Do the necessary modification work of installed Solar tree system at Pump house- 1,GIDC,Sanand-2

Total Amount in Rs

Total Amount in Rs

1 S.I.T.C of Poly Crystline/Mono Crystline PV Module (ALMM Per 390.00 30.30

approved) with 72 Cells - 150 Cells or More , Frame Material : Watt

Anodized Aluminum alloy Frame With Twin Wall Profile, Front

Cover : High Transmission Low-Iron Tempered Glass (AR Coated),

High efficency and positive power tolerance Pmax: 0/+5, Module

Efficiency should be approx. 18%-21%, Normal operating

temperature 45'C, Junction Box with Waterproof IP67 & MC4

Compatible and Enclosed with Bypass diodes 100%

Electroluminescence test to ensure error free Modules, Thw temp.

co-efficient of the PV module shall equal or better than -

0.45%/degree C. Solar PV modules of minimum fill factor 75% to

be used. Unit Production:- 4 to 5 Unit /kw /day (Actual)(1Year

Avg) With 10 year Product warranty and 25 year Linear Power

Warranty.(B) Moudule o/p Range: 365 - 390 watt, Maximum

Power Voltage Vmpp: 39 - 40 V, Maximum Power Current Impp: 9 -

2 S.I.T.C of Solar Inverter Gried Tied: MPPT Range: 80-1000 V, Max Per 100000.00 9.09

efficiency: 97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating Watt

Altitude (m) ≤4000, O/p Power Factor: ~1, O/P THDi: <3%,

Operating Tempreture Range: -25~60°C, Anti-islanding

Protection: Integrated, Input Reverse Polarity Protection

Integrated, Insulation Resistor Detection Integrated, Residual

Current Monitoring Unit Integrated, Output Over Current

Protection Integrated, Output Short Circuit Protection Integrated,

Output Over Voltage Protection Integrated, Protection Degree:

IP65, User Interface LCD & APP,Datalogger & Communication:

GPRS / Wi-Fi (Optional)(C) Solar Inverter: 6 kW to 15 kW: Max.

input Current: 22 A, Max DC i/p Power: 7800-19500 W & Nominal

o/p Power: 6000-16500 W, Nomimal O/p Voltage: 400 V 3-Phase,

Nominal O/p Current: 10-24A,

3 SITC of XLPO/XLPE Insulated, Tinned Copper, Single Core Solar DC Mtr 300.00 95.95

Cable of size 6 sq.mm

4 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable Mtr 1500.00 540.35

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following

size of cables 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)

5 Providing & laying approved make Double walled corrugated Mtr 200.00 62.62

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

depth in existing trench for laying of cable. below ground / road

surface for enclosing cable 50 mm outer dia

6 Providing in standard length ISI mark high density Polyethylene RMT 800.00 631.25

H.D.P.E. Pipes suitable for potable

water as per IS specification no. 4984/1995 including all local

and central taxes, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to the

dept. stores etc. comp.and lowering,laying and jointingHDPE pipe

and specials 6.0 Kg/cm2 160 mm dia

7 Providing and, fixing heavy duty flange type brass double Ea 50.00 140.39

compression type cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc

for following size of cables. 3 & 1/2 core 120 Sq. mm

8 SITC of Solder less crimping type Aluminium lugs conforming to IS Ea 80.00 45.45

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

9 Making trench in soft soil of suitable width of 90 cm deep for Mtr 1000.00 55.55

laying cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

10 SITC of Fibre sheet Shed with necessary mounting arrangement for Sq.ft 300.00 353.50

the protection of Solar inverter as directed by engineer in charge

11 S.I.T.C of Distribution board from AC Side, ACDB 3-Phase - 11 kW - Ea 5.00 8304.22

20 kW: AC1 DUTY CONTRACTOR‐40A 4P,

100A MCCB 4P(Cat III), 3 PHASE SPD, VOLTAGE MONITORING

ELR WITH CBCT, PHASE INDICATING LAMP, POWER CABLE &

OTHER ACCESSORIES, All switchgears and connection are

enclosed with IP66 Enclosure and operate the MCB position.

12 S.I.T.C of Distributiob System DC Side, DCDB - 20 kW - 25 kW Ea 5.00 14723.78

(5in:5out) : Input Mcb - 1000 V, 16 Amp,

1000 V DC SPD TYPE 2, TERMINAL/END,PLATE/END CLAMP:

4SQMM (KUT6) FOR OUTPUT, DC CABLE With suitable size of

interconnection.

13 Supplying & Errecting MC4 Connector Male - Female Set for Solar Ea 100.00 52.52

DC Cable which is installed in Solar PV-module/Inverter/DCDB

Total of work of SITC of items from sr no.1 to 13

14 Buyback of Old Solar Inverter of 100 KW. Ea 1.00 75750.00

Note:- The Bidder has to note that buyback amount of

Rs.75750 fixed by the corporation and the same will be

deducted from RA bill of the Bidder and also note that

above/below quoted rate shall not applicable in this item