Loading
Loading…
Loading…
Tender Value
₹10.4 L
EMD Value
₹20,900
Closing Date
28 Aug 2026, 6:00 pm3d left
GE 865 EWS
GE 865 EWS PIN-913865 C/o 56 APO
SPL REPAIR OF UNIT EXCHANGE BLDG NO TA 265 666 ARMY AVN SQN R AND O KARGIL UNDER AGE BRI OF GE 865 EWS LEH
2026_MES_783443_1
865/EWS(NIT-104)/2026-27
Open Tender
Civil Works
Item Rate
180 days
GE 865 EWS Leh
Pl refer tender documents
9 documents required · 9 mandatory
₹500
GE 865 EWS
₹20,900
Yes
8 Aug 2026
8 Aug 2026
5 Sept 2026
8 Aug 2026
28 Aug 2026
22 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling plain or corrugated steel /fibre sheeting any guage thickness including nanital or similar pattern complete all as specified and as directed, | 35 | Sqm | - | - |
| 2 | S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws as specified | 35 | Sqm | - | - |
| 3 | M&L for preperation of existing treatment on steel / CGI sheets of any description and applying two coat of synthetic enamel paint (galvanisatin should be removed if required) ,complete all as specified and as directed. | 80 | Sqm | - | - |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete all as specified and as directed. | 1 | Qtl | - | - |
| 5 | S&F MS Rolled sections in main and cross beams,hip and jack rafters ;purlins where connected to common rafters running rails and guids for sliding doors ;fixed with angle cleats or other connecting plates and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed. | 100 | Kg | - | - |
| 6 | M&L preparation of new untreated steel surfaces exc. 10 cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. | 17 | Sqm | - | - |
| 7 | Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as directed by Engr-in-charge. | 4 | Each | - | - |
| 8 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as directed by Engr-in-charge. | 7 | Each | - | - |
| 9 | S&F anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified. | 66 | Kg | - | - |
| 10 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc. complete all as specified. | 16 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.18 MB
BOQ_877786.xls
BOQ • 0.60 MB
TENDERNIT104.pdf
Tender Documents • 1.32 MB
CORR104.pdf
PDF • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].