24/7/365 Day-to-Day Operations and Maintenance and Annual Term Contract for Day-to-Day Civil and PHE

AIIMS Mangalagiri : Outsourcing of day to day maintenance services and upkeep of all internal and external assets of Hospital buildings/ Institutional buildings/Hostels/Bungalows/Pump House/Flats i/c staff quarters, in AIIMS Mangalagiri Campus, including repair / replacement of damaged/defective civil fittings & fixtures i.e. all carpentry work, water supply/sanitary installation i.e. plumbing work, repair to plaster, flooring etc. i.e. masonry work and etc. complete by providing sufficient labors in proper uniform i/c T&P except material as per direction of the Engineer-in-charge and operations defined as under (Necessary materials required to attend the complaint /Job shall be issued by the department free of cost:-(All days)

Providing services of Carpenter for maintenance, repairing and fixing of damaged doors, windows, ventilators of steel/wood/PVC etc. at all floors, fixing of glass panes of door/windows including fittings, looking mirrors and all other carpentry works required to keep them in proper functional conditions to the entire satisfaction and as per direction of the Engineer-in-charge (12 Months)

Providing services of Plumber with minimum Qualification in Plumbing/Fitter ITI with 05 (Five) Years of experience in his Trade for maintenance and repair of plumbing system for the entire campus including repairing leakages or over flows of water from PVC/RCC overhead tanks, cisterns, replacement of GI pipes, fitting And fixtures to keep the entire water supply system efficient and functional to the entire satisfaction and as per direction of the Engineer in- charge. (12 months)

Providing services of Mason for maintenance and repair of all internal and external plaster, flooring, all masonry work, RCC, CC gola, leakages of roofs, floor, traps, W.C., joints of pipes & fittings and fixing frames for manholes, traps etc. to the entire satisfaction and as per direction of Engineer-in-Charge (12 months)

Providing services of Beldar for assisting all above skilled staff i.e. Carpenter, Plumber, Mason, Painter etc. They can also assist the work at various locations of AIIMS-Mangalagiri requirement i.e. cleaning of terrace etc.. and as instructed by AIIMS-Mangalagiri authorities to the entire satisfaction of Engineer-In-Charge. (12 months)

Item realted to general work(CIVIL)

Stone Aggregate (Single size) : 20 mm nominal size (As per CPWD Specification)

Coarse sand (Zone-III) (As per CPWD Specification)

Fine Sand (Zone-IV) (As per CPWD Specification)

Portland Cement (OPC-43 Grade) (Ramco/Birla)

White Cement (Birla/JK)

Water proffing material (FOSROC/As per Cpwd specification)

Twisted steel/ deformed TMT bars Fe-500D (TATA/Jindal/RINL)

Vitrified tiles Antiskid finish of size 60 x 60 cm (H.R.Johnson/Kajaria/Bell/Netco/Somany)

Vitrified floor tile 60x60 cm (H.R.Johnson/Kajaria/Bell/Netco/Somany)

Ceramic Glazed Tiles 1st quality minimum thickness 5mm in all colours shades and and designs of white, Ivory, Gray, Fume Red brown etc (Johnson/Somany/Kajaria/Nitco/Orient/Bell/Ceramics)

Ceramic glazed wall tiles minimum thickness 5mm

Common burnt clay F.P.S. (non modular) bricks class designation 7.5 (As per CPWD Specification)

Common burnt clay F.P.S. (non modular) bricks class designation 5.0 (As per CPWD Specification)

Granite stone all colour (slab area above 0.50 sqm) (As per CPWD Specification)

Kota stone 20 mm to 25 mm thick (semi-polished) (As per CPWD Specification)

Araldite Standard Epoxy Adhesive (Resin 1kg + Hardener 800g) 1.8 Kg

SP-100 Tile joint/Granite Joint

Item Related to Carpentry

Anodised Aluminium sliding door bolt 300x16 mm with screws, bolts, nuts and washers complete (Godrej/Classic/Ebco)

Anodised Aluminium sliding door bolt 250x16 mm with screws,bolts, nuts and washers complete (Godrej/Classic/Ebco)

Anodised Aluminium handles 125 mm with plate 175 x 32 mm with screws,bolts,nuts and washers complete (Godrej/Classic/Ebco)

Aluminium hanging floor door stopper with twin rubber & stopper with screws,bolts,nuts and washers complete (Godrej/Classic/Ebco)

Anodised Aluminium tower bolt (barrel type) 250x10 mm with screws,bolt,nuts and washers complete (Godrej/Classic/Ebco)

Anodised Aluminium tower bolt (barrel type) 100x10 mm with screws,bolt,nuts and washers complete (Godrej/Classic/Ebco)

Aluminium openable window handles(Fastner) with necessary screws,bolts,nuts and washers complete (Godrej/Classic/Ebco)

Hydraulic door closer tubular type Aluminium section body with screws,bolts,nuts and washers complete (Godrej/ISI Marked)

75mm SS fancy handles for kitchen cabinet (Hettich/Ebco)

100mm SS fancy handles for kitchen cabinet (Hettich/Ebco)

125mm SS fancy handles for kitchen cabinet (Hettich/Ebco)

Anodised Aluminium butt hinges 100x75x4 mm (Godrej)

Anodised Aluminium butt hinges 100x63x4 mm (Godrej)

Anodised Aluminium butt hinges 75x63x4 mm (Godrej)

Heavy Door Closer (for fire&Other Heavy Doors)with screws,bolts,nuts and washers complete (Becker/Godrej/Ozone/Hardwyn)

Double action hydraulic floor spring with stainless steel cover plate (Becker/Godrej/Ozone/Hardwyn)

Aluminimum window star locks (ISI Marked)

Aluminimum window runners (Wheels) (ISI Marked)

Stainless steel SS grade 304 , curtain rod 20 mm dia 1.20mm thick (As per CPWD Specification)

Stainless steel SS grade 304, brackets ( curtain rod) 20 mm dia 1.20mm thick (As per CPWD Specification)

Bolts and Nuts with washer

16mm dia 60mm long (Approved make)

16mm dia 65mm long (Approved make)

20 mm dia 65 mm long (Approved make)

20mm dia 70mm long (Approved make)

20mm dia 75mm long (Approved make)

20mm dia 80mm long (Approved make)

24mm dia 85mm long (Approved make)

24 mm dia 90 mm long (Approved make)

27mm dia 100mm long (Approved make)

Anchore bolt 6mm (Approved make)

Anchore bolt 8mm (Approved make)

Anchore bolt 12mm (Approved make)

Anchore Fastner- M10 (Approved make)

S S Screws

13mm x 6mm (Approved make)

13mm x 8mm (Approved make)

19mm x 6 mm (Approved make)

19mmx8mm (Approved make)

19mmx10mm (Approved make)

20mm x 5mm (Approved make)

25mm x 6mm (Approved make)

25mm x 8mm (Approved make)

25mm x 10mm (Approved make)

35mm x 8mm (Approved make)

35mm x10mm (Approved make)

50mm x 10mm (Approved make)

60mm x 10mm (Approved make)

75mm x 10mm (Approved make)

20mm (Approved make)

32mm (Approved make)

50mm (Approved make)

65mm (Approved make)

75mm (Approved make)

100mm (Approved make)

150mm (Approved make)

Self drive screws 4mm to 16mm (Approved make)

Studs(Stainless Steel Mount Stand) for Glass/Acrylic sheet 1 inch-4inch (Approved make)

Self-tapping pan head nickel coated mild steel screws of size 13x 3.2 mm (Approved make)

Nails 1 inch (Approved make)

Nails 1.5 inch (Approved make)

Casing Pin (100 Pcs) (Approved make)

PVC Rawl Plug

PVC Rawl plug 4 to 12mm (100 Pcs) (Approved make)

Drill bit 1mm (Approved make)

Drill bit 2mm (Approved make)

Drill bit 3mm (Approved make)

Drill bit 4mm (Approved make)

Drill bit 5mm (Approved make)

Drill bit 6mm (Approved make)

Drill bit 7mm (Approved make)

Drill bit 8mm (Approved make)

Drill bit 10mm (Approved make)

Drill bit 12mm (Approved make)

Drill bit 16mm (Approved make)

Drill bit 20mm (Approved make)

Drill bit 26mm (Approved make)

Wood Cutting Blade ,5 inch (Bosch/Approved make)

Marble/Wall/Granite/Concrete Cutting Blade Dry/ Wet Metal Cutter ,4 Inch (Bosch/Approved make)

4 Tile Cutting Blade Dry/ Wet Metal Cutter , 4 Inch (Bosch/Approved make)

Metal Cutting Wheel type Blade, 4 Inch (Bosch/Approved make)

Hexa Frame Blade (Any ISI Marked Heavy)

Water Proof Sand Paper all size (Any ISI Marked Heavy)

Welding rod Size 3.15mm x 350mm (Pack of 20) (Mangalam,TATA Agrico, An isi marked)

Welding Rod Size 4.0mm x 450mm (Pack of 20) (Mangalam,TATA Agrico, An isi marked)

HDPE 5MM welding rods black 1kg net Roll (Any ISI Marked Heavy)

