Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹12.8 Cr
EMD Value
₹12.8 L
Closing Date
3 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer, Panchayat (R&B) Division, Tapi
Construction of High Level Major Bridge on Amaniya Ambapani Road Ch. 4+000 to 4+200, Under MMGSY 2025-26, Ta.Dolvan, Dist. Tapi
364919
22 OF 2026-27
Open
Civil Works - Bridges
Works
Tapi
17 documents required · 17 mandatory
₹18,000
Executive Engineer, Panchayat (R&B) Division, Tapi-Vyara
₹12.8 L
7 Nov 2026
7 Nov 2026
7 Nov 2026
3 Dec 2026
7 Nov 2026
90 days
Name of Work :- Construction of High Level Major Bridge on Amaniya Ambapani Road Ch.
4+000 to 4+200, Under MMGSY 2025-26, Ta. Dolvan, Dist. Tapi
BILL OF QUANTITIES
Item Description of Item (with brief specification and reference to book of
Quantity Unit Rate Amount
No. specifications)
1 Diversion of watercourse / providing cofferdam and bund or island as
may be necessary for foundation and maintaining the same for the 10.00 Each 185234.00
period as may be necessary.
2 Marking out center line of the bridge and various other component
structure and complete lineing out and leveling with total station,
theodolite ,levels ,including constructing necessary pillars for lines level
and establishing necessary bench mark etc. Complete as directed.
3 Providing flood gauge marks on substructure as per design including
painting complete.
4 Providing masonry steps with cement pointing on approaches as
5 Filling available excavated earth/wethered rock in trenches,sides of
foundations etc. in layers not exceeding 20 cm in depth consolidating 2980.00 Cu.m. 133.65
each disposited layer by ramming and watering.
6 Excavation for foundation in hard murrum and boulders and very stiff
or sticky, clays and other similar strata including shoring and strutting
and dewatering as necessary and disposing of the excavated stuff as
7 Excavation in large boulders and soft rock by welding including shoring,
strutting and dewatering as necessary and disposing of the excavated 1001.00 Cu.m. 719.06
stuff as directed.
8 Excavation in hard rock by dry-wet blasting and chiselling including
dewatering preparing foundation base by proper benching and
stepping and disposing of the excavated stuff as
directed.(B) prohibited Blasting. work.
9 Providing & filling in foundation as base course with ordinary cement
concrete of M 15 mix and providing necessary vertical pin headers 1859.00 Cu.m. 3697.61
including formwork vibrating ramming & curing complete.
10 Providing and casting in-situ controlled cement concrete of M 35 For
R.C.C. work for footing including water reducing concrete admixture @
150ml/bag of cement necessary form work vibrating, curing and
finishing complete.
11 Providing and fixing in postion TMT Fe 550D Corrosion Resistant Steel
(CRS) bars of various diameter for all RCC works in piles, pile caps and
foundation as per detailed design & drawing and schedule including
cutting, bending, hooking the bars, binding with 18 SWG GI wires or
tack welding (Only for piles) and supporting as required with all lifts etc. 106.00 MT. 77515.66
complete including cost of all labour, materials, tools, plants,
equipment etc. all complete as directed by engineer and as per
specification. for R.C.C. Raft complete as per detailed drawing and
12 Drilling with core cutting machine / Drilling machine plus cleaning &
fixing, 32mm Anchor Bar using Chemical per anchor including all the
arrangements and measures for installing Anchor bar safely at site as 358.00 Nos 1964.45
per details specified in the drawing .
