Construction of science lab at 2nd floor of existing building at Gundlav Primary school At.Gundlav Ta.Dist. Valsad Under CSR initiative by DGVCl 2025-26

NAME OF WORK : Construction of science lab at 2nd floor of existing building at Gundlav Primary

school At.Gundlav Ta.Dist. Valsad Under CSR initiative by DGVCl 2025-26.

DAKSHIN GUJARAT VIJ COMPANY LIMITED, SURAT.

Descriprion Qty Unit 1% Labour Amount in Rs.

1 Demolition of brick work and stone masonry incl. stacking 10.00 CMT 564.16

of serviceable materials and disposal of unserviceable

materials with all lead and lift (ii) In cement mortar.

2 Demolition including stacking of serviceable materials and 2.00 CMT 1,084.30

disposal of unserviceable materials with all lead and lift For

3 Dismentalling tiles or stone floors laid in mortar including 80.00 SMT 49.41

stacking of serviceable materials and disposal of

underserviceable materials with all lead and lift.

4 Providing TMT FE - 500/500D bar reinforcement for 4,000.00 Kg 76.21

R.C.C. work including bending binding and placing in

position complete up to floor two level.

5 Providing laying controlled cement concrete M-250 work 9.00 Cumt 6,537.73

with curing complete including the cost of form work and

excluding the rate of reinforcement for reinforced concrete

work in. ( B ) Slabs, landing, shelvas, Balconies etc

6 ( C-1 ) Beams, Girders and cantilever 8.00 Cumt 6,157.97

7 (D-1 ) Columns, pillars posts and struts square, 6.00 Cumt 7,298.26

rectangular, polygonal in plan upto plinth level

8 ( F ) Lintels 2.00 Cumt 7,079.09

9 ( G ) Chhajja 1.00 Cumt 6,667.01

10 ( I ) Coping 2.00 Cumt 5,937.79

11 Masonary work using Aerated light weight concrete block having 22.00 Cumt 4,793.54

crushing strength not less than 35 kg/sqcm for super structure

above plinth level upto floor two level in cement mortar 1:5 (

cement : 5 fine sand ) complete as per Technical Specification

12 Half brick masonry in common brunt clay building bricks 29.00 Sqmt 639.19

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth+xtra for half brick masonry in

superstructure above plinth level upto floor two level. (A)

13 Wooden Door 6.00 Sqmt 5,338.30

Providing and fixing 35 mm thick shutters for Doors, and

clerestory windows including Indian teak wood frames

cm x 7 cm. size including anodized aluminium fixtures and

fastenings including primer coat of approved quality and

two coats of oil painting etc, complete. (ii) Fully Panelled.

Descriprion Qty Unit 1% Labour Amount in Rs.

14 Wooden Window 10.00 Sqmt 2,140.33

Providing and fixing 35 mm thick shutters for windows

and clerestory windows including Indian teak wood frames

10 cm x 7 cm. size including anodized aluminium fixtures

and fastenings including primer coat of approved quality

and two coats of oil painting etc, complete. (ii) Fully

15 Providing and fixing M.S. grills of required pattern to 250.00 Kg 104.04

wooden frames of windows etc. with M.S. flats at required

spacings and frame alround, square or round bars with

round headed bolts and nuts or by screws. (A) PLAIN

16 Providing and fixing in position collapsible steel shutters 1.50 Q 5,785.56

with vertical channels 20 x 10 x 2 mm braced with flat iron

diagonals 20 x 5 mm size with top and bottom rails of

T_rin 40x 40 x 6 mm with 38mm dia, steel pulleys

complete with bolts, nuts, locking arrangements, stoppers

handles including applying a priming coat of red lead paint.

17 Providing and fixing M.S. fan clamps tube 1 of 16 m.m. dia 8.00 Nos. 129.49

M.S. bar bent to shape with hooked ends to R.C.C. slabs

during laying including painting the exposed portion of the

loops all as per standard design complete.

18 Providing and fixing wooden openable shutter with inner 40.00 Smt 2,727.00

plywood surface covered by 1mm th. SF laminate finish

using 18mm thick plywood shutter including teakwood

liping, SS conciled handle, sliding lock & necessary

hardware materials etc. inside and liping french polish

finish complete in all respects by engineer in charge

19 Providing 15 mm. thick cement plaster in single coat on 145.00 Sqmt 153.20

fair side of Brick/concrete walls for interior plastering

upto floor two level and finished even and smooth in :

[ii] Cement mortar 1:4 [1 cement: 4 sand)

Ground Floor…..

20 Extra for Finishing with a floating coat of neat cement 145.00 Sqmt 48.21

Upto Floor Two level.

Ground Floor…..

21 Providing & applying 10 mm thick cement plaster in single 86.00 Sqmt 140.95

coat on fair side of Ceiling surface/ Sloping Roof etc.

for Ground Floor upto floor two levels finished even and

smooth in C.M. 1:4 (1 cement : 4 Sand ) including

necessary curing, scaffolding, .....

Descriprion Qty Unit 1% Labour Amount in Rs.

22 Providing & applying 20mm thick sand faced cement 191.00 Sqmt 300.66

plaster on walls upto 10m height from ground level

consisting of 12mm thick backing coat of C.M. 1:3 (1

cement : 1 sand ) and 8mm thick finishing coat of C.M. 1:1

(1 cement : 1 sand) including curing.....

23 Providing and fixing 150 mm wide, approved quality 92.00 Sqmt 105.04

chicken wire mesh at junction of brick work and RCC

work or two dissimilar surfaces, at all heights fixed by

nails, rowal plugs or tag by cement mortar 1:3 before

applying the plaster, including curing.....

24 Providing throating or plaster drip and moulding to RCC 37.00 Rmt 42.17

25 Providing cement vata ( 10 cm x 10 cm size ) quarter 73.00 Rmt 23.68

round in cement mortar 1:1 including neat cement

finishing, watering etc. complete…..

26 Admixture cost of Xypex admix C 2000 NF as 1% of 10.00 Kg 707.00

cementitious material.

27 Wall painting (three coats) with plastic emulsion paint of 145.00 Sqmt 137.39

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

28 Wall painting ( Three Coats ) with plastic emulsion paint of 86.00 Sqmt 145.04

approved brand and manufacture on ceilings and sloping

roofs surfaces to give and even shade including thoroughly

brushing the surface free from mortar dropings and other

foreign matter and sand.....

29 Finishing wall with weather proof exterior emulsion paint 191.00 Sqmt 131.06

on wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials.etc including

apprlying wall primer complete

30 Applying two coats of Birla (white cement based) or Asian 231.00 Smt 40.59

(acrylic lapy- putty) or equivalent & two coats of primer of

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand papered smooth.

31 Painting two coats (including extra priming coat) on new 10.00 Smt 122.49

steel and other metal surface with enamel paint, brushing,

interior to give an even shade including cleaning the

surface an even shade including cleanicn the surface of all

dirt, dust and other foreign matter.

32 Providing & Laying Grenite slab 18 mm thick in skirting, 11.00 Sqmt 3,293.61

dedo, risers of steps and landing, sill laid on bed of 10 mm

thick base of CM 1:4 finished with flush pointing in white

or colour cement as directed by EIC

33 Labour Charges for Edge Bevelling of Grenite 70.00 Rmt 85.85

Descriprion Qty Unit 1% Labour Amount in Rs.

34 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 84.00 Sqmt 970.07

mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring

by adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc.

complete for antiskit (upto 10 ton)

35 Providing and laying marble stone slab flooring over 20mm 27.00 Sqmt 2,090.25

(average)base of cement mortar 1:6 (1-cement : 6 coarse

sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid

and jointed with gray cement slurry including rubbing and

polishing complete. (A) Marble slab 25mm thick

36 Providing and fixing sandwiched granite and kota as 21.00 Sqmt 4,490.46

Kitchen platform, pantry, Basin counter etc. 20mm thick

granite of approved color + 30mm Cm in 1:4 + 20mm

kotah stone one side polished in one piece for kitchen /

platform. The joint shall be filled with.....

37 Providing and laying broken chine mosaic flooring using 83.00 Sqmt 1,292.92

brick bats 25 to 100mm size with 50 % of C.M. 1:4 (

cement : 5 coarse sand ) admixed with water proofing

compound for terrace using 12 mm to 20 mm broken

pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar

creme out upto surface using white cement including

rounding off junctions and extending them upto 15 cm

along the wall,clearing with water and oxalic acid etc. as

38 Providing, laying & jointing to level and slope 110 mm dia 34.00 Rmt 445.78

ISI PVC pipes of working pressure 6 KG per Sq.cm for

"vertical drainage" line including all necessary fittings

such as bends, 'Y' door bend, tees, one way joints, two

way joints, rubber packing r.....

39 Providing & fixing 50mm dia & 30cm length G.I. rainwater 4.00 No 101.91

spout including making hole and fixing in proper slope and

required pattern fixed in cement mortar 1:1 (1 cement :

sand) etc. complete as directed by Engineer In charge……

40 Double layer Roller Blinds 18.00 SMT 2,222.00

Providing and installing Zebra double layer roller blind

Polyester corded including all fixtures.

Providing & fixing in position mild steel door with 3,730.12

ventilation frame 40x40x6 mm and shutter frame

35x35x5mm ,75x5 mm ms flate at lock rail,10 mm square

bar in vent at10 cm c/c coverd with corrugated ms sheet

0.6 mm thick, including applying a priming coat of read

lead paint including cleanicn the surface of all dirt, dust

and other foreign matter (As directed by Engineer in

charge& approved drawing and design etc.)

Descriprion Qty Unit 1% Labour Amount in Rs.

Providing & fixing in position mild steel window with 4,142.32

ventilation frame 35x35x5 mm and shutter frame

25x25x5mm ,10 mm square bar grill at10 cm c/c coverd

with corrugated ms sheet 0.6 mm thick,including applying

a priming coat of read lead paint including cleanicn the

surface of all dirt, dust and other foreign matter (As

directed by Engineer in charge& approved drawing and

Painting of logo on front side wall as directed by Engineer

in charge and as per approved drawing.

Providing & Fixing Green board(2400mm x 1200mm) with 10,456.03

44 soft board(1200mm x 1200mm) on wall as per the drawing 2.00 NO

& design etc. complete.

Providing and fixing washbasin with single hole for pillar 2.00 Nos. 1,506.45

tap with C.I. or M.S. brackets painted white including

sutting holes and making good the same but excluding

fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm

x v 400mm size. (i) In white colour.

Providing erecting and fixing double coated ISI water tank 1,000.00 ltr 3.95

46 of required capacity each with all necessary fittings and

connection etc. complete on terrace

Providing and fixing C.P. brass waste for washbasin or 2.00 Nos. 67.91

sink. (A) 32mmdia

Providing and fixing 100mm sand cast iron grating for 2.00 Nos. 36.98

gully, floor or Nahni trap.

Providing and fixing screw down bib taps of following 2.00 Nos. 177.85

49 size.(C) Gun metal screw down bib tap. (ii) 20mm dia.

Providing and fixing brass screw down stop tap.(B) 25mm 3.00 Nos. 220.82

Providing laying and jointing in true line and level 25mm 100.00 Rmt 91.84

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

51 fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 32mm 50.00 Rmt 119.15

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

52 fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Descriprion Qty Unit 1% Labour Amount in Rs.

Providing laying and jointing in true line and level 50mm 50.00 Rmt 195.67

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

53 fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Misc. work/Unforeseen work if required to be carried out 1.00 JOB 151,500.00

during execution of the work which are assential and

required at stage of working such as Electrical

work,Furniture work, Landscaping work, Plumbing work,

False ceiling work, colour work and misc. civil work as per

instruction of Engineer in charge.

providing and erecting Miniature circuit breaker single pole 15.00 Each 112.11

6A to 25A suitable to operate on 240 V A.C. system and

55 having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark

Providing & erecting 240 V MCB double pole switch for 6.00 Each 299.97

motor & inductive load (C Curve) having 10 KA breaking

56 capacity & confirms to IS : 8828 in existing box having

following capacity

(A) 6 to 32 Amp. Cat-III

RCCB 2.00 Each 1,969.50

providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having

57 characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component. for

following Max. rating erected as directed

RCCB 1.00 Each 2,235.13

providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having

58 characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component. for

following Max. rating erected as directed

(ii) 40Amps. DP

Plastic enclosure fitted with DIN rail suitable for 10.00 Each 52.52

incorporating One / Two nos. MCB

Descriprion Qty Unit 1% Labour Amount in Rs.

Providing and erecting Sheet Steel powder coated MCB 1.00 Each 1,152.41

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

60 same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase

(b) sheet steel double door (IP-43)

(iii)8 way Cat-III

Point wiring for Light / Bell with 2-1.5 sq.mm & earth 20.00 Each 485.81

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

61 Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete - Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 8.00 PT. 674.68

sq.mm (Green) both are of .ISI marked 1.1 KV Grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular

type switch and hum free EME step type electronic fan

regulator mounted and accessories with earth continuity

of following type erected on PVC / Metallic/Wooden box,

62 single mounting base frame covered with

textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

Point wiring for on board Looped Plug with 6A Modular 8.00 PT. 257.55

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered

63 with textured / metallic/white front plate modules erected

on / in wall / ceiling with following type accessories

Descriprion Qty Unit 1% Labour Amount in Rs.

Point wiring for Individual Plug with & earth wire of 1.5 3.00 PT. 510.05

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

64 modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire

from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 3.00 PT. 805.98

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

65 modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[II] For 16A Plug and 16 amp mcb with 2-2.5 sq.mm Cu.

Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

Providing following type of Modular Type Accessories 10.00 Each 25.25

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

66 plate , modules erected with necessary connections as per

site situation directed by Engineer In charge.

(7) Blank Plate Single Cat-III

Providing & erecting Switch board for Computer or 6.00 PT. 1,133.22

electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic concealed/open

box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with

67 necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories Cat. III

Supplying & erecting approved make LAN cable of 100.00 Mtr 47.47

68 following size in existing pipe as per direction [C] Cat-6

Providing following type of Modular Type Accessories 6.00 Ea. 160.59

mounted with PVC / metallic/Wooden box, single mounting

69 base frame covered with textured / metallic/white front

plate , modules erected with necessary connections as per

site situation directed by Engineer In charge. (8)

Computer RJ-45 socket

Descriprion Qty Unit 1% Labour Amount in Rs.

Supplying & erecting fan hook box of 10 mm M.S. round 8.00 Ea. 108.07

bar bounded to the RCC bars up to 50mm length each side

70 and pierced through a 16 Gauge M.S. box / Heavy Duty

PVC box complete erected concealed in Ceiling with

necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the 8.00 Ea. 18.18

fan hook or Fan box.

Providing and erecting ISI mark Medium class RIGID PVC 180.00 RMT 33.33

PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction

72 boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed.

Providing and erecting ISI mark Medium class RIGID PVC 60.00 RMT 54.54

PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction

73 boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed.

Supplying & erecting UPVC Mini trunking (PVC Casing-n- 25.00 RMT 31.31

Capping) having double-locking arrangement with grooves,

trunking of size not below 12.5 mm in height as per IS

74 with accessories of PVC/Resin polypropylene not below

mm thick duly sealed in joint & erected on wall / ceiling of

following size .

Supplying under floor pregalvanised corrosion proof 20.00 RMT 297.95

rectangular sheet steel cable trunking of 1.6 mm thick

having with stand point load up to 1.33 Ton & free from

seepage of concrete of screed water with all

accessories,Junction Box,Joints as required and demanded

75 by engineer-incharge and laying/erecting as per OEM

guidelines and as per instruction of engineer incharge

having following size of dimensions and No of

compartments (W x D x T) Cat-III

[1] 50mm x 25mm x 1.6 mm with One Compartment

Providing and erecting Mains with 1.1 KV grade FRLS PVC 60.00 RMT 82.82

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed

76 on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured 15.00 RMT 364.61

copper cable 1.1 KV grade to be erected as directed of

following size. (L)

4 core 6 Sq. mm

Descriprion Qty Unit 1% Labour Amount in Rs.

Supplying and erecting LED indoor fittings with LEDs of 20.00 Each 295.93

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

78 LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)vv

(A) Tube Light with integral/ non-integral driver

(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet

Supply, Installation, Testing and Commissioning of suitable 8.00 Each 2,885.57

sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct

Current (BLDC) permanent ferrite magnet Motor, class of

insulation: B, Rust free 3 nos.Aluminium blades, 2 nos.

canopies, shackle kit with earthing provision, copper

winding, Power factor not < 0.9, Service Value (CMM/W)

minimum 6.85, Air delivery minimum 215 CMM,

RPM,230v (tolerance as per IS : 374-2019), THD < 10%,

79 with remote unit for Speed Control and all remaining

accessories including safety pin, nut bolts, washers,

temperature rise = 75 degree C (Max.), suitable for 140 to

285 Voltage and rectifier circuit with surge, over current

and overload protection , 50 Hz, Single phase AC Supply,

earthing etc. Complete as required.[ Make shall be

approved by Engineer in Charge]

