Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹58.7 LAdmitted-Finance 28 XIII SHALEMA BUILDING ETTIKKARA ROAD NEAR HOC JUNCTION AMBALAMUGAL ERNAKULAM KERALA 682302 | ERNAKULAM | KERALA | 682302 | L1 | Admitted-Finance | |
| 2 | L2₹59.5 L+₹71,792.67 (1.22%)Admitted-Finance MATTATHIL BUILDING PERINGALA PO KUMARAPURAM ERNAKULAM 683565 | ERNAKULAM | ERNAKULAM | KERALA | 683565 | L2 | Admitted-Finance | |
| 3 | L3₹67.0 L+₹8.3 L (14.1%)Admitted-Finance XIV 718 CLINT ROAD VADAVUCODE PUTHENCRUZ AMBALAMEDU PO AMBALAMEDU ERNAKULAM KERALA 682303 | ERNAKULAM | KERALA | 682303 | L3 | Admitted-Finance | |
| 4 | L4₹85.5 L+₹26.8 L (45.6%)Admitted-Finance SADALAYAM THODIYOOR NORTH P O VEGARA KARUNAGAPPALLY KOLLAM | KARUNAGAPPALLY | KOLLAM | KERALA | L4 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Vallooran Constructions L3 | K K ANILKUMAR L1 | G S CONSTRUCTIONS L4 | MBM ENGG WORKS L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | CDP-19-AT-USS-01
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m above ground level and removal of rubbish and cleared items to locations pointed out by Engineer in-charge, with in a lead of 50m. | 200 | M2 | 1,400 ₹1,652 Lowest | 6,000 ₹7,080 | 9,600 ₹11,328 | 2,000 ₹2,360 |
| 2.00 | CDP-19-AT-USS-02
Demolishing R.C.C. work manually / by mechanical means including stacking of reinforcement bars and disposal of unserviceable material within 50m lead as per direction of Engineer in-charge. | 1 | M3 | 3,940 ₹4,649.2 | 6,300 ₹7,434 | 7,800 ₹9,204 | 2,500 ₹2,950 Lowest |
| 3.00 | CDP-19-AT-USS-03
Demolition of PCC/Lean concrete at any level of any mix of any kind, manually/ by mechanical means including providing of tools, equipment, dewatering if any, labour etc., with in 50m lead as directed by the Engineer-in-Charge. | 1 | M3 | 2,950 ₹3,481 | 3,675 ₹4,336.5 | 5,200 ₹6,136 | 1,950 ₹2,301 Lowest |
| 4.00 | CDP-19-AT-USS-04
Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved dumping ground for lead up to 10 km for all lifts ,within the premises of FACT CD, complete as per directions of Engineer-in-Charge. | 5 | M3 | 1,700 ₹2,006 | 1,840 ₹2,171.2 | 11,900 ₹14,042 | 1,600 ₹1,888 Lowest |
| 5.00 | CDP-19-AT-USS-05
Charges for conveying the surplus earth to places approximately 5 kms away and dumping at low lying places as directed by the Engineer incharge. | 190 | M3 | 47,500 ₹56,050 | 29,450 ₹34,751 Lowest | 1,48,200 ₹1,74,876 | 76,000 ₹89,680 |
| 6.00 | CDP-19-AT-USS-06
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains, in all kinds of soil, including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed by the Engineer-in -charge, with in a lead of 50m. The rates shall include keeping the sides from collapsing using necessary timbering, planking, and shoring. | 350 | M3 | 1,50,500 ₹1,77,590 | 1,35,800 ₹1,60,244 Lowest | 2,83,500 ₹3,34,530 | 1,57,500 ₹1,85,850 |
| 7.00 | CDP-19-AT-USS-07
Chipping and removing weak concrete at the top of RCC piles to the cut off level in line and levels carefully, manually / mechanically without damaging the remaining portion of pile and exposing the reinforcement, cleaning the reinforcement off any loose concrete particles and removing the debris to places pointed out within the project premises as directed by the Engineer in-charge. | 0.75 | M3 | 3,225 ₹3,805.5 | 3,543.75 ₹4,181.63 | 2,925 ₹3,451.5 Lowest | 5,250 ₹6,195 |
| 8.00 | CDP-19-AT-USS-08
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | 160 | M3 | 54,400 ₹64,192 | 33,600 ₹39,648 | 1,16,480 ₹1,37,446.4 | 25,600 ₹30,208 Lowest |
| 9.00 | CDP-19-AT-USS-09
