Construction of RCC Circular tank 2.72 lakhs litres with pump house alongwith 15Hp pump at New Pahargaon, Satellite Quarter at Prothrapur in Ward No.20, Birsha Nagar Ward No. 18, Birjgunj in Ward No.22, Mahaveer Nagar Tank compound, Bird line Ward No

Amount

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All kinds of soil.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand(zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources).

Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III)derived from natural resources : 3 graded stone aggregate 20 mm nominal sizederived from natural resources ).

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Arches, domes, vaults up to 6 m span

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Providing and mixing waterproofing compound in RCC works @1Kg per bag.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

40 mm thick with 20 mm nominal size stone aggregate

12 mm cement plaster of mix :

1:4 (1 cement: 4 fine sand)

Finishing walls with water proofing cement paint of required shade :

New work (Two or more coats applied @ 3.84 kg/10 sqm).

Aluminium plan sheet 22/24 SWG intersect in joints of walling

Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 :

150 mm dia Ductile Iron Class K-7 pipes

200 mm dia Ductile Iron Class K-7 pipes

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :

150 mm diameter Class II

200 mm diameter Class II

Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class) :

Up to 300 mm dia.

Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead :

150 mm diameter pipe

200 mm diameter pipe

Supplying pig lead at site of work.

Construction of Pump House

Providing, installation, testing and commissioning of 01 No. 15 HP / 22 KW, 3-Phase, 4 - pole, 415 Volts ± 10 %, 50 Hz ± 5 % designed run at 1500 RPM, with 'F' Class insulation and temperature rise limit upto class 'B' and has to be totally enclosed fan cooled squirrel cage induction motor, similar to Kirloskar / Crompton Greaves make coupled with water Pump similar to Kirloskar make, model DSM 65/32A or equivalent to C.I make, C.I impeller having a suction and delivery of 80 X 65 mm with a minimum discharge of 14.00 LPS including supplying and installation of base frame with foundation bolts and nuts, coupling assembly, coupling gaurd, C.I foot valve (80 mm) etc. as required.

Providing, Installation, testing and commissioning of 01 No. 16 HP, designed to run at 1000 RPM, three cylinder, water cooled, Vertical Diesel Oil engine similar to Kirloskar make model No. 3R - 1040 coupled with water Pump similar to Kirloskar make, model DSM 65/32A or equivalent to C.I make, C.I impeller having a suction and delivery of 80 X 65 mm with a minimum discharge of 14.00 LPS at a head of 65.00 mtrs. including supplying of 01 Nos.12 V, 150 AH battery and supplying and installation of base frame with foundation bolts and nuts, coupling assembly with gaurd, C.I foot valve (80 mm), fuel tank assembly for 8:00 Hrs.along with stand and fuel line hose etc. as required.

Prasur Electricals and Engineering Company (BID ID -60430)

T ROBERT KENNEDY (BID ID -60145)