REPLACEMENT OF SANITARY FITTINGS REPAIR TO INT WATER SUPPLY OTHER BR REPAIR WORKS LIKE TILING PLASTERING AND JOINERY ETC IN SINGLE LIVING ACCN OF JCOS ORS ADM BLDG AND OTHER OTM ACCN UNDER THE AREA OF AGE BR II ARMY CENTRAL IN AA JODHPUR (8931/E8)

Amount

Demolition of Cement concerte in ground floor and paving n exc 15 cm thickness below or above ground level , complete all as directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises , complete all as directed.

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as directed.

25mm thick cement concrete type B-0 1:2:4 (using 15mm graded crushed stone aggregate) complete all as specified and as directed.

75mm thick cement concrete type B-1 1:4:8 (using 20mm graded crushed stone aggregate) as in sub base complete all as specified and as directed.

Machine made precast cement concrete blocks (Interlocking pavers ) rubberised finished coloure of 60mm thick top layers of anti abrasive material laid over and incl 25mm thick sand cushion. The interlocking tiles joint will be filled with fine sand.

Machine made precast cement concrete curb stone blocks using cement concrete 1:2:4 type B1 (20mm graded agg) all as specified and directed.

Chequered cement concrete coloured tiles 25cmx25cmx20-22mm thick set jointd and pointed in neat cement slurry in floor all as specified and directed by Engr-in-charge.

Precast cement concrete laquer coated tiles 30cmx30cmx20-25mm thick machine pressed set jointd and pointed in neat cement slurry in floor all as specified and directed by Engr-in-charge.

50mm thick PCC 1:3:6 type C1 using ( 20mm graded agg) as in plinth protection finished complete including forming joints in 2 Mtr intervals and filled with bitumen mastic all as directed.

15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes., complete all as specified and as directed.

Coloured Glazed ceramic tiles in vertical surface 375x250x6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and as directed

-ditto- all as item No 12 above but 300x450mmx6-7 mm thick complete all as specified

Non Skid coloured ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.06sq m but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , complete all as specified and as directed

Non Skid coloured ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , complete all as specified and as directed

-ditto- all as item No 15 above but as in skirting

Non Skid coloured ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

-ditto- all as item No 17 above but as in skirting

Vitrified Ceramic tiles 9-10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed

-ditto- all as item No 19 above but as in vertical surface

Machine cut kota stone slab flooring 17-20 mm thick over 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified.

-ditto- all as item No 21 above but in dado/skirting

15-17 mm thick granite (of any type) machine cut in cooking plateform laid over 10mm thick screed bed in cement mortar(1:4) and joined with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including polishing ,complete all as specified and directed.

Taking down cement plaster any description on brick wall or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc and preparing the surface to receive surface ,complete all as specified and directed.

15 mm thick rendering in CM 1 : 4 as in backing coat of wall tiles,complete all as specified and directed.

15mm thick cement plaster in CM 1:6 on other than fair surfaces or over stone masonary surface faces finished the surfaces even & smooth without using extra cement all as specified and directed.

10mm thick cement plaster on fair faces of brick work or concrete surface in CM 1:4 and finished surface even and smooth without using extra cement as in ceiling ,complete all as specified and directed.

Preparation of newly plastered surface of ceiling and applying three coats of white wash ,complete all as specified and directed.

Preparation of newly plastered surface of wall and applying three coat of white wash ,complete all as specified and directed.

Applying two coat of OBD on newly plastered/ unplastered surfaces over two coat of wall care putty on walls & including preparation

Applying one coat of white wash after preparation of old decorated surface of wall,complete all as specified and directed.

Applying one coat of Oil Bound surface distemper after preparation of old decoated surface on walls.,complete all as specified and directed.

Removing complete existing treatment and preparation of old surfaces by brooming down or steel wire brushinng scraping moulds,mossand effloroscent salts &tradiing oil and greasy spots to wall including cornices etc plastered or unplastered surtfaces (old decorated surffaces) and M&L for applying two coat of OBD on newly plastered/ unplastered surfaces over two coat of wall care putty on walls all as specified and as directed.

Taking up or down 15mm bore steel tubing medium grade and connections, as in walls, ceiling, floor etc including cleaning for re-fixing or credit to the work

-ditto- all as item No 34 above but 20 mm bore

-ditto- all as item No 34 above but 25 mm bore

Fixing only steel tubing 15mm bore medium grade ISI Marked galvanized with and Including all fitting fixed on wall, ceiling or laid to floor complete all as specified.

Fixing only steel tubing 20mm bore medium grade ISI Marked galvanized with and Including all fitting fixed on wall, ceiling or laid to floor complete all as specified.

Galvanised steel water tubing medium grade of 15mm bore with all fitings and fixtures complete.

Galvanised steel water tubing medium grade of 20mm bore with all fitings and fixtures complete.

Galvanised steel water tubing medium grade of 25mm bore with all fitings and fixtures complete.

15 mm bore Bib taps chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.Make :Jaquar/cera

Brass chromium plated shower rose 125mm dia with swivel joints any size incl fixing to steel pipe or union complete all as specified and directed.Make : Jaquar/cera

15 mm fancy type angle valve cast copper alloy chromium plated screwed high pressure with fancy type handle screwed both ends for iron or union and fixed in repairs.

PVC connections 15 mm size with PTMT nuts of length 450mm long.

CP wall mixture 3-in-1 system including 1.50m long tele shower and overhead shower of size 150x150mm. Make Cera/jaquqr

Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete with and incl plastic water closet seat cover white closed pattern with flat bottom, and mild steel chromium plated or aluminised hinges device including connecting to flush pipe.Make : Hindware/cera

EWC complete set constellation dual flush (WC consetellation 5 ped constellation, EWC, cistern & lid CON dual flush, seat cover constellation, cistern fitting (water saver-dual flush) etc complete. Make : Hindware/cera

Vitreous china squatting Pan, Orissa Pattern of size 580X440mm white (ISI marked) with integral foot rests and cast iron `P' or `S' trap front or back inlet Including flush pipe 40mm dia HDPE pipe etc, fixed in repairs Including connection to trap etc and provision of cement concrete bedding and making good to floor completely all as directed.Make : Hindware/cera

PVC valve less symphonic action type flushing cistern 9-10 ltrs capacity low level with inlet, ball valve, float and handle including brackets.Make : Hindware/cera

Cast iron floor trap of 75mm outlet dia, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4)

Plastic water closet seat cover white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinges device PVC seat covers for water closet pan (pedestal pattern)

Wash basins, Vitreous China white, flat back, size 630x450mm excluding tap, waste chain and plugs but including brackets(flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe Make : Hindware/cera

Pillar taps, fancy type Cast copper alloy, with capstan heads chromium plated, screwed down high pressure, with or without lettered 'Hot" or Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe

Brass chromium plated basin mixure with "Hot" and cold arrangements long sank suitable for fixing of 15mm bore of pipe approved quality make" Prayag

PTMT waste coupling of 32 mm dia for wash basin as in repairs all as specified and as directed.

Vitreous china bowl urinal flat back, size of 465 x 355 x265 mm white (minimum ),with grating and union for discharge pipe (excluding flushing cistern and flush pipe and waste pipe ) in repairs.

PVC waste pipe for WHB/Urinal complete all as specified and as directed.

Dismantling existing water tank of capacity Exc 250 but n.exc 500 ltrs capacity

Ditto all as item No 61 above but Exc 500 but n.exc 1000 ltrs

S&F Rotational moulded polythylene water storage tanks(triple layer) 500 ltrs capacity (cylendrical vertical with closed top) hoisted.Make Sintex/Rotex/Polytuff

Ditto all as item No 63 above but 1000 ltrs capacity

20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe & fixed.(Minimum weight 210gms)

CP mild steel grating 100mm dia as in repairs.