(B) 1200 mm Sweep (48")

Supplying & erecting single phase approved make 2.00 Each 2,054.34

industrial exhaust fan suitable for medium duty ring

mounted low noise operation suitable for medium duty

having following dia size and maximum speed in RPM

[A] 305 mm dia 900 RPM Cat.II

Descriprion Qty Unit 1% Labour Amount in Rs.

Supplying & erecting earth pit of minimum bore 1.00 Each 8,636.51

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200- 250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with

high charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved

make OEM has to submit test certificate) & having back

filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 • / meter testing as per IEC 62561-2017,

81 Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retainmoisture for long

time Necessary test report must be submitted.(c) For

Electrical Installation covering Transformer Neutrals,

Lightning arrester Earthing, A.C.Plant & Sensitive

Computer System(like Automation, SCADA) i.e independent

(c) For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation,

SCADA) i.e independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs Back filling Compound :2

nos Bags of 25 Kg

Supplying & erecting earth pit of minimum bore 2.00 Each 4,591.46

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200- 250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with

high charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved

make OEM has to submit test certificate) & having back

filling compound of (B) Inner chemical (CCM Compound)-

82 Resistivity:- 0.2 • / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retainmoisture for long

time Necessary test report must be submitted.(c) For

Electrical Installation covering Transformer Neutrals,

Lightning arrester Earthing, A.C.Plant & Sensitive

Computer System(like Automation, SCADA) i.e independent

(a) For Electrical Installation up to 440V in normal

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Descriprion Qty Unit 1% Labour Amount in Rs.

Supplying & erecting carbon dioxide (CO2) fire 3.00 Each 6,591.26

extinguisher user of following capacity with necessary

83 clamps made from 50 x 6 mm M.S. Flat with nut & bolts

grouted in wall complete. [A] For 4.5 KG Capacity

Supplying & erecting ABC powder type 'Ceasefire' type Fire 3.00 Each 848.40

84 extinguisher as per IS 13849 or 1 Kg capacity with

necessary clamp for erection on wall

Misc. work/Unforeseen work if required to be carried out 1.00 Each 50,500.00

during execution of the work which are assential and

85 required at stage of working such as Electrical work and

misc. Electrical work as per instruction of Engineer in

supply of Working table with chemical-resistant top,

storage cabinets, stools etc. as per approved by EIC

Supply of Table top granite with SS frame working 18,685.00

table(1.0 mt x 1.5m) as per approved by EIC

Providing and fixing Wooden file storage wall 8,080.00

mounted/floor mounted with openable shutters incl. all

necessary joints, 01 mm th. SF finish laminate , teak wood

lipping, SS concealed handle, sliding lock & necessary

hardware materials etc .All inside and outside ply shall be

made of commercial plywood 18mm thick and covered

with 1mm thick SF laminate as per selection of EIC

however work should be executed as per instruction of

Details of Wooden file storage: Each storage will be

87 treated as single unit with 6 sides i.e. front(single/double 8 Sqmt

shutters), Back, left, right, top and bottom. Each shutter

must be fixed on one of two vertical sides which should

not be more than 500mm width. The depth/breadth of

cupboard shall not be more than 500mm for each storage

Height of each cupboard shall not be more than 1200mm,

each cupboard shall have to be provide with 02 handle of

SS, 04 magnets, 02 chain, 01 door stopper of SS and

lock. Measurement will be taken only for front side.(i.e

Height x Length)

88 Supply of SS Stools as per approved by EIC 15 Nos. 2,525.00

All-in-One Computer (Lenovo) 45,450.00

i5 Processor, 16GB RAM

Supply of Various Science lab instruments and

Laboratory Vacuum Pump 14,140.00

90 Electric, single stage, 1.5 CFM flow rate (installation 1 no

Digital Microscope 7,575.00

91 5MP, 50x–1000x magnification, USB/WiFi connectivity, LED 2 no

Digital Weighing Machine 2,525.00

500g capacity, 0.01g accuracy, LCD display

Digital Thermometer 757.50

Range -50°C to 300°C, with probe, LCD display

Descriprion Qty Unit 1% Labour Amount in Rs.

