Providing and Fitting of Electrical wirring, earthling to 62.5KVA and 25KVA DG Set at DC office Baroo Kargil.

Amount

Providing and fitting 50mm 3.5 core 3phase Electric Cable for power connection from02no DG sets to panel box =15mtr, copper thimble 50sqmm=16nos, copper wire 1.5sqmm for lighting connection=01roll, 50watt IED bulb=04nos, 16amp MCB=04nos, 06amp MCB=04nos, 06amp switch=06nos, 06amp socket=08nos, 200watt blower heater=02nos, copper coil 2.5mm=01roll, 16amp SS Combine=02nos, MCB box 06 way=01no, 63amp DP=01no, GI box 06way=04nos, module plate 06way=04nos, 100amp Change over assy.=01no ,including labour charges

Proving , cutting, fitting and electric welding to 4x4 feet angle angle iron 32x32x6mm and fitting of 06mm play wood sheet of 4x4 feet for supporting and fix with angle iron for fitting of electrical accessories on it. ii).providing and fitting of MS pipe of dia 100mm of length 12mtr for extension of DG silencer from both DG set to out door of the shed and complete electric welding to the required parts.

Maintenance free earthling:- S.I.T.C. of ALLTEC make long life maintenance free electrolytic earthling system for 02no DG Set with 10 feet vertical k type copper not less then 2”(50.8mm)ID and not less than 0.08”(2.03mm) wall thickness, which does not require manual addition of water. The system should be corrosion resistant pre-filled with hygroscopic powder and provided with suitable breathing and leaching ports at the ends. Rated for high fault currents bas bar rated for 10KA, fault current bus bar connection type as “Terraweld” to with hold temperature of 700˚C. The earthling port shall be designed and supplied with poly plastic port cover non conductive, environment friendly and lockable.

M/S GULZAR ELECTRICALS