13 Providing and casting in situ controlled cement with of M35 for R.C.C.
work in piers and abutment as per drawing including water reducing
concrete admixture @ 150ml/bag of cement, centering shuttering 490.00 Cu.m. 5710.54
scaffolding where necessary laying vibrating curing and finishing
complete. (A) Height from 0.0 M to 5.0 M
14 Providing and casting in situ controlled cement with of M35 for R.C.C.
work in piers and abutment as per drawing including water reducing
concrete admixture @ 150ml/bag of cement, centering shuttering 386.00 Cu.m. 6035.76
scaffolding where necessary laying vibrating curing and finishing
complete. (B) Height from 5.0 M to 10.0 M
15 Providing and casting in situ controlled cement with of M35 for R.C.C.
work in piers and abutment as per drawing including water reducing
concrete admixture @ 150ml/bag of cement, centering shuttering 40.57 Cu.m. 6846.79
scaffolding where necessary laying vibrating curing and finishing
complete. (C) Above 10.0 M
16 Providing and casting in situ controlled cement concrete of M 35 Mix
for R.C.C. works in pier cap abutment cap and dirt wall including
controlled cement concrete M 40 bed block or pedestals of required
drawings, water reducing concrete admixture @ 150ml/bag of cement,
centering shuttering, scaffolding wherever necessary laying vibrating
curing and finishing complete.
17 Providing and fixing in postion TMT Fe 550D Corrosion Resistant Steel
(CRS) bars of various diameter for all RCC works in piles, pile caps and
foundation as per detailed design & drawing and schedule including
cutting, bending, hooking the bars, binding with 18 SWG GI wires or
tack welding (Only for piles) and supporting as required with all lifts etc. 216.20 M.T. 77515.66
complete including cost of all labour, materials, tools, plants,
equipment etc. all complete as directed by engineer and as per
specification. For pier,Abutments,Aburment cap , pier cap , sesmic
arrester, Pedestal.
18 Providing and casting in situ controlled cement concrete M-35 for
R.C.C. work in superstructure including including water reducing
concrete admixture @ 150ml/bag of cement centering,ramming 1575.00 Cu.m 6386.23
vibrating curing and finishing complete.(A)T-Beam and Deck slab type
of superstructure (I) Deck slab
19 Providing and fixing in postion TMT Fe 550D Corrosion Resistant Steel
(CRS) bars of various diameter for all RCC works in piles, pile caps and
foundation as per detailed design & drawing and schedule including
cutting, bending, hooking the bars, binding with 18 SWG GI wires or
tack welding (Only for piles) and supporting as required with all lifts etc.
complete including cost of all labour, materials, tools, plants,
equipment etc. all complete as directed by engineer and as per
specification. (A) Slab.
20 Providing and fixing in position fully moulded restrained elastometric
Bearings as per detailed drawings 1209600.00 Cu.cm 0.90
21 Providing & Casting in situ controlled cement concrete M-400 mix with
trimix C.C. Road laid as directed including water reducing concrete
admixture @ 150ml/bag of cement, temping, vibrating, finishing, 200.00 Cu.m. 6522.58
curing and filling joint with bitumen etc as Directed and aprroved by
engineer in charge.
22 Type - B, "THRIE" : Metal Beam Crash Barrier (Providing and erecting a
"Thrie" metal beam crash barrier comprising of 3 mm thick corrugated
sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC
series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to
centre, 2 m high with 1.15 m below ground level, all steel parts and 380.00 Rmt 4174.33
fitments to be galvanised by hot dip process, all fittings to conform to
IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post
with a space of channel section 150 x 75 x 5 mm, 546 mm long
complete as per clause 811)
23 Providing PVC 100 mm. diameter water spouts including necessary iron
gratings as per drawings.
24 Providing and fixing marble slab including engraving and painting
25 Providing and casting in situ controlled cement concrete of M 35 for
approach slab including water reducing concrete admixture @ 44.00 Cu.m. 5643.88
150ml/bag of cement, form work curing and finishing complete.
26 Providing and fixing in position FE 550D TMT bar reinforement
including cutting, bending and tying complete as per detailed drawings.
(A) R.C.C. Kerb. (B) R.C.C. Footpath.(C) R.C.C. Approch slab.(D) Wearing
27 Providing and fixing premoulded compressible filler board in black
colour confirming to MoRT&H Specifications (Clause 1015), having
minimum density 95kg/cum. non-staining with less than 1% water
absorption & compression recovery of 93% minimum as per
specification for 20 mm wide expansion joint including cutting to
required size and shape at all levels etc.complete as directed.
28 Providing & laying weep hole in Abutments, and returns by using
A.C./PVC pipe of 100mm including laying in proper grade and jointing 1448.00 Each 87.07
the completed as per detailed specification.
