C/o E-Kisan Bhawan at Gohar District Mandi H.P.

Amount

Excavation in foundations, trenches etc., in earth work by mechanical means (Hyraulic excavator)/manual means ,over areas (exceeding 30cm indepth, lift up to 1.50m stacking the excavated soil not more than 3 meters clear from the edge of the excavation and then returning the stacked soil in 15cm.layers,when required in to plinths sides of foundations etc.considering each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 50 meters. PJ -50-50% (7040300 )

All kinds of soil :

Disposal of building rubbish / malba / similar nserviceable, dismantled or waste materials by mechanical means extra lead/Carriage of material by mechanical transport including loading and nloading and stacking up to 3 km lead from the construction site and as per the instruction of Engineer -in charge on site (601010200 )

Filling in plinth depressed portion slab with sand under floors including watering ramming consolidating and dressing complete. (7070000 )

Providing and laying cement concrete 1:3:6 (1Cement:3 sand:6 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work in foundation and plinth (0912010A )

Providing and laying damp proof course 50mm thick with cement concrete 1:2:4 (1 cement :2 sand :4 graded stone aggregate 20mm nominal size) and curing complete. (0928000A )

Applying a coat of hot bitumen (mexphalt 80/100 or equilvant) using 1.70 kg per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil. (9300000 )

Providing and laying cement concrete 1:1.5:3 (1Cement:1.5sand :3 graded stone aggregate 20mm nominal size) & curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation and footing,bases of columns,and the like mass concrete.

For Column footings/Foundation (95201000 )

In Suspended floors,roofs, landing ,shelves and their support balconies,beams,girders,bressumers & cantilever upto floor two levels. (952020000 )

Columns,pillars,post and struts,upto floor two level (9320300 )

Stair cases (Except spiral stair case) including landings but excluding preparing the surface & finishing of the nosing upto floor two level (952030000 )

Providing Tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position and cost of binding wire complete upto floor all level including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in-charge. (9410200 )

Brick work using second class common burnt clay building bricks in foundation in cement mortar 1:6 (one cement : six sand) as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. (10010901 )

Brick work using second class common burnt clay building bricks in super structure above plinth level upto all floor level in cement mortar 1:6 (one cement : six sand) as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. (10020102 )

Half Brick masonry in second class common burnt clay building bricks in super structure above plinth level upto all floor level in cement mortar 1:4 (one cement : four sand) as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. (10050000 )

Providing form work with steel plates 3.15mm thick welded centring,shuttering,strutting and propping etc.with wooden battens and ballies,height of propping and centring below supporting floor to ceiling not exceeding 4m and removal of the same for in situ -reinforced concrete & plain concrete work- verticaal surfaces such as buttresses ,plinth and string courses and the like. (805000000 )

Foundation footings bases of columns etc. and mass concrete including plinth beams and columns up to P.L (805010000 )

Flat surfaces such as soffits of suspended floors,roofs,landings & the like floors etc. above 200mm th. (805020100 )

Beams,cantilevers,girders and lintels,sides and soffits of beams ,beam haunchings,cantilevers,bressumers and lintels not exceeding 1mtrs in depth in all heights from floor to all depth (805060100 )

Columns,pillars and posts struts,square,rectangular or polygonal in plan (805040100 )

Edges of slab and breaks in floor,walls. (805070100 )

Stair case with slopping or stepped soffits excluding Landing (Internal Staircase) (805020100 )

Providing 2nd Second class deodar wood wood work in frames of doors, windows clerestory windows and other frames wrought framed and fixed in position including carriage of materials with in all leads, lifts and other incidentals. (1200104000 )

Providing and fixing 40mm (Forty millimetre) thick second class deodar wood shutters, panelled glazed or panelled and glazed shutters for doors, windows and clerestory windows and including black enamelled iron butt hinges with necessary screws including carriage of materials with in all leads, lifts and other incidentals. (1200503040 )

Providing and fixing 40mm (Forty millimetre) thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56 mm for doors, windows ,clerestory windows including bright finished/black enamelled iron butt hinges with necessary screws including carriage of materials with in all leads, lifts and other incidentals. (1201901040 )

Providing 40x3 mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm 1:3:6 (1 cement :3 sand :6) graded stone aggregate 20mm nominal size). (1207800000 )

Providing and fixing anodized aluminum sliding door bolts anodized colour and shade with bolts and nuts screws etc complete 300x16mm (three hundred into sixteen millimetre) including carriage of materials with in all leads, lifts and other incidentals. (1210401000 )

Providing and fixing anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of materials with in all leads, lifts and other incidentals. (1210503000 )

Providing and fixing aluminum handles anodized transparent or dyed to required colour or shade with necessary screws etc. complete including carriage of materials with in all leads, lifts and other incidentals. (1210601000 )

Providing and fixing 100mm bright finshed brass floor door stopper with rubber cushion screws etc.to suit shutter thickness complete. (1212100000 )

Providing and fixing bright finished black enameled iron helical door spring with necessary screws (1217100000 )

Providing and fixing M.S. grill of required pattern in wooden/steel frames of windows etc. with M.S. flat square or round bars with round headed bolts and nuts or by screws plain grill including carriage of materials with in all leads, lifts and other incidentals. (1207202000 )

Providing and fixing 10mm thick anti skid water proof resistent heavy duty vetrified tiles Nitco or equivalent 600x600mmx10mm manufactured of approved shade and colour in flooring ,treads laid over 12mm thick cement mortar 1:3 (1 cement :3 sand)jointed with cement slurry mixed with pigment to match the shade complete. (13680000 )

White glazed tiles 6mm (Six millimetre)thick in flooring, treads of steps and landing laid on a bed of 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cement upto all floor level including carriage of materials with in all leads, lifts and other incidentals. (13230000 )

Providing and laying granite stone in flooring 20mm (average) thickness base of cement mortar 1:3 (1 cement;3 sand)laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing, of cut edges,opening of required size & shape for wash basin/kitchen sink in kitchen platform,vanity counter and similar location in marble/granite/stone work,including necessary holes for pillar taps etc. complete.20mm thick (13570000 )

Kota stone slab flooring 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 25 mm thick (13540100 )

Kota stone slab 25mm (twenty five millimetre) thick in risers of steps, skirting dado and pillars laid on 12mm (twelve millimetre) (average) thick cement mortar 1:3 (one cement : three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete upto all floor level including carriage of materials with in all leads, lifts and other incidentals. (13550000 )

15mm (Fifteen millimeter) cement plaster in single coat on the rough side of brick/concrete /stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand ) including carriage of materials with in all leads, lifts and other incidentals. (17047040 )

15mm (fifteen millimetre) cement plaster in single coat on the fair side of brick/concrete /stone walls for interior plastering upto floor all level including arises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. (17048040 )

6mm (six millimetre) cement plaster to ceiling in cement mortar 1:3 (one cement : three sand) upto all floor level including carriage of materials with in all leads, lifts and other incidentals. (17044010 )

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting ready mixed paint with wood priming pink of approved brand and manufacture (Nerolac/ Asian Shalimar) conforming to IS: 3536-1966 brushing including carriage of materials with in all leads, lifts and other incidentals. (16036010 )

Painting two coats (excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give an even shade including cleaning of oil, grease, dirt and other foreign matter sand papering and knotting ready mixed paint other than white (Nerolac/ Asian Shalimar) conforming to IS: 3536-1966 including carriage of materials with in all leads, lifts and other incidentals. (16043010 )

Painting two coats (excluding priming cost on new steel and other metal surfaces either enamel paint brushing to give an even shade including cleaning the surface of all dirt ,dust and other foreign matters (16005020 )

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. (16103000000 )

Wall painting (Two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matte and sand papered smooth including applying of putty a required for making the surface including carriage of materials with in all leads, lifts and other incidentals. (17181000 )

Finishing wall with water proofing cement paint of approved brand and manufacture nd of required shade on undercoated wall surfaces (two coats) to give an even shade after throughtly brushing the surface to remove all dirt and remains of loose powdered materails. (16104000000 )

Providing and fixing in position collapsivle steel shutters vertical channels 20 mm x 10mm x 2mm and braced with flat iron 20 mm x 5 mm size with toop and bottom rails of T iron 40 mm x 40 mm x6 mm with 38 mm dia. Steel pulley complete with bolts and nuts locking arrangements, stoppers, handles, including applying a priming coat of red lead paint (1507000000)

Steel work welding in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint.In gratings framed guard bars, ladders, railing, brackets and similar works. (1504040000 )

Providing and fixing M.S.fan clamp type-1 of 16mm dia.M.S bar bent to shape with hooked ends in R.C.C slab during laying including painting the exposed portion of loop ,all as per standard design complete (1520000000 )

Providing and fixing 0.60mm (Zero point sixty millimetre) thick preprinted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyester of 5 (five) microns over 5 (five) microns primer coating including fixing with screws preprinted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia metre with preprinted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. (14550000 )

Providing and fixing M.S. BP sheet 1.66mm (One point sixty six millimetre) to 2mm (Two millimetre) thick in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured and paid for separately) including carriage of materials with in all leads, lifts and other incidentals. (1461000000 )

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately):- (3.25 )

Ordinary closet ((i)

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding ittings:- (3.39 )

Flat back ((a)

630mmx450mm ((i)

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers : (3.34 )

Solid type:

White plastic seat and cover ((a) )

Providing and fixing G.I. Inlet connection for flush pipe with W.C. Pan. (3.33 )

Providing and fixing C.P. Bottle Trap for wash basin and sink. (3.49 )

40mm dia ((I) )

P V C waste pipe flexble coil type length not less than 800mm (10 )

40 mm dia ((ii) )

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor:- (3.2 )

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

Providing and fixing brass bib tap (Superior or heavy type) :- (3.67 )

15mm dia ((a) )

Providing and fixing 15mm (fifteen millimetre) dia C.P. brass stop cock including carriage of materials with in all leads , lifts and other incidentals. (3.69 )

15mm dia ((a) )

Providing and fixing brass full way valve with wheel:- (3.104 )

25 mm nominal bore (( c) )

20 mm nominal bore (( b) )

32 mm nominal bore (( d) )

40 mm nominal bore (( e) )

Providing and laying (to level or slopes) and underground C.I. Inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (1 cement : 5 sand ) C.I. Cover with frame (light duty ) 355mm x 610mm internal dimensions total weight of cover with frame to be not less than 38kg (weight of cover 23 kg. and weight of frame 15kg) R..C.C top slab with 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size ) foundation concrete 1:5:10 (1cement : 5 sand : 10 graded stone aggregate 40mm nominal size) inside plaster 15mm thick with cement mortar 1:3 (1 cement : 3 sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete. (4.41 )

Inside dimensions 455 mm x 610 mm x 450 mm deep single pipe line ((I) )

Inside dimensions 500 mm x 700 mm x 450mm deep for pipe line with one or two inlets. . ((ii) )

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : (4.22 )

150 mm dia. R.C.C. pipe

Providing and fixing stoneware gully trap grade 'A' complete with C.I. grating, C.R. masonry in cement mortar 1:6 chamber and water tight C .I. cover with frame of 300mmx300mm size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.78kg. (4.19B )

Square mouth traps:

150mmx100mm size P or R type ((iii) )

Providing and laying (to level or slopes) and jointing with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) salt glazed stoneware pipes grade 'A' of the following internal diameters including testing of pipes and joints complete: (4.1 )

100 mm diameter ((i) )

Providing and fixing PVC water storage tank of ISI : 12701 marked G.I inlet and outlet connections, 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level : 1000 Ltrs. net cap. (3.114 )

1000 litres net capacity tank ((ii) )

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. (3.149 )

weighing not less than 62 gms

Providing and fixing white glazed fireclay stall urinal with automatic C.I. Flushing cistern (of approved make ) with fittings R.S. or C.I.Brackets standard size C.P. brass flush pipe spreaders with unions and clamps (all in C.P. brass) C.I. Trap with outlet grating and other coupling in C.P. brass including painting of cistern and fittings, cutting and making good the walls and floors where require (3.92 )

Single and stall fixingurinal to wall with ceiling 5 litres and floor C.I. automatic flushing cistern. ((a) )

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete (3.105 )

25 mm nominal bore ((iii) )

Providing and fixing vitreous China pedestal for wash basin or sink complete recessed at the back for reception of pipes and fittings including carriage of materials with in all leads, lifts and other incidentals. (3.4 )

Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass mounted on 6mm (six millimetre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of materials with in all leads , lifts and other incidentals. (3.52 )

Providing and fixing 750 x 20mm (seven hundred fifty into twenty millimetre) C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials with in all leads, lifts and other incidentals. (3.53(i) )

Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials with in all leads, lifts and other incidentals. (3.57 )

Providing and fixing 15mm (fifteen millimetre) dia C.P. brass bib tap with capstan head including carriage of materials with in all leads, lifts and other incidentals. (3.68 I (a) )

Providing and fixing C.P. brass angle valve 15mm without nut and pipe including carriage of materials with in all leads ,lifts and other incidentals. (3.7 )

Providing and fixing G.I./M.I Union of following sizes (where not included in the items) (3.109 )

20mm dia ((b) )

Providing and fixing brass ball valve (horizontal plunger type)- :High pressure with polythene plastic floats (3.105 )

15mm nominal bore ((a) )

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. (3.115 )

110 mm X 90 mm. ((i) )

Providing and fixing 32mm (Thirty two millimeter) dia diametre C.P. brass waste for wash basin or sink of approved brand and manufacture including carriage of materials with in all leads, lifts and other incidentals. (3.46 )

32mm dia ((i) )

KHUB RAM

Abhishek Kashyap