Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.1 LAccepted-AOC | ₹47.1 L Quoted ₹52.1 L | L1 | Accepted-AOC Eligible |
| 2 | L2₹54.0 L+₹2.0 L (3.75%)Rejected-Finance SHYAM COTTAGE RAM NAGAR SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | ₹54.0 L+₹2.0 L (3.75%) | L2 | Rejected-Finance In Eligible |
| 3 | L3₹57.1 L+₹5.0 L (9.69%)Rejected-Finance VILL SAKRAH PO CHAMBI TEHSIL SUNDERNAGAR DISTT MANDI HP | SUNDERNAGAR | MANDI | HIMACHAL PRADESH | ₹57.1 L+₹5.0 L (9.69%) | L3 | Rejected-Finance In Eligible |
| Sl No | Description | Qty | Unit | HEM RAJ L2 | KAMI SHERPA L1 | KUSHAL SINGH RAGHAV L3 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundations, trenches etc.in all kind of soil in all leads and lifts such as pick work, jumper work in saturated/unsaturated soil including bailing out water, blasting work in hard/ soft rock or chiseling in hard/soft rock where blasting is prohibited in all lifts stacking the excavated earth not more than 3 mtrs clear from the edge of excavation and then returning the stacked soil in 15 cm layers when required into plinths sides of each deposited layer by ramming and watering and then disposing of all surplus excavated earth foundations etc., consolidating as directed within all leads and lifts and handing over the useable materials available from excavation to department free of cost as per direction of Engineer-in-charge with in all leads and lifts. | 158.13 | Cum | 299 ₹47,280.87 | 300 ₹47,439 | 295 ₹46,648.35 Lowest |
| 2.00Providing, laying, jointing, lowering, aligning, fixing, testing and commissioning of G.I. Pipes conforming to IS:1239 (Part-I & Part-II), latest revision, ISI/BIS marked, of specified diameter and class (Light/Medium/Heavy) complete with all specials, G.I. fittings, sockets, bends, tees, reducers, unions, nipples, supports, hangers, nuts, bolts, washers, jointing materials including PTFE tape/hemp and approved jointing compound, cutting, threading, screwing, fabrication, making threaded joints, lowering in position, proper alignment, anchoring, hydraulic pressure testing, flushing, disinfection, trial run and commissioning, including all labour, tools & plants, machinery, loading, unloading, carriage, handling, storage, all leads and lifts, complete in all respects as per CPHEEO Manual, relevant IS Specifications, Departmental Specifications and the directions of the Engineer-in-Charge. | ||||||
| 2.01 | 50 mm dia (Light Class) (S/S) | 300 | Rmt | 498 ₹1,49,400 | 492 ₹1,47,600 Lowest | 635 ₹1,90,500 |
| 2.02 | 40 mm dia (Light Class) (S/S) | 300 | Rmt | 408 ₹1,22,400 | 394 ₹1,18,200 Lowest | 505 ₹1,51,500 |
| 2.03 | 32 mm dia (Light Class) (S/S) | 300 | Rmt | 323 ₹96,900 | 310 ₹93,000 Lowest | 385 ₹1,15,500 |
| 2.04 | 25 mm dia (Light Class) (S/S) | 300 | Rmt | 258 ₹77,400 | 247 ₹74,100 Lowest | 305 ₹91,500 |
| 2.05 | 20 mm dia (Light Class) (S/S) | 300 | Rmt | 196 ₹58,800 | 181 ₹54,300 Lowest | 225 ₹67,500 |
| 3.00Providing of G.I. Pipes conforming to IS:1239 (Part-I & Part-II), latest revision, ISI/BIS marked, of specified diameter and class (Light/Medium/Heavy) complete including all labour, FOR Shamshi, loading, unloading, carriage, handling, storage all leads and lifts, complete in all respects as per CPHEEO Manual, relevant IS Specifications, Departmental Specifications and the directions of the Engineer-in-Charge. | ||||||
| 3.01 | 50 mm dia (Light Class) (S/S) | 3,000 | Rmt | 486 ₹14,58,000 Lowest | 500 ₹15,00,000 | 505 ₹15,15,000 |
| 3.02 | 40 mm dia (Light Class) (S/S) | 5,000 | Rmt | 391 ₹19,55,000 | 365 ₹18,25,000 Lowest | 415 ₹20,75,000 |
Tender Value
₹44.9 L
EMD Value
₹89,774
Closing Date
17 Aug 2026, 5:00 pmClosed
Executive Engineer
Jal Shakti Division Kullu
SH Providing jointing and testing and permanent strengthening of exisitng water supply scheme Under PDNA
2026_HPIPH_140764_1
5218-67 Bhullang
Open Tender
Civil Works
Item Rate
60 days
Bhullang Bhunter
Please refer Tender documents.
6 documents required · 6 mandatory
₹2,000
Executive Engineer
₹89,774
19 Sept 2026
7 Aug 2026
18 Aug 2026
7 Aug 2026
17 Aug 2026
7 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundations, trenches etc.in all kind of soil in all leads and lifts such as pick work, jumper work in saturated/unsaturated soil including bailing out water, blasting work in hard/ soft rock or chiseling in hard/soft rock where blasting is prohibited in all lifts stacking the excavated earth not more than 3 mtrs clear from the edge of excavation and then returning the stacked soil in 15 cm layers when required into plinths sides of each deposited layer by ramming and watering and then disposing of all surplus excavated earth foundations etc., consolidating as directed within all leads and lifts and handing over the useable materials available from excavation to department free of cost as per direction of Engineer-in-charge with in all leads and lifts. | 158.13 | Cum | - | - |
| 2Providing, laying, jointing, lowering, aligning, fixing, testing and commissioning of G.I. Pipes conforming to IS:1239 (Part-I & Part-II), latest revision, ISI/BIS marked, of specified diameter and class (Light/Medium/Heavy) complete with all specials, G.I. fittings, sockets, bends, tees, reducers, unions, nipples, supports, hangers, nuts, bolts, washers, jointing materials including PTFE tape/hemp and approved jointing compound, cutting, threading, screwing, fabrication, making threaded joints, lowering in position, proper alignment, anchoring, hydraulic pressure testing, flushing, disinfection, trial run and commissioning, including all labour, tools & plants, machinery, loading, unloading, carriage, handling, storage, all leads and lifts, complete in all respects as per CPHEEO Manual, relevant IS Specifications, Departmental Specifications and the directions of the Engineer-in-Charge. | |||||
| 2.01 | 50 mm dia (Light Class) (S/S) | 300 | Rmt | - | - |
| 2.02 | 40 mm dia (Light Class) (S/S) | 300 | Rmt | - | - |
| 2.03 | 32 mm dia (Light Class) (S/S) | 300 | Rmt | - | - |
| 2.04 | 25 mm dia (Light Class) (S/S) | 300 | Rmt | - | - |
| 2.05 | 20 mm dia (Light Class) (S/S) | 300 | Rmt | - | - |
| 3Providing of G.I. Pipes conforming to IS:1239 (Part-I & Part-II), latest revision, ISI/BIS marked, of specified diameter and class (Light/Medium/Heavy) complete including all labour, FOR Shamshi, loading, unloading, carriage, handling, storage all leads and lifts, complete in all respects as per CPHEEO Manual, relevant IS Specifications, Departmental Specifications and the directions of the Engineer-in-Charge. | |||||
| 3.01 | 50 mm dia (Light Class) (S/S) | 3,000 | Rmt | - | - |
| 3.02 | 40 mm dia (Light Class) (S/S) | 5,000 | Rmt | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.54 MB
FORMSIX.pdf
Tender Documents • 0.40 MB
FORMEIGHT.pdf
Tender Documents • 1.43 MB
TERMANDCONDITION.pdf
Tender Documents • 0.40 MB
BOQ_208832.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .