ADDITION / ALTERATION AND RENOVATION TO BUILDING NO. P-6 AND P-16 AT ICGAE UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

M & L Porbandar stone masonry, well bonded, bedded and solidly hearted built in CM 1:6 all as specified and as directed by Engineer-in-charge.

M&L Reinforced cement concrete, Type A1, 1:1.5:3 (20 mm graded aggregate) in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and as directed.

M&L Reinforced cement concrete, Type A1, 1:1.5:3 (20 mm graded aggregate) in slab supported on walls, complete all as specified and as directed.

M&L for RCC M-30 (using 20mm aggregate) for chajjas, complete ass as specified and directed.

Form work to sides and soffits of floor or roof beams, beam haunching,lintel etc.

Form work to soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work not exceeding 200 mm thick in flat surface.

Formwork to chullah hoods, chajjas, troughs and similar items including edges as in rough finished surfaces of concrete complete all as specfied and directed.

S&F Mild steel TMT bars (CRS) 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips.

-ditto- all as per item No. above, but 6mm to 8mm dia. complete all as specified and as directed.

-ditto- all as per item No. above, but 5mm dia and over upto 10mm dia as in stirrups, spacers and binders

M&L for rendering 15mm thick, cement plaster, in cement mortar (1:4) mixed with integral water proofing compound as per manufactures instruction, on roof slab surfaces finished even and smooth without using extra cement,complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately)

M&L for providing APP based membrane course roof treatment in layers with following provisions:- (i) Applying one coat of bitumen's primer polymerized primer oil based coat, evenly @ 0.3KG/Sqm as priming coat to the prepared surfaces, till the surfaces is properly impregnated and the solvent oil in the base primer shall be allowed to evaporated completely. (ii) Applying APP based pre-fabricated with non woven polyester reinforced membrane stabilized with fibre glass strands and top with grey mineral slates 3mm thick and weight not less than 3.50 Kg/Sqm by torch application method. (iii) Applying a coat of solar reflective bituminous aluminium paint @ 0.10Kg/Sqm over mineral surface.

M&L for rendering 10 mm thick on fair face of brick work or concrete surfaces in CM 1:6 finished even and smooth wiithout using extra cement.

M&L for rendering 15mm thick, cement plaster, in cement mortar (1:4) mixed with integral water proofing compound as per manufactures instruction, on fair faces of brick walls or concrete surfaces finished even and smooth without using extra cement in any height, complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately)

Supply only water proofing compound (integral) all as specified & directed.

M&L for rendering 5mm thick cement plaster in cement mortar 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement on ceiling in any height complete all as specified and directed.

M&L for PCC (1:2:4) type B1 using 20 mm graded aggregate as in floor of average 40mm thick including preparation of existing surface.

M&L Vitrified light shade, Double charged ceremic tiles 9 mm thick (square/rectangular) polished area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick 1:6 complete all as specified and as directed by Engineer-in-charge.

Ditto as above but in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat of mortar 10 mm thick 1:4 complete all as specified and as directed by Engineer-in-charge.

M&L 18mm to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed or bedding layer of 15 mm thick 1:6 etc. complete all as specified and as directed by Engr-in-Charge

S&F Roof trusses (framed), trussed, purlins, crane gantres, rails and fasteings and heavy bracket framing (Beam, tee, angle, channel or flat, sections) including distance pieces, cleats etc. Fe 410-W 9Gde-E-250) Quality A complete all as specied and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but n.exc 4 sqm.

M&L 2nd class hard wood bullnosed, splayed, chamfered or rounded on one edge or face fillets of sectional area exceeding 3 sq.cm but n. exc 6 sq.cm clean sawn, secured with nails or brads.

S&F 2nd class hard wood plain,solid,straight chowkats and frames,wrought,framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engineer-in-Charge.

S&F 2nd class hard wood Transomes or mullions,straight for solid frames of any discription,wrought,framed rebated on the solid,rounded or chamfered,put together with glue pinned at joints complete all as specified and as directed by Engineer-in-Charge.

M&L Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L for 12mm thick Gypsum Board seamless Ceiling as in curved, sunken or raised surface of any design as approved and finishing the surface fair by filling the joint with POP and two coats of OBD ,inlcuding GI frame work for curved, sunken or raised for any design as approved as in ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre fixed with hanger of GI channel made out of GI channel used in ceiling as above upto 1200 mm length in roof slabs by means of ceiling cleats complete all as specified and directed by Engr-in-charge

M&L for 12mm thick Gypsum Board seamless Ceiling as in flat surface, finishing the surface fair by filling the joint with POP and two coats of OBD inlcuding GI frame work as flat surface approved as in ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre fixed with hanger of GI channel made out of GI channel used in ceiling as above upto 1200 mm length in roof slabs by means of ceiling cleats complete all as specified and directed by Engr-in-charge

Providing and fixing Aluminum Composite panels in all colours of approved brand for external / internal wall cladding at all heights and elevations including necessary aluminium composite panel consist of 3mm thermoplastic core of anti oxidant LDPE sandwitched between two skin of 0.5 mm thick alloy sheet making a total sheet thickness of 4 mm. The surface shall be finished with PDVF base coating on the top side and service coating on the reverse side shall be with a polymer paint. The system to be fixed to the brick/stone/masonry/RCC walls/framed structure with necessary clamps, bracket and anchor fasteners fixed over and including base frame fabricated with aluminium square pipe of size 25mmx25mm with 1mm thickness in 600mmx600mm size grid including stainless steel screws, nut, bolts, washers, cleats, weather silicone sealent for groove filling, backer rods etc, complete all as per Manufacturer instruction and all as specified and as directed by Engr-in-Charge. All Clamps and brackets shall be hot dip galvanised minimum 80 micron thick and confirmed to IS : 4759 - 1996. The extruded aluminium sections shall be anodised in approved colour with anodic coating minimum 20 microns. (items include cost of aluminium frame, ACP , Cramps, weather sealent, gasket, foam, fixtures, scaffolding, all machineries and any other fastening streps, nuts, bolts, rivets, washers, etc complete). The manufacturer shall also give guarantee/warranty for ACP for a period of Five years. Notes: a) The Contractor should have working experience of similar nature of work for last three years. b) The ACP should have installed by authorized company/agent. Make of ACP:- ALUPEX/ALUDECOR/ALSTRONG/TIMEX

S&F of 12 mm thick Toughned Glass Door with patch fittings including Decorative type Stainless steel 304 grade floor Spring, fixing/moving arrangement at top, Stainless steel 2 Nos H Type Handles of 450 MM suitable size as directed, Fin Connect Patch Lock etc in each door, including cutting holes in any size in floor and wall complete all as specified and as directed by Engineer-in-Charge.

S&F of 12 mm thick Toughned Glass as in Partition /window with patch fittings of SS316 Grade, necessay accessories etc, including cutting holes in any size in floor and wall,and sealing joint with sealing compound complete all as specified and as directed by Engr-in-Charge

M&L preparation of new plastered or unplastered surfaces and applying two coats of interior emulsion paint on wall over a coat of alkali resistant primer over two coat of wall care putty (water proof) with smooth roller finish complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/ltrs and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as per the manufacturers instructions, complete all as specified and directed by Engr-in-charge.

M&L Preparation of old plastered wall surfaces and applying one coat of acrylic emulsion exterior grade (100%) complete all as specified and as directed

M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of wooden surfaces exceeding 10 CM girth or width

Material and labour for preparation of steel surfaces exceeding 10 cm with or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall bore of the pipe 110 mm.

S&F PVC (SWR) bends any radius 110 mm dia.

Demolition of brick or stone/ boulder masonry, built in cement mortar complete all as specified and as directed

M&L coloured glazed ceremic tiles of size 450x300x7 mm thick in vertical surfaces such as skirting,dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat in 10 mm thick 1:4 including dismantling existing tiles complete all as specified and as directed by Engineer-in-charge.

M&L Non skid coloured ceremic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick 1:6 including dismantling complete all as specified and as directed by Engineer-in-charge.

Dismantling of stone slabs and tiles of any description or thickness in floors laid ,bedded and pointed in any mortar etc complete all as specified and as directed

M&L 18mm to 20mm thick Makrana white Marble work (table rubbed and polished) in floors,steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over screed bed or bedding layer of 15 mm thick 1:6 etc. complete all as specified and as directed by Engr-in-Charge

M&L 18mm to 20mm thick black Marble work (table rubbed and polished) in floors,steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over screed bed or bedding layer of 15 mm thick 1:6 etc. complete all as specified and as directed by Engr-in-Charge

Supplying and laying of CPVC pipes of size 25 mm outer dia SDR-11 & Plain CPVC SDR 11 fittings fixed complete to walls, ceilings or in floors. complete including dismantling all as specified and as directed.

All as per above but 20 mm outer dia

S&F 1000 ltrs capacity Rotational moulded polyethelene water storage tanks,three layered (cylindrical vertical with closed top) hoisted and fixed in position, including provision of 25 mm bore and 150 mm long GI nipples for inlet,outlet,drain outlet pipes along with check nuts, and high pressure brass ball valve,rod with polythene float of suitable size including taking down of existing tank and remove to store as directed by the Engineer-in-Charge.

S&F EWC one piece with integrated cistern with soft closing seat cover and twin flush fittings size 690 x 375 x 785 ,white in colour, Make - Prayag (Cat pat No - 4364) complete all as specified and directed by GE.Fixed in repair

S&F Vitreous china wash basin, white, size 600 x 360x 95 mm including waste pipe, complete all as specified and as directed by Engr-in-Charge, fixed in repair. Make: Prayag (Cat Pat No : 4703) or equivalent from makes given in list of makes.

S&F in repair Single Lever Basin Mixer w/o Popup waste system with Make : Prayag (Cat pat No 6851 or equivalent as approved by the GE

S&F 15mm bore Bib taps, with flange chromium plated cast copper alloy with capstan head complete all as specified and as directed by Engr-in-Charge, fixed in repair. Make : Prayag (Cat Pat No-8306) or equivalent from makes given in list of makes.

S&F Shower panel complete all as Specified. Make : Jaquar Selfi ( standard) or equivalent model as approved by Engr-in-Charge

S&F 15mm Angle Cock, fancy type, brass chromium plated, screwed down, high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engr-in-Charge, fixed in repair. Make : Prayag (Cat Pat No-8510) or equivalent from makes given in list of makes.

S&F Tubular towel Rail CP Brass, chromium plated D type, 600 mm long between flanges complete all as specified and as directed by Engr-in-Charge, fixed in repair. Make : Prayag (Cat Pat No-BA-40 or or equivalent from makes given in list of makes.

S&F Health Faucet square with 1 mtr tube and hook complete all as specified and as directed by Engr-in-Charge, fixed in repair. Make : Prayag (Cat Pat No-BEA-85) as approved by Engr-in-Charge

S&F Glass Shelf 500 x 60mm (with ABS Brackets) 450 x 125 x 6mm complete all as specified and as directed by Engr-in-Charge, fixed in repair. Make : Prayag (Cat Pat No- BEA-47) or equivalent from makes given in list of makes.

S&F Corner Glass Shelf 300mm (with ABS Brackets) 300 x 600mmcomplete all as specified and as directed by Engr-in-Charge, fixed in repair. Make : Prayag (Cat Pat No- BEA-46) or equivalent from makes given in list of makes.

S&F Toilet Paper Holder, complete all as specified and as directed by Engr-in-Charge, fixed in repair. Make : Prayag (Cat Pat No BA-18) or equivalent from makes given in list of makes.

S&F Soap Dispenser holder , Make : Prayag (Cat Pat No BA-83) or equivalent as approved by GE

S&F 15 mm dia PVC connections with PTMT nuts of length 600 mm

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors.

S&F 75 mm bore PVC bends any radius

S&F 75 mm bore PVC (SWR) floor trap,plain with grating incl jointing to waste pipe with solvent cement.

Taking down chowkats or frames with shutters (without taking off shutters from frames) size n. exc 1.5 sq mtr each complete all as specified and as directed by Engr-in-Charge

S&F powder coated aluminium anodised three track sliding window shutter and frame including jointing clit for fixing frame/chowkhat of window as per JINDAL section code (frame 20831), shutter (20846) including glazing with 5mm thick tinted glass & Aluminium wire mesh necessary fittings, rubber packing, suitable handles, rollers for shutters etc complete all as specified and as directed.

S & F Aluminium anodised grill (thickness of anodising minumum 15 micron) with and including suitable aluminium anodized 'F'/ 'H' section frame 23.40 x 15.30 x 1.40 mm thick with aluminium rebated/ screwed attachment complete all as specified and directed in following situation :- (Note : (i) Aluminium grill shall be of 'Deco grill' of M/s ELESAR FOCCHI Ltd as per Design No. DG102, 7.50 mm x 6 mm and weight shall not be less than 3.131 Kg/ Sqm or approved design in M/s Royal Grill/ National Grill/ Alumigrille of M/s Alumi Profiles Pvt. Ltd, Chandramukhi Basement, Nariman point, mumbai.

S&F Float glass 5.5mm thick plain provided to aluminium frame for door/window/partition with necessary aluminium powder coated snap beading and rubber gasket/packing complete all as specified and directed by Engr-in-Charge

S & F 4mm thick both side aluminuium decoretive sheet laminated partation pannel for door shutter / Partation with necessary aluminium powder coated snap beading and rubber gasket/packing complete all as specified and directed by Engr-in-Charge

Supply and fixing Godrej night latch seven levers suitable for 20mm to 35mm thick doors in repairs.

M&L for 18mm thick Marine plywood, grade BWP, type BB with both side 0.9mm thk decorative choice laminate type 1 of surface finish, colour and pattern as approved i, fixed with approved adhesive as per manufacturer's instruction,fixed with screws to timber frame work including 1st class HW lipping alround the shutter/edges and polishing etc complete as directed by engineer In Charge.

S&F for 30mm thick Flush shutters, solid core construction, with particle board core,and plywood face panels, comercial type on both side, complete all as specified.

M&L for 0.9mm thick decorative laminate type 1 of surface finish, colour and patters as approved, fixed with approved adhesive as per manufacturer's insturctions, complete all as specified.

S&F of decorative type vertical blind of any colour and size width 1.50 mtr and height 1.20 mtr suitable for window complete all as specified

S&F 100 mm long Stainless steel Butt hinges

S&F Aluminum anodized barrel tower bolt of extruded section 200mm long complete all as specified and as directed

S&F extruded aluminium alloy handle fabricated type anodized 150mm long complete all as specified and as directed

S & F Aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F door stopper aluminium anodized white dale 40mmx40mm and 2mm thick dia 150mm having rubber bash 25mm dia long (high) at end the sheet/fixed to door shutter with steel cadmium places scrrew all as specified

S&F 150 mm brass handles, cast type polished bright

S&F 30 mm width of flaps Continuous piano hinges, brass, bright finish or electrogalvanised

M&L for Roof tiles, Mangalore pattern, bedded and jointed in CM 1:6 including dismantling of tile complete all as specified and directed.

Taking down cement plaster of any description complete all as specified and directed.

M&L preparation of new plastered or unplastered surfaces and applying two coats of oil bound distemper on wall over a coat of alkali resistant primer over two coat of wall care putty (water proof) on ceiling complete all as specified and darected.

Complete removal of existing treatment of walls and applying two coats of interior emulsion paint over a coat of alkali resistant primer over 2 coats of wall care putty (water proof) with smooth roller finish complete all as specified and directed.

M&L Prepation of old decorated wall surface for receiving textured paint with following layers of treatment. (a) Apply one coat of primer to the prepared surface using white. (b) Apply external wall care putty (minimun 3mm thick) and prepare the surface to an even and smooth finish, check the surface to a true level surface and rectify the dents, if any noticed, before applying subseqent coats. (c) Apply one coat of primer on putty surface using white cement. (d) Apply a base coat of texture paint as per manufactures. (e) Apply a finishing coat of textured paint and creat the design as approved by Engineer in Charge.

M&L 15 mm thick wooden flooring with teak wood in floor & skirting with 12 mm thick plywood in base including polishing, complete all as specified and as directed by Engineer-in-charge.

Point wiring complete with 1.5 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 650/1100 Volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit (minimum 20 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall or ceiling etc including 1.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame of required module for mounting of modular switches, sockets, switch sockets, fan regulators with required modules all as specified etc for the following:-

(a) One light/fan point controlled by one, one way switch

(b) One 3 pin 6 Amps socket outlet on same board

(c) One 3 pin 6 Amps socket outlet on independent board .

Point wiring complete with 2.5 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 650/1100 Volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit (minimum 20 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall or ceiling etc including 1.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame for modular switches, sockets, switch sockets for one 3 pin 15 or 16 Amps on independent board with required modules all as specified. insulated but unsheathed multistrand copper conductor FRLS cabel 650/1100 Volts grade conforming to IS-694 drawn through PVC conduit (minimum 20 mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR Part I) ISI marked with wall thickness not less than 1.8 mm heavy duty including conduit accessories concealed pressed steel terminal boxes of size cover white/coloured including 1.5 Sqmm PVC insulated but unsheathed copper conductor FRLS cable as earth continuity wire for one 3 pin 15 or 16 Amps socket outlet on independent board as specified. Note for item no 92.00 & 93.00 :- Cost of cutting / chasing on wall and making good after repair deemed to be included in unit Rate.

Material & labour for Sub main wiring with two runs of 4.0 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 Volts grade cable,fire retardant low smoke drawn through and including PVC concealed conduit heavy duty grade ISI marked 25 mm dia (external) but shall be increased as per actual site requirement in accordance,with wall thickness not less than 1.8 mm complete with all necessary fitting and including with conduit accessories and one run of 4.0 Sqmm single core PVC insulated but unsheathed multistranded copper conductor 1100 volts grade cable fire retardant low smoke as earth wire conductor, fixed on wall/ceiling including taking down old unserviceable sub main wiring complete all as specified and as directed Note :- Cutting chases for fixing of concealed conduit will measured and paid separetely.

S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amps MCB complete all as specified and as directed. Make : ABB/Legrand/C&S.

S & F Sheet metal enclousure Double door for MCB DB single pole and neutral 12 way complete all as specified and as directed.

Supply,and fixing MCB SP 6-32 Amp complete all as specified

Supply,and fixing MCB SPN 6-32 Amp complete all as specified

S & F 11W Recess mounted die cast aluminium downlighter with high transmission diffuser of Make: Wipro (Helix Cat no:LD91-141-XXX-65-XX*)or its equivalent included all as spd and directed.

Supply & fix modular switch 1 way, 6 Amps, 1 modular (ISI marked).complete all as specified and as directed.

Supply & fix modular switch 1 way, 16 Amps, 1 modular (ISI marked).complete all as specified and as directed.

Supply & fix modular socket, 6 Amps, 2/3 pin combind 2 module (ISI marked).complete all as specified and as directed.

Supply & fix modular socket, 6/16 Amps, 2/3 pin combind 2 module (ISI marked).complete all as specified and as directed.

Supply and install hi wall split Air conditioner of capacity 1.5 Ton with indoor/outdoor units with high cooling performance Inverter type BEE 5 Star rated 230V/50Hz single phase supply with rotary compressor suitable for ambient temprature 52`C with premium LCD remote with display complete all as specified and directed. Make :Blue star or equivalent in Hitachi/Voltas. Note:- (i) Fixing indoor unit including cutting of hole by core cutting and cutting as bracing as required at site is deemed to be including quantity rates. (ii) Installation of outdoor unit with stand and fixing on wall/roof top is deemed to be included in the quoted rates. (iii) Filling of refrigent gas as per manufacturer recommendation if neccesary will be done by the contractor without any extra cost. (iv) Provision of drain out PVC flexible pipe from indoor AC unit to the nearest drain line as per site requirement.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and all as specified and directed. Make : Havells/Bajaj/Crompton