Providing and laying plain cement concrete work in 1:4:8 mix (1 cement: 4 coarse river sand/manufactured sand: 8 40mm nominal size graded hard granite broken stones) including all charges for mixing concrete, laying, consolidating, curing, cost for bailing out of water, oil, liquid mud etc. from all sources in excavated pits, trenches, etc. complete at all levels as per standard specifications but excluding the cost of shuttering, and as directed by the Engineer in-charge for foundation / levelling course etc.. | 20 | M3 | 1,58,000 ₹1,86,440 | 1,30,000 ₹1,53,400 | 2,84,000 ₹3,35,120 | 1,24,000 ₹1,46,320 Lowest |
| 10.00 | CDP-19-AT-USS-10
Providing and laying in position machine batched and machine mixed/RMC design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in-charge. (Note: - Cement content considered in this item is @ 340 kg/cum. Excess cement used as per design mix is payable separately) – for all works below plinth level. | 30 | M3 | 3,18,000 ₹3,75,240 | 2,83,500 ₹3,34,530 Lowest | 5,10,000 ₹6,01,800 | 3,03,000 ₹3,57,540 |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
19 May 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGM(MAT)-C
MATERIAL CONTRACTS PD ADMINISTRATION BUILDING FACT UDYOGAMANDAL
Civil Work for Providing Power Supply at the Battery Limit of 10000MT Ammonia Storage System at FACT CD
2023_FACT_751062_1
04031/2023-2024/E27283
Open Tender
Miscellaneous Works
Item Rate
90 days
FACT COCHIN DIVISION, AMBALAMEDU
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹1 L
Yes
5 Jun 2023
29 Apr 2023
20 May 2023
29 Apr 2023
19 May 2023
29 Apr 2023
CDP-19-AT-USS-01 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m above ground level and removal of rubbish and cleared items to locations pointed out by Engineer in-charge, with in a lead of 50m.
CDP-19-AT-USS-02 Demolishing R.C.C. work manually / by mechanical means including stacking of reinforcement bars and disposal of unserviceable material within 50m lead as per direction of Engineer in-charge.
CDP-19-AT-USS-03 Demolition of PCC/Lean concrete at any level of any mix of any kind, manually/ by mechanical means including providing of tools, equipment, dewatering if any, labour etc., with in 50m lead as directed by the Engineer-in-Charge.
CDP-19-AT-USS-04 Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved dumping ground for lead up to 10 km for all lifts ,within the premises of FACT CD, complete as per directions of Engineer-in-Charge.
CDP-19-AT-USS-05 Charges for conveying the surplus earth to places approximately 5 kms away and dumping at low lying places as directed by the Engineer incharge.
CDP-19-AT-USS-06 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains, in all kinds of soil, including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed by the Engineer-in -charge, with in a lead of 50m. The rates shall include keeping the sides from collapsing using necessary timbering, planking, and shoring.
CDP-19-AT-USS-07 Chipping and removing weak concrete at the top of RCC piles to the cut off level in line and levels carefully, manually / mechanically without damaging the remaining portion of pile and exposing the reinforcement, cleaning the reinforcement off any loose concrete particles and removing the debris to places pointed out within the project premises as directed by the Engineer in-charge.
CDP-19-AT-USS-08 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
CDP-19-AT-USS-09 Providing and laying plain cement concrete work in 1:4:8 mix (1 cement: 4 coarse river sand/manufactured sand: 8 40mm nominal size graded hard granite broken stones) including all charges for mixing concrete, laying, consolidating, curing, cost for bailing out of water, oil, liquid mud etc. from all sources in excavated pits, trenches, etc. complete at all levels as per standard specifications but excluding the cost of shuttering, and as directed by the Engineer in-charge for foundation / levelling course etc..