Interactive Display / Smart Board 151,500.00

94 75-inch 4K UHD LED, touchscreen, inbuilt Android OS, 1 no

Whiteboard Software

Sensors and Modules 5,050.00

95 Arduino-compatible kit: Temperature (DHT11), Humidity, 2 set

Light (LDR), Sound, Motion (PIR)

Robotics Kit 10,100.00

96 Based on Arduino/Raspberry Pi, includes motors, sensors, 2 kit

programming interface

Accurate Measurement Tools 5,050.00

97 Laser distance meter (40m range), digital protractor, 1 set

vernier calipers

Science Project Kits 5,050.00

98 Kits for Electronics (Simple Circuits), Robotics (Basic Robot 5 kit

Car), and Coding (Scratch/Blockly)

Mini Robots for Coding & Robotics 10,100.00

99 Programmable robots like Code & Go Robot Mouse, 5 no

Ozobot, Matatalab Lite

Digital Weather Station 5,050.00

100 Measures temperature, humidity, wind speed, wind 1 no

direction, rainfall; includes data logger

Digital Oscillation Kit 6,565.00

101 Spring-mass system, pendulum, wave generator, with data 1 no

Solar Energy Experiment Kit 3,030.00

102 Includes solar panel, motor, LED, fan, battery, wiring for 2 kit

Petri Dish & Microbiology Culture Kits 3,535.00

103 100 Petri dishes, agar powder, cotton swabs, disposable 1 kit

Fuel Cell Experiment Kit 5,050.00

104 Prototype model generating electricity from hydrogen and 1 kit

Digital pH Meter 3,535.00

0–14 pH range, 0.01 accuracy, auto calibration

Digital Multimeter 2,020.00

106 Measures voltage (AC/DC), current (AC/DC), resistance, 2 no

continuity, diode testing

Geometric Modeling Set 2,777.50

107 Plastic/wood 3D shapes (cube, pyramid, sphere, cone) 2 set

with connectors

Digital Calipers & Micrometer 2,525.00

150mm digital calipers, 0–25mm digital micrometer

Solar & Lunar Eclipse Model 1,515.00

Model demonstrating solar and lunar eclipse

Data Loggers 7,070.00

110 With temperature, pressure, light sensors; USB 2 no

connectivity and software

Molecular Model Kits 3,030.00

111 Carbon, hydrogen, oxygen, nitrogen atom models and 2 kit

bond connectors

Human Anatomy Model

Full-size skeleton model, heart, lungs, and brain models

Descriprion Qty Unit 1% Labour Amount in Rs.

Solar System Model

Orbital mechanism with models of 8 planets and the Sun

Electronics Circuit Kit 2,525.00

114 Breadboard, resistors, capacitors, LEDs, transistors, 3 kit

battery, jumper wires

Hydro Energy Model 2,020.00

Small-size model for hydroelectric energy

Clinical Thermometer 303.00

Digital, forehead/ear reading, Fahrenheit/Celsius

Laboratory Glassware Set 5,050.00

117 Beakers (50–500 ml), flasks (100–250 ml), test tubes (10), 2 set

measuring cylinder

Floating & Sinking Object Kit 2,020.00

118 Objects of different densities (wood, stone, plastic, metal) 1 kit

with beaker of water

Magnetism & Electricity Kit 3,030.00

119 Bar magnet, horseshoe magnet, compass, copper wire, 2 kit

Kinetic & Potential Energy Model

Roller coaster model, pendulum model, spring launcher

Digital Slide Scanner 12,120.00

121 Converts microscope slides to digital images, with 5MP 1 no

Digital Stopwatch 505.00

Lap/split time function, water-resistant

Stethoscope 1,010.00

Device for measuring heartbeats

Temperature & Pressure Sensor 3,030.00

124 Raspberry Pi/Arduino compatible BMP280/BME280 sensor 3 no

Color Mixing Kit 2,525.00

Red, green, blue LED lights, color filters, white screen

Drill Machine 7,070.00

Bosch GSB 120 LI cordless drill driver

Earthquake Model

Demonstrates seismic waves, with vibration generator

Science Table (Large Size) 11,615.00

128 Sturdy frame with chemical-resistant surface, length 8 no

Cutting/Gripping Tools & Screwdrivers 1,010.00

Set of pliers, wire strippers, and screwdrivers

Holding & Clamping Tools 1,767.50

130 Lab clamps, retort stands, and bossheads for holding 1 no

Kidney & Bladder Model 2,272.50

Anatomical model made of plastic

Digestive System Model 2,272.50

Plastic model of human digestive system

Force, Motion & Machines Kit 3,030.00

Kit demonstrating principles of motion

Learn with Magnets 1,010.00

Kit with various types of magnets and iron filings

Descriprion Qty Unit 1% Labour Amount in Rs.