Earthing complete with galvanised steel pipe electrode, 40mm bore,medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 3 to the earthing test point all as specified and indicated including testing on completion

S & F 12W Recess mounted die cast aluminium downlighter Mollis RF with high performance and efficiency, flush diffuser for volumetric lighting, suitable for refurbishment projects, IP40 and integrated electronic driver with high efficiency long life LED chips, PF>.90, System luminous efficiency >80, Operating voltahge 140V-270V, 50/60Hz including electrical connection with 3 core flexible Cu conductor cable of appropriate size Complete all as specified and directed. Make : Wipro (Cat No:LD06-151-XXX-57-RF*) or equivalent in GE/Philips.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete and all as specified and directed.Make : Wipro/Philips/Cropmton.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make : Philips/Wipro/CG.

Taking down existing point wiring along with acessories all as spd Note :- making good existing disturbed surface deemed to be included in unit rate

Taking down MCB DB including MCB of any type and size all as specifed

Taking down ceiling fan painting with synthetic enamel paint by sparay M/c including filling cavities with filler , one coat after cleaning all as directed and hanging after repair and connecting with cable allas spd

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m and connecting with and including 1.5 Sqmm copper coduct PVC insulated and PVC sheathed three core cable complete all as specified and as directed. Make : Bajaj/Havells/Crompton

Supply,and fixing in replacement Distribution Board Triple pole and neutral 4 way with standard bus bar , Din bar , etc Double door all as spd Note:- Cost of cutting and modification in false ceiling deemed to be included in unit rate

S& F MCCB 3 Pole .415 V. fixed type,25 to 100 Amps with breaking capacity 16 KA

Supply and fix electric water heater, storage type inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, with Anchor fastners of suitable size and includign flexible hot/cold connection pipe -02 Nos, complete all as specified and directed. Make : JAQUAR Model, ELENA MANUAL 25 LTR/Racold Model. Andris Uno 25/ AOsmith Model. Finesse.

Taking down of oudoor/indoor unit of split type AC of capacity 1.5 ton by duly dismantling copper coil,electrical connections mounting etc. and reinstalling the same in new position with replacement MS bracket, and toping up of refrigerant gas and other items as per site requirement complete all as specified and as directed.

M&L for suction and discharge copper tubing of size 5/8" & 3/8" including bracing complete all as specified and directed.

Supply and install hi wall split Air conditioner of capacity 1.5 Ton with indoor/outdoor units with high cooling performance Inverter type BEE 5 Star rated 230V/50Hz single phase supply with rotary compressor suitable for ambient temprature 52`C with premium LCD remote with display complete all as specified and direccted. Make : Blue Star or equivalent in Hitachi/Voltas. NOTE : (i) Fixing indoor unit including cutting of hole by core cutting and cutting as bracing as required at site is deemed to be including quantity rates. (ii) Installation of out door unit with stand and fixing on wall/roof top is deemed to be included in the quoted rates. (iii) Filling of refrigent gas as per manufacturer recommendation if neccesary will be done by the contractor without any extra cost. (iv) Provision of drain out PVC flexible pipe from Indoor AC unit to the nearest drain line as per site required.

Supply and install hi wall split Air conditioner of capacity 2 Ton with indoor/outdoor units with high cooling performance Inverter type BEE 5 Star rated 230V/50Hz single phase supply with rotary compressor suitable for ambient temprature 52`C with premium LCD remote with display complete all as specified and direccted. Make : Blue Star or equivalent in Hitachi/Voltas. NOTE : (i) Fixing indoor unit including cutting of hole by core cutting and cutting as bracing as required at site is deemed to be including quantity rates. (ii) Installation of out door unit with stand and fixing on wall/roof top is deemed to be included in the quoted rates. (iii) Filling of refrigent gas as per manufacturer recommendation if neccesary will be done by the contractor without any extra cost. (iv) Provision of drain out PVC flexible pipe from Indoor AC unit to the nearest drain line as per site required.

V D JADEJA

Harsh Infrastructure

K K Construction Co

fakhrie apostrical

KRISHNA ENGINEERING

jitendra c joisar

SURAJ ENTERPRISE