Repair to sunken flooring and misc civil works to md JCO/OR/Def civilian accns of DSC Centre, DSC Records and MH area at Mily station Kannur under AGE (I) Cannanore.

Amount

Demolition of brick or stone or PCC block masonry built in cement or cement lime mortar, including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work and pre cast concrete articles and removing debris outside MD land all as directed.

M&L for laterite stone masonry, regular coursed, well bonded and solidly hearted , built in CM (1:6) all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removing debris outside MD land all as directed.

Demolition of cement concrete (un-reinforced) above ground floors exceeding 15cm thickness and removing debris outside MD land all as directed.

Taking down cement or cement lime plaster on brick/stone walls or in ceiling surfaces incl racking out joints hacking for key scrubbing down with water etc and removing rubbish outside MD land all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on stone masonry surfaces, finished even and smooth without using extra cement all as specified and directed .

M&L for rendering 15mm thick in cement mortar (1:4) on stone masonry surfaces, finished even and smooth without using extra cement all as specified and directed .

M&L for rendering 5mm thick in cement mortar (1:3) on concrete ceiling surfaces, finished even and smooth without using extra cement all as specified and directed .

M&L for rendering 15mm thick in cement mortar (1:4) on other than fair faces of brick work or concrete surfaces including chajja, facia etc surfaces, finished even and smooth without using extra cement all as specified and directed .

S&F Doctor fixit pidifin 2k high performance 2 component flexible providing and laying water proofing treatment to sunken portion of WC,bathroom etc by applying cement slurry mixed with two components elasomeric acrylic based polymer modified cementitious composited compound coating of make Dr Fixit, pidilite or equivalant as follows :- (a) Applying Ist layer of cement @ 0.488 kg/sqm mixed with acrylic based polymer modified cementitious composited compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours (b) Second layer of slurry of cement @0.242 kg/sqm mixed with acrylic based polymer modified cementitious composited compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours (c) Providing 20mm thick cement screed 1:4 mixed with water proofing liquid as per manufacturer instructions complete all as specified and directed. Note : Cost of Water proofing liquid should be included in the rate.

M & L for plain cement concrete (1:5:10),type E2 using 40mm graded trap stone aggregate as in foundation, filling including necessary form work all as specified and directed

M&L 40mm thick PCC 1:2:4, Type B0 (using 12.5mm graded stone aggregate) as in flooring all as specified and directed.

M&L 25mm thick PCC 1:2:4, Type B0 (using 12.5mm graded stone aggregate) as in flooring all as specified and directed.

M&L for coloured joint free non-skid ceramic tiles, 7 to 8mm thick, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured / white cement to match laid over and including 20mm thick screed bed or bedding layer in cement mortar (1:6) all as specified and directed.

M&L for coloured glazed ceramic tiles 200x300x7mm or 250x350x7mm , as in skirting / dado, set and jointed in neat cement slurry and pointed in coloured / white cement to match laid over and including 10 mm thick backing on stone/brick masonry surfaces in cement mortar (1:4) all as specified and directed.

Demolition of stone slab and tiles of any description and thickness in floors including cement mortar bedding (but not backing), and rubbish off the premises outside MD land and all as directed.

S&F in repairs Vitreous China squatting pan “Orissa” pattern, of size 580 x 440 mm white, with integral foot rests, (excluding flushing cistern and flush pipe), including provision of lime concrete bedding, connection to trap and to flushing pipe, anti-syphonage pipe, etc and joint between flushing pipe and socket of WC pan, complete and making good to the floor all as specified and directed.

S&F Vitreous China Wash down water closet pan (Pedestal pattern) white, (excluding flushing cistern and flush type) pedestal pan and trap including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc complete including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device as fixed in repairs all as specified and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern low level, 10 Litre capacity, white, with inlet, ball valve, float and handle including low or high density PVC flush pipe all as specified and directed.

S&F in repairs health faucet , brass chromium plated jet spray including LDPE flexible cable with jet of 100 mm long fixing to 15 mm dia pipe all as specified and directed.

S&F 500 litres capacity rotational moulded polthylene water storage tanks (cylindrical vertical with closed top) of make Sintex/Polycon/Plasto hoisted and fixed in position including taking down unserviceable water tank all as specified in SSR Part I,2009 and directed.

S&F ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule of 20mm bore dia all as specified and directed.

Taking up or down LDPE pipes of any description of 32mm bore all as directed.

