GENERAL

Dismantling of existing structures (Removal of expansion joint) like Prestressed / reinforced Cement contrete grade M-20 & above by mechanical means including T&P and scaffolding wherever necessary sorting the dismantled material, disposal of unserviceable materials and stacking the materials with all lifts and lead of 1000 m as per MoRTH specification 202, 2.4 II (B) (5th revision)

Providing and laying of a strip seal expansion joint to maximum horizontal movement upto 70 mm, including cost and conveyence of all materials and charges for cutting, fixing & painting exposed surfaces of MS angles with anti corrosive paints etc,. complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or authorised representative ensuring compliance to the manufacturer's instructions for installation and directed by the Engineer-in-charge. and as per Morth Specification NO. 2000 & 2607 (5th Revision)

Vibrated reinforced cement concrete M 35 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) Including cost and conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2300( 5TH Revision) for expansion joint concreting

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (RBR-STCL-5)

Flooring with chequrred terrazzo tiles of 20 mm thick (medium shade) set over base coat of C.M (1:6) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3.kg/sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete for finished item of work (BLD-CSTN-7-4) - 10 Sq.M

Plastering in C.M (1:3) 12 mm thick including cost and conveyance of all Material, Labour for mixing Material, laying and curing etc., complete - 10 Sq.M. (BLD-CSTN-6.2)

Painting with Synthetic Enamel paint TWO Coats of approved quality colour & graded-I over a primary coat of read oxide paint of grade-II to new steel works after the surface are thoroughly cleaned & scrapped including primary coat item of work, cost & conveyance of all Material, Labour charges etc. as per S.S & as directed by the departmental authorities for finished item of work - 10 Sq.M.(Total Three Coats)

Provision for Seignorage Charges

Towards Merit 2% on Seignorage Charges

Towards Consideration amount 100% Seignorage Charges

Towards DMF 30% on Seignorage Charges

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Unforeseen item