Repair work of approach road on Hartmann overhead bridge in Bareilly district (NCAP) FY 2026-27

Providing and applying tack coat with bitumen using VG-10 pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.

Providing and laying bituminious concrete with 100-120 batch type HMP producing an average output of 75 tonne per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.40% as per job mix, and filler, transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT & H Specifications Clause 509 complete in all respects.

Dismantling of foundation concrete including stacking of dismantled materials as directed by the Engineer-in-Charge within a distance of 60 mt., (200 ft.) (SI no. 696b)

RCC Grade M25- Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. 1500, 1700 & 2100

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. SI.(As per D.S.R No. 13.26)

Applying one coat of cement primer of approved brand and manufacture on wall surface. (SL. No 13.43.1)

New work (Two or more coat applied @ 1.67 Itr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10sqm.) (SL. No 13.46.1)

Apply priming coat over new steel and other metal surface after and including preparing the surface throughly cleaning oll grease dirt and other foreign matter and scoured with wire brushes, fine steel/wood scrappers sand papering and knotting including cost of all materials, labour abd T&P etc required for proper completion of the work. (SI .No. 1)

Painting first coat over priming coat(but excluding cost of priming coat) on wood or steel and other metal surface with superior synthetic enamel standard make brushing to give an even shade and finish and including cleaning the surface of all dirt dust and other foreign matter sand papering and stripping including cost of all materials,labour, T&P etc required for the proper completion of the work. but on previously painted old surface with paint of & but for every subsequent coat after first coat on wood or steel surface with paint of: Medium Quality (SI .No. 2 + 3)