Tubular towel rail 20mm dia brass chromium plated `D' type 45cm long with bracket and fixed complete all as directed Make:- Cera/ Jaquar

Tubular towel rail 20mm dia D type 60cms long between flanges brass chromium plated as in repars.Make:- Cera/ Jaquar

Toilet paper holder chromimum plated all as per specified and directed. MakeJaquar

Towel ring of CP & including Chromium plated brass screws & wooden / plastic cleats (Minimum weight 90gms)Make:- Cera/ Jaquar

Looking Mirror Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) (450x125x25mm)

Lookong mirror glass shelves (Size : 450x125mm) fixed with and including Chromium plated brass screws and wooden/plastic cleats

Corner Glass shelf 300mm Make:- Cera/ Jaquar

Health foucet with 1000mm long flexible mild steel tube with wall hook complete all as specified and directed by Engineer-in-Charge.(Make : Jaquar/cera

PVC Jet with flexible tube complete all as specified and as directed by Engineer-in-Charge.Make: Jaquar/Cera

Sink with drainage board made of stainless steel .80 mm thick for kitchen with plugs , washer and waste including fixing contilever brackets and connecting union to pipes overall size 915mmx460mm bowl size 410mmx330mmx160mm fixed in repairs. Make Bluestar/Nirali/Jayana.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 100mm bore & taken out of trenches if requiredas directed

All as per item No 77 above but 75mm dia

75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls

110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls

75 mm bore PVC (SWR) bends any radius with oval acess door

110 mm bore PVC (SWR) bends any radius with oval acess door

75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with oval acess door

110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with oval acess door

110mm PVC (SWR) WC connector with lip ring

UPVC Vent Cowl 75 mm bore

PVC (SWR) floor trap, plain with grating including jointing with solvent cement for 75 mm bore pipes

100 mm bore Cast iron soil, (sand cast) waste and vent pipes, in any length with or without ears, with cement joints, fixed to wall

CI pipe (Sand cast) 75 mm dia laid in floor with cement joint all as spcified.

CI bends any radius 100mm

All as per item No 92 above but 75mm dia with oval acess door

CI SWR vent cowl 100mm

PVC coated curtain rod 20 to 22 mm dia with and including two Nos MS brackets and decorative type knobs at ends of each curtain rod fixed to wall complete as directed by Engr-in-Charge.

Taking down steel ventilator of any description n. exc 1sqm each.

Steel ventilator with top hung shutters with glazed bars including hinges steel peg stay etc complete all as specified.

Taking down Chowkhat or frame with shutter (without taking out shutter from frame) of area not exc 1.5sqm each complete.

Taking down shutter of any description area exc 1 Sqm but n. exc 2 Sqm each complete.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawings.

Factory made solid pannel PVC door shutters 30mm thick (style) consisting of frames made of MS Tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20mm width struck inside with solvent cement for styles and plain colour PVC sheet for top rail ,lock rail and botom on either side and as gap insert for top rail and botom rail,paneling of plain colour PVC sheet to be fitted to the MS frames/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement,supplying and fixing in the frame at site as per specifications and drawing.

Two coat of synthetic enamel paint over a coat of red oxide primer on steel and iron surfaces over 10 cms in width or girth not other wise descrived including preparation of new surfaces all as specified and as directed by Engr-in-Charge.

100mm size butt hinges medium weight (ISI Marked), rolled mild steel complete.

150mm size extruded aluminium alloy handles, fabricated type anodized complete.

150mm size Aluminium anodized barrel bolts of extruded section complete.

Demolition of stone masonry built in cement mortar ,complete all as directed.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded, bedded and solidly hearted built in cement mortar 1:6

All as per item No 107 above but except stone

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing

Providing precast cement concrete Type C1 1:3:6 using (20mm graded aggregate), solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls

Raking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified.

Two coat of colour wash on newly plastered/ unplastered surfaces over one coat of white wash on wall & including preparation

Preparing the old surfaces by steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts, trading soil and greasy spots etc and applying One coats of cement base paint on old external walls.

Shower Panel with wall hook complete all as specified and directed by Engineer-in-Charge.(Make : Jaquar)

Precast cement concrete louvers & jallies, 35mm thick in 1:2:4, Type B0 (Using 12.5mm graded agg) and fixed in CM 1:4.

Precast cement concrete in 1:2:4, type B1 (Using 20mm graded agg) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), strings courses, coping, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicatd), with plain fair faces, including chamfers, weathering, throating etc. and setting in mortar complete with joints to match.

Note for all above items:All items in BOQ are for"Materials and labour /Supply and fix" and to be executed in "Repairs i.e incl takng down old material" unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are required to quote their rates accordingly.

BEYLIM INFRA

M/s Vishnu Infrastructures

HOODA CONSTRUCTION COMPANY

SNEH CORPORATION