CDP-19-AT-USS-10 Providing and laying in position machine batched and machine mixed/RMC design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in-charge. (Note: - Cement content considered in this item is @ 340 kg/cum. Excess cement used as per design mix is payable separately) – for all works below plinth level.
CDP-19-AT-USS-11 Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand(zone- III) : 3 graded stone aggregate 20 mm nominal size) work at all levels, excluding cost of centering, shuttering, finishing and reinforcement & including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer incharge- For flooring/cable trench.
CDP-19-AT-USS-12 Add for using extra cement in the items of design mix over and above the specified cement content therein.
CDP-19-AT-USS-13 Reinforced cement concrete work of M25 grade for precast cover slab using Portland pozzolana cement containing more than 25% of fly ash, river sand / manufactured sand conforming to IS 383 and 20mm nominal size graded hard granite broken stones including all charges for designing the mix, weigh batching, including installation of batching plant at the designated location in the site premises or arranging RMC, mixing concrete, cost of adding concrete admixtures as required, transporting, formwork, laying, vibrating, consolidating, curing with minimal use of potable water subject to provision of IS 456, handling, transporting, loading, unloading, keeping and fixing in position, at all levels etc., complete but excluding cost of providing reinforcements. (Exposed surfaces of pre-cast elements shall have good finish with no blemish or mark on the finished surfaces) NOTE- (1) Minimum Cement content shall be @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. (2) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacement of OPC as per IS: 456. Uniform blending with cement to be ensured in accordance with clauses 5.2 and 5.2.1 of IS:456 - in the items of BMC and RMC -for cover slabs (75mm to 100mm thick) on cable trench.
CDP-19-AT-USS-14 Providing form work to cement concrete and RCC works with necessary plywood / steel sheet, steel joists, runners, struts, posts etc with adjustable spans and telescopic posts, wooden planks etc. including removal after completion /curing at all levels for foundation footings, bases of columns and walls and for mass concrete with straight sides.
CDP-19-AT-USS-15 Providing form work to cement concrete and RCC works with necessary plywood / steel sheet, steel joists, runners, struts, posts etc with adjustable spans and telescopic posts, wooden planks etc. including removal after completion /curing at all levels for Lintels, beams, plinth beams, girders, bressumers and cantilevers. Rate to include for shuttering at all heights.
CDP-19-AT-USS-16 Supplying, fabricating, conveying, and fixing reinforcement to RCC works at all levels with high strength deformed bars Fe 500D/ 550D grade Thermo Mechanically Treated (TMT) bars conforming to IS 1786 including all charges for uncoiling and straightening rods, cutting rods, bending cold, placing in position and supplying & tying with black annealed tying wire of 16 gauge, etc. complete.
CDP-19-AT-USS-17 Supplying, conveying fabrication and erection of MS single section members such as channels, guard rail, MS angle hand rails verticals, etc. with fixtures such as end stops, clamps, bolts and nuts etc. including charges for cutting, splicing, drilling holes as required, fixing to lines and levels, cleaning and painting shall be as mentioned in "Specific requirements of work".
CDP-19-AT-USS-18 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.: In Gates, gratings, frames, guard bar, ladder, railings, brackets and similar works including charges for cutting, splicing, drilling holes as required, fixing to lines and levels, cleaning and painting shall be as mentioned in "Specific requirements of work".
CDP-19-AT-USS-19 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete to all lines and levels and applying petroleum jelly / grease after erection on exposed surface of bolts, covering the same with plastic wraps to prevent corrosion.
CDP-19-AT-USS-20 Supplying and fixing non-asbestos cement corrugated roofing sheets of minimum 6mm thickness reinforced by organic fibres and/or inorganic synthetic fibres (as per IS: 14871) for roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self-drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required.
CDP-19-AT-USS-21 Supplying and fixing non-asbestos cement roof fixtures like hips, valleys and flashings of minimum 6mm thickness reinforced by organic fibres and/or inorganic synthetic fibres (as per IS: 14871) for roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self-drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting to size and shape wherever required.
CDP-19-AT-USS-22 Supplying and fixing in position half round rain-water gutters made from UPVC pipe conforming to IS 13592 Type A, including connecting them to down water pipes with suitable joint sealants. The sections shall include necessary end pieces and down take pieces.
CDP-19-AT-USS-23 Providing and fixing on walls / RCC column face/steel columns un-plasticised Rigid PVC single socketed pipes of 110 mm diameter(nominal) rainwater pipes conforming to IS: 13592 Type A including required bends, using SS clamps and nails etc and attaching one end to rain-water gutters with proper sealants.
CDP-19-AT-USS-24 Supply, transportation and application of 2 coats of anticorrosive bituminous coating on concrete surfaces (below ground) : Applying 2 coats of anticorrosive Bituminous coating. Cleaning the surface of all laitance and loose particles to provide a clean base to receive primer. Surface shall be made rough by Light sandblasting/Water jet washing/Hard wire brushing for proper bonding. Application of first coat of hot bitumen paint. Application of second coat of hot bitumen paint after the first coat is cured for minimum 24 hrs.with all materials, consumables, labour, tools and tackles, scaffolding etc all complete as per specifications and directions of Engineer in Charge.
CDP-19-AT-USS-25 Supplying, Conveying, fabricating and fixing MS inserts of all types fabricated out of MS plates, angles, channels, flats, rods, fabricated pieces, etc. in RCC/ masonry works at all levels including all charges for cutting, welding, fixing to lines and levels and painting as mentioned in "Specific requirements of work".
CDP-19-AT-USS-26 Supplying and fixing rebars in already cast concrete, including drilling, cleaning hole with air blow-out & wire-brush and injecting odourless Chemical of HILTI (RE 500 V4) or Equivalent make, packed in dual foil, with the help of dispenser into a hole of diameter and depth as per manufacture specification, at all levels & locations for high strength deformed steel reinforcement bars of dia. 16 mm, DESIGNED FOR FULL TENSILE ANCHORAGE, including testing (as per manufacturer's recommendations), adjusting and making good any damage done to the structure etc. all complete as specified and directed. (Supply of all materials shall be in contractor's scope).
CDP-19-AT-USS-27 Supply and installation of chemical anchors type "Hilti" HVU or equivalent as per drawings, including the cost of the bolts, carting the same to site of work, fixing in position with necessary, tools, labour etc. for all heights and depths, drilling holes, anchor rods (HAS / HAS-E) with nuts and washers, and fastening as per vendor’s specifications, complete and as directed by the E-i-C.: Installation of anchor rods HASU 5.8 M24x300 with HVU 2 Capsule.
CDP-19-AT-USS-28 Supplying and grouting pockets, base plates, etc. at all levels for static equipments /structural steel supports using nonshrink grout shrinkkomp 10 of M/s ACC or Conbextra GP I of M/s FOSROC or equivalent.
CDP-19-AT-USS-29 Providing and laying factory made precast and well cured cement solid blocks conforming to IS 2185 (Part 1) of 100/150/200 mm thickness, having a compressive strength of 5N/mm2 from approved manufacturer in cement mortar 1:6,in superstructure at all level above plinth.
CDP-19-AT-USS-30 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer in-charge, made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade.
CDP-19-AT-USS-31 Plastering with cement mortar 1:4, 15mm thick floated hard and trowelled smooth.
CDP-19-AT-USS-32 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
CDP-19-AT-USS-33 Painting with two coats of premium weather proof acrylic / plastic emulsion paint of exterior grade on new surfaces over a coat of cement primer (paid separately) including applying additional coats wherever required to achieve even shade and colour at all heights including cost of all labour, materials and scaffolding.
MBM ENGG WORKS
Vallooran Constructions
G S CONSTRUCTIONS
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .