COMPREHENSIVE REPAIR AND MAINTENANCE IN THE AOR OF GE (ARMY) NO 2 JODHPUR UNDER AGE B/R (P) NO-1 AS PER CPP SER NO 04

Amount

Attending complaints of leaking/unserviceable pillar cock, wall mixer, bib taps, two way bib taps, stop valves, 15mm-20mm dia for making it fully functonal and leak proof by carefully including taking down, replacing minor unserviceable parts such as rubber washer, leather washers, jumpers brass 15mm-20mm size size complete all as directed and specified.

Attending complaints of leaking/unserviceable low level flushing cisterns, PVC or chinaware for making it fully functional and leak proof by replacing the defective parts such as rubber washers, PVC levers, PVC/CP knobs if required complete all as directed and specified.

Attending complaints of internal water supply pipes, fittings and bottle traps for removing of blockages etc of any description incl removing & clearig of air locks etc by pressure pump o ny other means including taking down and refixing of pipes & fittings and replacing old unserviceable pipes & fittings with new ones complete all as specified and as directed.

Attending complaints of joinery works including refixing of door hinges, door handels, tower bolts etc, welding of any parts of steel windows/chowkhats if any required at site complete all as specified and as directed. .

M&L for cleaning and removing all scale and dirt, etc, from tanks of capacity exc 250 liter but n exc 500 liter, and from mouths of circulating pipes, etc. complete all as specified and as directed. Note: float valve, tank cover etc shall be repaired/ replaced by the contractor if damaged during cleaning without any extra cost.

M&L for cleaning and removing all scale and dirt, etc, from tanks of capacity exc 500 liter but n exc 1000 liter, and from mouths of circulating pipes, etc. complete all as specified and as directed. Note: float valve, tank cover etc shall be repaired/ replaced by the contractor if damaged during cleaning without any extra cost.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

M&L for keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:4 all as specified.

M&L for applying two coats of cement base paint over a coat of primer on walls including preparation of newly plastered/ pointed surface complete all as specified and directed.

S&F 5 cm thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, & in plinth protection templates, etc n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed cement mortar 1:4. complete all as specifed.

Dismantling water tanks of any description in any position exceeding 250 & not exceeding 500 lit capacity complete all as specified and directed.

Dismantling water tanks of any description in any position exceeding 500 & not exceeding 1000 lit capacity complete all as specified and directed.

S&F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, of any colour hoisted and fixed in position with and including all fittings and fixtures in repairs complete all as specified and directed.

S&F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, of any colour hoisted and fixed in position with and including all fittings and fixtures in repairs complete all as specified and directed.

S&F 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed/fixed to pipes/ferrules .

S & F in repair Vitreous china premium/1st quality urinal bowl type of white colour, of size 330x300x450mm incl providing and fixing plugs/brackets, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, pointing urinal back in white cement; connecting for discharge pipe incl necessary packing, union complete all as specified. Make : Hindware/Parryware/Cera/Jaquar as approved by accepting officer

S & F in repair Vitreous china squatting pan of Orissa patten size 580 x 440 white colour including CI S/P trap long size as directed joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in PCC 1:2:4 all as directed and specified. Make : Cera / Parryware / Hindware or equivalent as approved by accepting officer

S & F in repair Vitreous china premium/1st quality wash down water closet pan floor mounting (Semi-pedestal pattern (Anglo Indian) white colour including CI S/P trap as directed including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete in all respect all as specified. Make : Cera / Parryware/Hindware or equivalent as approved by accepting officer

S & F in repairs plastic EWC seat cover, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete

S & F in repair Flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. Make : Hindware / Parryware/Cera or equivalent as approved by accepting officer

S & F in repair Vitreous china premium/1st quality wash basin (under counter), white, size 550x400 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, Make : Hindware / Parryware/Cera or equivalent as approved by accepting officer Note : The items for counter will be measured and paid separately.

S&F vitreous china wash basin,white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated, fancy type, pillar tap, 15mm bore, scrwed down high pressure with or without lettereed hot or cold with long shanks, screwed for iron pipe complete all as specified and directed as in repair.

S&F in repair PVC connection 450mm long and 15 mm dia with brass fly nut at both ends complete.

S & F brass chromium plated Health faucet with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Make : Hindware / Parryware/Cera or equivalent as approved by accepting officer

Supply & Fixing in repair chromium plated shower rose 125mm round shape fancy type fixed to 15mm bore pipe all as specified and directed by Engr-in-charge. as approved by accepting officer

S & F in repair Toilet paper holder with flat recessed type stainless steel Coomplete all as specified and directed. Make - Jaguar /Marc/Prima/Cera/Perryware or equivalent as approved by Accepting Officer.

S & F in repair Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete fixed as in repair in all respect all as specified. Make : Jaquar / Hindware / Cera / Prayag or equivalent as approved by accepting officer

S&F in repairs 15mm bore Brass CP basin mixer for mixing hot & Cold water screwed down for iron pipe complete all as directed by Engineer in charge. Make for mixer : Jaquar/Marc/Prima/Cera/Perryware or equivalent as approved by accepting officer

Supply & Fixing in repair Corner glass shelf size 300 mm radius with and including bracket and glass complete set etc.

Supply & Fixing in repair Glass shelf size 600 mm long with and including bracket and glass complete set etc.

Supply & Fixing in repair stainless steel Towel Rack with lower hanger size 24'' (600 mm) fixed to walls with hook etc. Make : Jaquar /Hindware / Cera/ Prayag/Parryware or equivalent as approved by accepting officer

Supply and fixing in repair of fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing ly nuts for iron pipe of 15mm bore fancy type. Make : Jaquar /Hindware / Cera/ Prayag/Parryware or equivalent as approved by accepting officer

S & F in repair Bib taps, CP, fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete fixed as in repair in all respect all as specified. Make : Jaquar / Hindware / Cera / Prayag or equivalent as approved by accepting officer

S&F in repairs 15mm bore stop valves , cast copper alloy, chromium plated fancy type with long shank cup (Concealed type) screwed down , high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. Make : Jaquar /Hindware / Cera/ Prayag/Parryware or equivalent as approved by accepting officer

S&F in repairs 15mm dia Bib tap (2 in 1 type) of brass, chromium plated fancy type glossy finish fixed in repairs complete all as specified and directed. Make : Jaquar /Hindware / Cera/ Prayag/Parryware or equivalent as approved by accepting officer

S&F in repairs Tubular towel rail brass chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete.

Supply & fixed in repairs stainless steel sink with drainage board , made out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracket of overall size 915x460mm bowl size 410x330x160mm complete all as specified.

Supply & fixed in repairs stainless steel sink, made out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracket of 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified.

S & F in repair Stainless steel grating 150x150 mm size square / rounded as per required shaped with cockroach trap for floor trap fixed in position complete all as specified .

Supply and fixing PVC Flexible waste pipe 32/40 mm dia having length 900mm with socket for steel sink/WHB upto floor level complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed

Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified.

M & L for 75 mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase of flooring / hard standing as specified

M&L for Glazed ceramic glossy finish tiles coloured in vertical surface 450X300X7mm in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Make : Johnson/ Kajaria/Somany/Orient or equivalent as approved by accepting officer

M&L for Non Skid ceramic tiles colour tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified. Note : Work will be in patches or in bulk Make : Johnson/ Kajaria/Somany/Orient or equivalent as approved by accepting officer

M & L for Single charge, stainfree, vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light coloured tiles as in approved shade, set & jointed in neat cement including and over 15mm th screed bed in CM (1:6) and pointed in white coloured cement to match, in floors etc. complete all as specified. Make : Johnson/ Kajaria/Somany/Orient or equivalent as approved by accepting officer

M&L for 25mm thk PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in subbase of floors & finishing the surface even & smooth without using extra cement.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar. Note : Work will be in patches or in bulk.

M&L Machine pressed precast concrete rubber moulded interlocking paver block with grey cement and pigments of any shape and size confirming to IS 15658-2006 of 60 mm thickness,M-35 Grade complete all as specified & directed.and M&L for 30mm thick Sand filling under floors or in foundation including watering and consolidation.

M & L for Granite of black / green / imperial red (colour as approved by Accepting Officer) of any type machine cut as in shelves/steps/counter tops, 20 mm thick, set and jointed in cement slurry over & including screed of 15 mm thick / rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished kota stone slabs and including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified . Note : Single piece should be used in steps/cills/jambs/shelves or equivalent as approved by accepting officer .

M & L for Jaisalmer stone for wall cladding (of any type) 35-55 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone , exc .0.06 sqm but not exc 0.11 sqm ,including cutting and polishing types in wall including 20 mm thick CM 1:4 for laying Jaisalmer stone complete all as specified and direction by the Engineer-in-Charge.

M & L for Machine cut kota stone slab flooring 20-25mm thick over, laid over cement screed base , jointed and pointed with grey cement slurry mixed with pigment over 20mm thick cement mortar 1:6 screed bed to match the shade of the slab including rubbing and polishing complete all as specified and directed. Note : Work will be in patches or in bulk

M & L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 10 mm thick cement plaster 1:3 jointed and pointed with grey cement slurry mxed with pigment to match the shade of the slab including rubbing and polishing complete, all as specified and directed.

M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete.

Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise all as specified and directed.

M & L for Providing precast cement concrete type B-1 (1:2:4) with 20mm garded stone aggregate in copings.apex stones,columns, posts, boundary pillars, frame of jallies etc and setting in mortar 1:4 complete with joints to match.

Dismantling of Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately)

Material & Labour for 35mm thick precast cement concrete louvres and jallies type C-0 (1:3:6) using 12.5mm graded stone aggregate (measured solid), in cluding all mouldings and frame set in cement mortar 1:4.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified & directed by Engineer-in-charge.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type brought upto courses.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M & L for Cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or stone masonary or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cementcomplete all as specified and directed. Note : WPC will be measured and paid separately.

M & L for 15mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or stone masonary or concrete surfaces finished fair & even without using extra cement complete all as specified and directed.

Supply only integral liquid water proofing compound complete all as specified and directed. Make : Pidilite/Sika/Dr Fixit or equivalent as approved by accepting officer.

M&L for preparation of the newly plastered surfaces of walls & applying two coat of oil bound distemper over two coat of wall care putty on wall surfaces complete all as specified and directed.

S & F Venetian blinds screen fabric with 5% openness factor roller type for windows of colour/shade as approved by Accepting Officer complete fixed in position inclusive S&F of all accessories and hardwares for fixing and operation, all as recommended by manufacturer, all as specified incl taking down old curtain rods of any type complete. Make : Vista or equivalent as approved by Accepting Officer.

Taking out from position framed woodwork as in cupboards/cabinets etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & removal of the rubbish outside MD land all as directed at site for overall sizes exc 0.50 sqm but nexc 1.50 sqm & depthd nexc 60 cm complete all as specified and directed.

M&L for polyvinyl chloride (PVC) sheet frame of width 150 mm & 18 mm thickness made out of extruded 18mm PVC sheet UPVC coated Cheluka printed and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification complete all as specified and directed.

M&L for 18 mm thick solid PVC sheet UPVC coated Celuka printed in one or two different colours (with wood grain printed pattern /ivory clour finish) as in kitchen cabinet shutters ,and cupboard shutter all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with 30mm width of flaps (when open) complete all as specified and directed.

Extra over PVC boards for lipping 1-1.5 mm thick 18 mm wide complete all as specified and directed.

S&F 100mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters complete all as specified and directed.

S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved smaple complete all as specified and directed.

Supply and fixing in repairs decorative type curtain rod stainless steel finish of pipe 22 to 25 mm dia with best quality knob metal complete all as specified & directed.

Supply and fixing in repair purpose made brackets trade pattern for decorative type curtain rods suitable for holding 22 to 25 mm dia complete all as specified & directed.

Supply and fixing in repair of decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for 22 to 25 mm dia curtain rods complete all as specified & directed.

Taking down existing wire mesh of any discription and in any position and supplying and fixing Stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, wooden beads etc complete all as specified and directed

Supplying and fixing stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, wooden beads etc complete all as specified and directed

Taking down existing chowkats or frames of any description and in any position exceeding 1.50 sqm but not exceeding 4 sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed.

Taking down existing chowkats or frames of any description and in any position not exceeding 1.50 sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each.

S&F 35 mm thick factory made Plain, framed, 1st class softwood panelled shutters Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, both faces is covered with commercial type and including S&F 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction with lipping/frame to match complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. complete all as specified.

S&F anodised aluminium Powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified complete as per architectural drawings & specified & directed at site.

S&F anodised aluminium Powder Coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and approved sample

S&F aluminium grill of design No DG-104 7.5mm thick of decogrill or equivelent approved make with 1 mm thick 'F' sections of suitable size all as directed by Engg -in- Charge.

Supplying and fixing aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, etc complete all as specified and directed

S&F 4 levers brass mortice lock, vertical type, size 100 mm complete all as specified.

M&L mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completeall as specified( Fe-410-O or 310-O) complete all as specified and directed. Gde-E-165

S&F butt Hinges, medium weight, stainless steel,100 mm size complete all as specified.

S&F 200 mm long aluminium anodised , barrel tower bolt of extruded section and fixed all as specified and directed.

S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F aluminum handles cast type, anodized of 150 mm size complete all as specified and directed.

Hacking out old broken glass of any thickness and any description from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F 3mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S & F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as directed.

Taking down steel windows/ ventilators and making good & sorting of materials & remove from site complete all as specified.

Supply & Fix Factory made box type steel window with pintle hinges & 02 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded with and including preparation of new steel surfaces and apply two coats of synthetic enamel paint over one shop coat of zinc chromate primer complete all as specified (with or without cooler opening as directed by Engr-in-charge) and (for ref Drg No CEJZ/TD/20 Sheet 1/3 to /3)

Supply & Fix Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded with and including preparation of new steel surfaces and apply two coats of synthetic enamel paint over one shop coat of zinc chromate primer complete all as specified .(with or without cooler opening as directed by engr-in-charge) and (for ref Drg No CEJZ/TD/20 Sheet 1/3 to 3/3)

Supply and fabrication of framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Preparation of new surface of wood and wood based material any description and in any position over 10 cm width or girth and M&L for applying two coats of synthetic enamel paint over a coat pink primer all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces and apply two coats of synthetic enamel paint over a coat of red oxide primer over 10 cm in width or girth of surfaces complete all as specified and directed.

Taking up or down steel tubing and connection of 20 mm bore tube of any description & in any position complete all as specified and directed.

Supply and fixing 20 mm dia (nominal) of CPVC pipes SDR11 & plain CPVC SDR 11 fittings on walls / ceiling or laying in floors thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed

M&L for demoletion of concrete of any description and in any position not otherwise specifically provided for

M&L Rendering 15mm thick cement mortar 1:4 shall be provided mixed with WPC @3% by weight of cement at green concrete complete all as specified & as directed. Note : WPC shall be measured and paid separately.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application over a coat of approved bituminous primer @0.40 liter per Sqm complete all as specified & directed.

M&L for PCC 1:2:4 Type B-1 (using 20mm graded stone aggregate ) average 40mm thick in padding over old cleaned surface of any description on roof / terrace.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.

M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S&F ,Non asbestos fibre cement building boards 6mm thick fixed or laid/ inserted to timber/GI/Aluminium framework with screws all as specified

S&F Hollow PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet/ planks inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified & directed.

Taking down carefully aluminium/copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendent, regulators, sockets, bell push, bell, light fittings etc. removing serviceable materials to store for keeping in safe custody for reuse at site or for taking credit (Credit shall be made as per Schedule of credit), removing rubbish from the site and making good all disturbed surfaces of walls, floors etc. to match to the existing surfaces complete all as specified and as directed.

M&L for point wiring (Modular point wiring if required with modular accessories cover plate etc.) One light/Fan/bell point/Exhaust Fan controlled by one switch one way complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FRLSH cable 1100 volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes,cover plate etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm, single core, PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 Volts grade as earth continuity wire including sunken type pressed steel terminal boxes of suitable size with 3mm thick bakelite sheet white/coloured top cover complete all as specified and as directed by engineer-in-charge.

All as per items srl No 121 above but for One socket out let 5 Amps 5 Pin on same board with other switch.

All as per items srl No 121 above but for One socket out let 5 Amps 5 pin on independent board

All as per item No 121 here in before but with single core multistranded cable of size 4.0 Sqmm for one 15 Amps socket outlet on independent board and multistanded insulated copper earth continuity conductor of size 4.0 Sq mm all as specified and directed by Engr-in-Charge.

Material and labour in replacement for Elect bell AC 230 Volts single phase musical type complete all as specified and as directed.

Material and labour in replacement for bell push flush type 5 Amps .

Supply and fixing in replacement switch piano flush type 5 Amps single pole one way.

Supply and fixing in replacement socket out let 2 in 1 multi pin 5 Amps flush type universal

Supply and fixing in replacement switch piano15/16 Amps one way 240 volts

Supply and fixing in replacement socket outlet in repair 2 in 1, 3 pin, 5 and 15 Amps socket outlet 240 volts.

Supply and fixing in replacement modular switch 6 Amps single module one way.

Supply and fixing in replacement modular socket 6 Amps 5 pin double module.

S&F modular switch 16 Amps single module

Supply and fixing in replacement modular socket 6&16 Amps 5 pin double module.

Supply and fixing in replacement modular Fan step regulator 120W, two module

Supply and fixing in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as reqd complete all as specified and as directed

Supply and fixing in replacement Ceiling rose on PVC FRLS board size 65 X 50 mm three terminal complete all as specified and as directed.

Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal

Switch socket combination 2 in 1, 5 A flush type

Modular Switch socket outlet combination 3 pin 5 amp' flush type

Modular Switch socket outlet combination 3 pin, 15 amp, flush type

Supply and fixing in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB SP 20 Amps B curve type ,230 volts, 10 KA complete all as specified and as directed

Supply and fixing in repair Lamp Holder, PVC FRLS/polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F in replacement of old unsv LED Tube light1 X 20 watt (04 feet), decorative ultra slim type, with integral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed.

S&F in replacement of old unsv LED Tube light1 X 10 watt (02 feet), decorative ultra slim type, with integral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed

S&F in replacement of old unsv LED 15 watt Environmental friendly, ultra modern, energy saving, surface mounted, decorative bulk head LED luminaire comprising of high brightness LEDs, IP54 protection complete all as specified and as directed.

S&F in replacement of old unsv LED Decorative wall light fixture made up of Polycarbonate, suitable for LED Bulb 09/12W(B-22 base) complete all as specified and as directed.

M&L for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 6 Sqmm and one run of 6 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc. complete as directed by Engineer-in-Charge. NOTE: Two runs of cable with one run of earth wire and PVC conduit shall be measured & paid for as one length.

M&L for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 4 Sqmm and one run of 4 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc. complete as directed by Engineer-in-Charge. NOTE: Two runs of cable with one run of earth wire and PVC conduit shall be measured & paid for as one length.

S&F in replacement of old unsv LED Tube light 20 watt batten emergency type with high quality materials polycarbonate and tranlucent serrated milky white diffuser to get glare free, smooth light distribution, thermoplastic aluminium housing enhance safety and luminaire is pre-wired with high effiency electronic driver and LED lamp power backup of 3 to 4 hrs including up with three core flexible copper conductor cable suitable size complete with all accessories and necessary connection complete all as specified and as directed.

S&F in replacement of old unsv LED Tube light 10 watt batten emergency type with high quality materials polycarbonate and tranlucent serrated milky white diffuser to get glare free, smooth light distribution, thermoplastic aluminium housing enhance safety and luminaire is pre-wired with high effiency electronic driver and LED lamp power backup of 3 to 4 hrs including up with three core flexible copper conductor cable suitable size complete with all accessories and necessary connection complete all as specified and as directed.

S&F in replacement of Energy efficient round recessed/surface mounted Spot/focus light not less than 2W LED warm white/red/green/blue down lighter with premium white powder coating and die cast aluminium and making necessary electric connection complete all as specified and as directed by Engineer-in-Charge. Make : Havells/Wipro/Crompton/Philips

Supply, fixing, connecting & testing sheet metal enclosures double door, single pole and neutral, 08 way DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating with IP-42 protection complete including taking down existing all as specified and directed. Note : Rates are deemed to be included for flushing in wall concealed complete making good and matching existing surface. Make:- Legrand /C&S /L&T /INDOASIAN

Supply, fixing, connecting & testing sheet metal enclosures double door, single pole and neutral, 12 way DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating with IP-42 protection complete including taking down existing complete all as specified and as directed. Note : Rates are deemed to be included for flushing in wall concealed complete making good and matching existing surface.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and neutral current carrying capacity 63 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

Chamunda construction company (BID ID -3387203)

D.K.CONSTRUCTION CO (BID ID -3387286)

PANWAR ELECTRICALS (BID ID -3379705)

AMAN ASSOCIATES (BID ID -3387327)

KALWA TRANSPORTER AND SUPPLIERS (BID ID -3376676)

M/S Dharam Chand Lal Chand Jain (BID ID -3379924)