Reflection of Light Kit 1,363.50

Includes light source, mirrors, and protractor

Learn Arduino – For Beginners 2,525.00

Kit with Arduino board, breadboard, and sensors

Water Electrolysis Kit 1,767.50

Electrolysis setup with electrodes and power supply

Height Measurement Chart 555.50

Laminated chart, 2' × 6'3"

Political Globe – 40 cm 2,525.00

139 Large political globe showing countries, capitals, and 1 no

RGB Par Light 3,030.00

140 Ray reflection for visuals (waterproof with remote, 150 5 no

TDS Meter 858.50

Measures total dissolved solids (TDS) in water

Spirit Lamp 202.00

Small lamp used for heating

Electric Induction 1,414.00

Device used to heat materials

Battery-operated torch for general use

Set of glass or plastic droppers for liquids

Lenses (Concave & Convex) 202.00

Set of high-quality lenses

Mirrors (Concave & Convex) 277.75

Set of mirrors for reflection experiments

Magnets (All Types) 353.50

Set of bar, horseshoe, and cylindrical magnets

Cordless Rotary Multi-Tool Set 3,787.50

Handheld tool with various attachments

Air Blower 1,717.00

150 Handheld blower for cleaning instruments (16000 rpm, 1 no

DIY Drone Kit (MDF) 4,545.00

Do-It-Yourself drone kit

Solar & Green Energy Kit 2,272.50

Kit demonstrating principles of solar energy

AI-Based Robotics Kit 10,100.00

Kit for building AI-powered robots

Humanoid Robotics Kit 13,635.00

Kit for building a small humanoid robot

Mechanical Construction Kit 2,777.50

Kit for understanding mechanical motion principles

156 Compatible Battery Charger 1 no

Charger for 12V rechargeable batteries

Rechargeable Battery 12V 1,414.00

12V rechargeable battery for projects

Sensors & Sensor Modules 1,767.50

Kit containing various sensors

Spanner Set 1,010.00

Set of open-end and ring spanners

Descriprion Qty Unit 1% Labour Amount in Rs.

Balanced Diet Chart 252.50

160 Chart showing main components and importance of a 11 no

Common Diseases Chart 303.00

161 Chart showing common diseases, their symptoms, and 1 no

Heart Chart 252.50

162 Chart showing internal and external structure of the 1 no

Water Cycle Chart 252.50

Chart explaining stages of the water cycle

Eye Chart 252.50

Chart showing the human eye and its parts

Nervous System Chart

Chart showing major human nerves and their functions

Male–Female Reproductive System Chart 404.00

Chart showing human reproductive systems

Scientists Chart 404.00

Chart of various scientists (Acrylic 1.5 × 2.0 ft)

Descriprion Qty Unit 1% Labour Amount in Rs.

Hydrochloric Acid 202.00

500 ml – for laboratory use

Sodium Hydroxide 303.00

500 ml – for laboratory use

Phenolphthalein 505.00

500 ml – used as an indicator in chemical processes

Sodium Bicarbonate 151.50

500 g – used in chemical experiments

Citric Acid 202.00

250 g – for laboratory use

Potassium Permanganate 404.00

500 ml – used as purifying and oxidizing agent

500 ml – for laboratory use

Copper Sulphate 252.50

500 g – for crystallization and other experiments

Methylene Blue 353.50

250 ml – used for staining in biology

Magnesium Ribbon 151.50

Thin ribbon for experiments

For experiments

Starch Powder 101.00

Starch powder for experiments

Sodium Nitrite 252.50

For laboratory use

Sodium Nitrite 50.50

For laboratory use

Total Amount Excl. GST

Total Amount Excl. GST

Grand Total Amount Incl. GST and labour cess

Grand Total Amount Incl. GST and labour cess