Melamine polish (Berger/Asian/Neorlac/)

Gum 1 kg (Fevicol Hitex)

GI Wire mesh 14guage x 24guage (Any ISI Marked Heavy)

Stainless steel (SS 304 grade) adjustable friction window stay255 x 19 mm (Giesse/Classic/Ebco)

Hermetically sealed double glazed unit made with 6 mm thick clear float glass both side having 12 mm air gap (Saint gobain/Atul/Modi Float Glass (India))

Water proof ply 12 mm thick(Antitermite) (Dura/Greenlam/century)

Hinges with Metal Screws ( M6 x 15 ) (Becker/Ozone/Godrej)

Neoprene/EPDM rubber gasket (Anand/Reddiplex/Enviro Seals)

Weather Silicon sealant - DC 789 (Any ISI Marked Heavy)

Toilet cubicle Door locks (SS 304) (Any ISI Marked Heavy)

Toilet cubicle nuts and bolts (SS 304) (Any ISI Marked Heavy)

Toilet cubicles handels (Any ISI Marked Heavy)

30 mm thick prelaminated flush door shutter (As per Cpwd specification)

Europrofile mortize pin cylinder (Godrej/Becker)

Europrofile mortize Lock bodies (Godrej/Becker)

Baby Latch with Handle Set (Godrej/Becker)

20cm (200mm) Pull handle (Godrej/Becker)

Drawer cupboard lock Left Opening (Godrej/Becker)

SS304 Hinge 12.5x7.5x0.3cm (125x75x3mm) 2 Ball Bearing (5x10) (Godrej/Becker)

2 Inch Tower bolt for Laminated storage (HAFELE/Godrej/Ebco)

36mm Ball Bearing Runner 350MM Zinc (HAFELE/Godrej/Ebco)

Hydraulic cylinder for bed for Single bed (HAFELE/Godrej/Ebco)

Rectangular shape 1500x450 mm Mirror with Plastic moulded frame (Modi/Saint Gobain/Atul)

Rectangular shape 1500x450 mm Mirror (Modi/Saint Gobain/Atul)

Fosted glass (Modi/Saint Gobain/Atul)

Clear glass 6mm (Modi/Saint Gobain/Atul)

EPDM Gasket in Kg (Above 60 g / m) (Any ISI Marked Heavy)

Weather/structural non sag elastomeric PU sealant (600ml Sausage) for joints in RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum/ Alluminium work complying to ASTM C920, DIN 18540-F & ISO 11600 incl all taxes (Fosroc/Dr.fixit/Roff/Asain)

GI sheet 0.8 mm thick confirming to IS 277:1992 (Any ISI Marked Heavy)

Aluminium casement window fastener (Anodised AC 15) (Any ISI Marked Heavy)

Aluminium casement window fastener (powder coated ) (Any ISI Marked Heavy)

Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 12817 marked (Godrej/Becker)

Items Related to Plumber

Circular shape 560 mm dia precast R.C.C. manhole cover with frame -H.D. - 20. (Kk/Sk Precast/ Advent )

C.I. cover and frame 300x300 mm inside (AS ISI marked)

S.W. gully trap P type 100x100 mm (AS ISI marked)

C.I. grating 100x100 mm (AS ISI marked)

White plastic seat (solid)with lid C.P.brass hinges and rubber buffers (Roca/Parryware/American standard)

Vitreous china flat back wash basin 630x450 mm (Parryware/Hindware/Jaquar)

Vitreous china Orissa type W.C. pan size 580 mm (Roca/Parryware/American standard)

Vitreous china pedestal type water closet (European type W.C. pan) (Parryware C02971C) (Roca/Parryware/American standard)

Floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make,shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system including all fittings andfixtures with seat cover, cisternfittings, nuts, bolts and gasket etc.(ROCA-RS346303460) (American standard CL3128B-6DAINST) (Roca/Parryware/American standard)

Vitreous china 10 liters low level cistern with All complete fittings (Jaquar/Parryware/hindware)

Stainless steel kitchen sink - with drain board 510 x 1040mm bowl depth 225mm. (AS ISI marked Heavy)

Stainless steel kitchen sink - without drain board 610x510mm bowl depth 200mm. (AS ISI marked Heavy)

Flushing Cistern P.V.C. 10 liter capacity (low level)(White) (with fittings,accessories and flush pipe) (Jaquar/Parryware/hindware)

C P trap Jali 125mm (AS ISI marked Heavy)

G.I. pipes 25 mm Dia. (Jindal/Tata/Prakash/surya/Swastik)

Unplasticised P.V.C. connection pipe with brass union 45 cm long 20 mm bore (AS ISI marked Heavy)

Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore (AS ISI marked Heavy)

Unplasticised P.V.C. connection pipe with brass union 30 cm long 20 mm bore (AS ISI marked Heavy)

Unplasticised P.V.C. connection pipe with brass union 30 cm long 15 mm bore (AS ISI marked Heavy)

Brass full way valve with C.I. Wheel (Screw end) 25mm Dia. (Zoloto/ Leader/ Sant/ Kirloskar)

Brass full way valve with C.I. wheel (screwed end) 32 mm dia (Zoloto/ Leader/ Sant/ Kirloskar)

Brass full way valve with C.I. wheel (screwed end) 40 mm Dia. (Zoloto/ Leader/ Sant/ Kirloskar)

Brass full way valve with C.I. Wheel (Screw end) 50mm Dia. (Zoloto/ Leader/ Sant/ Kirloskar)

C.P. brass sink waste 32 mm (Any ISI Marked Heavy)

C.P. brass sink waste 40 mm (Any ISI Marked Heavy)

C.I. sluice valve (with caps) class I: 300 mm dia (Zoloto/ Leader/ Sant/ Kirloskar)

C.I. sluice valve (with caps) class I : 250 mm dia (Zoloto/ Leader/ Sant/ Kirloskar)

C.I. sluice valve (with caps) class I : 200 mm dia (Zoloto/ Leader/ Sant/ Kirloskar)

C.I. sluice valve (with caps) class I: 150 mm dia (Zoloto/ Leader/ Sant/ Kirloskar)

Semi Rigid PVC waste pipe for sink and wash basin 32mm Dia. with length not less than 700mm I/C PVC waste fittings. (Prince/Supreme/Supreme)

Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings. (Prince/Supreme/Supreme)

Flexible (coil shaped) PVC waste pipe for sink and wash basin 32mm dia with length not less than 700 mm i/c PVC waste fittings. (Any ISI Marked Heavy)

Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings. (Any ISI Marked Heavy)

SS Soad dish with ceramic holder. (Jaquar/Parryware/hindware)

SS Soap dispenser with glass bottle (Jaquar/Parryware/hindware)

SS Single tower rail 450mm long (Jaquar/Parryware/hindware)

SS Towel ring with round flange (Jaquar/Parryware/hindware)

SS Double coat hook (Jaquar/Parryware/hindware)

CP Brass Short body Bib cock 15mm. (MOR-1020) (Jaquar/Parryware/hindware)

SS grating 100 mm dia (AS ISI marked)

125 mm SS grating with waste hole (AS ISI marked)

SS towel ring 215X200X37mm (Jaquar/Parryware/hindware)

SS Towel rail (600 mm) (Jaquar/Parryware/hindware )

CP Brass Bib cock long body 15mm (Jaquar/Parryware/hindware)

CP Brass Angle valve 15mm (Jaquar/Parryware/hindware)

C.P. Brass Centre Hole Basin Mixer With Cast Spout (MARC)(MOR-1100) (Jaquar/Parryware/hindware)

CP Brass Single lever telephonic wall mixer of approved make (MARC)(MOR-1120) (Jaquar/Parryware)

CP Shower head (Jaquar/Parryware)

CP Brass Health faucet set (ALD-573) (Jaquar/Parryware)

HEALTH FAUSSET GUN (ALD-573) (Jaquar/Parryware)

CP HEALTH FAUSSET STAND (Jaquar/Parryware)

Bottle Trap (Jaquar/Parryware)

CP Extension nipple 1.5”X15mm (AS ISI marked)

CP Jet Spray with 1 meter tube (PVC) (Jaquar/Parryware)

Saifon washer (Any ISI Marked Heavy Heavy)

G.I Pipe Nipple

32mm nominal bore (Jindal/Tata/Prakash/surya/Swastik)

40mm nominal bore (Jindal/Tata/Prakash/surya/Swastik)

50mm nominal bore (Jindal/Tata/Prakash/surya/Swastik)

65mm nominal bore (Jindal/Tata/Prakash/surya/Swastik)

G I Elbow

32mm nominal bore (Jindal/Tata/Prakash/surya/Swastik)

40mm nominal bore (Jindal/Tata/Prakash/surya/Swastik)

50mm nominal bore (Jindal/Tata/Prakash/surya/Swastik)

65mm nominal bore (Jindal/Tata/Prakash/surya/Swastik)

G.I End Cap

15mm MTA (Jindal/Tata/Prakash/surya/Swastik)

15mm FTA (Jindal/Tata/Prakash/surya/Swastik)

G.I Reducer Socket

25x32mm (Jindal/Tata/Prakash/surya/Swastik)

