AS AS TO BUILDING NO P17 OFFICE COMPLEX AT FMU PROVN OF BASKET BALL COURT AT TS DOLPHIN HILL AS AS TO CHAIN LINK FENCING AND GATE OF BLO COMPLEX P54 AT NAVAL DOCKYARD DEMOLITION AND RECONSTRUCTION OF BOUNDARY WALL OF C SECTOR AT DOLPHIN H

Amount

Excavating over areas not exceeding 1.5m deep and getting out in hard / dense soil complete all as specified and as directed.

M & L for hard core of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded aggregate as in subbase of flooring / hard standing complete all as specified and as directed.

M&L for 100mm thick PCC (1:2:4) type B-1, using 20mm graded stone aggregates as in base floor for basket ball court and finishing the surface even and smooth using extra cement complete all as specified and as directed.

Excavating in post holes (or similar holes) each n. exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard / dense soil complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2, using 40mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified and as directed.

Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L for Marking Strips, Lines, Dashes, Arrows etc of 2.5 mm thick and not exceeding 10cm wide of white colour on basket ball court as per the standard measurements of the court with Hot Thermo Plast material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater, driven by skilled operator on surface of court including cleaning the concrete surface complete all as specified and as directed.

M&L for providing and installation of Basketball Square pipe 5'' vertical section with base plate of 1' x 1' of 12mm thick with 4'' arm extension 1.2mtr in 5mm thick with female socket of 3' with base plate of 1'x1' of 12mm back board of 20mm rtansperate poly acrylic board with MS frame with Dunken Ring with Nylon Net complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc., and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish to out side MD land complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in hard/ dense soil complete all as specified and as directed.

M&L for providing Plain Cement concrete Type D-2 1:4:8 (using 40mm graded granite stone aggregates) as in foundations, filling and mass-concrete complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for Providing Cement Concrete Type B1 1:2:4 using 20mm graded aggregates in lintels upto 1.5m clear span, cills, steps; eismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 4028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Material and Labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished fair and even with out using extra cement complete all as specified and as directed.

M&L for preparation of new wall surfaces and applying three coats of cement base paint over a coat of primer complete all as specified and as directed. Make : Super-Snocem / Durocem / Aquacem

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

All as per item No. 18 above but mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M&L for Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, straining rods,complete all as specified and as directed

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed

Removing building materials etc (other than spoil) to out of MD land including loading and unloading at the destination complete all as specified and as directed. Note : One metric tonne shall mean ‘one load’ as given on Sl page No. 462 of SSR Part II [2010]

M&L for forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ for 150mm thick concrete slab complete all as specified and as directed.

M&L for providing Reinforced Cement Concrete type B-1, 1:2:4 (using 20 mm graded aggregate) as in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n. exc. 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and as directed.

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Supply of Chain link MS galvanisd fencing, any size or type made of 4mm dia wire and including pvc coating of 1.3mm rhickness as approved by the Garrison Engineer complete all as specified and as directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 10cm n. exc. 15cm long with dia of neck 5 to 10 mm complete all as specified and as directed.

S&F mild steel bolts, dia of neck exc 12mm but n.exc 20mm dia, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long complete all as specified and as directed.

M&L for preparing new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc primer complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

S&F for Mild Steel Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, and gates; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 including spikes or flowers or any other onamental piece works of any number and necessary welding or fixing with screws etc complete all as specified and as directed.

M&L Steel work in tubular tru-sses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 painted one shop coat of redoxide primer complete all as specified and as directed.

M&L for mild steel work roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, square or flat sections) including distance pieces, cleats etc conforming to Fe-290 (Gde E165) complete all as specified and as directed.

Supply and Fix Pre-painted galvalume aluminum zinc coating trapizoidal profile sheet of 0.50 mm thick[TCT] of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. MAKE : M/s TATA BLUE SCOPE, M/s LLOYD INSULATIONS INDIA LTD, M/s BUILD TECH / JINDAL

M&L for mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-290 (Gde E165) complete all as specified and as directed.

M&L for Cutting chases, pinning in, making good the facings where required and pointing in CM 1:3 to ends or edges of landings steps, cills, sun shades, shelves, lintels etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting n. exc. 10 cm girth in stone, concrete block or concrete slab complete all as specified and directed.

