New 33/11 KV Substation, 33KV and 11 KV line

Amount

Incresing Capacity (1x5 MVA to 2x5 MVA Transformer) SUPPLY OF MATERIALS

Bus bar Gantry

Terminal Gantry

33KV Pin with nut & Bolt

33KV Pin insulator

33KV line Isolator- 400 Amp

Structure for 33KV line Isolator

33KV Bus-Isolator 400 Amp

Structure for 33KV Bus- Isolator

33KV Fuse Set (Copper strip for 33KV Line)

33KV Fuse Set Structure

33KV Lightening Arrestor (3Nos. In a set)

Structure for 33KV Lightening Arrestor

33KV Post Insulator

Structure for 33KV Post Insulator

2.6 mtr MS Angle 65x65x6 mm

90 lbs, Rail pieces for transformer (44.64Kg/Mtr)

ACSR Dog Conductor

P.G. Clamp for Dog conductor

33KV Polymer Disc Insulator B&S With Fitting

11KV Incoming Switch Gear 'VCB' CTR-600/300/5A,350MVA

11KV outgoing Switch Gear 'VCB' CTR-200/100/5A,350MVA

11KV H.T. Cable 3x300mmsq XLPE

11KV H.T. Cable 3x185mmsq XLPE

Cu. Control cable 2x2.5 mmsq

Cu. Control cable 4x2.5 mmsq

Cu. Control cable 6x2.5 mmsq

Cu. Control cable 10x2.5 mmsq

LT Clamp for 8.5 mtr PCC Pole with nut bolt

Sodium LaMP 70 watt

ACSR weasal conductor

LT Schackle insulater with nut bolt

11KV XLPE Cable indoor Jointing kit 3x300 mmsq

11KV XLPE Cable outdoor Jointing kit 3x300 mmsq

11KV XLPE Cable indoor Jointing kit 3x185 mmsq

11KV XLPE Cable outdoor Jointing kit 3x185 mmsq

11KV T.P.M.O. Switch with fixing clamps

33 KV PT With Structure

PCC. Pole 8.5 mtr long

11KV Top channel 100x50x2240 mm

11KV MS Bracing Angle 65x65x6 mm 2700 mm long

11KV MS Bracing Angle 65x65x6mm clamp with nut bolt for 8.5 mtr PCC pole (Top side) by 50x8mm MS flat Iron make

11KV MS Bracing Angle 65x65x6mm clamp with nut bolt for 8.5 mtr PCC pole (Bottom side) by 50x8mm MS flat Iron make

Top Channel holding clamp with bolts & Nuts

Barbed wire G.I.

Danger Board and clamp with Bolts and Nuts

MS Earthing Rod 20x2500mm

E Bracket with Bolts and Nuts

11KV Polymer Disc Insulator T&C Type

11KV Disc Fitting T&C Type

11KV composite polymer Pin Insulator

P.G. Clamp For Weasal

Stay Rod 16x1800 mm

Stay wire 7x10 SWG

Stay clamp with nut and bolt for 8.5 mtr PCC pole by 50x8 mm MS Flat Iron make

Rubber Mat

11KV Fuse set with fixing clamps

33KV Top Channel 125x65x3200 mm

Sub Station Name & Arrow shine Board Comp.

Furniture Set of S/S (Two Chair, One Table, One Bench, One Stool.)

33KV VCB with Structure Double T/F with Control Pannel

33KV CTR 200/100/1A with C.T. Structure

24 (12+12 volt battery) with inverter & cabinet

PVC Cable 4x16 mmsq

Break- Down, Shut-Down, Roastering name board 4 Nos each with B.P. sheet

Fire Buckets stand with 4 No Buckets

Maximum/Minimum, Line diagram, Key board, Hand Gloves, earthing chain etc.

63KVA , 11KV/0.4KV Station T/F

S/S Base angle

Erection, Grouting of following fabricated structures as per Resspo Drawing.

33KV Bus bar Gantry

33KV Terminal Gantry

33KV Isolator structure

33KV L.A. structure

33KV Post insulator structure

33KV fuse set structure

33KV Line isolator complete

33KV Bus isolator complete

33KV L.A. (3 Nos L.A. per set)

33KV Post insulator complete

33KV fuse set complete

Construction of plinth for 5 MVA 33/11 KV Transformer of size (3.5x3.5x1.5)m (0.50 below ground level and 0.5 m above ground level) as per specificaction

Earth Mat Work

33KV Bus Bar Jumpering :

Installation of 33/11KV, 5 MVA Transforer as per specificaction

Installation of 11KV Switch Gears in Control Room:

Laying 11KV, (3x300) mmsq XLPE cable from power transformer to 11KV Incoming swith gear in the cable trench 0.45 m wide, 0.90m depth. Providing 150 mm local sand for cushion beneath and 150 mm above the cable (quantity of local sand required 0.375 cubm/m in length.) The cable shall be duly protected by brick. On both side of cable by laying brick vertically and bricks would also be laid horizontally on top of vertically laid bricks along the cable (minimum 18 Nos. of bricks per mtr. length are to be laid top and outer side along the cable.

Laying 11KV, 3x185 mmsq XLPE, Power cable from outgoing switch gear to 11KV double poles in the cable trench 0.45m wide, 0.90m depth. Providng 150 mm thickness local sand for cushion beneath and 150 mm above the cable (quantity of local sand required 0.375 cubm/m in length). The cable shall be duly protected by brick. On both side of cable by laying bricks vertically and bricks would also be laid horizontally on top of vertically laid bricks along the cable (minimum 18 Nos. per mtr. length are to be laid top and outer side along the cable.

Making of 11KV XLPE Heat shrinkable out door jointing kits after duly plubing and taping of cable providing, fixing and criping of proper size good quality lugs.

Making of 11KV XLPE heart shinkable indoor jointing kits in switch gears after carefully removeing the insulation of cable, providing and crimping of proper size of lugs, plumbing and taping of cable with good quality available insulation tape with Jointing kit boxes. Fixing and insulating of lugs on cable with switch gear complete in all respect.

Providing & wearing of 100 dia 3.5 mm long G.I. Pipe in the feeder cable of size of (3x185) mmsq XLPE Power cable before making the outdoor cable boxes. The work includes the sealing of G.I. Pipe, top end and lower end of the pipe is to be buried in to the ground about 1/2 m and proper dressing of cable etc. The work includes lifting, mounting and clamping of 11 KV feeder cable boxes on the feeder with double poles structure and making connections.

Installation of 24 V Battery and Battery Charger.

Copper Control Cable Laying of different size of (2x2.5) mmsq / (4x2.5) mmsq Armoured control cables i.e. from Buchholez realy to Marshalling box to indication protection board in switch gear room, 33KV CTs Junction Box, CT 33KV, VCB Control Panel, and capacitor Bank Junction Box to 33KV VCB control panel and control panel to 33KV VCB outdoor operatrion mechanism panel from T/F etc. in cable trench including making proper connectoin at Buchholez Relay, Marshalling box and indication board as per required for installed equipment.

Earthing of 11KV Switch Gears :

Erection and groutung of 33KV VCB Structure and Construction of plinth for the structure of 33KV VCB and Installation of 33KV VCB as per specificaction

Erection and groutung of 33KV CT Structure and Installation of 33KV CT as per following

Installation of 33KV control panel for VCB with complete earthing and respectively installation of battery and battery charger in control room and making connection.

Lighting Arrangement of 33/11KV Sub-Station outdoor switch yard and approch road ;

Construction of 11KV Double poles as per specificaction

Construction of Control cable and power cable trench as per specificaction

Tripping, Single line diagram, Protection and 33/11KV Sub Station Board as per specificaction

33KV Terminal Gantr/bus bar gantry

33KV Bus insolator and line Isolator structure

33KV L.A. structure

33KV Post insulator structure

33KV fuse set structure

63KVA , 11KV/0.4KV Station T/F

Writing of following particulars on 11KV pannel in English Script in Block letters with white enamel paint including cost of paints. Name for feeder on front & back side of pannel, Date of testing, Date of commissinoning & Date of Overhauling

Name of Sub-Station wrote in blue paints on yellow back ground in Hindi script.

Construction of approach road inside the switchyard 1.5 mtr wide with 1st class Interlocking brick work tipping complete work including cost of all materials.

Dimentilling of old electrical equipment structure etc.

Cartage & dismentiling of power T/f

Receive Back of 10 MVA (33/11KV) power T/F

Old & useable 11KV, 33KV Breaker, CT/PT 33KV panel

Iron Material as ascrep

(33 KV Line) SUPPLY OF MATERIALS

9 Meter long PCC Pole

ACSR DOG (0.95 X 3 + 3% )

33 Kv Composite Polymer Pin insulator

33 KV Disc Composite Polymer Disc Insulator

33 KV Stay Set 20 x 1800 mm

Stay wire 7/8 SWG

33 KV 'V' Type X-arm (M.S. Channel 100 x 50 x 6 mm.)

33 KV Cross arm holding clamp with nuts, bolts & washers

" E " bracket for 33 KV line

" F " bracket for 33 KV line

33 KV 3x300sqmm XLPE cable

33 KV 3x300sqmm Jointkit

33 KV Crossing by HDD pipe Double ckt (3x300sqmm)

M.S. Angle 65x65x6 mm, 4300 mm long for bracing with 4 nos clamps

M.S. Top Channel 125x65 mm, 3200 mm long with 2 nos clamps

M.S. Droper Channel 100x50 mm, 3000 mm long with 2 nos clamps

P.G. clamps for Reccoon/Dog

M.S. Nut, bolt with washer

33 KV Stay clamp

G.I. Barbed wire

G.I. Wire No. 5mm

M.S. earthing Rod of 20 x2500 mm

(33 KV Line) Erection of Work

9 Meter long PCC Pole

ACSR DOG (0.95 X 3 + 3% )

33 Kv Composite Polymer Pin insulator

33 KV Disc Composite Polymer Disc Insulator

33 KV Stay Set 20 x 1800 mm

Stay wire 7/8 SWG

33 KV 'V' Type X-arm (M.S. Channel 100 x 50 x 6 mm.)

33 KV Cross arm holding clamp with nuts, bolts & washers

" E " bracket for 33 KV line

" F " bracket for 33 KV line

33 KV 3x300sqmm XLPE cable

33 KV 3x300sqmm Jointkit

33 KV Crossing by HDD pipe Double ckt (3x300sqmm)

M.S. Angle 65x65x6 mm, 4300 mm long for bracing with 4 nos clamps

M.S. Top Channel 125x65 mm, 3200 mm long with 2 nos clamps

M.S. Droper Channel 100x50 mm, 3000 mm long with 2 nos clamps

P.G. clamps for Reccoon/Dog

M.S. Nut, bolt with washer

33 KV Stay clamp

G.I. Barbed wire

G.I. Wire No. 5mm

M.S. earthing Rod of 20 x2500 mm

Concreting of 33 KV Stay Rod 20x1800 mm. by providing of cement sand & Brick ballast in ratio 1:4:8

Grouting of Support (0.268 cuM each) providing of cement sand & Brick ballast in ratio 1:4:8

(11 KV Line) SUPPLY OF MATERIALS

Single PCC Pole 8.50 m long

Single T-Off PCC Pole 8.50 m long

V-type Cross arm 65x65x6 mm, M.S. Angle

ACSR Weasel conductor

MS Angle 50x50x6 mm, 3.0 mtr long for Bracing of double pole structure with Clamp

Top channel 100x50x2240 mm (10.70 Kg./mtr.)

MS Angle 50x50x6 mm, 3.0 mtr long for Droper of double pole structure with Clamp

11 KV Disc Insulator T&C type 45KN with fitting

11 KV Pin Insulator with fitting

11 KV Pin with nut

Complete Stay (GI stay rod 16x1800 mm, stay clamp, bolt, nut & washer)

Stay wire 7/10 swg

Earthing of pole by MS earthing rod of 20x2500 mm and 6 SWG earthing wire etc.

Cross arm holding clamp with bolts & nuts

Earth wire clamp with bolt & nut

E-bracket for 11 KV

F-bracket for 11 KV

Bolts, Nuts & Washers

3x185 sq mm Cable Jointing Kit I/D

3x185 sq mm Cable Jointing Kit O/D

Top channel clamp for 8.5 Mtr PCC Pole

T-off holding clamp for 8.5 mtr. PCC

P.G. Clamp for ACSR Weasel

11KV bus coupler 350 MVA

(11 KV Line) Erection of Work

Single PCC Pole 8.50 m long

Single T-Off PCC Pole 8.50 m long

V-type Cross arm 65x65x6 mm, M.S. Angle

ACSR Weasel conductor

MS Angle 50x50x6 mm, 3.0 mtr long for Bracing of double pole structure with Clamp

Top channel 100x50x2240 mm (10.70 Kg./mtr.)

MS Angle 50x50x6 mm, 3.0 mtr long for Droper of double pole structure with Clamp

11 KV Disc Insulator T&C type 45KN with fitting

11 KV Pin Insulator with fitting

11 KV Pin with nut

Complete Stay (GI stay rod 16x1800 mm, stay clamp, bolt, nut & washer)

Stay wire 7/10 swg

Earthing of pole by MS earthing rod of 20x2500 mm and 6 SWG earthing wire etc.

Cross arm holding clamp with bolts & nuts

Earth wire clamp with bolt & nut

E-bracket for 11 KV

F-bracket for 11 KV

Bolts, Nuts & Washers

3x185 sq mm Cable Jointing Kit I/D

3x185 sq mm Cable Jointing Kit O/D

Top channel clamp for 8.5 Mtr PCC Pole

T-off holding clamp for 8.5 mtr. PCC

P.G. Clamp for ACSR Weasel

11KV bus coupler 350 MVA

Concreting of 11 KV Stay Rod 20x1800 mm. by providing of cement sand & Brick ballast in ratio 1:4:8

Grouting of Support (0.268 cuM each) providing of cement sand & Brick ballast in ratio 1:4:8

M/S AMRIT ASSOCIATE

M/s Anil kumar singh

GANGA ELECTRICALS

Perennial Contractors Pvt. Ltd.

M/S Grid Power Systems

DEVYANSH CONSTRUCTION AND DEVELOPERS PVT. LTD.