32x40mm (Jindal/Tata/Prakash/surya/Swastik)

40x50mm (Jindal/Tata/Prakash/surya/Swastik)

50x63mm (Jindal/Tata/Prakash/surya/Swastik)

G.I Union

25mm (Jindal/Tata/Prakash/surya/Swastik)

32mm (Jindal/Tata/Prakash/surya/Swastik)

40mm (Jindal/Tata/Prakash/surya/Swastik)

50mm (Jindal/Tata/Prakash/surya/Swastik)

65mm (Jindal/Tata/Prakash/surya/Swastik)

CP Extension nipple 1”X15mm (AS ISI marked)

CP Extension nipple 2”X15mm (AS ISI marked)

M-Seal (AS ISI marked)

White Metrogyl (AS ISI marked)

PVC connection washer (Watertec/Any ISI Marked Heavy)

Siphon washer (AS ISI marked)

SS connection pipe 12" (AS ISI marked)

SS connection pipe 18" (AS ISI marked)

SS connection pipe 24" (AS ISI marked)

SS connection pipe 36" (AS ISI marked)

SS connection pipe 1.5mtr (AS ISI marked)

SS X nipple 15mm (AS ISI marked)

Brass Full way valve 25mm (AS ISI marked)

SS Hex Nipple 25 mm (AS ISI marked)

Sink Coupling (AS ISI marked)

Brass extension nipple (AS ISI marked)

PVC Cistern Long Body (AS ISI marked)

PVC Cistern short body (AS ISI marked)

Brass Ball Valves

15 mm (Zoloto/ Leader/ Sant/ Kirloskar)

20mm (Zoloto/ Leader/ Sant/ Kirloskar)

25mm (Zoloto/ Leader/ Sant/ Kirloskar)

32mm (Zoloto/ Leader/ Sant/ Kirloskar)

40mm (Zoloto/ Leader/ Sant/ Kirloskar)

50mm (Zoloto/ Leader/ Sant/ Kirloskar)

65mm (Zoloto/ Leader/ Sant/ Kirloskar)

Bottle Trap washers (AS ISI marked)

CPVC (SDR-II)

CPVC 65 MM PIPE (3 meter) (Astral/AKG/Birla HIL/Supreme) (Schedule 80)

CPVC 65 MM ELBOW (Astral/AKG/Birla HIL/Supreme) (Schedule 80)

CPVC 65 MM SOCKET (Astral/AKG/Birla HIL/Supreme) (Schedule 80)

CPVC 65 MM Tee (Astral/AKG/Birla HIL/Supreme) (Schedule 80)

CPVC 65 MM UNION (Astral/AKG/Birla HIL/Supreme) (Schedule 80)

CPVC 65 MM FTA (Astral/AKG/Birla HIL/Supreme) (Schedule 80)

CPVC 65 MM MTA (Astral/AKG/Birla HIL/Supreme) (Schedule 80)

CPVC 65 MM DEAD CAP (Astral/AKG/Birla HIL/Supreme) (Schedule 80)

CPVC 65x50mm reducer (Astral/AKG/Birla HIL/Supreme) (Schedule 80)

CPVC 65x50mm reducer bush (Astral/AKG/Birla HIL/Supreme) (Schedule 80)

CPVC 80x65mm reducer bush (Astral/AKG/Birla HIL/Supreme) (Schedule 80)

CPVC 50 MM PIPE (3 meter) (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 50 MM ELBOW (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 50 MM SOCKET (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 50 MM Tee (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 50 MM UNION (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 50 MM FTA (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 50 MM MTA (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 50 MM DEAD CAP (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 50x40mm reducer bush (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 50x32mm reducer bush (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 50x25mm reducer bush (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 50x20mm reducer bush (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 40 MM PIPE (3 meter) (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 40 MM ELBOW (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 40 MM SOCKET (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 40 MM Tee (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 40 MM UNION (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 40 MM FTA (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 40 MM MTA (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 40 MM DEAD CAP (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 40x32mm reducer bush (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 40x25mm reducer bush (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 40x20mm reducer bush (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 32 MM PIPE (3 meter) (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 32 MM ELBOW (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 32 MM SOCKET (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 32 MM Tee (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 32 MM UNION (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 32 MM FTA (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 32 MM MTA (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 32 MM DEAD CAP (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 32x25mm reducer bush (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 32x20mm reducer bush (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 25 MM PIPE (3 meter) (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 25 MM ELBOW (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 25 MM SOCKET (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 25 MM Tee (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 25 MM UNION (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 25 MM FTA (Astral/AKG/Birla HIL/Supreme)(SDR 11)

