building bricks (Conventional)having crushing strength not

less than 35 Kg./Sq.Cm in foundation and plinth in Cement

Mortar. (1:6) (1 Cement : 6 fine sand)- (A)Conventional.

19 6.50 Brick work using common burnt clay building bricks having

Cmt. crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:6 (1- Cement :

6 -fine sand)(B) Conventional ( Extra for brick work in

superstructure above plinth level upto floor two level (B)

20 1.90 Providing and fixing flush door shutters, soild core

Smt. construction with frame of first class hardwood with

crossboard and face veneer or plywood face panels,

including anodised aluminium butt hinges with necessary

screws. (B) Non-decorative type and block board core

anodised aluminium butt hinges in flush door shutters. (2)

21 5.80 Providing & fixing window having extruded aluminum

Smt. Colour Powder Coated section frame main outer size

95mm x 24mm x 1.17mm (of Jindal Section no:2459 @

wt.of 0.738 Kg/mt), horizontal Three track member size

92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@

Wt.1.07 Kg/mt), vertical member of size 92mm x

31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt.

Kg/mt) with sliding shutters of horizontal member size

mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of

0.456 Kg/mt), vertical member of size 40mm x 18mm x

1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/

with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to frame as per

details etc .Complete for Window.

22 195.00 Providing and fixing M. S. grills of requried pattern to

Kgs. wooden frames of window etc. with M. S. flats at requried

spacings and frame alround square or round bars with

round headed bolts and nuts or by screws. (B) Plain Grills.

SBD SECTION-7 BILL OF QUANTITIES-568

23 7.65 Applying Priming Coat on new steel and other metal

Smt. surface by throughly cleaning, oil, grease and scoured with

brushes fine steel wood, scrapers and sand paper with

ready mixed priming paint brushing red lead and Painting

two coats with synthetic enamel paint, brushing to give an

even shade including cleaning the surface of all dirt, dust

and other foreign matter.

24 38.35 Providing 20 mm thick double coat mala cement plaster

Smt. on interior brick / concrete work for plastering comprising

of base coat of 12 mm thick cement plaster in cement

mortar (1 Cement : 4 coarse sand) in rough finishing and

mm thick top coat of cement mortar 1:2 (1 Cement :

Coarse sand) finished with trovel including scaffolding

curing etc. complete.

25 17.85 Providing 10mm thick cement plaster in single coat on

Smt. brick/concrete walls for interior plastering upto floor two

level and finished even and smooth in (ii) Cement mortar

1:4 (1-cement :4-sand) Extra over items 58 to 64 for

finishing with a floating coat of neat cement slurry. Extra

over items 58 to 71 for plastering on ceilings and sofits of

stairs upto floor two level instead of plastering on walls.

26 43.55 Providing and laying 15mm thick cement plaster in single

Smt. coat Rough (Similar) side of single or Half brick walls for

interior plastering upto floor two level and finished even

smooth in (i) C.M. (1 : 4) (1 -Cement : 4 -sand ) including

neat Cement slury finishing scaffolding, curing etc.

27 50.75 Providing 20 mm thick sand faced cement plaster on wall

Smt. upto height 10 meters above ground level consisting of

12mm thick backing coat of c.m 1:3 (1 cement : 3 sand )

and 8 mm thick finishing coat of c.m 1:1 (1 cement :

sand ) etc. complete.

28 38.35 Applying two coats of Birla (White Cement based) or Asian

Smt. acrylic lappy (putty) or equivalent & two coats of primer of

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand Papered smooth.

SBD SECTION-7 BILL OF QUANTITIES-569

29 99.75 Distempering (Three Coat) with oil bound washable

Smt. distemper of approved brand and manufacture and of

required shade on wall surfaces to give and even shade

over and including a primer coat with alkali resistance

primer of approved brand after throughly brushing the

surface free from other foreign matter and also including

preparing the surface even and sand papered smooth.

30 17.85 Distempering (Three Coat) with oil bound washable

Smt. distemper of approved brand and manufacture and of

required shade on Ceiling & Sloping Roof surfaces to give

and even shade over and including a primer coat with

alkali resistance primer of approved brand after throughly

brushing the surface to give and free from other foreign

matter and also including preparing the surface even and

sand papered smooth.

31 50.75 Finishing wall with Weather Proof Acrylic Exterior

Smt. Emulsion Paint on wall surface (two coats) to give and

required shape even shade and of approved brand and

manufacturer after throughly brushing the surface to

remove all dirts, and remians of loose powdered materials

32 13.35 Providing and laying 24"x24" Vitrified 8 mm to 10mm

Smt thick tiles flooring over 20 mm (average) base of cement

mortar 1:6 (1 Cement : 6 Coarse Sand) and jointed with

colour cement slurry including finished with flush pointing

and cleaning the surface etc. complete. For Flooring

33 1.40 Providing and laying 24"x24" Vitrified 8 mm to 10mm

Smt thick tiles flooring over 20 mm (average) base of cement

mortar 1:6 (1 Cement : 6 Coarse Sand) and jointed with

colour cement slurry including finished with flush pointing

and cleaning the surface etc. complete.For Skirting

34 8.80 Providing and laying polished Granite tiles 18 mm thick in

Smt risers of steps, skirting Dedo and pillars laid on 10 mm

thick cement mortar 1 : 3 (1 cement : 3 course sand) and

jointed with gray cement slurry mixed with pigment to

match the shade of slab including rubbing, polishing,

Moulding etc. complete. For Flooring, Doors & Windows

Add Electrical As per Sub Estimate

SBD SECTION-7 BILL OF QUANTITIES-570

PADRA NAGARPALIKA PADRA

ELECTRIFICATION INSTALLATION IN IN SECURITY CABIN AT GOVINDPURA POND AT

SR DESCRIPTION QTY RATE AMOUNT

1 Point wiring for Light / Bell with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected concealed

in/ on surface on wall/ceiling complete with 6A Modular

type switch / bell push & accessories and earth continuity

of following type, erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic

front plate modules erected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete. Cat.III

2 Point wiring for FAN with 2-1.5 sq.mm & earthwire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade

FRLS PVC insulated multistrand copper wires, in following

type of pipe to be erected concealed in / flushed on

wall/ceiling complete with 6A Modular type switch and

hum free EME four or more step type electronic fan

regulator with separately mounted and accessories with

earth continuity of following type erected on PVC /

Metallic box, single mounting base frame covered with

textured/metallic front plate modules erected on / in

wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete. Cat.III

3 Point wiring for Individual Plug with & earthwire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires, in following type

of to be erected concealed in / on surface of wall / ceiling

complete with Modular type switch & 5 pin Plug erected

on PVC / Metallic box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe 1.00 702.96

erected with following type of accessories.

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete. Cat.III

SBD SECTION-7 BILL OF QUANTITIES-571

4 [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete. Cat.III

5 Point wiring for Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic box,

single mounting base frame covered with textured / 2.00 257.55

metallic front plate modules erected on / in wall /

ceiling with following type accessories Cat. III

6 Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed

7 Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes. (2) 25 mm

8 Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe

to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (a) with medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm

9 Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe

to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of 10.00 112.11

green colour for earth continuity of following size (a) with

medium class Rigid PVC pipe and accessories (a) 2 wire

10 Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of 1.00 2445.21

same company of MCB to be used) suitable for (B)(iii)

Three phase 8 way SS Double door for horizontal single

11 providing and erecting Miniature circuit breaker single

pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in 2.00 112.11

existing box. confirming to IS 8828/1996 with ISI Mark

12 Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity (B) 40 Amp. Cat.III

SBD SECTION-7 BILL OF QUANTITIES-572

13 Providing & erecting L.T. Current Transformer with bar

primary 50/5 to 1000/5 ratio 15 VA burden erected in

existing CRCA box duly secured with insulating materials

connected to the meter

14 Supplying and erecting approved make set of indicator

lamps of LED type lamp, lens cover, Bakelite holder

complete erected with necessary connections.

15 Supplying & erecting funnel type earthing having earth

plate of following size burred in specifically prepared

earth pit 3 mtr. below ground with 40 kg. charcoal and

salt with alternate layers of charcoal & salt, 20mm.dia.

G.I. pipe with Funnel with a wire mesh for watering &

bricks masonry block, C.I. Cover complete as per para

of IS 3043 with necessary length of double Galvanised

Iron / copper earth wire No 6 SWG bolted with lug to the

plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long

complete connected to the nearest switch gear with end

socket as per direction & duly tested by earth tester

confirming to IS (As per drawing) with following

(B) With 45 x 45 x 0.35 cms. C.I. earth plate 1.00 2568.43

16 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. (e) One wire 6.00 sq. mm

17 Making trench in soft soil of suitable width of 90 cms

deep for laying cable or locating the fault all over the run

and backfilling the same and making the surface as

18 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for 5.00 51.51

following size of cables. (f) 2 to 4 core 25 Sq. mm

19 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for 5.00 247.45

following size of cables. (H) 3 & 1/2 core 240 Sq. mm

20 Solderless crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved 5.00 15.15

SBD SECTION-7 BILL OF QUANTITIES-573

21 Providing and erecting Approved make Ceiling fan with

double ball bearing ISI mark with condenser A.C.

23OV.50 c/s.1200 mm. sweep complete, canopy and

cms. down rod erected on existing hook or clamp with 1.00 1596.81

24/0.2 , 3 core flexible wire with earthing. [Make shall be

approved by Engineer in charge]

22 Providing 2.5mm.thick laminated acrylic sheet to cover

the fan hook or Fan box.

23 Providing Fan clamp of 30 x 5 mm flat of required length

& 10 mm M.S. Bolt & Nuts erected with necessary hook 1.00 98.98

of 10 mm M.S. Round Bar.

24 Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95,

THD < 15%,CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges

shown.) (A) Tube Light with integral driver

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet

25 Approved make C.F.L. Retrofit 13/15/18 Watt erected if

26 Supplying & erecting approved make low noise

decorative exhaust fan having square frame ABS body

with inbuilt lowers & square frame. 200mm with

SBD SECTION-7 BILL OF QUANTITIES-574

PADRA NAGARPALIKA PADRA

CONSTRUCTION WORK OF DRINKING WATER FACILITY AT GOVINDPURA POND AT PADRA

Item Qty. Description Total

1 26.95 Excavation for base footings upto depth

Cmt. m. including sorting out and disposing of

the excavated material upto 50 m lead

(loose or soft soil) 120.01 Cmt.

2 17.50 Filling available excavated earth (excluding

Cmt. rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding

cm. in depth consolidating each disposited

layer by ramming and watering.

3 2.20 Filling in foundation and plinth with murrum

Cmt. or selected soil in layers of 20cm thickness

including watering, ramming and

consolidating etc. complete. 296.29 Cmt.

4 7.32 Carrying out plinth treatment to post

Smt. construction/existing structure by spraying

chemical solution for termite control

treatment including labour and material

consistment with I.S.I specification. Using

Chlordene and chiorpurfiles 20 EC. As per

6131_paret-II consteration weight one

percent is recommended i.e. one litre 20 EC

chemical emulsion with 19 liter give 1%

concrentration inclusive of one litre

chemical emulsion application at the rate of

5 litre chemical/sqm of surface as

recommended as per I.S.

SBD SECTION-7 BILL OF QUANTITIES-575

5 5.25 Providing and laying cement concrete 1:4:8

Cmt. (1- Cement : 4- coarse sand : 8- hand

broken stone aggregates 40 mm nominal

size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

6 4.10 Providing and Laying controlled cement

Cmt. concrete M-250 and curing complete,

including the cost of formwork but

excluding the cost of reinforcement for

reinforced concrete work in Column

footings. 4707.61 Cmt.

7 0.45 Providing and laying controlled cement

Cmt. concrete M-250 and curing complete

including the cost of formwork But

Excluding the cost of reinforcement for

reinforced concrete work in Column upto

Plinth Level having any cross section area.

8 1.00 Providing and Laying controlled cement

Cmt. concrete M-250 and curing complete,

including the cost of formwork but

excluding the cost of reinforcement for

reinforced concrete work in Columns having

any cross section area upto floor two level.

Rate Analysis No :-

9 1.15 Providing and laying controlled cement

Cmt. concrete M-250 and curing complete

including the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in Ground Beam

having any cross section area. 5875.17 Cmt.

10 0.45 Providing and laying controlled cement

Cmt. concrete M-200 and curing complete

including the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in coping. 6218.57 Cmt.

SBD SECTION-7 BILL OF QUANTITIES-576

11 0.45 Providing and laying controlled cement

Cmt. concrete M-200 and curing complete

including the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in Lintel for all

floor. 7854.77 Cmt.

12 0.20 Providing and laying controlled cement

Cmt. concrete M-200 and curing complete

including the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in Chajja for all

floor. 6555.91 Cmt.

13 1.75 Providing and laying controlled cement

Cmt. concrete M-200 and curing complete

including the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in Slab having any

thickness for all floors. 6661.96 Cmt.

14 1.25 Providing and laying controlled cement

Cmt. concrete M-200 and curing complete

including the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in Beams having

any cross section area for all floors.

1400.00 Providing TMT Bar FE 500D reinforcement

Kgs. for R.C.C. work including bending, binding

and placing in position complete upto floor

two level 77.29 Kg.

16 1.65 Brick work using common burnt clay

Cmt. building bricks having crushing strength not

less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -

fine sand)(B) Conventional

SBD SECTION-7 BILL OF QUANTITIES-577

17 7.34 Brick work using common burnt clay

Cmt. building bricks having crushing strength not

less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -

fine sand)(B) Conventional (Extra for brick

work in superstructure above plinth level

upto floor two level (B) Conventional)

18 2.10 Providing and fixing flush door shutters,

Smt. soild core construction with frame of first

class hardwood with crossboard and face

veneer or plywood face panels, including

anodised aluminium butt hinges with

necessary screws. (B) Non-decorative type

and block board core anodised aluminium

butt hinges in flush door shutters. (2)

mm thick. 1829.74 Smt.

19 1.45 Providing & fixing window having extruded

Smt. aluminum Colour Powder Coated section

frame main outer size 95mm x 24mm x

1.17mm (of Jindal Section no:2459 @ wt.of

0.738 Kg/mt), horizontal Three track

member size 92mm x 31.75mm x 1.30mm

(of Jindal Section no:8688,@ Wt.1.07

Kg/mt), vertical member of size 92mm x

31.75mm x 1.50mm (of Jindal Section

no:8933,@ Wt. 1.06 Kg/mt) with sliding

shutters of horizontal member size

mmx18mm x1.29mm (of Jindal Section

no:8947@ wt.of 0.456 Kg/mt), vertical

member of size 40mm x 18mm x 1.29 mm

(of Jindal Section no:8949 @ wt.of

0.456Kg/mt/ with 5 mm thick transparent

bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to

frame as per details etc .Complete for

SBD SECTION-7 BILL OF QUANTITIES-578

20 90.00 Providing and fixing M. S. grills of requried

Kgs. pattern to wooden frames of window etc.

with M. S. flats at requried spacings and

frame alround square or round bars with

round headed bolts and nuts or by screws.

(B) Plain Grills 105.18 Kg.

21 38.80 Applying Priming Coat on new steel and

Smt. other metal surface by throughly cleaning,

oil, grease and scoured with brushes fine

steel wood, scrapers and sand paper with

ready mixed priming paint brushing red lead

and Painting two coats with synthetic

enamel paint, brushing to give an even

shade including cleaning the surface of all

dirt, dust and other foreign matter.

22 16.05 Providing 10mm thick cement plaster in

Smt. single coat on brick/concrete walls for

interior plastering upto floor two level and

finished even and smooth in (ii) Cement

mortar 1:4 (1-cement :4-sand) Extra over

items 58 to 64 for finishing with a floating

coat of neat cement slurry. Extra over items

58 to 71 for plastering on ceilings and sofits

of stairs upto floor two level instead of

plastering on walls.

23 40.20 Providing and Laying 20 mm thick sand face

Smt. cement plaster on Walls upto height of

mts. Above ground level consisting of

12mm thicjk backing coat of C.M 1:3 (1

Cement, 3 Sand ) and 8 mm thick finishing

coat of C.M 1:1 (1 Cement, 1 Sand) etc.

complete. 337.52 Smt.

SBD SECTION-7 BILL OF QUANTITIES-579

24 54.85 Distempering (Three Coat) with oil bound

Smt. washable distemper of approved brand and

manufacture and of required shade on wall

surfaces to give and even shade over and

including a primer coat with alkali

resistance primer of approved brand after

throughly brushing the surface to give and

even shade free from foreign matter and

also including preparing the surface even

and smooth. 101.75 Smt.

25 40.20 Finishing wall with weather proof exterior

Smt. emulsion paint on wall surface (two coats)

to give an required shape even shade after

thoroughly brushing the surface to remove

all dirt, and remains of loose powdered

materials.etc complete

26 14.70 Providing & Laying 24 "x 24" vitrified 8 mm

Smt. thick tile flooring over 20 mm ( average)

base of cement mortar 1:6 (1: cement :

coarse sand ) on new surface or fixing on

existing flooring by adhesive material

including dismentaling of existing flooring

and jointed with color cement slurry

including finised with flush pointing &

cleaning the surface etc. complete for

antiskit . (upto 10 ton) 1432.78 Smt.

27 9.50 Providing and laying white glazed tiles 6mm

Smt thick in skitring risers of steps and dado on

10mm thick cement plaster 1:3 (1 cement :

3 coarse sand) and pointing in white cement

jointed with white cement slurry.

SBD SECTION-7 BILL OF QUANTITIES-580

28 6.45 Providing and laying polished Granite tiles

Smt 18 mm thick in risers of steps, skirting Dedo

and pillars laid on 10 mm thick cement

mortar 1 : 3 (1 cement : 3 course sand) and

jointed with gray cement slurry mixed with

pigment to match the shade of slab

including rubbing, polishing, Moulding etc.

complete. For Flooring, Doors & Windows

29 7.50 Providing and laying China Mosaic type

Smt. water proofing treatment in terrace

including (a) Applying neat cement slurry

2.75 Kgs./Smt. of cement admix with water

proofing compound after cleaning the

surface (b) laying cement concrete using

brick bats 25mm to 100mm isze with 50%

cement mortar 1:5 (1 Cement : 5 Coarse

Sand) admixed mortar proofing compound

over 20mm thick layer of cement mortar

1:5 to required slope including rounding of

junctions of walls and slabs (c) after two

days of proper curing applying a second

coat of cement slurry (d) finished the

surface with 20mm thick cement mortar 1:4

(1 Cement : 4 Coarse Sand) and china

mosaic tiling & finally finishing the surface

with trowel with white cement slurry (e)

after finishing the whole terrace shall be

flooded with water for a period of two

30 3.50 Providing and fixing on wall face C.I. Rain

Rmt. water pipe including filling the joints with

spun yarn soaked in neat cement slurry and

cement mortar 1:2 (1- Cement : 2-fine sand)

(A) 75 mm dia 293.62 Rmt.

31 4.00 Providing and fixing 15mm. Dia C. P. Brass

Nos. screw down bib cock of approved quality

including fixing the same in pipeline and

testing etc. complete as directed by

Engineer-in-charge. 186.83 No.

SBD SECTION-7 BILL OF QUANTITIES-581

32 1.00 Providing and fixing 15mm. Dia C. P. Brass

No. stop cock of approved quality including

fixing the same in pipeline and testing etc.

complete as directed by Engineer-in-charge.

33 1.00 Providing and fixing gun metal chek or non

return fullway wheel valve. (A) 15 mm Dia.

34 4.00 Providing and fixing 100 mm dia sand cast

iron grating for gully, floor or nanhi trap.

35 2.00 Providing and fixing 150mm x 100mm size

No. "P" or "S" type square mount stone ware

gully trap with c. I. Grating brick masonry

chamber and water tight C. I. Cover with

frame of inside 300mm x 300mm size with

cutting and making good the walls floors

etc. complete as directed by Engineer-in-

charge. 1246.92 No.

36 1.00 Providing, laying and constructing brick

Nos. masonry chamber for underground C. I.

Inspection Chamber with Inside Dimension

600mm x 850mm x 450mm dedo for single

pipe line with bends having crushing

strength not less than 35Kg./Cm2 on C. M.

(1:5) (1 cement, 5 Sand) C. I. Cover with

frame (light duty) of 455mm x 610mm

internal dimension total weight of cover

with frame to be not less than 38.00 Kgs.

(Wt. of Cover 23 Kgs. and wt. of Frame

Kgs.) with R.C.C. top slab with 1:2:4 (1

cement, 2 Coarse sand, 4 graded stone

(Kapachi) ) foundation concrete 1:5:10 (1

cement, 5 Coarse sand, 10 brick bats of

40mm nominal size) inside plaster 15mm.

thick with C. M. 1:3 (1 cement, 3 Coarse

sand) finished smooth with a floating coat

of neat cement slurry on walls and bed

concrete including curing etc. complete as

directed by Engineer-in-charge.

SBD SECTION-7 BILL OF QUANTITIES-582

37 500.00 Supplying And fixing PVC water tank of ISI

Lits. make including delivery at site, supply and

fixing inlet, outlet, overflow, ballcock,

drainage sleeves of specific size, with

necessary neoprene gasket / packing /

washer, G.I.washer, and checknut etc.

compt as directed on terrace,loft,bathroom

etc in any height.The rate shall be include

for fixing additional accessories supplied by

supplyer accessories.

38 50.00 Providing, laying and jointing in true line

Rmt. and level 32 mm dia U.P.V.C. Pipe (SCH-40)

including fittings make as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two

meter c/c. or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the

same with adhesive solvent, including cost

of all materials.

39 20.00 Providing, laying and jointing in true line

Rmt. and level 25 mm dia U.P.V.C. Pipe (SCH-40)

including fittings make as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two

meter c/c. or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the

same with adhesive solvent, including cost

of all materials.

40 20.00 Providing, laying and jointing in true line

Rmt. and level 15 mm dia U.P.V.C. Pipe (SCH-40)

including fittings make as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two

meter c/c. or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the

same with adhesive solvent, including cost

of all materials.

SBD SECTION-7 BILL OF QUANTITIES-583

41 1.00 Providing & erecting water cooler having

No. storage capacity 150 Ltr. & cooling capacity

150 Ltr.per hour @ an ambient temp of 45˚

C. The outlet temp. of the water should

drop by 15˚C within a hour, The water

cooler should be comprising of hermetically

sealed compressor, fan motor, condensing

unit, water tank surrounded by evaporating,

coil, thermostats, relay etc.complete with

necessary inlet & outlet connection. The

body of water cooler will be made from

Stainless Steel.

42 1.00 Supplying & erecting 5 stage single reverse

No. osmosis water purification system with M.S.

powder coated frame, prefilter housing

with 'O' ring presediment filter GAC filter,

carbon filter suitable buster DC pump

capacity 80 psi, mention with 40 psi inline

type post carbon filter auto low & high

pressure switches with following size of

storage tank & LPH capacity & erected as

directed [C] 50 Ltr / Hr with 150 psi 2 nos

Add Electrical as Per Sub Estimate

SBD SECTION-7 BILL OF QUANTITIES-584

PADRA NAGARPALIKA PADRA

PROVIDING ELECTRIFICATION INSTALLATION IN IN WATER ROOM AT GOVINDPURA POND AT PADRA.

SR DESCRIPTION QTY UNIT RATE AMOUNT

1 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected concealed in/ on

surface on wall/ceiling complete with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC / Metallic

box, single mounting base frame covered with textured/metallic front plate 5.00 Pt. 449.45

modules erected on / in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete. Cat.III

2 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected concealed in / flushed on

wall/ceiling complete with 6A Modular type switch and hum free EME four

or more step type electronic fan regulator with separately mounted and

accessories with earth continuity of following type erected on PVC / Metallic 1.00 Pt. 638.32

box, single mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete. Cat.III

3 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires,

in following type of to be erected concealed in / on surface of wall / ceiling

complete with Modular type switch & 5 pin Plug erected on PVC / Metallic

box covered with appropriate front plate modules erected on / in wall / 1.00 Pt. 702.96

ceiling as per pipe erected with following type of accessories.

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete. Cat.III

4 [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessories erected flushed on 1.00 Pt. 711.04

wall/ceiling complete. Cat.III

5 Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic box, single mounting base frame covered with

textured / metallic front plate modules erected on / in wall / ceiling with

following type accessories Cat. III

6 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with 12.00 Mtr. 33.33

following dia of pipes, in approved manner as directed (b) 25 mm

7 Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

coupling, PVC bushes, Check-nuts etc. complete of following sizes. (2) 25 mm 25.00 Mtr. 21.21

8 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated 25.00 Mtr. 82.82

stranded wire of green colour for earth continuity of following size (a) with

medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

9 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of 10.00 Mtr. 112.11

green colour for earth continuity of following size (a) with medium class

Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

SBD SECTION-7 BILL OF QUANTITIES-585

10 Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house 1.00 Ea. 2445.21

appropriate nos. of MCBs.(The DBs should be used of same company of MCB

to be used) suitable for (B)(iii) Three phase 8 way SS Double door for

horizontal single phase outgoing

11 providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

12 Providing & erecting 240 V MCB double pole switch for motor & inductive

load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity (B) 40 Amp. Cat.III

13 Providing & erecting L.T. Current Transformer with bar primary 50/5 to

1000/5 ratio 15 VA burden erected in existing CRCA box duly secured with 1.00 Ea. 274.72

insulating materials connected to the meter

14 Supplying & erecting funnel type earthing having earth plate of following

size burred in specifically prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of charcoal & salt, 20mm.dia. G.I.

pipe with Funnel with a wire mesh for watering & bricks masonry block, C.I.

Cover complete as per para 7.3 of IS 3043 with necessary length of double

Galvanised Iron / copper earth wire No 6 SWG bolted with lug to the plate

and covered in 12 mm dia. G.I. pipe 2.5 mtr long complete connected to the

nearest switch gear with end socket as per direction & duly tested by earth

tester confirming to IS (As per drawing) with following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate 1.00 Ea. 2568.43

15 Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC insulated conforms to IS 694, IEC -

227 erected in existing pipe of following size (Specifically for control panel, 5.00 Mtr. 56.56

relays, power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required. (e) One wire 6.00 sq. mm

16 Making trench in soft soil of suitable width of 90 cms deep for laying cable or

locating the fault all over the run and backfilling the same and making the 5.00 Mtr. 55.55

surface as normal ground.

17 Providing and, fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (e) 2 to 4 core 25 Sq. mm

18 Providing and, fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (H) 3 & 1/2 core 240 Sq. mm

19 Solderless crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved 5.00 Ea. 15.15

20 Providing and erecting Approved make Ceiling fan with double ball bearing

ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete,

canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2 1.00 Ea. 1596.81

, 3 core flexible wire with earthing. [Make shall be approved by Engineer in

21 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan

22 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt

& Nuts erected with necessary hook of 10 mm M.S. Round Bar.

23 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.95, THD <

15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED

driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges

SBD SECTION-7 BILL OF QUANTITIES-586

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet Cat-lll 3.00 Ea. 535.30

24 Approved make C.F.L. Retrofit 13/15/18 Watt erected if required 1.00 Ea. 137.36

25 Supplying & erecting approved make low noise decorative exhaust fan

having square frame ABS body with inbuilt lowers & square frame. 200mm 1.00 Ea. 1366.53

with 1350RPM Cat.II

SBD SECTION-7 BILL OF QUANTITIES-587

PADRA NAGARPALIKA PADRA

PROVIDING AND LAYING OF 2000 MM DIA R.C.C. NP4 PIPE DRAIN FOR GOVINDPURA

POND, AT,PADRA.

Sr. Qty. Total Per Amount

1 320.00 Excavation for pipe line trenches for water

Cmt. supply, sewerage line, manhole etc. all with

shoring and struting if required as per required

gradient and line including safety provisions

using site rails and stacking excavated stuff

including up to all required lead cleaning the site

etc. complete for all lifts and strata as specified.

In all sorts of soil and soft murrum Upto 1.50 mt

2 256.00 Excavation for pipe line trenches for water

Cmt. supply, sewerage line, manhole etc. all

withshoring and struting if required as per

required gradient and line including

safetyprovisions using site rails and stacking

excavated stuff including up to all required

leadcleaning the site etc. complete for all lifts

and strata as specified. In all sorts of soil and soft

murrum 1.50 mt to 3.00 mt depth

3 70.00 Providing and supplying ISI Standard R.C.C.

Rmt. pipes(of Sulphate Resisting Cement) in standard

lengths of following

class and diameter suitable for either collar

joints or rubber ring joints including all taxes,

insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc.

complete. (IS - 458/ 1989 110 x 63 mm 90 x

Note : One collar should be supplied with each

full length plain ended RCC pipe, cost included in

rates below. One

rubber ring should be supplied with each full

length socketed pipe, cost included in rates

below.(2000 MM DIA NP4 PIPE )

2000 mm Dia NP4 21095.87 Rmt.

SBD SEC-7 BILL OF QUANTITIES-588

4 70.00 Lowering, laying and jointing R. C. C. pipes in C.

Rmt. M. 1:1 1/2 of following diameters in proper

position, grade and alignment at all level as

directed by Engineer-in-charge including

conveyance from stores to site of work, labour,

giving hydraulic testing as per ISI code

5 22.00 Providing and casting in situ mass cement

Cmt. concrete in 1:4:8 proportion using granite

quartzite trap metal of size 25 mm to 40 mm

including consolidation curing etc. complete.

6 3.00 Construction of Brick masonry chamber for pipe

Nos. drain including excavation, p.c.c. (1:4:8), c.c.

(1:2:4) benching, Brick Wall 350 mm thick, M-

200 coping, M-200 slab, 10 mm thick (1:3)

smooth plaster and including heavy duty FRC

frame and cover with all necessary labour and

material in all respect directed by EIC.

Inner Clear Dimensions 3.00 x 3.00 x 2.50 Avg.

depth 154546.09 No.

SBD SEC-7 BILL OF QUANTITIES-589

PADRA NAGARPALIKA PADRA

CONSTRUCTION WORK OF CHAMBER FOR 2000 MM DIA PIPE DRAIN SIZE 3.00 x

3.00 x 2.50Avg. Depth

SUB ESTIMATE FOR CHAMBER

Item Qty. Description Total Unit Amount

1 25.22 Excavation for base footings upto depth

Cmt. m. including sorting out and disposing of the

excavated material upto 50 m lead (loose or

(A) In loose or Soft Soil 120.01 Cmt.

2 34.96 Excavation for foundation for depth from

Cmt. m to 3.0 m including sorting out and stacking

of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A) Loose

(A) In loose or Soft Soil 133.05 Cmt.

3 2.52 Providing and laying cement concrete 1:4:8

Cmt. (1- cement : 4-coarse sand : 8- hand broken

stone aggregates 40mm nominal size) and

curing complete excludig cost of formwork in

(A) foundation and plinth.

4 13.84 Brick work using common burnt clay building

Cmt. brick having crushing strength not less than

35 Kg/Sq.cm in foundation and plinth in

cement mortar 1:6 (1 cement : 6 fine sand)

(B) Conventional (upto 10 ton).

5 33.46 Providing 10 mm thick cement plaster in

Smt. single coat on brick/concrete wall for

interior plastering upto floor two level

finished even and smooth in (1:3) (1 cement

: 3 sand) curing etc. complete. 178.55 Smt.

SBD SECTION-7 BILL OF QUANTITIES-590

6 3.48 Providing and laying controlled cement

Cmt. concrete M-200 and curing complete

including the cost of formwork but Excluding

the cost of reinforcement for reinforced

concrete work in Slab having any thickness

for all floors. 7402.29 Cmt.

7 521.99 Providing TMT Bar FE 500D reinforcement

Kgs. for R.C.C. work including bending, binding

and placing in position complete upto floor

two level 77.29 Kg.

8 12.00 Providing Cement Vata (10 cm x 10 cm size)

Rmt. quarter round in cement mortar 1:1

including neat cement finishing watering etc.

complete. 24.28 Rmt.

9 100.00 Providing and fixing M.S. Plain Grills of

Kg. required pattern to wooden frames of

windows etc. with M.S. Flats at required

spacing and frame alround, square or round

bars with round headed bolts and nuts or by

screws.For All Floors.(for Manhole Cover)

SBD SECTION-7 BILL OF QUANTITIES-591

PADRA NAGARPALIKA PADRA

PROVIDING,SUPPLYING AND LAYING OF 600 MM DIA RCC NP-3 PIPE DRAIN NEAR

GOVINDPURA POND AT PADRA

Qty. DESCRIPTION Per Amount

1 246.60 Excavation for pipe line trenches for water

Cmt. supply, sewerage line, manhole etc. all with

shoring and struting if required as per required

gradient and line including safety provisions

using site rails and stacking excavated stuff

including up to all required lead cleaning the

site etc. complete for all lifts and strata as

specified. In all sorts of soil and soft murrum

Upto 1.50 mt depth

2 137.00 Supplying and fixing reinforced concrete heavy

Rmt. duty non-pressure pipes with collars for culverts

carrying heavy traffic as per Indian Railway

Standard Specification including setting and

joining for pipes in C:M 1:2 watering and laying

(To level or slope) of I.S. Class NP-3 of following

internal dia meter. 600 mm Dia

3 173.00 Lowering, laying and jointing R. C. C. pipes in C.

Rmt M. 1:1 1/2 of following diameters in proper

position, grade and alignment at all level as

directed by Engineer-in-charge including

conveyance from stores to site of work, labour,

giving hydraulic testing as per ISI code 600 mm

SBD SEC-7 BILL OF QUANTITIES-592

4 5.00 Construction of Brick masonry chamber for pipe

Nos. drain including excavation, p.c.c. (1:4:8), c.c.

(1:2:4) benching, Brick Wall 350 mm thick, M-

200 coping, M-200 slab, 10 mm thick (1:3)

smooth plaster and including heavy duty FRC

frame and cover with all necessary labour and

material in all respect directed by EIC.

Inner Clear Dimensions 1.20 x 1.20 x 1.20 34511.92 No.

SBD SEC-7 BILL OF QUANTITIES-593

PADRA NAGARPALIKA PADRA

CONSTRUCTION WORK OF CHAMBER 600 MM DIA PIPE DRAIN SIZE

1.20x1.20x1.20 Avg. Clear Depth

Item Qty. Description Total Unit Amount

1 7.26 Excavation for base footings upto depth

Cmt. m. including sorting out and disposing of the

excavated material upto 50 m lead (loose or

2 1.84 Excavation for base footings upto depth

Cmt. m. including sorting out and disposing of the

excavated material upto 50 m lead (loose or

(A) In loose or Soft Soil 133.05 Cmt.

3 0.22 Providing and laying cement concrete 1:4:8

Cmt. (1 Cement, 4 coarse sand, 8 hand broken

stone aggregates 40mm. Nominal size) and

curing ecomplete excluding cost of

formwork in (A) Foundation and Plinth.

4 0.40 Providing and laying cement concrete 1:2:4

Cmt. (1- cement : 2-coarse sand : 4- graded stone

aggregates 20mm nominal size) and curing

complete excludig cost of formwork in (A)

Foundation and Plinth. 3656.13 Cmt

5 3.27 Brick work using common burnt building

Cmt. bricks having crushing strngth not less than

35 Kg./cm2 in super structure for Ground

Floor in C.M. (1:6) (1 Cement, 6 fine sand)

racking out joints curring etc. complete

directed by Engineer-in-charge. 4121.55 Cmt.

6 5.04 Providing 10mm thick cement plaster in

Smt. single coat on brick/concrete wall for

interior plastering upto floor two level

finishing even and smooth in 1:4 (1 cement,

4 sand). 143.66 Smt.

SBD SECTION-7 BILL OF QUANTITIES-594

7 0.83 Providing and laying controlled cement

Cmt. concrete M-200 and curing complete

including the cost of formwork but Excluding

the cost of reinforcement for reinforced

concrete work in Slab having any thickness

for all floors. 4946.98 Cmt.

8 58.10 Providing TMT Bar FE 500D reinforcement

Kgs. for R.C.C. work including bending, binding

and placing in position complete upto floor

9 4.80 Providing Cement Vata (10 cm x 10 cm size)

Rmt. quarter round in cement mortar 1:1

including neat cement finishing watering etc.

complete. 24.28 Rmt.

10 80.00 Providing and fixing M.S. Plain Grills of

Kg. required pattern to wooden frames of

windows etc. with M.S. Flats at required

spacing and frame alround, square or round

bars with round headed bolts and nuts or by

screws.For All Floors.(for Manhole Cover

with frames) 105.18 Kg.

SBD SECTION-7 BILL OF QUANTITIES-595

PADRA NAGAR PALIKA, PADRA

HORTICULTURE SERVICES AT GOVINDPURA POND DEVEPLOPMENT AT PADRA

Sr. NO Item Discription Total Unit Rate Amount

1 Clearing jungle including uprooting of rank vegetation, grass, brush wood,

trees and saplings of girth up to 30 cm measured at a height of 1 m above

ground level and removal of rubbish up to a distance of 50 m outside the

periphery of the area cleared.

2 Good garden soil

Supplying and stacking of good earth at site including royalty and carriage

upto 5 km complete (earth measured in stacks will be reduced by 20% for

3 Cow dung manure

Supplying and stacking of well decayed cattle manure at site including royalty

and carriage upto 5 k.m. lead complete (cattle manure measured in stacks

will reduced by 8% for Payment)

4 Rough dressing the trenched ground including breaking clods.

5 Fine dressing of the ground

6 Mixing earth and sludge or manure in the required proportion specified or

directed by the Officer-in-charge

7 Spreading of sludge, dump manure and/or good earth in required thickness

as per direction of officer-in-charge (cost of sludge, dump manure and/ or

good earth to be paid separately)

8 Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm

thickness of existing ground prepared with proper level and ramming with

required tools wooden and than rolling the surface with light roller make the

surface smoothen and light watering the same maintenance for 30 days or

more till the grass establish properly,as per direction of officer in charge

8.1 Supplying of healthy, disease-free Vetiver (Chrysopogon zizanioides)

plants/slips**, minimum height 20–30 cm with well-developed roots, at site

of work. Plants shall be transported carefully to avoid damage. Fixing shall

include making planting holes of suitable depth and spacing (generally 0.25 m

to 0.30 m c/c both ways or as directed by Engineer-in-Charge), placing plants

in position, refilling with good soil, watering and compacting to ensure

survival. The work includes all labour, material, watering, tools, tackles etc.

SBD SECTION-7 BILL OF QUANTITIES-596

9 Tree plantation:

Digging holes in ordinary soil and refilling the same with the excavated earth

mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked

volume of earth after reduction by 20% : 1 part of stacked volume of manure

after reduction by 8%) flooding with water, dressing including removal of

rubbish and surplus earth, if any, with all leads and lifts (cost of manure,

sludge or extra good earth if needed to be paid for separately)

2.14.3 Holes 60 cm dia, and 60 cm deep

10 Preparation of beds for hedging and shrubbery by excavating 60 cm deep and

trenching the excavated base to a further depth of 30 cm, refilling the

excavated earth after breaking clods and mixing with sludge or manure in the

ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one

part of stacked volume of sludge or manure after reduction by 8%), flooding

with water, filling with earth if necessary, watering and finally fine dressing,

leveling etc. including stacking and disposal of materials declared

unserviceable and surplus earth by spreading and leveling as directed, within

a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra

earth to be paid for separately)

11 Plantation of Trees, at site i/c watering and removal of unserveiceable

material’s as per direction of officer in charge (excluding cost of plant &

12 Providing (Purchase) of various type tree Including cost of expertise,

transportation, loading, unloading, all taxes etc. complete as per specification

and as directed by Muni. Engineer-in-charge.

12.1 Azadirachta indicia (Neem) height 120-130cm in big polybag size 25 cm 55.00 Nos 72.92

12.2 Bassia latifolia (Mahua) height 90-105 cm. in big polybag size 25 cm 55.00 Nos 71.71

12.3 Bauhinia purpurea (Kachnar) height 150-165 cm. in big polybag size 25 cm

12.4 Delonix regia (Gulmohar) height 150-165 cm. in big poly bag size 25 cm 55.00 Nos 65.65

12.5 Ficus benghalensis (Banyan) height 120-135 cm. in big poly bag size 25 cm

12.6 Bottle palm ht. 150-180 cm bottom girth 20-25 cm well developed in big poly

bag size 25 cm 50.00 Nos 196.95

12.7 Ficus religiosa (Pepal) height 150-165 cm. in big poly bag size 30 cm 50.00 Nos 72.92

12.8 Tamarindus indica (Imli) height 120-150 cm. in big polybag size 25 cm 52.00 Nos 87.52

12.9 Terminalia arjuna height 150-165 cm. in big polybag size 25 cm 52.00 Nos 65.65

SBD SECTION-7 BILL OF QUANTITIES-597

12.10 Phyllanthus emblica (Amla) height 150-165 cm. in Big HDPE Bag 50.00 Nos 98.48

12.11 Mimusops elengi (Maulsri) height 180-195 cm., well developed with thick

stem in big in big size HDPE bag 50.00 Nos 137.36

12.12 Providing and stacking of Spathodea campanulata height 150-165 cm. in poly

bag size 25 cm as per direction of the officer-in-charge. 52.00 Nos 82.67

12.13 Providing and stacking of Cassia fistula (Amaltash) height 120-135 cm. in poly

bag size 25 cm as per direction of the officer-in-charge. 53.00 Nos 70.50

12.14 Providing and stacking of Cassia siamea height 150-165 cm. in poly bag size

25 cm as per direction of the officer-in-charge. 55.00 Nos 72.92

12.15 Providing and stacking of Lagerstroemia flosreginae height 150-165 cm.in

poly bag size 25 cm as per direction of the officer-in-charge. 55.00 Nos 131.30

12.16 Providing and stacking of Mangifera indica (Mango-grafted ) of height 60-75

poly bag of size 25 cm as per direction of the officer-in-charge. 20.00 Nos 60.80

12.17 Providing and stacking of Tamarindus indica (Imli) of height 120-150 cm. in

poly bag of size 25 cm as per direction of the officer-in-charge. 20.00 Nos 87.49