M&L for preparing new wall surfaces in any location and applying two coats of exterior weather proof paint over a coat of primer complete all as specified and as directed. Make : Apex Ultima from Asian Paints / All Guard from Berger, Weather Shield Max Exterior Acrylic ICI Dulux

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc and removal of rubbish to the out side MD land complete all as specified and as directed.

M&L for rendering 10mm thick in CM (1:4) on fair faces of concrete surfaces and finishing even and smooth complete all as specified and as directed.

M&L 20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like laid on screed bed in cement mortar (1:4), 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, square or rectangle for rough finished surfaces complete all as specified and as directed.

Formwork to edges of concrete flats, breaks in floors, openings in concrete wall, rough finished surfaces of concrete complete all as specified and as directed.

M&L for RCC, 1:2:4 type B-1 (20 mm graded aggregate) in pillar foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC,1:2:4 type B-1 (20 mm graded aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

S&F mirror finished 1.20mm thick stainless steel letters and symbols of 30 cm height, width suitable for 30 cm height lettering fixed to the mild steel plate including necessary scaffolding, complete all as specified and as directed.

Demolition of un-reinforced cement concrete in (below or above ground level) and pavings not exceeding 15 cm thickness complete all as specified and as directed.

M&L for 150mm thick PCC (1:2:4) type B-1, using 20mm graded stone aggregates as in pavement and hardstaning laid in alternate bays and finishing the surface even and fair, complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc. set and jointed over and including Screed bed or bedding layer of 1:6 in Cement Mortar 15mm thick over 25 mm thick PCC 1:2:4 type B0, (Using 12.5 mm graded stone aggregate) over brushing neat cement slurry with 3.0kg of cement per sq. metr as in floors for laying floor finishes and pointed in white or coloured cement to match complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for glazed coloured ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over a backing coat of 10 mm CM(1:4) complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for rendering 10 mm thick cement plastering on wall surfaces followed by a coat of 5 mm thick cement plastering mixed with 2% WPC in cement mortar 1:4 in wall finished even and smooth w/o using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid seperateily under relevant item.

Supply only integral water proofing compound [ISI marked] complete all as specified and as directed. Make : Acco proof / Impermo / Lik proof / Scott No. 1

Preparation of new or previously untreated wall surfaces and applying two coat of Oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All 1st quality)

M&L for preparing newly plastered surfaces of internal walls, application of wall care putty (any number of coats required) and sand papering etc and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson Make for Distemper : Asian / Nerolac / Berger ( All 1st quality)

M & L for Preparing old distempered surfaces of walls by washing rubbing down and stopping and applying one coat of distemper oil emulsion of any colour complete all as specified and as directed. Make for Distemper : Asian / Nerolac / Berger ( All 1st quality)

M&L for preparation of existing ceiling surfaces and applying two coats of white wash complete all as specified and as directed

M&L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

S&F Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, rollers, anodised aluminium fitting and suitable handle and locking arrangement complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

M&L for 10 mm thick, prelaminated bison panel board, fixed to aluminium frame work complete all as specified and as directed

M&L for 12 mm thick, prelaminated particle board exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work complete all as specified and as directed. Make : Anchor / Novopan / Deco Board / Bhutan Board / Kitply / Eco Board / Archidlam / Asis / Greenply Industries

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

S&F Anodised aluminium grill, Deco grill" model DG -102 and fixed in channel including necessary fixing arragements etc complete all as specified and as directed

S&F 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi / Hindustan Pilkington

S&F Sheet glass, 5mm thick, ordinary quality and glazing with beads, in square exc. 0.5 sq. m in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi / Hindustan Pilkington

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F 150 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Dismantling boarding/partitions, any description, fixed in any position with screws complete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5sm but not exceeding 4.00sm each without taking off shutters from frames complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and as directed.

M&L for Vitrified Ceramic tiles dark shade 10 mm thick (square / rectangular) polished, area of each tile not exceeding 0.36 sqm as in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed or bedding layer in cement mortar 1:4, 15 mm thick over 25mm thick PCC 1:2:4 type B1 (using 20mm graded aggregates) as in sub base complete all as specified and as directed. Make : Johnson / Nitco / Asian Granito / Varmora

M&L for forming jambs, etc., to openings, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in CM 1:4 complete all as specified and as directed.

Complete removal of existing treatment on walls, preparing surfaces of walls applying putty two coats and sand papering till obtaining smooth surface and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

S&F powder coated aluminium sections for frames & shutters, doors, window frames fixed type or three/two track windows including shutters with provision of two types of shutters such as two nos glazed and one number gauged including aluminium deco grills, aluminium wire mesh and one or more rebates including joining cleat for fixing etc including and deco grill and all necessary fittings complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

Supply and Fix powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.)complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, made of aluminium extruded section body complete all as specified and as directed. Make : Godrej / Everite / Priya

S & F in repairs Vitreous china, wash hand basin, white, flat back of size 570 mm X 450 mm including brass chromium plated waste fittings with long screwed shanks and fly nuts, flange end bedded in red led cement and other end fixed, including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, connecting to bottle trap including PVC connection 450 mm long and 15mm dia with brass nuts connections etc complete all as specified and as directed. Make : C0449 Sutlej Basin of Parry ware / Hindustan Sanitaryware / Cera / Johnson as approved by GE

S&F PVC (SWR) pipe [ ISI MARKED ] 75mm dia single socketed with rubber ring joints laid in floors, trenches of fix to walls complete all as specified and as directed. Make : Supreme / Prince / KML classic Kisan

S & F in GI water tubing of 15 mm bore, medium grade (ISI Marked) conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors and testing complete all as specified and as directed. Make : Tata / Zenith / Jindal

S&F Looking mirror of 6mm thick bevelled edges of first quality Belgium glass fixed with SS studs complete all as specified and as directed. Make of mirror : Saint Gobian / Modi / Asahi

S&F Chromium Plated Towel Ring complete all as specified and as directed. Make : Jaquar, Model No. AKP-35721

S&F CP Pillar Tap complete all as specified and as directed. Make : Jaquar, Model No. KUB-35001

S&F CP Angle Cock complete all as specified and as directed. Make : Jaquar, Model No. CQT-23059

S&F CP Bottle Trap with internal partition, 32mm size with 250mm & 190mm long wall connection pipes & wall flange of Make : Jaquar, Model No. ALD-769

S&F PVC (SWR) [ ISI MARKED ] 110mm dia reducers complete all as specified and as directed. complete all as specified and as directed. Make : Supreme / Prince / KML classic Kisan

S&F PVC (SWR) [ ISI MARKED ] 110mm junction single, (Single T) equal or unequal complete all as specified and as direcetd. complete all as specified and as directed. Make : Supreme / Prince / KML classic Kisan

S&F Roller type Blinds / Venetian Blinds complete all as specified and as directed. Make : Vista / Standard make as approved by Accepting Officer

M&L for point wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLS (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore medium grade (ISI marked) concealed including Flush type metal GI boxes for fixing modular type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductor cable FRLS [ISI marked] as earth wire connected to common earth dolly and earth in distribution board including taking down existing point wiring complete all as specified and as directed, for one light/exhaust fan/fan point/call bell controlled by one switch.

All as per item No. 92 above but for one 5Amps socket on independent board Note for item Nos 92 & 93 : Make of Cable : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables Make of Conduit : Avon Plast,Precision, Finolex all are ISI marked.

S&F switch Modular type single pole 6 Amps One Way AC 230V, 50HZ supply 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F ceiling rose surface bakelite 65 X 50mm two to three terminals complete all as specified and as directed. Make : Cona / Anchor / Legrand

S&F Modular type socket 6A 2/3 Pin Combined AC 230V, 50HZ complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F modular white cover plate with frame 3 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F modular white cover plate with frame 6 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F fans ceiling complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated complete all as specified and as directed. Make : Crompton Greaves / Bajaj / Usha