CPVC 25 MM MTA (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 25 MM END CAP (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 25x20mm reducer (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 25x20mm reducer bush (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 20mm Pipe (3 meter) (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 20 mm Elbow (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 20 mm Socket (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 20*15 mm Brass Elbow (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 20*15mm Brass Tee (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 20 mm Union (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 20 mm FTA (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 20 mm MTA (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 20 mm Dead Cap (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 20*15 mm Brass FTA (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 20*15mm Brass MTA (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 15 mm Pipe (3 meter) (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 15 mm Elbow (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 15 mm Socket (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 15 mm Brass Elbow (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 15 mm Brass Tee (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 15 mm Union (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 15 mm FTA (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 15 mm MTA (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 15 mm Dead Cap (Astral/AKG/Birla HIL/Supreme) (SDR 11)

CPVC 110mm Pipe (3 meter) (Astral/AKG/Birla HIL/Supreme) Schedule 80

CPVC 110mm L-bend (Astral/AKG/Birla HIL/Supreme) Schedule 80

CPVC 110mm socket (Astral/AKG/Birla HIL/Supreme)

CPVC 110mm T (Astral/AKG/Birla HIL/Supreme)

CPVC 100x80mm reducer socket (Astral/AKG/Birla HIL/Supreme)

CPVC 100x65mm reducer bush (Astral/AKG/Birla HIL/Supreme)

CPVC 100x80mm reducer bush (Astral/AKG/Birla HIL/Supreme)

CPVC 100x50mm reducer bush (Astral/AKG/Birla HIL/Supreme)

CPVC Solvent Heavy duty (Weld On/AKG)

Teflon Tape (AS ISI marked Heavy)

Tread ball (AS ISI marked Heavy)

GI pipe tread sealent (AS ISI marked Heavy)

Pressmatic set (PRS-CHR-031) (Jaquar/Parryware)

Aerator sets (Jaquar/Parryware)

PVC Health faucet Set (including holder) (Watertec)

Health fauset lever (Jaquar/Parryware)

Health fauset Bullet (Jaquar/Parryware)

Health fauset spring (Jaquar/Parryware)

Health fauset Oring (Jaquar/Parryware)

Health fauset S.S Tube (Jaquar/Parryware)

Health fauset Gun (Jaquar/Parryware)

Diverter catridge (Jaquar/Parryware)

Moving plate (Diverter set) (Jaquar/Parryware)

Locking cap (Jaquar/Parryware)

Locking cap washer (Jaquar/Parryware)

Diverter housing (Jaquar/Parryware)

Diverter Bush (Jaquar/Parryware)

Diverter handle (Jaquar/Parryware)

40mm catridge (Jaquar/Parryware)

40mm bush's (Jaquar/Parryware)

WLM Spindles (Jaquar/Parryware)

Spindles adaptar (Jaquar/Parryware)

WLM Handles (Jaquar/Parryware)

Silicon oring (Jaquar/Parryware)

Continental spindles (Jaquar/Parryware)

Continental handels (Jaquar/Parryware)

WLM center piston set (Jaquar/Parryware)

WLM Center catridge (Jaquar/Parryware)

WLM aerator set (Jaquar/Parryware)

kubix spindles (Jaquar/Parryware)

Adapters for spindles (Jaquar/Parryware)

Diverter shower button sets (Jaquar/Parryware)

Diverter knob (Jaquar/Parryware)

40MM diverter shower buttons (Jaquar/Parryware)

40MM diverter Handles (Jaquar/Parryware)

WLM center handle (Jaquar/Parryware)

Wall mixer (Jaquar/Parryware)

Flush Plate (Roca/American standard)

Screw set (Roca/American standard)

Outlet holder (Roca/American standard)

Bracket jhula for Slendra Toilet (Roca/American standard)

PVC Flush Tank Knob Set (Parryware/Hindware/Jaquar)

CPVC 20mm (45degree bend) (Astral/AKG/Birla HIL/Supreme)

CPVC 25 mm (45degree bend) (Astral/AKG/Birla HIL/Supreme)

CPVC 32mm (45degree bend) (Astral/AKG/Birla HIL/Supreme)

CPVC 40mm (45degree bend) (Astral/AKG/Birla HIL/Supreme)

CPVC 50mm (45degree bend) (Astral/AKG/Birla HIL/Supreme)

Urinal Sensor Adaptor for Power source (Roca-RT5A8102E01) (American Standard FFAS8614-000500BF0)

Auto closing Concealed Urinal Flush Valve with wall flange (Jaquar PRS-073)

Urinal valve Auto closing system with built-in control cock & Wall Flange (Jaquar PRS-077)

Solenoid Valve (Roca-RT5A8102E01) (American Standard FFAS8614-000500BF0)

CPVC Tank Adaptor (Spigot type) 50mm (Astral/AKG/Birla HIL/Supreme)

CPVC Tank Adaptor (Spigot type) 40mm (Astral/AKG/Birla HIL/Supreme)

CPVC Tank Adaptor (Spigot type) 32mm (Astral/AKG/Birla HIL/Supreme)

CPVC End plug threaded (Astral/AKG/Birla HIL/Supreme)

PILLAR COCK 15mm (Jaquar FON-40011)

ELBOW ACTION BIB COCK (Jaquar FLR-5031N)

BUTTER FLY VALVE 100MM (CI NRV with flanged swing type with Nitrile rubber Flap) (Zoloto/ Leader/ Sant/ Kirloskar)

C.I Hubless (As per IS 15905)

75mm plain Bend 90 degrees (Neco/Hepco/Anand )

75mm plain Bend 45 degrees (Neco/Hepco/Anand )

75mm door bend (Neco/Hepco/Anand )

75mm Plain Y Joint (Neco/Hepco/Anand )

75mm Plain TEE (Neco/Hepco/Anand )

75mm End cap (Neco/Hepco/Anand )

75mm ventcoll (Neco/Hepco/Anand )

110double Y (Neco/Hepco/Anand )

110mm Plan bend 90degree (Neco/Hepco/Anand )

110mm bend 45degree (Neco/Hepco/Anand )

110mm door elbow (Neco/Hepco/Anand )

110mm plain T (Neco/Hepco/Anand )

110mm Plain Y (Neco/Hepco/Anand )

110mm door Y (Neco/Hepco/Anand )

110 X 110 X 75 Reducer Y (Neco/Hepco/Anand )

110mm End cap (Neco/Hepco/Anand )

110 P trap (Neco/Hepco/Anand )

110 Nahni trap (Neco/Hepco/Anand )

110 gally trap (Neco/Hepco/Anand )

150mm Plan bend 90degree (Neco/Hepco/Anand )

150mm bend 45degree (Neco/Hepco/Anand )

150mm door elbow (Neco/Hepco/Anand )

150mm plain T (Neco/Hepco/Anand )

150mm door T (Neco/Hepco/Anand )

150mm Plain Y (Neco/Hepco/Anand )

150mm door Y (Neco/Hepco/Anand )

150 X 150 X 100 Reducer Y (Neco/Hepco/Anand )

150mm End cap (Neco/Hepco/Anand )

150mm door piece (Neco/Hepco/Anand )

150x150x110 door T (Neco/Hepco/Anand )

110WC Pan connector (Astral/Supreme)

C.I. SS coupling for CI Pipe.

75mm (Neco/Hepco/Anand)

110mm (Neco/Hepco/Anand)

150mm (Neco/Hepco/Anand)

MS Brackets (580mm, 810mm & 1045mm) (AS ISI marked)

Dashfastners 10mm (AS ISI marked)

Treading rods 10mm (AS ISI marked)

10mm nuts and vochers (AS ISI marked)

Universal Clamps

20mm (As ISI Marked)

25mm (As ISI Marked)

32mm (As ISI Marked)

40mm (As ISI Marked)

50mm (As ISI Marked)

65mm (As ISI Marked)

80mm (As ISI Marked)

100mm (As ISI Marked)

150mm (As ISI Marked)

U Blots

20mm (As ISI Marked)

25mm (As ISI Marked)

32mm (As ISI Marked)

40mm (As ISI Marked)

50mm (As ISI Marked)

65mm (As ISI Marked)

80mm (As ISI Marked)

100mm (As ISI Marked)

150mm (As ISI Marked)

CI HUB Rainwater Pipe

100mm CI single socket (Neco/Hepco/Anand)

75mm CI single socket (Neco/Hepco/Anand)

150mm CI single socket (Neco/Hepco/Anand)

200mm CI single socket (Neco/Hepco/Anand)

100mm plain bend single socket (Neco/Hepco/Anand)

100mm bend 45 degree single socket (Neco/Hepco/Anand)

100mm heel rest bend (Neco/Hepco/Anand)

150mm heel rest bend (Neco/Hepco/Anand)

150mm plain bend (Neco/Hepco/Anand)

100mm coller (Neco/Hepco/Anand)

150mm coller (Neco/Hepco/Anand)

C.I. grating 150 mm dia. (Weighing not less than 440 gm (Neco/Hepco/Anand)

MS Holder Bat Clamps

100mm (Approved Make)

150mm (Approved Make)