29 Providing and laying - Fitter Media 600mm thick directed at the back of
abutments, returns and wing walls as per detailed specifications. 1577.00 Sqm 1279.96
30 Providing and laying of Extruded Bioaxial Polypropylene Geogrid 40 KN
as per clause no 3102.8 and approval design and specification with
accesories like tie strips,nuts & bolts and loops/lugs for joining 1037.00 Sqm 657.21
reinforcing elements with the facia ,pannels and overlaps and other
protective elements as per detailed specification.
31 Providing and laying Pitching on slopes laid over prepared filter media
including boulder apron laid dry in front of toe of embankment 465.00 Cu.m. 1051.41
complete as per drawing and Technical specifications
32 Providing and laying Filter material underneath Pitching in slopes
complete as per drawing and Technical specifications
33 Providing and constructing RCC Inspection Gallery/Walkway for bridge
inspection and maintenance, including necessary RCC slab, supporting
brackets/beams, reinforcement steel, formwork, proper connection
with the bridge structure, and providing suitable access arrangements, 11.00 Nos 366441.65
complete as per approved drawings and specifications. The work shall
include all materials, labour, machinery, scaffolding, curing, finishing,
and all incidental works required for complete execution.
34 Providing and fixing Helical pipes in voided concrete slabs 1022.00 Rmt 2984.55
35 Steel work, welded in built up sections framed work including cutting,
hoisting, fixing in position and applying a priming coat of red lead paint.
(A)In beams and joists, channels angles Tees, flats, with connecting 257.00 Q 9108.48
plates or angle cleats as in main and cross beams. Hip and jack rafters,
purlins conneted to common rafters and the like
36 Construction of RCC railing of M30 Grade in-situ with 20 mm nominal
size aggregate, true to line and grade, tolurence of vertical RCC post
not to exceed 1 in 500, centre to centre spacing between vertical post
not to exceed 2000 mm, leaving adequate space between vertical post
for expansion, complete as per approved drawings and technical
37 Clearing and grubbing road land including uprooting rank vegetation
grass bushes , shrubs , saplings and trees girth upto 300mm removal of
stumps of trees cut earlier and disposal of unserviceable materials ( C) 1.00 Ha. 28455.09
By mechanical means in area of light jungle
38 Box cutting the road surface to proper slope and camber for making a
base for road work including removing the excavated stuff and 670.00 Cumt 106.65
depositing on the road side slope as directed upto 50Mt.lead.
39 Earthwork for embankment including breaking clods, dressing with all
lead and lift and including watering rolling and consolidation of
subgrade in layers at O.M.C. to required dry density including filling the 7560.00 Cumt 187.09
depression which occur during the process using power roller 8T to
10T.(E) From Borrow area with all lead
40 Construction of 100 mm thick compacted GRANULAR SUB BASE (
Grade-I , Crushed B T materials of 53 mm to 9.5 mm @ 50 %, 9.5 mm
to 2.36 mm @ 20 %, Below 2.36 mm @ 30 % ) by providing close
graded matrial , mixing in a machanical mix plant at OMC, carriage of a 210.00 Cumt 1181.21
mix material to work site, spreading uniform layers with motor grader
on prepared surface and compacting with vibratory power roller to
achieve desire density , complete clause as per
41 Construction of 100 mm thick compacted granular sub base ( Grade-V
Crushed B T materials of 53mm to 26.5 mm @ 35 %, 26.5 mm to
mm @ 50 %, Below 2.36 mm @ 15 % ) by providing close graded
matrial , mixing in a machanical mix plant at OMC, carriage of a mix 150.00 Cumt 1108.08
material to work site, spreading uniform layers with motor grader on
prepared surface and compacting with vibratory power roller to
achieve desire density , complete clause as per
42 Providing and laying 250 mm thick Wet Mix Macadam (W.M.M.) (Two
layers each of 125 mm) using machine crushed black trap aggregate of
40 to 50 mm size in the material as per MORT & H specification
including premixing the material with water at OMC in mechanical mix 370.00 Cumt 1130.35
plant, carriage of mixed material by tippers to site, laying in uniform
layers with paver in sub base / base course on well prepared surface
and compacting with vibratory roller to achieve the desired density.
