Construction of Central Jail Thavanur Providing Fire Protection System.

Amount

Fire Protection System

od103350/2020_2021 : MOTOR DRIVEN PUMP:-Supply, installation, testing and commissioning of horizontal mounted end suction electric motor driven pump suitable for automatic operation rated for 2280 LPM at 55 MWC high efficiency volute type with cast iron casing bronze impeller, pump coppled to SPDP squirrel cage induction motor 30 KW /40 HP, 415V, Three phase 50 Hz. the pump set is foot mounted type including all accessories such as standared coupling, guard, common base frame pad/foundation bolts etc. complete.

od103352/2020_2021 : DIESEL ENGINE DRIVEN PUMP:- Supply Installation, testing and commissioning of Main Diesel Engine driven pump of centrifugal end suction type suitable for automatic operation rated for 2280 LPM at 60m head at 38HP high efficiency volute type with cast iron casing, Bronze impeller Pump coupled to a diesel engine water cooled with radiator, Complete with auto starting mechanism, 12 Volts/ electric starting equipment , Diesel tank, exhaust pipe extended up to 1.0 m.out side pump house duly insulated with 50 mm. thick glass wool with 1.0 mm. thick aluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required at 1800 RPM including supply of all accessories such as common base plate suitable foundation for engine and pump, vibration damping arrangements, Battery, coolant, lubricating oil, exhaust piping, necessary controls such as pressure switch and interconnecting cable from control panel to Battery etc.

od103356/2020_2021 : Supply,installation,testing and commissioning of Horizontal mounted end suction type electric motor driven two stage Jockey pump 180 LPM at 55 MWC h with cast iron casing bronze impeller,including all accessories operating on Three phase 50Hz,415V AC supply including foundation,bolts etc.complete. The pump set shall be of 3.73KW / 5 HP

od182136/2019_2020 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 100mm dia

od182137/2019_2020 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 80mm dia

od182138/2019_2020 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 25mm dia

od182139/2019_2020 : Supply and providing fire brigade inlet 63mm dia 4 way as required

od182140/2019_2020 : Supply and providing pressure gauge in the existing system as required

od182141/2019_2020 : Supply and providing pressure switch wityh IP 32 enclosure protection phosphor bronze bellows as sensing element etc complete

od182142/2019_2020 : SITC of Butterfly valve 80mm dia

od182143/2019_2020 : SITC of Butterfly valve 100mm dia

od103441/2020_2021 : Supplying , fixing, testing and commissioning of 25mm size Ball valve bronze/ Gun metal seat duly ISI marked complete conforming to IS as required.

od182144/2019_2020 : SITC of Non return valve 80mm dia

od182147/2019_2020 : SITC of Non return valve 100mm dia

od182148/2019_2020 : SITC of Hose 15mt long 63mm dia rubber lined woven jacket

od182149/2019_2020 : SITC of Hose reel conforming to IS 884 30mt long 20m internal dia

od182150/2019_2020 : SITC of Hose cabinet Double

od182151/2019_2020 : SITC of Branch Pipe 63mm dia

od182152/2019_2020 : SITC of Hydrant valve single with stainless steel coupling 63mm dia conforming to IS5290 with cap and chain as required

od103470/2020_2021 : Supply,installing,testing and commissioning or Air cusion vessel made of mild steel of 250mm dia with automatic air release cock,25mm dia drain valve and shutt off. The vessel shall be 120 cm in height etc.complete

od103472/2020_2021 : Supply, installation, testing and commissioning of 20mm dia Gun metal Air Release valve

od182153/2019_2020 : FIRE ALARM PANEL:- Supply, installation, testing and commissioning of Control Panel of 16 Zone complete with charger, rectifier, alarm display with all other necessary attachments with Battery

od103731/2020_2021 : FIRE ALARM PANEL:- Supply, installation, testing and commissioning of Control Panel of 4 Zone complete with charger, rectifier, alarm display with all other necessary attachments with Battery

od182154/2019_2020 : Supply and providing Hooter for audio alarm as required

od182155/2019_2020 : Supply and providing manual Call point break glass type with hammer and chain as required

od103497/2020_2021 : Supplying, installing, testing and commissioning of optical type smoke detectors with solid stage design, indicating lamp, mounting base etc

od103499/2020_2021 : Supply, laying and clamping of 2 core 1.5 sq mm PVC insulated and PVC sheathed armoured copper cable, using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

od103501/2020_2021 : Supply, erection, testing and commissioning of Talk back field device .

od103503/2020_2021 : Supply, erection, testing and commissioning of 6 Watt Wall mounted type Speaker for PA System.

od103505/2020_2021 : Supply & erecion of MICROPHONE for Intelligible, crisp and bright sound suitable for all type of PA applications. Supplied with quick detachable holder with 3-pin professional XLR connector & 6 mtrs. Twin core shielded low noise cable.

od103507/2020_2021 : Supply, Installation, Testing and Commissioning of solid state Amplifier of 60W RMS out put in rack, including necessory control wires, jacks etc. complete as required

od182156/2019_2020 : Supply and providing Fire Escape Route size not less than 16'x16' as required

od182157/2019_2020 : Supply and providing Assembly point boards of 3mm PVC foam board size not less than 16'x16' as required

od182158/2019_2020 : Supply and providing Glow SIgn boards of 3mm PVC foam board size not less than 12'x4' as required

od182160/2019_2020 : Supply and providing DCP type fire extinguisher 5kg capacity with installation brackets conforming to IS 15222 as required

od182161/2019_2020 : Supply and providing ABC type fire extinguisher 5kg capacity with installation brackets conforming to IS 15222 as required

od182163/2019_2020 : Suply and providing emergency fire escape lighting system consisting 2 nos lamp ,7 AH FMF battary charging unit ,exit sign display etc in MS enclosure

90.14.1.2 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.2.1 : Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.2 : Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet

90.14.6 : Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7 : Supply and providing copper earth bus in the panel board

90.14.4 : Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.5 : Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

od103515/2020_2021 : S & F Motor starters of the following ratings Three phase forward reverse DOL starters for 0.25HP to 7.5 HP motor

od103517/2020_2021 : Supply, conveyance and fixing the following types & current rated control gears & switch gears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required. DOL Starter for 50 HP motor

od103519/2020_2021 : S & F switch disconnector unit (isolator) complete with handle assembly, door inter lock and padlocking arrangement of the following ratings: 63 A, TPN AC 23 A duty

od103521/2020_2021 : S & F switch disconnector unit (isolator) complete with handle assembly, door inter lock and padlocking arrangement of the following ratings: 100/125 A, TPN AC 23 A duty

od103525/2020_2021 : Suply & fixing the following digital meters in the panel assembly Three phase volt meter (V - RY, YB, BR, R, Y, B) of accuracy class

od103527/2020_2021 : Suply & fixing the LED indicators for all voltage ranges - Red, Green, Yellow or Blue Colour

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

od103535/2020_2021 : Supply and wiring with PVC insulated stranded single core copper conductor cables for interconnecting the control devices/ equipments including the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required. 25.00Sqmm single run

od103537/2020_2021 : Supply and wiring with PVC insulated stranded single core copper conductor cables for interconnecting the control devices/ equipments including the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required. 6.00Sqmm single run

od103539/2020_2021 : Supply and wiring with PVC insulated stranded single core copper conductor cables for interconnecting the control devices/ equipments including the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required. 1.5Sqmm single run

90.12.7.14 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 10 sq mm with factory made clamp

90.12.7.18 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 50 sq mm with factory made clamp

9.1.7 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 10 sq. mm (22mm)

9.1.11 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 50 sq. mm (32mm)

90.16.1.4 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)

90.16.1.5 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.75 mm copper conductor (6 SWG)

90.16.5.4 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG)

90.16.5.5 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.75 mm (6 SWG)

od103529/2020_2021 : Painting letters or figures with enamel paint as identification mark to SB, DB, panel board etc as required

od112562/2020_2021 : Preparation of electrical /fire drawings in A3 sheet as per requirements in electrical inspectorate/ fire department approvals-First copy

od112564/2020_2021 : Preparation of electrical /fire drawings in A3 sheet as per requirements in electrical inspectorate / fire department approvals-Additional sheet copy

Able Enterprises

Bidder Name

Able Enterprises

RAYAN FIRE PROTECTION SYSTEMS