Total hardness test kit (Aquasoal/Ion exchange)

Alkalinity test kit(AE214) (Aquasoal/Ion exchange)

PH indicator paper 1.0-14.0 (Aquasoal/Ion exchange)

HDPE 110 (6 Meter) (Oriplast/Nagarjuna)

PPR Union 20 mm (SFMC/Supreme)

PPR Union 25 mm (SFMC/Supreme)

PPR Union 32 mm (SFMC/Supreme)

PPR Union 40 mm (SFMC/Supreme)

PPR Union 50 mm (SFMC/Supreme)

PPR Union 63 mm (SFMC/Supreme)

PPR 20MM (4Meter) (SFMC/Supreme)

PPR 25MM (4Meter) (SFMC/Supreme)

PPR 32MM (4Meter) (SFMC/Supreme)

PPR 40MM (4Meter) (SFMC/Supreme)

PPR 50MM (4Meter) (SFMC/Supreme)

PPR 63MM (4Meter) (SFMC/Supreme)

PPR 75MM (4Meter) (SFMC/Supreme)

PPR 90MM (4Meter) (SFMC/Supreme)

PPR 110MM (4Meter) (SFMC/Supreme)

PPR Elbow 90-D

20mm (SFMC/Supreme)

25mm (SFMC/Supreme)

32mm (SFMC/Supreme)

40mm (SFMC/Supreme)

50mm (SFMC/Supreme)

63mm (SFMC/Supreme)

75mm (SFMC/Supreme)

90mm (SFMC/Supreme)

110mm (SFMC/Supreme)

PPR Elbow 45-D

20mm (SFMC/Supreme)

25mm (SFMC/Supreme)

32mm (SFMC/Supreme)

40mm (SFMC/Supreme)

50mm (SFMC/Supreme)

63mm (SFMC/Supreme)

75mm (SFMC/Supreme)

90mm (SFMC/Supreme)

110mm (SFMC/Supreme)

PPR Socket

20mm (SFMC/Supreme)

25mm (SFMC/Supreme)

32mm (SFMC/Supreme)

40mm (SFMC/Supreme)

50mm (SFMC/Supreme)

63mm (SFMC/Supreme)

75mm (SFMC/Supreme)

90mm (SFMC/Supreme)

110mm (SFMC/Supreme)

PPR Tee

20mm (SFMC/Supreme)

25mm (SFMC/Supreme)

32mm (SFMC/Supreme)

40mm (SFMC/Supreme)

50mm (SFMC/Supreme)

63mm (SFMC/Supreme)

75mm (SFMC/Supreme)

90mm (SFMC/Supreme)

110mm (SFMC/Supreme)

PPR End Cap

20mm (SFMC/Supreme)

25mm (SFMC/Supreme)

32mm (SFMC/Supreme)

40mm (SFMC/Supreme)

50mm (SFMC/Supreme)

63mm (SFMC/Supreme)

75mm (SFMC/Supreme)

90mm (SFMC/Supreme)

110mm (SFMC/Supreme)

PPR Union

20mm (SFMC/Supreme)

25mm (SFMC/Supreme)

32mm (SFMC/Supreme)

40mm (SFMC/Supreme)

50mm (SFMC/Supreme)

63mm (SFMC/Supreme)

PPR Elbow MTE 90D / Male Threaded T

20X15 (SFMC/Supreme)

20X20 (SFMC/Supreme)

25X15 (SFMC/Supreme)

25X20 (SFMC/Supreme)

32x20 (SFMC/Supreme)

32x25 (SFMC/Supreme)

50X32 (SFMC/Supreme)

20X15 (SFMC/Supreme)

20X20 (SFMC/Supreme)

25X15 (SFMC/Supreme)

25X20 (SFMC/Supreme)

32X20 (SFMC/Supreme)

32X25 (SFMC/Supreme)

PPR Elbow FTE

20X15 (SFMC/Supreme)

20X20 (SFMC/Supreme)

25X15 (SFMC/Supreme)

25X15 HW (SFMC/Supreme)

25X20 (SFMC/Supreme)

32X15 (SFMC/Supreme)

32X20 (SFMC/Supreme)

32X25 (SFMC/Supreme)

Reducing Elbow (25mmX32mm) (SFMC/Supreme)

Reducing Elbow (40mmX25mm) (SFMC/Supreme)

Reducing Elbow (40mmX32mm) (SFMC/Supreme)

Reducing Elbow (50mmX40mm) (SFMC/Supreme)

PPR Elbow FTE

25mm (SFMC/Supreme)

32mm (SFMC/Supreme)

40mm (SFMC/Supreme)

Please Enable Macros to View BoQ information