S&F surface batten and LED tube light, retro bar professional WH 5700K and 1800 lumins of cool white with all accessories internally pre wired and including connecting up with twin core twisted copper conductor cable with suitable size including taking down existing FTL fittings of any type complete all as specified and as directed. Make for Batten : Surya cat no SLE DB 18 LED ALPHA / Bajaj luminaire cat pt No. BLRB DB 118 for 1 x 18W LED / HPL Cat no :- HLPLEDT801WT / CG Cat Part No. CG-LED20LUCDL / Havells Cat part No. LHFYBYPN1A1W022 Make for LED tube : Surya cat no. SLETL DS 18P / Bajaj cat No. BLRB 18W CW / HPL Cat no HLPT81418PCSS(CW) / CG Cat Part No. LT8-20-865-2 / Havells Cat part No. LHLDDAXEUL8Z018

M & L for Sub main wiring with 2 runs of 4 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of 20mm dia along with one run of 4.0 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly including taking down old submain wiring complete all as specified and as directed. Note: Two runs 4 Sq.mm. cable, one run of 4 Sq.mm cable and one run of PVC conduit will be measured as one unit. MAKE :(i) CABLE : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

M & L for Sub main wiring with 4 runs of 4 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of 20mm dia along with two runs of 4.0 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly including taking down old submain wiring complete all as specified and as directed. Note: Four runs 4 Sq.mm. cable, two runs of 4 Sq.mm cable and one run of PVC conduit will be measured as one unit. MAKE :(i) CABLE : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

M & L for Sub main wiring with 2 runs of 2.5 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of 20mm dia along with one run of 2.5 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly including taking down old submain wiring complete all as specified and as directed. Note: Two runs 2.5 Sq.mm. cable, one run of 2.5 Sq.mm cable and one run of PVC conduit will be measured as one unit. MAKE :(i) CABLE : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

S & F MCB SP 6 to 32 Amps, 240 Volts, B curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811008 to 811015 / STANDARD / HAVELLS

S&F Distribution Board, SPN 8 Way ,Double door with 200 Amps bus bar complete all as specified and as directed. Make : Indo Asian cat part No. 811807[Optipro] / Standard / Havells

S&F Distribution Board, TPN, 4 Way, Double door with 200 Amps bus bar complete all as specified and directed. Make : Indo Asian cat part No. 811841[Optipro] / Standard / Havells / HPL

S & F MCB SPN 40A Amps 240 Volts B curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811035 / STANDARD / HAVELLS/Schneider

S & F MCB FP 63Amps 240 Volts complete all as specified and as directed. Make: Indo Asian Cat part No. 811242 / STANDARD / HAVELLS/Schneider

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm c/c reinforcement both ways, watering funnel, 20 mm dia light grade for protection of earth electrode 20 mm dia for watering complete all as specified and directed and tested on completion.

Supply and install hi wall split units indoor / out door complete with cord less remote control unit and with in built air ioniser and plasma filter for better indoor air quality with Eco Friendly Refrigerant gas minimum 3 star rating ISEER 3.50 to 3.99 of capaccity 1.5 TR complete all as specified and as directed. Make : Carrier / Blue Star / Hitachi

Supply and install wall mounted voltage stablizer of 4KVA capacity, single phase naturally air cooled indoor type, auto operation with stablised in put voltage between 170V to 250 V with out put voltage stablized at 230V with accuracy + 2.5% complete all as specified and as directed. Make : V Guard / Servo / Micro Tech / Keeline

M&L for point wiring with two runs of single core 4 Sq.mm (Nominal area) PVC insulated unsheathed FRLS grade stranded copper conductor cable 1100 Volts grade drawn through and including concealed PVC rigid conduit non-metallic 20 mm dia medium grade including 4 Sq.mm, PVC insulated insheathed FRLS grade copper cable solid conductor as earth lead including PVC consealed / semi concealed terminal boxes made of 2mm thick MS sheet covered with 3mm thick laminated sheet for power points including cutting of brick masonry / stone masonry complete all as specified and as directed. Make of Cable : Finolex/Polycab/Plaza/Gloster/Harsh all are ISI marked and FRLS cables Make of Conduit : Avon Plast,Precision, Finolex all are ISI marked.

S&F Sheet metal enclouser single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 amps capacity complete all as specified and as directed. Make : INDO ASIAN / STANDARD / HAVELLS

N Sydeswara Rao

ASR CONSTRUCTIONS