Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.2 LAccepted-AOC | ₹4.2 L | L1 | Accepted-AOC L1 |
| 2 | L2₹4.5 LRejected-AOC | ₹4.5 L | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | D GOPIDASAN L1 | SELVAN V K L2 |
|---|---|---|---|---|---|
| 1.00road retarring | |||||
| 1.00 | OD412098/2025-2026::Filling up pot holes (cut and formed to regular shapes and all loose and defective
materials removed) after supplying a prime coat of hot bitumen using 36mm departmental
broken stone and compacting with power roller to get a compact surface. | 1.91 | cum | 8,130 ₹15,520.17 | 8,617.8 ₹16,451.38 |
| 1.00 | 75.5.2.2pb:Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. | 1,200 | sqm | 18.88 ₹22,656 | 20.01 ₹24,012 |
| 1.00 | 75.9.3.pb.pa:Plastic roads- Packed Bitumen Rate
20mm thick Open-Graded Premix Carpetusing Bituminous (penetration grade/modified bitumen) Binder -
Bitumen S-65 -Packed Bitumen and Shredded Plastic
Providing, laying and rolling of opengradedpremix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregateseither using penetration grade bitumen or emulsion to required line, grade and level toserve as wearing course on a previously prepared base, using HM Plant attached withopen pugmilll.Heating of aggregate at 150 degree Celsius to 170 degree Celsius, thentransferring the hot aggregate to pugmill and add shredded plastic @10.22 kg/100m2mixing well to form a uniform thin layer of plastic over - hot aggregate and adding hotbitumen (150 to 165 degree Celsius) @ 13.578 Kg/10m2 and mix well, laying and rollingwith a. three wheel 80-100 kN static roller capacity, finished to required level and gradesto be- followed by seal coat of either Type A or Type B or Type C as per TechnicalSpecification Clause 508
Case - I By Manual Means
(II) Bitumen (S-65),including supplying and stacking of materials. | 1,200 | sqm | 227.57 ₹2.7 L | 241.22 ₹2.9 L |
| 1.00 | 75.5.12.A.3.2pb:Seal Coat - Manual Means - Type C - Bitumen S-65 - Packed Bitumen Rates <br> Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 <br> A. By Manual Means <br> Case III : Type C <br> (II) Bitumen (S-65) | 1,200 | sqm | 93.49 ₹1.1 L | 99.1 ₹1.2 L |
Tender Value
₹5 L
EMD Value
₹12,500
Closing Date
27 Jan 2026, 1:00 pmClosed
O/F AE LID EW SECTION KIZHAKKENCHERRY
O/F AE LID EW SECTION KIZHAKKENCHERRY
353/25-26 MOOLANKKODE LIBRARY BACKSIDE ROAD MAINTENANCE
2026_LSGD_827538_25
T4/2025/AE/LIDEW/KZY/ET4
Open Tender
Civil Works - Roads
Kizhakkencherry
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,105
₹12,500
8 Apr 2026
19 Jan 2026
29 Jan 2026
19 Jan 2026
27 Jan 2026
19 Jan 2026
road retarring
OD412098/2025-2026::Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.
75.5.2.2pb:Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
75.9.3.pb.pa:Plastic roads- Packed Bitumen Rate 20mm thick Open-Graded Premix Carpetusing Bituminous (penetration grade/modified bitumen) Binder - Bitumen S-65 -Packed Bitumen and Shredded Plastic Providing, laying and rolling of opengradedpremix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregateseither using penetration grade bitumen or emulsion to required line, grade and level toserve as wearing course on a previously prepared base, using HM Plant attached withopen pugmilll.Heating of aggregate at 150 degree Celsius to 170 degree Celsius, thentransferring the hot aggregate to pugmill and add shredded plastic @10.22 kg/100m2mixing well to form a uniform thin layer of plastic over - hot aggregate and adding hotbitumen (150 to 165 degree Celsius) @ 13.578 Kg/10m2 and mix well, laying and rollingwith a. three wheel 80-100 kN static roller capacity, finished to required level and gradesto be- followed by seal coat of either Type A or Type B or Type C as per TechnicalSpecification Clause 508 Case - I By Manual Means (II) Bitumen (S-65),including supplying and stacking of materials.
75.5.12.A.3.2pb:Seal Coat - Manual Means - Type C - Bitumen S-65 - Packed Bitumen Rates <br> Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 <br> A. By Manual Means <br> Case III : Type C <br> (II) Bitumen (S-65)
stage.html
html • 0.04 MB
techsummary_1389195.pdf
finsummary_1389195.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.29 MB
Tendernotice_2.pdf
PDF • 0.27 MB
Tendernotice_3.pdf
PDF • 0.25 MB
Tendernotice_4.pdf
PDF • 0.25 MB
Tendernotice_5.pdf
PDF • 0.25 MB
Tendernotice_6.pdf
PDF • 0.19 MB
Tendernotice_7.pdf
PDF • 0.29 MB
BOQ_1389195.xls
BOQ • 0.30 MB
353.pdf
Tender Documents • 2.05 MB
Download all tender documents and submit your bid