12.18 Providing and stacking of Eugenia jambolana (Jamun) of height 150-165 cm.

in poly bag of size 25 cm as per direction of the officer-in-charge. 20.00 Nos 85.09

12.19 Providing and stacking of Phyllanthus emblica (Amla) of height 150-165 cm.

in Big HDPE Bag as per direction of the officer-in-charge. 20.00 Nos 98.48

12.2 Providing and stacking of rayan of height 120-150 cm. in poly bag of size

cm as per direction of the officer-in-charge. 15.00 Nos 75.75

12.21 Providing and stacking of Pomegranate of height 120-150 cm. in poly bag of

size 25 cm as per direction of the officer-in-charge. 15.00 Nos 116.15

12.22 Providing and stacking of custard apple of height 120-150 cm. in poly bag of

size 25 cm as per direction of the officer-in-charge. 20.00 Nos 119.18

12.23 Providing and stacking of badam of height 120-150 cm. in poly bag of size

cm as per direction of the officer-in-charge. 20.00 Nos 55.55

SBD SECTION-7 BILL OF QUANTITIES-598

13 Providing and stacking of shrubs of height 60-90 cm. in poly bags of size 15-

20 cm as per direction of the officer-in-charge. (Select shrubs as per attached

shrub list/specifications)

13.1 Ficus panda of height 90-105 cm. with 10-12 branches and healthy foliage,

well formed in cement pot of size 30 cm 170.00 Nos 246.79

13.2 Gardenia jasminoides of height 45-60 cm. with 3-4 branches in earthen pot of

size 20 cm 170.00 Nos 54.69

13.3 Hamelia patens of height 90-105 cm. bushy in big size HDPE bag 150.00 Nos 109.43

13.4 Hibiscus rosasinensis of height 90-105 cm., bushy in big size HDPE bag 170.00 Nos 98.48

13.5 Providing and stacking of Caesalpinia pulcherrima species of height 45-60 cm.

in earthen pot of size 20 cm as per direction of the officer-incharge.

13.6 Mussaenda erythrophylla (Rosea) of height 60-75 cm. multi branched in

earthen pot of size 25 cm 150.00 Nos 120.34

13.7 Nerium oleander (kaner) of height 60-75 cm. with 5-6 branches in poly bag of

size 25 cm 146.00 Nos 43.78

13.8 Providing and stacking of Mimusops elengi (Maulsri) of height 150-165 cm. in

poly bag of size 25 cm as per direction of the officer-in-charge.

13.9 Providing and stacking of Alstonia scholaris of height 150-165 cm. in bag of

cm as per direction of the officer-in-charge. 30.00 Nos 71.71

13.1 Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm

Earthen pot of size 20 cm as per direction of the officer-in-charge. 30.00 Nos 43.78

13.11 Providing and stacking of Albizzia lebbek of height 150-165 cm. in bag of size

25 cm as per direction of the officer-in-charge. 30.00 Nos 70.50

13.12 Providing and stacking of Michelia champa (Golden Champa) of height 90-

105 cm. in earthen pot of size 25 cm as per direction of the officer-in-charge.

13.13 Providing and stacking of Millingtonia hortensis of height 150-165 cm. in poly

bag of size 25 cm as per direction of the officer-in-charge. 36.00 Nos 76.56

SBD SECTION-7 BILL OF QUANTITIES-599

13.14 Providing and stacking of Cestrum nocturnum (Raat ki Rani) of height 60-75

cm. with 4-5 branches in bag of size 25 cm as per direction of the officer-in-

charge. 36.00 Nos 42.57

13.15 Providing and stacking of Murraya exotica of height 45-60 cm. in poly bag of

size 15 cm as per direction of the officer-in-charge. 36.00 Nos 17.02

13.16 Providing and stacking of Gardenia jasminoides of height 45-60 cm. with 3-4

branches in earthen pot of size 20 cm as per direction of the officer-in-charge.

13.17 Providing and stacking of Rose of height 45-60 cm. in poly bag of size 15 cm

as per direction of the officer-in-charge. 36.00 Nos 17.17

13.18 Providing and stacking of angelonia angustifolia of height 45-60 cm. in poly

bag of size 15 cm as per direction of the officer-in-charge. 36.00 Nos 121.20

13.19 Providing and stacking of Cestrum diurnum of height 45-60 cm. in poly bag of

size 15 cm as per direction of the officer-in-charge. 34.00 Nos 126.25

13.20 Providing and stacking of Hibiscus rosasinensis of height 60-75 cm. with 5-6

in p.bag of size 25 cm as per direction of the officer-in-charge. 150.00 Nos 49.84

13.21 Providing, stacking and Displaying Ixora singaporensis different colour having

30 cm and above ht., well developed with fresh & healthy foliage with bloom

in 25 cmEarthen Pot/Plastic Pot and as per direction of the officer-in-charge.

13.22 Providing and stacking of Allamanda cathartic of height 30 cm to 45 cm. in

cm size of Earthen pot / Plastic pot as per direction of the officer-in-charge.

13.23 Providing and stacking of Caesalpinia pulcherrima species of height 45-60 cm.

inearthen pot of size 20 cm as per direction of the officer-in-charge.

13.24 Providing and stacking of Tecoma gaudichaudi of height 60-75 cm. with 5-6

branches in p.bag of size 25 cm as per direction of the officer-in-charge.

13.25 Providing and stacking of Tecoma capensis of ht 30-40 cm, healthy, well

developed in Poly Bag as per direction of the officer-in-charge. 150.00 Nos 60.20

13.26 Providing and stacking of Galphimia nitida of ht 20-25 cm, healthy, well

developed in Poly Bag as per direction of the officer-in-charge. 144.00 Nos 48.63

SBD SECTION-7 BILL OF QUANTITIES-600

13.27 Providing and stacking of Stachytarpheta mutabilis of ht 20-25 cm, healthy,

well developed in Poly Bag as per direction of the officer-in-charge.

13.28 Providing and stacking of Bauhinia tomentosa (yellow) of height 60-75 cm. in

earthen pot of size 20 cm as per direction of the officer-in-charge. 100.00 Nos 43.78

13.29 Providing and stacking of Jatropha multifida (red colour) of height 45-60 cm.

with 2-3 branches in earthen pot of size 20 cm as per direction of the officer-

in-charge. 100.00 Nos 38.89

13.3 Providing and stacking of Caesalpinia pulcherrima species of height 45-60 cm.

in earthen pot of size 20 cm as per direction of the officer-in-charge.

13.31 Providing and stacking of Tecoma capensis of ht 30-40 cm, healthy, well

developed in Poly Bag as per direction of the officer-in-charge. 100.00 Nos 30.40

13.32 Providing and stacking of Galphimia nitida of ht 20-25 cm, healthy, well

developed in Poly Bag as per direction of the officer-in-charge. 100.00 Nos 25.55

13.33 Providing, stacking and Displaying Lantana sp. of White colour, well

developed with fresh & healthy foliage with bloom in 20 cm Earthen

Pot/Plastic Pot and as per direction of the officer-in-charge. 100.00 Nos 47.37

13.34 Providing, stacking and Displaying Lantana sp. of purple colour, well

developed with fresh & healthy foliage with bloom in 20 cm Earthen

Pot/Plastic Pot and as per direction of the officer-in-charge. 100.00 Nos 47.37

13.35 Providing and stacking of Hibiscus rosasinensis of height 45-60 cm. with 3-4

branches in earthen pot of size 20 cm as per direction of the officer-in-charge.

13.36 Providing and stacking Wadelia trilobata, full of leaves in Poly Bag and as per

direction of the officer-in-charge. 100.00 Nos 7.27

13.37 Providing and stacking Clerodendrum inerme having ht. 25 cm to 30 cm multi

branched in 25 cm size of Earthen Pot / Plastic Pot and as per direction of the

charge. 104.00 Nos 24.29

13.38 Providing and stacking ipomea batata green having ht. 25 cm to 30 cm multi

branched in 25 cm size of Earthen Pot / Plastic Pot and as per direction of the

charge. 104.00 Nos 30.30

SBD SECTION-7 BILL OF QUANTITIES-601

13.39 Providing and stacking of stachytarpheta indica of ht 20-25 cm, healthy, well

developed in Poly Bag as per direction of the officer-in-charge. 110.00 Nos 30.30

13.40 Providing, stacking and Henna Plant of height 25 to 30 cm., 2 to 3 suckers in

20 c.m Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

SBD SECTION-7 BILL OF QUANTITIES-602

PADRA NAGARPALIKA PADRA

CONSTRUCTION WORK OF PUMP ROOM AT GOVINDPURA POND AT PADRA

Item Qty. Total Unit Amount

1 32.00 Excavation for foundation upto depth

m.Depth including sorting out and stacking of

useful material and disposing off the excavated

stuff upto 50 m lead (loose or soft soil)

2 5.00 Excavation for foundation for depth 1.5 m. to

3.0 m including sorting out and stacking of

useful material and disposing off the excavated

stuff upto 50 m lead (loose or soft soil)

3 24.00 Filling available excavated earth (excluding rock)

in trenches plinth, sides of foundations etc. in

layers not exceeding 20 cm in depth

consolidating each deposited layer by ramming

and watering. 133.65 Cmt.

4 10.50 Filling in foundation and plinth with murrum or

selected soil in layers of 20cm thickness

including watering, ramming and consolidating

etc. complete. 296.29 Cmt.

5 16.00 Applying General insecticide pest control

treatment to floors, cup boards etc. including

labour material etc. complete. Using

Heptachloride 20 EC. As per 6113_pests

constructions weight 0.50 percent is

recommended one litre chemical emulsion

dillute with 39 liter of water will give. total

dillute concentration will be 40 litre inclusive of

one litre chemical emulsion application 0.5 litre

chemical/ sqm of surface is recommended as

SBD SECTION 7 BILLOF QUANTITIES-603

Item Qty. Total Unit Amount

6 7.50 Providing and laying cement concrete 1:3:6 (1

Cement, 3 coarse sand, 6 hand broken stone

aggregates 40mm. Nominal size) and curing

ecomplete excluding cost of formwork in (A)

Foundation and Plinth.( More then 10 ton)

7 Providing and laying controlled cement

concrete M-250 and curing complete Including

the cost of formwork But Excluding cost of

reinforcement of reinforced concrete work in

a. 5.00 -- do -- for R.C.C. Column Footing 4707.61 Cmt.

b. 1.00 -- do -- for R.C.C. Column upto PL 7623.48 Cmt.

c. 2.00 -- do -- for R.C.C. Column Super Structure 8780.94 Cmt.

d 2.50 -- do -- for Ground Beam 5875.17 Cmt.

