Const. of Hockey Astroturf and Athletic track in Modern Sports Complex, Baragarh Distt. Ambala (Pdg. Solar Power Plant and Solar water heating system with allied items).

[22.86.3]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 3. 25 mm nominal outer dia Pipes [Through Rate]

[23.22.5.8]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.8. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCBs FOUR POLE [Through Rate]

[24.14.46]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 46. 50 Sq mm 3.5core (Arm.) [Through Rate]

[24.5.2.3]MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia [Through Rate]

[32.70.3]Supply Installation testing commissioning of Solar Photovoltaic grid connected roof top Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- (a) Solar Photovoltaic Module manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. (b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz plus /- 2.5 Hz, output voltage suitable to generate AC (c) Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degrees C. The PCU shall adjust the voltage and frequency level to suit grid frequency (d) Data Monitoring System complete with accessories. (e) Fixing of Array junction box and Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. (f) Lightning and surge voltage protection. (g) Connections and Interconnections by supplying and fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying and fixing of necessary channel/conduit lugs and other accessories etc. as required. 3. Above 100 kWp and up to 500 Kwp [Through Rate]

Fixing of electric heater with thermostate 5 Kw including all labour and petty material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of work.

Supply and erection of NRB 32mm. Make:- complete all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works.Make:- Jindal / Tata/ Ravindra

SITC of solar water heating system of 1000 LPD capacity in FPC (Presser modal) with hot water storage tank made of ss 304L grade sheet, thickness 2.5mm with stand of C channel and piping GI duly insulated with rock wool 50mmand cladding as per MNRE guidelines and ISO Certified (SITC of Flat plate Solar collector panels of size 2000mm x 1000mm x 100mm (or as per manufacturer`s standard) with extruded Aluminium frame, glazing 3.2 mm thick toughened and textured glass back sheet of aluminium 25mm rockwool insulation at sides and 50mm rockwool/ pendulation at bottom of 48 kg/cum density and K value between 0.028 to 0.033 W/mK Absorber will be of Cu (copper) tubes type, of 2sqm area, having lazer /ultrasonic welded tube and fins arrangement, with Copper Tube Headers of dia 25.4 mm (approx) and 127 mm dia for riser tube with nos of riser tubes and absorber coating suitably selected Coating Absorptivity should be )90% and Coating Emissivity should be (20% with with brass flanges and EPDM rubber gaskets. The Collectors shall be placed with stands of size 32x 32 x 3mm thick Angles duly coated with included Civil work with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works) Make: Green Energy/ Radiant/Inter Solar

SITC of cold water storage tank of 1000 LPD in Four layer with stand with complete with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works) Make :- Syntex/ Ganga/ Jindal..

SITC of Booster Motor 1 HP complete all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. Make :- Kirloskar/ Crompton/ CRI...