GENERAL BSP Main Canal Surplus BSP Providing a screw driven mechanical shutter for the surplus escape of the Main canal at ch 2730 General Mechanical Work

Amount

Supply fabrication and erection of M S and S S embedded parts (SS 304L) Grade for MS shutter(size 2.0mx1.8m)

OD28081/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD28085/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD28084/2023-2024:Supply of MS round bar including cost of conveyance charges

OD28086/2023-2024:Fabrication, erection and commissioning of Structural steel Embedded parts in IS2062 Grade and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , incidental and handling charges etc complete but excluding cost of material already supplied

OD30003/2023-2024:Fabrication, Supply, erection and assembling of wheel track, sill seat and seal track in correct position and alignment by welding SS Embedded parts in 304L Grade as per approved specifications, drawings and directions of deptl officer at site including cost of all materials, labour, welding, shearing, grinding etc, lead and lift, conveyance, incidental, handling charges etc.

Supply of materials, fabrication, painting and erection of MS shutter

OD28091/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD28090/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD28089/2023-2024:Supply of MS round bar including cost of conveyance charges

OD28092/2023-2024:Supply of MS Bolts and Nuts

OD28088/2023-2024:Fabrication and supply of Structural steel wheel gate and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc. complete but excluding cost of material already supplied

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.111:Erection of the gates safely in the grooves , assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site

Supplying and fixing of flat type rubber seal at the bottom side and angular type at outer vertical side of MS shutter

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.117:Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Supplying and fixing 125 dia cast steel thrust rollers for MS shutter

OD28094/2023-2024:Supplying and fixing of cast steel wheel assembly consist of 125mm dia,50mm tread width 50mm roller axle(s.s),including cost of all materials, conveyance and labour charges etc. complete as directed by the departmental officer at site.

Supply of materials, fabrication, painting and erection of hoisting bridge and units for MS shutter

OD28099/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD28098/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD28097/2023-2024:Supply of M.S Bolt

OD28096/2023-2024:Supply of 32 mm dia GI pipes

OD28095/2023-2024:Supply of MS chequered plates including cost of conveyance charges

OD28100/2023-2024:Fabrication and supply of Hoisting Girder in structural steel confirming to IS2062Gr as per approved specifications and directions of deptl officer at site including cost of labour, machinery, incidental and handling charges for fixing handrails and allied works etc complete but excluding material already supplied.

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD28102/2023-2024:Fabrication & supply of Worm Reducer of ratio 1:12 with EN-8 pinion & Cast Steel wheel, case hardened with tapered roller bearing for pinion & thrust roller bearing for gear and with cover and all necessary accessories

OD28103/2023-2024:Providing EN-8 screw rod 7.5 tonne capacity 4.00M lift screw hoist having one number of EN-8 Screw shaft having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all material,labour,hire charges and conveyance

OD28241/2023-2024:Providing connecting shaft to connect two worm reducers (already supplied) of the operating mechanism including cost of GI pipe, coupling flange, handle for hand operating mechanism etc.

OD28106/2023-2024:Erection of the Canal Shutter ( up to 2 Tonne weight )/ hoist bridge/Platform including hand rails , ladder etc for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

Chipping and concreting of groove for embedded parts

OD30372/2023-2024:Chipping of cement concrete for embedded parts (groove size 500mm x 300mm and up to a length of 5.0m (including chipping for sill beam and top seal embedded parts) manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Bidder Name

JOBIN JOSEPH