8 Providing and laying controlled cement

concrete M-200 and curing complete Including

the cost of formwork But Excluding cost of

reinforcement of reinforced concrete work in

a 2.00 -- do -- for RCC Flooring 6218.57 Cmt.

a 0.50 -- do -- for Coping 6218.57 Cmt.

b 1.00 -- do -- for R.C.C. Lintel 7854.77 Cmt.

c 1.50 -- do -- for R.C.C. Chajja 6555.91 Cmt.

d 2.00 -- do -- for R.C.C. Beam 6182.21 Cmt.

e 3.50 -- do -- for R.C.C. Slab 6661.96 Cmt.

SBD SECTION 7 BILLOF QUANTITIES-604

Item Qty. Total Unit Amount

9 1840.00 Providing TMT Bar FE 500D reinforcement for

R.C.C. work including bending, binding and

placing in position complete

upto floor two level 77.29 Kg.

10 5.00 Brick work using common burnt clay building

bricks having crushing strngth not less than

Kg./cm2 in C.M. foundation and plinth (1:6) (1

Cement, 6 fine sand) (B)Conventional racking

out joints curring etc. complete directed by

Engineer-in-charge. ( more than ten ton )

11 14.00 Brick work using common burnt building bricks

having crushing strngth not less than

Kg./cm2 in super structure for Ground Floor in

C.M. (1:6) (1 Cement, 6 fine sand)

(B)Conventiona racking out joints curring etc.

complete directed by Engineer-in-charge.

12 4.00 Providing and Fixing Rolling Shutters of

approved make made of 80 mm wide M.S. laths

inter-locked together through their entire

length and jointed together at the ends by end

locks mounted on specially designed pipe shaft

with bracket plates, guide channels and

arrangements for inside and outside locking

with push-pull operation including the cost of

hood cover and spring etc. complete (B) Shutter

having width below 3.5 m

13 0.50 Providing and fixing glazed louverd glass

windows and ventilators with teakwood frame

10cm x 7cm size including the cost of oil

painting to wood work etc. complete.(up to

Ton) 4202.12 Smt.

14 Providing and fixing M. S. grills of requried

pattern to wooden frames of window etc. with

M. S. flats at requried spacings and frame

alround square or round bars with round

headed bolts and nuts or by screws.

(A) 250.00 Plain Grill 105.18 Kg.

SBD SECTION 7 BILLOF QUANTITIES-605

Item Qty. Total Unit Amount

15 18.00 Painting two coats (Including Priming Coat) on

new steel and other metal surfaces with

synthetic enamel paint brushing,interior to

give enamel paint brushing, interior to give an

even shade including cleaning the surface an

even shade including cleaning the shurface of all

dirt, dust and other foreign matter.

16 53.00 Providing and laying 15mm thick cement plaster

in single coat Rough (Similar) side of single or

Half brick walls for interior plastering upto floor

two level and finished even smooth in (i) C.M.

(1 : 4) (1 -Cement : 4 -sand ) including neat

Cement slury finishing scaffolding, curing etc.

17 16.00 Providing and laying 10mm thick cement plaster

in Single coat on brick/concrete walls for

plastering on ceiling and soffits of stairs upto

floor two level and finished even smooth in (i)

C.M. (1 : 4) (1 -Cement : 4 -sand ) including neat

Cement slury finishing scaffolding, curing etc.

complete. 126.35 Smt.

18 143.00 Providing and Laying 20 mm thick sand face

cement plaster on Walls upto height of 10 mts.

Above ground level consisting of 12mm thick

backing coat of C.M 1:3 (1 Cement, 3 Sand ) and

8 mm thick finishing coat of C.M 1:1 (1 Cement,

1 Sand) etc. complete.

19 69.00 Applying two coats of Birla (white cement

based) or Asian (acrylic lapy-putty)or equivalent

& two coats of primer of approved brand and

manufacture on new wall surface to give an

even shade including thoroughly brushing the

surface from mortar dropping and other foreign

matter and sand papered smooth

SBD SECTION 7 BILLOF QUANTITIES-606

Item Qty. Total Unit Amount

20 53.00 Distempering (Three Coat) with oil bound

washable distemper of approved brand and

manufacture and of required shade on wall

surfaces to give and even shade over and

including a primer coat with alkali resistance

primer of approved brand after throughly

brushing the surface free from other foreign

matter and also including preparing the surface

even and sand papered smooth.

21 16.00 Distempering (Three Coat) with oil bound

washable distemper of approved brand and

manufacture and of required shade on Ceiling &

Sloping Roof surfaces to give and even shade

over and including a primer coat with alkali

resistance primer of approved brand after

throughly brushing the surface to give and free

from other foreign matter and also including

preparing the surface even and sand papered

smooth. 109.91 Smt.

22 143.00 Finishing wall with Weather Proof Acrylic

Emulsion Exterior Paint on wall surface (two

coat) to give and even shade and of approved

brand and manufacture including throughly

brooming and brushing the surface to remove

all dirts, and remians of loose powdered

material. 117.40 Smt.

23 38.00 Providing and laying cement concrete flooring

1:2:4 (1 cement : 5 corase sand :4 graded stone

aggregate 20 mm nominal size) laid in one layer

finished with floating coat of neat cement.

50mm thick (Upto10 ton)

24 3.00 Providing and fixing in position cowel went to

pipes.(B) 75mm dia. 393.04 No

25 4.00 Providing and fixing M.S. Fan clamps type 1 to

16mm dia M.S. bar bent to shape with hooked

ends to R.C.C. slab curing, laying including

painting the exposed portion of loops, all as per

standard design complete. 131.93 No

SBD SECTION 7 BILLOF QUANTITIES-607

Item Qty. Total Unit Amount

26 5.30 Purchasing & supplying at site of works with

railway freight, loading, unloading, carting etc.

complete such as joints, channels, angle irons,

rails etc. complete. M.S. Rails 200 x 100 x 6 mm

M.S. Rails 200 x 100 x 6 mm size 2979.50 R.M.T.

27 0.30 Labour charges for lowering, laying, fixing

various size of M.S. sections such asjoints,

channels, angles, plates etc. complete

28 16.00 Providing and Laying broken China Mosaic

Flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain slope and to be

tempered to bring mortar crème out upto

surface using white cement including rounding

off junctions and extending them up to 15 cm

along the wall clearing with water and oxalic

acid etc. as directed. 765.97 Smt

29 7.50 P.V.C. Pipes 10 kgf / Sq.cm. 75mm dia. 161.77 Rmt.

Add Electrical As Per Sub Estimate

SBD SECTION 7 BILLOF QUANTITIES-608

PADRA NAGARPALIKA PADRA

PROVIDING ELECTRIFICATION INSTALLATION IN PUMP ROOM AT GOVINDPURA POND AT PADRA

SCHEDULE B-12.1

SR DESCRIPTION QTY UNIT RATE AMOUNT

1 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected concealed in/ on

surface on wall/ceiling complete with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC /

Metallic box, single mounting base frame covered with textured/metallic 5.00 Pt. 449.45

front plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete. Cat.III

2 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected concealed in / flushed on

wall/ceiling complete with 6A Modular type switch and hum free EME four

or more step type electronic fan regulator with separately mounted and

accessories with earth continuity of following type erected on PVC / Metallic 1.00 Pt. 638.32

box, single mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete. Cat.III

3 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires,

in following type of to be erected concealed in / on surface of wall / ceiling

complete with Modular type switch & 5 pin Plug erected on PVC / Metallic

box covered with appropriate front plate modules erected on / in wall / 1.00 Pt. 702.96

ceiling as per pipe erected with following type of accessories.

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete. Cat.III

4 [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessories erected flushed on 1.00 Pt. 711.04

wall/ceiling complete. Cat.III

5 Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic box, single mounting base frame covered with

textured / metallic front plate modules erected on / in wall / ceiling with

following type accessories Cat. III

6 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary

PVC fittings & Junction boxes fixed with adhesive solution & Clamps with 12.00 Mtr. 33.33

following dia of pipes, in approved manner as directed (b) 25 mm

7 Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

coupling, PVC bushes, Check-nuts etc. complete of following sizes. (2) 25 mm 25.00 Mtr. 21.21

SBD SECTION-7 BILL OF QUANTITIES-609

8 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC 25.00 Mtr. 82.82

insulated stranded wire of green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

9 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of 10.00 Mtr. 112.11

green colour for earth continuity of following size (a) with medium class

Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

10 Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house 1.00 Ea. 2445.21

appropriate nos. of MCBs.(The DBs should be used of same company of

MCB to be used) suitable for (B)(iii) Three phase 8 way SS Double door for

horizontal single phase outgoing

11 providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

12 Providing & erecting 240 V MCB double pole switch for motor & inductive

load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity (B) 40 Amp. Cat.III

13 Providing & erecting L.T. Current Transformer with bar primary 50/5 to

1000/5 ratio 15 VA burden erected in existing CRCA box duly secured with 1.00 Ea. 274.72

insulating materials connected to the meter

14 Supplying & erecting funnel type earthing having earth plate of following

size burred in specifically prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of charcoal & salt, 20mm.dia. G.I.

pipe with Funnel with a wire mesh for watering & bricks masonry block, C.I.

Cover complete as per para 7.3 of IS 3043 with necessary length of double

Galvanised Iron / copper earth wire No 6 SWG bolted with lug to the plate

and covered in 12 mm dia. G.I. pipe 2.5 mtr long complete connected to

the nearest switch gear with end socket as per direction & duly tested by

earth tester confirming to IS (As per drawing) with following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate 1.00 Ea. 2568.43

15 Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC insulated conforms to IS 694, IEC -

227 erected in existing pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required. (e) One wire 6.00 sq. mm

16 Making trench in soft soil of suitable width of 90 cms deep for laying cable

or locating the fault all over the run and backfilling the same and making 5.00 Mtr. 55.55

the surface as normal ground.

17 Providing and, fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (e) 2 to 4 core 25 Sq. mm

18 Providing and, fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (H) 3 & 1/2 core 240 Sq. mm

SBD SECTION-7 BILL OF QUANTITIES-610

19 Solderless crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved 5.00 Ea. 15.15

20 Providing and erecting Approved make Ceiling fan with double ball bearing

ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete,

canopy and 30 cms. down rod erected on existing hook or clamp with 1.00 Ea. 1596.81

24/0.2 , 3 core flexible wire with earthing. [Make shall be approved by

Engineer in charge

21 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan

22 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt

& Nuts erected with necessary hook of 10 mm M.S. Round Bar. 1.00 Ea. 98.98

23 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power Factor more than 0.95, THD

< 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED

driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet Cat-lll 3.00 Ea. 535.30

24 Approved make C.F.L. Retrofit 13/15/18 Watt erected if required 1.00 Ea. 137.36

25 Supplying & erecting approved make low noise decorative exhaust fan

having square frame ABS body with inbuilt lowers & square frame. 200mm 1.00 Ea. 1366.53

with 1350RPM Cat.II

SBD SECTION-7 BILL OF QUANTITIES-611

PADRA NAGARPALIKA PADRA

DRILLING OF TUBE WELL 250 MM DIA BY D. R. METHOD & 300 MM DIA PIPE WITH 27.5 H. P.

PUMP AT GOVINDPURA POND AT PADRA

Item Qty. Description Total Rate Per Amount

1 80.00 Drilling of 250 mm dia. bore well in all strata

Rmt. including dual over burden strata by

Combination DR / DTH rig including lowering

200 mm dia MS ERW pipes in bore hole as

suggested by Hydrologist

2 48.00 Manufacture, supply and delivery of ISI

Rmt. marked ERW MS pipes conforming to

IS: 4270/2001 with latest amendment

Rates are exclusive of GST

250 mm dia. (Minimum 7.10 mm thick) 3605.70 Rmt.

3 24.00 Providing of 250 mm dia Jhonson Screen

Pipe 1.0mm size. 12400.00 Slots 2258.36 Rmt.

4 8.00 Providing of 250 mm dia Jhonson Screen

Pipe 1.5mm size. 8300.00 Slots 2092.72 Rmt.

5 1.00 Clamps made from MS plate with 3 holes on

No. either side with nuts & bolts of

standard make and suitable size.

900 mm X 100 mm X 16 mm flat suitable for

250 mm dia. pipe. 2037.91 No.

6 1.00 Bore plug of 100 mm height made from MS

No. plate with 3 holes at equal distance on

circumference for nut-bolts type, locking

arrangement with nutsbolts & lock nuts of

iii) Suitable for 250 mmdia pipe 1161.62 No.

7 1.00 M.S. Bail plug having length 0.45 mt. from

No. medium class pipe as per I.S.S. suitable for

250 mm dia pipe. 1065.02 No.

SBD SECTION 7 BILL OF QUANTITIES-612

8 27.00 Steel bend plate suitable to ERW pipe as

Nos. detailed below.

9 8.00 Best quality of well stored Sevalia graval of

Cmt. size 4 mm to 6 mm at site.

10 4.00 Supply of clay balls having size of 25mm to

50mm made from sticky clay at site of work.

Cmt. 758.51 Cmt.

11 1.00 Developing of bore hole of above mentioned

Job. drilled reamed. (900 CFM/200 PSI)

12 1.00 Uptron make Eloctrologger (without carting) 18180.00 Job

13 1.00 Geohydrological ground water

investigations. (with vehical charges).ii)

200/250 mm dia Deep Tube Well (with

water sample) 14428.86 Job

14 1.00 Water Chemical analysis charges 606.00 No.

15 50.00 Providing and supplying D.I. K-9 grade pipes

for following nominal bore diameter with

internal cement mortar lining including all

taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading,

unloading, conveyance to departmental

stores, stacking etc. complete. (IS 8329-

2000) Rate for DI Pipe based on wholesale

Price Index of pig iron as 147.1 for month of

With Excise Duty

Do For 300 mm Dia 3690.54 Rmt

16 25.63 Manufacture, Supply & Delivery of Ductile

Iron Flange socket spigot bends, tees,

reducers or any other specials as per BS-EN-

545/1995 Class-A series K12 suitable for use

with D.I.Pipes manufactured as per

IS:8329/1994delivery of specials is to be

made to GWSSB store or site of works any

where in Gujarat including all taxes, liading,

unloading, carting, stacking, insurance,

inspection charges, octroi etc. complete

80 to 300mm dia 156.55 Kgs

SBD SECTION 7 BILL OF QUANTITIES-613

17 54.00 Excavation for pipe line trenches incl. all

Cmt safety provisions using site rails and stacking

excavated stuff up to a lead of 90 mts.

cleaning the site etc. complete for lifts and

strata as specified.* In all sorts of soil and

* upto 1.5m depth 102.35 Cmt

18 50.00 Lowering, laying and jointing C.I. S & S Spun

Cmt pipes suitable for tyton joints/Mortar lined

D. I. Pipes of various classes with CI/MS

specials of following diameters in proper

position, grade and alignment as directed by

engineer-in-charge including hydraulic

testing etc. complete.

Do For 300 mm Dia 178.25 Cmt

19 4.00 Providing C.C. M - 100 for encasing of Pipe

Cmt Using trap metal size 40 mm to 50 mm

including formwork curing etc. complete.

Do For 300 mm Dia 4567.80 Cmt

20 47.00 Refilling the pipeline trenches including

Cmt ramming, watering, consolidating, disposal

of surplus stuff as directed within a radius of

Do For 300 mm Dia 25.30 Cmt

21 550.00 Providing laying and jointing in true line and

Rmt. level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two

metre C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

SBD SECTION 7 BILL OF QUANTITIES-614

22 250.00 Providing, laying and jointing in true line and

Rmt. level 32 mm dia U.P.V.C. Pipe (SCH-40)

including fittings make as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two

meter c/c. or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

23 150.00 Providing laying and jointing in true line and

Rmt. level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two

metre C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

Add Pumping Set As Per Sub Estimate

SBD SECTION 7 BILL OF QUANTITIES-615

PADRA NAGARPALIKA PADRA

DRILLING OF TUBE WELL 250 MM DIA BY D. R. METHOD & 300 MM DIA PIPE WITH

H. P. PUMP AT GOVINDPURA POND AT PADRA.

DESCRIPTION QTY. UNIT AMOUNT

Supplying at departmental store. Board

Approved make Electric motor driven

submersible pump set conforming to I.S.

8034/198/and motor confirms to IS-9283-

1979 working at 3 phase 400/440 volt

C/S A.C Supply & 2900 R.P.M. for 10" dia

Bore Well. 1200 L.P.M, 63 M. Head.

Flat PVC cable for submersible pump

detailed specification as per GWSSB rate

contract. 1 x 3 x 10 Sq.mm. 50.00 Mt. 291.89

Auto transformer starter suitable for

local & remote pump control application

consisting of Auto Transformer (vacuum

impregnated, air cooled having three (3)

tappings at 50%, 65% and 80%), incomer

MCCB / MPCB, overload relay and

contactors as per Type II coordination

including digital MFM with RS

communication port, analogue type

ammeter with selector switch, run hour

meter, required protective relays &

control accessories. A. T. S. from 21 to

SBD SECTION-7 BILL OF QUANTITIES-616

Labour charges for fixing ATS control

pannel board including carting of control

pannel board from store to site and

including making GE power connection

etc. complete. 1.00 No. 756.49

Supplying & erecting funnel type

earthing having earth plate of following

size burred in specifically prepared

earth pit 3 mtr. below ground with 40 kg.

charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with

Funnel with a wire mesh for watering &

bricks masonry block, C.I. Cover complete

as per para 7.3 of IS 3043 with necessary

length of double Galvanised Iron /

copper earth wire No 6 SWG bolted with

lug to the plate and covered in 12 mm

dia. G.I. pipe 2.5 mtr long complete

connected to the nearest switch gear

with end socket as per direction & duly

tested by earth tester confirming to IS

(As per drawing) with following

specification (A) With 30 x 30 x 0.35 cms:

C.I. earth plate 1.00 No. 2311.89

Providing heavy duty galvanized iron

column pipe threaded at both end

having approx. length of 3 mts.

Confirming to IS 1239(Part-1) with

coupling at one end and threaded

protector at other end size 100mm dia. 60.00 Mt. 743.36

SBD SECTION-7 BILL OF QUANTITIES-617

Providing support clamp of size 450 x

x 10mm, suitable to 100 mm dia pipe. 2.00 Pair 574.69

Providing, Supplying and fitting of ISI

mark Double Flange Sluice Valve

including all taxes, insurance,

transportation, freight charges, octroi,

inspection charges, loading, unloading,

conveyance to departmental stores,

stacking etc. complete with ISI mark only.

P.N. 1.6 with Hand Wheel/Cap Operated

(PD type Short Body)

100 mm Dia. 1.00 Set

Providing, Supplying and fitting of C. I.

Reflux valve tested to pressure of

Kg./Cm2 for seat as per IS-5312,P.N.

100 mm Dia. 1.00 No.

Providing and Fixing C.I./M.S. flanged

with bolts, Rubber Packing etc. complete

(H.D.) 100 mm Dia.

Providing heavy duty 90˚ G. I. Bend R

brand suitable for 100 mm size pipe. 1.00 No.

Heavy duty M.S. coupling 100 mm dia.

mm thick, 150mm long

SBD SECTION-7 BILL OF QUANTITIES-618

Lowering of submersible motor pump set

complete with required Nos. and size of

casing pipes erected by means of proper

chainpulley block and pipe wrenches

after cheking of threads of each pipe

with coupling to take the load of the

pump set and pipe assembly fild up with

water. Upto 60 mtrs. 1.00 No.

Providing bore plate made from 6 mm

thick M.S. plate suitable up to 250 mm

dia bore well pipe.

SBD SECTION-7 BILL OF QUANTITIES-619

PADRA NAGARPALIKA PADRA

SUPPLYING, ERECTING & COMMISSIONING OF STREET LIGHT WITH LED AT GOVINDPURA

POND AT PADRA (15 Rmt C/C )

Sr. Total Unit Amount

Qty Discription

1 650.00 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected

as directed of following size. (A) 2 core 2.5 Sq. mm

2 2.00 providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal current rating up

to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal

connections & complete erected in existing 16 G.M.S.

housing. Cat.II

3 2.00 Approved make ELCBs / RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit

withstand capacity of 6 KA and suitable for operation

on 3 phase and neutral 415V. having characteristic of

quick action & tripping with all advance feature & do

not incorporate any electronic component for following

Max. rating erected as directed.(iii) 63 Amps. FP

Cat.III 3040.10 Ea.

4 65.00 Miniature circuit breaker single pole 6A to 32A suitable

to operate on 240 V A.C. system and having breaking

capacity 10 K.A. to be erected in existing box.

Confirming to IS 8828/1996 with ISI Mark.Cat.II

5 20.00 Providing and erecting Annealed bare Copper wire 8 to

6 65.00 Pipe type earthing having 150 cms.long and 2.5 cms.

dia. galvanised iron pipe with coupling and buch

burried in specially prepared earth pit complete with

necessary 8 SWG earth wire. 368.65 Ea.

SBD SECTION7 BILL OF QUANTITIES-620

7 2.00 Supplying & erecting funnel type earthing having earth

plate of following size burred in specifically prepared

earth pit 3 mtr. below ground with 40 kg. charcoal and

salt with alternate layers of charcoal & salt, 20mm.dia.

G.I. pipe with Funnel with a wire mesh for watering &

bricks masonry block, C.I. Cover complete as per para

7.3 of IS 3043 with necessary length of double

Galvanised Iron / copper earth wire No 6 SWG bolted

with lug to the plate and covered in 12 mm dia. G.I.

pipe 2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction & duly

tested by earth tester confirming to IS (As per drawing)

with following specification.(C) with 60 x 60x

cms. Copper earth Plate

8 65.00 For using salt and charcoal/coke as required for pipe

type earthing. 171.70 Ea.

9 975.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (A)

10 975.00 Providing & laying approved make Double Walled

Corugated pipe (DWC) of polythylene (Confirming to IS-

14930-II) with necessary connecting accessories of

same materials at required depth for laying of cable.

Below ground / road surface for enclosing cable and

back filling the same to make ground as per original. (A)

11 117.00 Supplying following size of Light duty “A” Class G.I.

Pipe & erecting as directed by Engineer-in-charge. (A)

25 mm dia 172.71 Mtr.

12 520.00 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating tape etc

for following size of cables.(D) 2 to 4 core 16 Sq. mm

SBD SECTION7 BILL OF QUANTITIES-621

13 65.00 Supplying and erecting approved make Conical Pole

(Medium Duty ) Made from HR sheet steel. The pole

should be made as per IS. and shall be coated with hot

dip galvanizing as per IS 2629/2633/4759, with

required base plate and integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard

profile 35mmX7.5mm Din-Rail for MCB Mounting, stud

type terminal and arrangement for cable terminations

as erected on suitable foundation (included) with

necessary GI nut-bolts/J-Bolts. as per details given by

manufacturer considering site requirement. The length

of poles are as below.

(E) 7 Mtr. Long 70 mm Top X 175 mm bottom dia,

mm thickness 12240.19 Ea.

14 Providing and erecting Street Light pole bracket

comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for

mm /80mm / required size of pole top having sufficient

fasteners for fixing the brackets and having spread of

1.5.mtr. length with 110 deg.with vertical plane &

suitable welded stays, reducer and with check nuts

complete painted with one coat of Red oxide / PU base

primer and two coats of Aluminium / PU paint. paint

with following nos of arms.

65.00 [A] Single Arm bracket 1 Mtr 561.56 Ea.

15 65.00 Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die

cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed

to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency >

%.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the

ranges shown.) (B) Flood Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage Protection. (ii) above

to 60 Watts Cat-lll

SBD SECTION7 BILL OF QUANTITIES-622

16 2.00 Supplying & erecting approved make Digital time

switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum switching

setup time 1 minimum & LCD display. Also comprised

permanent ON/OFF switching. Programming switches

& housed in fire proof thermoplastic enclosure &

transparent cover erected as required with necessary

connection erected as directed.

17 2.00 Supplying & Erecting Power Contactor for time switch

complete erected as per directions Cat-III. [D] 4 pole

18 2.00 Supplying & erecting IP 55 grade following size section

pillar fabricated from joint less M.S. Sheet with angle

iron legs made from jointless M.S. Angle with cable

clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement

concrete foundation and 45 cms high bricks work

finishing with plaster etc. hinged double door internally

supported on both side, with internal and outside

looking arrangement with look and keys in duplicate

x 35 x 5 mm M.S. Angle of Two Nos. one is welded and

other with nut and bolt for erecting bakelite sheet.

Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof

should be without joint with water leakage proof &

tested as per IP 55 test & followed by IS 2147 of

(B) 75 X 60 X 45 cm section pillar fabricated from

Gauge MS Sheet with angle iron legs 45 cm long made

from 35 X 35 X 5 mm thick MS angle.

SBD SECTION7 BILL OF QUANTITIES-623

PADRA NAGARPALIKA PADRA

DEVLOPEMENT OF CHILDREN PLAY AREA AND PLAYING EQUIPMENT AT GOVINDPURA POND

Item Qty. Description Total Unit Amount

1 188.50 Filling in plinth with sand under floors

Cmt including watering ramming, consolidating

and dressing complete. 460.19 Cmt.

2 40.00 Providing , Supplying & Fixing Reinforced

Nos Cement Concrete Modern RCC Bench, For

Outside, With Back. As Per Directed Engi. In

Charge Icluding Labour, Transpotation. Etc

complete. 5555.00 Nos

3 40.00 HDPE Grade Plastic Material Twin Dustbin

Nos including MS Stand for Road side garbage

collection with all Fixtures. 4038.99 Nos

4 Providing, supplying and fixing Children

playing equipments of Maruti Playground

equipments Co, or equivalent & approved

made including all kind of labor charges and

Tax etc completec with concrete Foundation

as direct on site by engineer in charge.

a 1.00 Fiber spiral slide 9ft high 106555.00 Nos

b 1.00 Double sea Saw 24442.00 Nos

c 1.00 Rocking Boat 12625.00 Nos

d 1.00 Round Jungle Gym 27674.00 Nos

e 1.00 Rainbow climber 35552.00 Nos

f 1.00 Double Swing 18079.00 Nos

g 1.00 Four seater arc swing 92415.00 Nos

h 1.00 Standing Large MGR( Revolvng Plateform) 40299.00 Nos

i 1.00 Swinging Loop Ring 25250.00 Nos

SBD SECTION 7 BILL OF QUANTITIES-624

PADRA NAGARPALIKA PADRA

CONSTRUCTION WORK OF SHOPS AT GOVINDPURA POND AT PADRA.

Qty. Description Unit Amount

1 56.70 Excavation for base footings upto depth

Cmt. m. including sorting out and disposing of

the excavated material upto 50 m lead

(loose or soft soil) 120.01 Cmt.

2 32.50 Filling available excavated earth (excluding

Cmt. rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding

cm. in depth consolidating each disposited

layer by ramming and watering.

3 12.84 Filling in foundation and plinth with murrum

Cmt. or selected soil in layers of 20cm thickness

including watering, ramming and

consolidating etc. complete. 296.29 Cmt.

4 42.77 Carrying out plinth treatment to post

Smt. construction/existing structure by spraying

chemical solution for termite control

treatment including labour and material

consistment with I.S.I specification. Using

Chlordene and chiorpurfiles 20 EC. As per

6131_paret-II consteration weight one

percent is recommended i.e. one litre 20 EC

chemical emulsion with 19 liter give 1%

concrentration inclusive of one litre

chemical emulsion application at the rate of

5 litre chemical/sqm of surface as

recommended as per I.S.

5 15.75 Providing and laying cement concrete 1:4:8

Cmt. (1- Cement : 4- coarse sand : 8- hand

broken stone aggregates 40 mm nominal

size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

SBD SECTION -7 BILL OF QUANTITIES-625

6 8.20 Providing and Laying controlled cement

Cmt. concrete M-250 and curing complete,

including the cost of formwork but

excluding the cost of reinforcement for

reinforced concrete work in Column

footings. 4707.61 Cmt.

7 0.90 Providing and laying controlled cement

Cmt. concrete M-250 and curing complete

including the cost of formwork But

Excluding the cost of reinforcement for

reinforced concrete work in Column upto

Plinth Level having any cross section area.

8 2.50 Providing and Laying controlled cement

Cmt. concrete M-250 and curing complete,

including the cost of formwork but

excluding the cost of reinforcement for

reinforced concrete work in Columns having

any cross section area upto floor two level.

9 2.95 Providing and laying controlled cement

Cmt. concrete M-250 and curing complete

including the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in Ground Beam

having any cross section area. 5875.17 Cmt.

10 1.15 Providing and laying controlled cement

Cmt. concrete M-200 and curing complete

including the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in coping. 6218.57 Cmt.

11 1.05 Providing and laying controlled cement

Cmt. concrete M-200 and curing complete

including the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in Lintel for all

floor. 7854.77 Cmt.

SBD SECTION -7 BILL OF QUANTITIES-626

12 0.60 Providing and laying controlled cement

Cmt. concrete M-200 and curing complete

including the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in Chajja for all

floor. 6555.91 Cmt.

13 6.30 Providing and laying controlled cement

Cmt. concrete M-200 and curing complete

including the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in Slab having any

thickness for all floors. 6661.96 Cmt.

14 4.40 Providing and laying controlled cement

Cmt. concrete M-200 and curing complete

including the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in Beams having

any cross section area for all floors.

3500.00 Providing TMT Bar FE 500D reinforcement

Kgs. for R.C.C. work including bending, binding

and placing in position complete upto floor

two level 77.29 Kg.

16 4.15 Brick work using common burnt clay

Cmt. building bricks having crushing strength not

less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -

fine sand)(B) Conventional

17 24.94 Brick work using common burnt clay

Cmt. building bricks having crushing strength not

less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -

fine sand)(B) Conventional (Extra for brick

work in superstructure above plinth level

upto floor two level (B) Conventional)

SBD SECTION -7 BILL OF QUANTITIES-627

18 26.30 Providing and fixing rolling shutters of

Smt. approved make made of 80 mm wide M.S.

laths inter-locked together through their

entire length and jointed together at the

ends by end locks mounted on specially

designed pipe shaft with bracket plates,

guide channels and arragements for inside

and outside locking with push-pull

operation including the cost of hood cover

and spring etc. complete. (B) Shutters

having width 3.5 M. and above

19 219.00 Providing and fixing M. S. grills of requried

Kgs. pattern to wooden frames of window etc.

with M. S. flats at requried spacings and

frame alround square or round bars with

round headed bolts and nuts or by screws.

(B) Plain Grills 105.18 Kg.

20 167.40 Applying Priming Coat on new steel and

Smt. other metal surface by throughly cleaning,

oil, grease and scoured with brushes fine

steel wood, scrapers and sand paper with

ready mixed priming paint brushing red lead

and Painting two coats with synthetic

enamel paint, brushing to give an even

shade including cleaning the surface of all

dirt, dust and other foreign matter.

21 64.00 Providing 10mm thick cement plaster in

Smt. single coat on brick/concrete walls for

interior plastering upto floor two level and

finished even and smooth in (ii) Cement

mortar 1:4 (1-cement :4-sand) Extra over

items 58 to 64 for finishing with a floating

coat of neat cement slurry. Extra over items

58 to 71 for plastering on ceilings and sofits

of stairs upto floor two level instead of

plastering on walls.

SBD SECTION -7 BILL OF QUANTITIES-628

22 128.75 Providing and Laying 20 mm thick sand face

Smt. cement plaster on Walls upto height of

mts. Above ground level consisting of

12mm thicjk backing coat of C.M 1:3 (1

Cement, 3 Sand ) and 8 mm thick finishing

coat of C.M 1:1 (1 Cement, 1 Sand) etc.

complete. 337.52 Smt.