8639/26-27/E8 (GE(N)/KOL/ OF 2026-27

Supply & fixing PVC insulated unsheathed single core multistranded FR-LSH industrial cable with elctrolytic grade annealed copper conductor, 1100 Volts grade of nominal area 185 Sqmm confirming to IS:694 including connection using copper lugs of suitable size after disconnecting and taking out old cables complete all as specified as directed..

All as per Item no. 1 above but nominal area of conductor 240 Sqmm complete all as specified as directed.

All as per Item no. 1 above but nominal area of conductor 120 Sqmm complete all as specified as directed.

M & L installation and commissioning for automatic power factor correction (APFC) panel for 3 phase 415 V & 50 hz system of capacity 200 Kvar with 8 stage (2X 50+3x25+2x10+5) with incomer MCCB ,controller unit MDXL capacitor ,Contractor relays etc,including disconnection of unserviceable panel ,taking out from power house /substation and deposite to MES store and all cable connections of new panel complete all as specified as directed.

M & L installation and commissioning for automatic power factor correction (APFC) panel for 3 phase 415 V & 50 hz system of capacity 70 Kvar with 8 stage (1x25+3x10+2x5+1x3+1x2) with incomer MCCB ,controller unit MDXL capacitor ,Contractor relays etc,including disconnection of unserviceable panel ,taking out from power house /substation and deposite to MES store and all cable connections of new panel complete all as specified as directed.

Supply and fix and connected in replacement of offload change over switch 400 amp 4 pole 415 volt, ,as per existing make suitable length for 4 way out going to be fixed/ mounted on pole /post / wall/ angle with suitable size of clamp, nut bolt, washer, angle of suitable size, etc required at site for fixing of bus bar complete including taking out the old unserviceable busbar unit complete all as directed.

Supply, installation and commissioning of inbiult solar powered LED street light hybrid type comprising of LED luminaires of 60W, lithium ferrous phosphate battery of 42AH, mono crystalline panel of 150 LPW & 100Wp, MPPT charge controller and necessary fixing arrangements like bracket/cross arms, nut bolts etc., colour temperature 6000-6500K after taking down old unserviceable light fitting complete all as specified and directed. Cat No. SSLE SISH 60WT3HD2125WP 54AH LFPHYB W5 SOLAR of Make: Suriya or equivalent in Philips/Crompton/Wipro/Havells

Material and labour for PCC (1:3:6) type C-2 with 40mm graded stone aggregated for foundation of electric pole, bus bar and panel board etc including necessary form work and demolition of old unserviceable concrete complete all as specified and as directed

Supply & Fixing hot dipped galvanised (Z+) wiremesh cable tray of 3 mtr length outdoor type with wire dia from 3.9 mm to 5.9 mm of size 3000mm X 54mm X 300mm including supports, manufactured with a longitudinal 'T' welded safety edge. Trays shall be constructed with 50mm /100 mm mesh configuration. Accessories for coupling and making 'T's and bends, screw based system combination must be used and mounting accessoriesare required of same finish of same manufacturer as per the site requirement (ceiling/wall mounted). trays should comply Standard EN ISO14 61: at least 550 hours of SST. Wire cable trays must be designed with an optimum span of 1.5 metres taking into account the maximum load carrying capacity as recomended by the manufacturer. Assembly having fire resistant properties and load bearing capacities of the brackets and the hanger torques must be tested in accordance with the Standard IEC 61537. No hot work of trays shall be allowed on site complete all as specified and directed. (MAKE: LEGRAND (CABLOFIL) model in COPE / LEVITON/PANDUIT)

Supply & Fixing Klippon terminal block for joining of two cable trays with fixing arrangement complete all as specified and directed. (MAKE: LEGRAND (CABLOFIL) model in COPE / LEVITON/PANDUIT)