43 Providing & Laying bituminous prime coat asphalt @ 7.5 kg / 10 sqm.
of slow curing emulsion as per MOST specifications including cost of 1450.00 Sqmt 96.96
materials labours labour equipment etc. complete.
44 Providing and laying 50 mm thick Bituminous Macadam with B.T.
aggregate as per MORTH specification and using bitumen emulsion RS-
1 as per IS 8887: for tack coat @ 2.50 KG. / 10 Sq.m. on B T Surface
with mechanical sprayer and Bulk asphalt VG-30 for mixing @
KG. / M.T. i.e. 3.40 % of total weight of mix including heating and
mixing the aggregate and asphalt in continuous of drum mix plant and
hot laid process spreading the same by paver finisher and consolidation
with roller as per MORTH specification to achieve desire density,
including providing all materials equipments, tools and plants, fire
wood, oil, kerosene, labour charges etc. complete using contractor's
own machinery drum mix plant and paver finisher etc. complete.
45 Providing and laying 25 mm thick Semi Dense Bituminous Concrete
with B.T. aggregate as per MORTH gradation asphalt grade VG-30 for
mixin @ 50Kg/MT including heating and mixing the aggreagate and
asphalt by continuous of batch mix plant(or Drum Mix plant) and hot
laid process laying with paver finisher and consolidation with roller as 90.00 MT 4919.71
per MORTH specificatin to achieve desire density, including cost all
materials , equipments, tools and plants, oil, kerosene, firewood,
labour charges etc. complete using contractor's own machineries batch
mix plant(or Drum Mix plant) and paver finisher etc. complete.
46 Providing and laying 100 mm thick specified quarry spall in side
shoulders including carriage of materials spreading in live and level and 20.00 Cumt 825.17
47 Road marking with hot applied thermo plastic paints with reflectorising
glass beads on bitumin surface providing and laying a hot applied
thermoplastic compound 2.5 mm thick includlng reflectorsing glass
beads@ 250 gms per sqm area, thickness of 2.5mm is excluding of
surface applied glass beds as per IRC-35 2015. The finished surface to
be level,uniform and free from sreaks and holes. zebra patta/bump
patta lane/center line/edge line/cut patta. The white color marking 126.70 Sq.m 367.73
should provide liminance coefficent on cement road shall be min
130mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during
the service life during the day time. The marking should meet the
performance criteria for night time reflectivity,wet reflectivity and skid
resistnce as mentioned in the section 15 of IRC35-2015. warrenty for
retro reflectivity shall be two years
48 Direction (Junction) Sign :-Providing and fixing sign boards made out of
2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size
244x122 cms. rectangular as per design of IRC-67-2012. Pre treated
with phospheting process & acid etching; coated with one coat of
epoxy primer and two coats of best quality epoxy paint ;reflectorised
with Micro Prismatic Grade retro refiectivesheeting of Type-11 as per
ASTM D-4956 and latest M.O.S.T.Specifications; 4.0mtr long (2 Nos.)
stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and
frame fabricated from suitable size iron angle of 50 x 50 x 5mm;
painted with bestquality epoxy coatings in black and white bends. The 1.00 Each 26572.09
details of symbol foreach board shall be as per theinstruction of
engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size
x 45 x 60 Cms. for each leg.including excavation, curing etc.complete
under the supervision of engineer in charge. A warranty for 10 years
for the Retro reflective sheeting from original manufacturer & a
certified copy of 3 year outdoor exposure test report from third party
test lab for the product offered shall be submitted by contractor. (A)
Class-C Type-11 Retro Reflective sheeting
49 Cautionary Warning Sign :-Providing and fixing sign boards made out of
2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size
90 x 90 x 90 cms. equilateral triangle as per design of IRC-67-2012. Pre
treated with phospheting process & acid etching; coated with one coat
of epoxy primer and two coats of best quality epoxy paint ;reflectorised
with Micro Prismatic Grade retro refiectivesheeting of Type-11 as per
ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long stand post
of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame
fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with
bestquality epoxy coatings in black and white bends. The details of 2.00 Each 5077.27
symbol foreach board shall be as per theinstruction of engineer in
charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x
Cms. for each leg.including excavation, curing etc.complete under the
supervision of engineer in charge. A warranty for 10 years for the Retro
reflective sheeting from original manufacturer & a certified copy of
year outdoor exposure test report from third party test lab for the
product offered shall be submitted by contractor. (A) Class-C Type-11
Retro Reflective sheeting
50 Facility Informatory Sign :-Providing and fixing sign boards made out of
2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size
80 x 60 cms rectangular as per design of IRC-67-2012. Pre treated with
phospheting process & acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint ;reflectorised with
Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM
D-4956 and latest M.O.S.T.Specifications; 3.6mtr long stand post of
x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated
from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality
epoxy coatings in black and white bends. The details of symbol foreach 2.00 Each 5906.48
board shall be as per theinstruction of engineer in charge. The fixing at
site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each
leg.including excavation, curing etc.complete under the supervision of
engineer in charge. A warranty for 10 years for the Retro reflective
sheeting from original manufacturer & a certified copy of 3 year
outdoor exposure test report from third party test lab for the product
offered shall be submitted by contractor. (A) Class-C Type-11 Retro
Reflective sheeting
51 Hazard Marker Sign :-Providing and fixing sign boards made out of
mm aluminium sheet / 4 mm ACP (Aluminum composite Panel); size
90x30 cms. rectangular as per design of IRC-67-2012. Pre treated with
phospheting process & acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint ;reflectorised with
Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM
D-4956 and latest M.O.S.T.Specifications; 1.8mtr long stand post of
x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated
from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality
epoxy coatings in black and white bends. The details of symbol foreach 2.00 Each 3666.30
board shall be as per theinstruction of engineer in charge. The fixing at
site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each
leg.including excavation, curing etc.complete under the supervision of
engineer in charge. A warranty for 10 years for the Retro reflective
sheeting from original manufacturer & a certified copy of 3 year
outdoor exposure test report from third party test lab for the product
offered shall be submitted by contractor. (A) Class-C Type-11 Retro
Reflective sheeting
52 Regulatory / Mandatory Sign :-Providing and fixing sign boards made
out of 2mm aluminium sheet / 4mm ACP (Aluminum composite Panel);
size 60 cms Dia Circle as per design of IRC-67-2012. Pre treated with
phospheting process & acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint ;reflectorised with
Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM
D-4956 and latest M.O.S.T.Specifications; 3.6mtr long stand post of
x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated
from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality
epoxy coatings in black and white bends. The details of symbol foreach 2.00 No 4618.73
board shall be as per theinstruction of engineer in charge. The fixing at
site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each
leg.including excavation, curing etc.complete under the supervision of
engineer in charge. A warranty for 10 years for the Retro reflective
sheeting from original manufacturer & a certified copy of 3 year
outdoor exposure test report from third party test lab for the product
offered shall be submitted by contractor. (A) Class-C Type-11 Retro
Reflective sheeting
53 Chevron sign :-Providing and fixing sign boards made out of 1.5mm