Dismantling and breaking up drain pipes 75/100mm bore (cast iron) set in cement mortar any dia of pipes and removing debris outside MD land all as directed.

M&L PVC (SWR) pipe type 'B' 75mm bore single socketed with rubber ring joints laid in trenches or in floors all as specified and directed.

M&L PVC (SWR) pipe type 'B' 75mm bore single socketed with rubber ring joints fixed to wall all as specified and directed.

M&L PVC (SWR) pipe type 'B' 110mm bore single socketed with rubber ring joints laid in trenches or in floors all as specified and directed.

M&L PVC (SWR) pipe type 'B' 110mm bore single socketed with rubber ring joints fixed to wall all as specified and directed.

M&L PVC (SWR) vent cowl 75mm dia with solvent cement joints all as specified and directed.

M&L PVC (SWR) vent cowl 110mm dia with solvent cement joints all as specified and directed.

S&F 75 mm bore, PVC (SWR) bends all as specified and directed

S&F 75 mm bore, PVC (SWR) bends with acess door all as specified and directed

S&F 110 mm bore, PVC (SWR) bends all as specified and directed

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified and directed.

M&L for 75mm diameter PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed.

S&F PVC (SWR) junction single T equal or unequal 110 mm bore, all as specified and directed

S&F grating square 150mm size of PTMT complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for removing to store of sizes upto 20mm bore all as directed.

Cutting chases for concealing water tubing and making good, in stone or concrete block or slab or walls, cutting not exc 10cm girth complete all as specified and as directed.

S&F for 15 mm bore UPVC pipes of pressure rating 10 kgf / cm2, fixed complete to walls, ceilings etc. all as specified and directed.

S&F for 20 mm bore UPVC pipes of pressure rating 10 kgf / cm2, fixed complete to walls, ceilings etc. all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( ½ round or ¾ section) in cement concrete 1:2:4, type B1 using 20mm graded stone aggregate, smooth finished and reforming benching as required for internal dia of pipe 110mm ball as directed.

S&F in repair Vitreous China Wash basin, white, flat back, size 630 x 450 mm, including CI brackets, (but excl. pillar tap) cutting for and pinning in ends of brackets or erecting stand etc complete all as specified and directed.

S&F in repairs 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.

S&F in repair 15 mm bore pillar tap, PTMT any colour (min weight 110gms), high pressure screwed for iron pipe or for PVC pipe or for brass ferrule, fixed all as specified and directed.

Supply and fix PVC connection 45cm long with PTMT nuts for flush tank, wash basin, etc. all as specified and directed

S&F 15 mm bore bib taps, PTMT any colour (min weight 15-90gms), high pressure screwed for iron pipe or for PVC pipe or for brass ferrule, fixed as in repairs all as specified and directed.

S&F 15 mm stop valves, PTMT any colour (min weight 15-90gms), high pressure screwed for iron pipe or for PVC pipe or for brass ferrule, fixed as in repairs all as specified and directed.

S&F 20 mm stop valves, PTMT any colour (min weight 20 -92gms), high pressure screwed for iron pipe or for PVC pipe or for brass ferrule, fixed as in repairs all as specified and directed.

S & F in repairs swivel shower rose of PTMT any colour suitable to 15mm bore pipe complete all as specified and as directed.

S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device all as specified and directed.

S&F in repairs plastic lid/cover suitable for PVC OH tank of capacity 250/500/1000 litres of make Sintex or polycon all as specified and directed.

Taking down chowkats with shutters any description n exc. 1.5 Sqm each (without taking off shutters from the frame) all as directed.

Taking down door shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each and refixing the same opening after easing and adjusting and refixing/renewal of builders hardware with screws all as directed.

M&L solid PVC door frame of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, all as specified and directed.

S&F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain coloured PVC “C” channel having a PVC sheet strip of 20mm width stock inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour of PVC sheet fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement etc. Details as peer specification and drawings and all as directed.

S&F stainless steel butt hinges medium weight; 100mm size as per IS 21817 fixed with stainless steel screws all as specified.

S&F 150mm long aluminum anodized barrel tower bolts of extruded section fixed with stainless steel screws all as specified.

S&F extruded aluminum alloy anodized handle fabricated type 150mm size all as specified.

M & L for 75 mm thick plain cement concrete 1:3:6, type C2 using 40mm graded aggregate as in plinth protection etc including necessary form work complete all as specified and directed

M&L for preparation of new plastered surfaces and applying three coats of white wash on walls surfaces all as specified and directed.

Sujith T

T.P.SUNIL KUMAR