aluminium sheet / 3mm ACP (Aluminum composite Panel); size 60x50
cm as per design of IRC-67-2012. Pre treated with phospheting process
& acid etching; coated with one coat of epoxy primer and two coats of
best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per ASTM D-4956 and latest
M.O.S.T.Specifications; 3.3 mtr long stand post of 75 x 75 x 6mm /
65NB Circular MS Pipe as required and frame fabricated from suitable
size iron angle of 50 x 50 x 5mm; painted with bestquality epoxy
coatings in black and white bends. the details of symbol or inscription / 5.00 No 4681.35
numerals for each board shall be as per the instruction of engineer in
charge.The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x
Cms. for each leg.including excavation, curing etc.complete under the
supervision of engineer in charge. A warranty for 10 years for the Retro
reflective sheeting from originaa manufacturer & a certified copy of
year outdoor exposure test report from third party test lab for the
product offered shall be submitted by contractor. (A) Class-C Type-11
Retro Reflective sheeting
54 Providing and fixing hectometer as per I.R.C. type design including
painting lettering etc. complete fixing in C.C. 1:5:10. 1.00 Each 356.50
55 Providing and erecting a 'W' metal double beam crash barrier
comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm
above road/ground level, fixed on ISMC series channel vertical post,
150 x 75 x 5 mm spaced 2 m center to center, 1.8 m high, 1.1 m below
ground/road level, all steel parts and fitments to be galvanised by hot 160.00 Rmt 3678.42
dip process, all fittings to confirm to IS:1367 and IS:1364, metal beam
rail to be fixed on the vertical post with a spacer of channel section
x 75 x 5 mm, 330 mm long complete as per clause
56 Cat Eye/ Road Stud / RPM: Supplying Raised Pavement Markers made
of polycarbonate and ABS moulded body and reflective panles with
micro prismatic lens (No Glass lens) capable of providing total internal
reflection of light entering the lens face and shall support a load of
13635 kgs. tested in accordance to ASTM D 4280 Type H and
Complyinh to Specification of Category A of MORTH Circular No
RW/NH/33023/10-97 -Do III Dt 11.06. 1997. The height, width and
length shall not exceed 20mm, 130 mm and 130mm and with minimum 127.00 Each 217.41
reflective area of 13 sqcm on each side and the slope to the base shall
be 35+/-5 degrre. The body of the marker should having finger grip for
easy and accurate placement and application with epoxy/ bituminous
Adhesive as recommended by the manufacturer of the marker. The
color of the marker should be as per the IRC 35-2015 and as directed
by Engineer-in-charge
57 Providing and casting in situ controlled cement with of M35 for R.C.C.
work in Retaining wall as per drawing including centering shuttering
scaffolding where necessary laying vibrating curing and finishing 1335.00 Cumt 5548.88
complete. 1.) 0 to 5 m
58 Providing and casting in situ controlled cement with of M35 for R.C.C.
work in Retaining wall as per drawing including centering shuttering
scaffolding where necessary laying vibrating curing and finishing 281.00 Cumt 5874.15
complete. 2.) 5 to 10 m
59 Providing and placing in position FE 500D bar reinforcement for
following items including cutting bending hooking and tying complete
as per detailed drawing for the following (A) Piers (B) Abutments (C) 123.60 MT 73858.69
60 Excavation for foundation upto all depth including sorting out and
stacking of useful materials and disposing of the excavated stuff upto 238.00 Cumt 254.36
all lead (A) Dense and Hard soil
61 providing and filling in foundation with ordinary cement concrete M-
100 mix and providing necessary vertical pin headers including form 25.00 Cumt 3326.71
work ,vibrating , ramming and curing complete . (More than 10 ton)
In Words: Rupees Twelve Crore Eighty Lakh Seventy-Four Thousand Three Hundred Eleven and Seventy-Seven Paise Only.
I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated
rate mentioned above. Amount of my /our tender works out as under.
* Estimated Amount * Estimated Amount
put to tender put to tender
Deduct :…………% Below Add :………%Above
In Words …………………………………… In Words………………………………
* (Please strike out whichever is not applicable).
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge
for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills
4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement
Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix
design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input
rate mentioned in all the tender.
5 The amount of dismentalled credit materials at Rs. 0 shall be deducted from first R.A. Bill.
6 The Contractor will have to submit the mix design for different grades of Cement Concrete & Asphalt at his own cost before
execution as directed and to be approved from the engineer in charge.
Dy. Executive Engineer Executive Engineer
Panchayat (R&B) Sub-Division Panchayt (R&B) Division
Divisional Account officer
Panchayt (R&B) Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
0 CHECKLIST.pdf
1 Vol 1 SBD Book Amaniya to Ambapani Bridge.pdf
2 BOQ Amaniya to Ambapani Bridge.pdf
3 VOL 2 Specification index.pdf
PQ.pdf
4. Drawing.pdf
GR all SBd with Index-1.pdf
GR all SBd with Index-2.pdf
GR all SBd with Index-3.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .