Renovation and Extension of toilet in Store and Renovation of Gents Toilet F.F in Main Building, Gents toilet F.F. and Ladies Toilet G.F in Extension Building and a small toilet back side of Electrical Section at CSIR-NGRI, Hyderabad

Description of Items :

Part A- Civil Work-Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30cm in depth,1.5m width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.

Excavating trenching of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms depth upto 1.5m including getting out the excavated soil, then returing the soil as required, in layers not exceeding 20cm in depth including consoilidating each deposited layer by ramming watering etc., and disposing of surplus excavated soil as directed with in lead up to 50m: All Kinds of soil Pipes, cables etc exceeding 80 mm dia but not exceeding 300mm dia .

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All works upto First Floor 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roof, roofs having slope upto 15 deg, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3(1cement : 1.5coarse sand : 3 graded stone aggregate 20mm nominal size)

Centring and shuttering including strutting, propping etc. and removal of form work for: Suspended floors, roofs,landings and balconies and access platform

Centring and shuttering including strutting, propping etc. and removal of form work for: Lintels, beams, plinth beams, girders, bressumers and cantilevers, chajjas etc

Coursed rubble masonry (second sort) with hard stone in foundation and plinth with: Cement mortar 1:6 (1 cement : 6 coarse sand)

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand)

Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor III level. Cement mortar 1 : 4 (1 cement : 4 coarse sand)

15 mm cement plaster with 1:4 (1 cement : 4 coarse sand) finished smooth with sponge.

6 mm cement plaster to ceiling of mix: 1:3 (1 cement : 3 fine sand)

Add for plaster drip course/groove in plastered surface or moulding to R.C.C. projections.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing Ist quality Vitrified tiles gloss or matt finish conforming to IS : 15622 (thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black, of 1200 x 600 mm of size or different size but the covered area of one tile should be near to or the equal covered area of one of tile size 1200 x 600 mm means 0.72 SqM, as approved by Eningeer-in-Charge in skirting, risers of steps and dados over 12 mm to 20 mm thick or more as per site bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand ) and jointing with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. including pointing in white cement mixed with pigment of matching shade complete.( make of RAK, icon or equivalent premium tiles)

Extra cost for providing and fixing Highliter / Borders / Motif / dark colour like burgundy, bottle green, black etc wall tiles of all size as per wall tile specification. (make of RAK, icon or equivalent premium tiles)

Providing and laying Vitrified tiles matt finish floor tiles 1200x600 mm of or different size but the covered area of one tile should be near to or the equal covered area of one of tile size 1200 x 600 mm mean 0.72 SqM, machine cut eadge (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.( make of RAK, icon or equivalent premium tiles)

Providing and fixing Ist quality ceramic glazed wall tiles of size 300x600 or 300x450 conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Distempering with 1st quality acrylic washable distemper (ready made) of appproved manufacturer and of required shade and colour complete. as per manufacturer's spacification. a) Two or more coats on new work

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/10 sqm. over and including base coat of water proofing cement primer applied @ 2.20 kg/10sqm)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class African teak wood

Providing and fixing ISI marked flush door shutters (make of Raavela or equivalent) conforming to IS: 2202 (Part -I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35mm thick including ISI marked stainless steel butt hinges 3Nos with necessary S.S. screws.

Providing and fixing ISI marked flush door shutters (make of Raavela or equivalent) conforming to IS: 2202 (Part -I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30mm thick including ISI marked stainless steel butt hinges 3Nos with necessary S.S. screws.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (including Single / double glass panes, wire mesh and silicon sealent). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). upvc window 3 track

Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. ( including Single / double glass panes and silicon sealant). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling cement plaster/ tile work in floors, walls and wall/roofs laid in cement mortar including stacking material as per instructed by Engineer-in-charge For thickness of tiles 10 mm to 25 mm

Demolishing cement concrete manually /by meachanical means including disposal of material out side the campus and to remove the coal rock seperately and stacking as per instructions of Engineer-in-charge and dispose the dismantled/demolished un-useful materials along the compound wall in-side the NGRI campus as per instruction of Engineer-in-charge . 1:3:6 or richer mix

Demolishing brick work manually /by meachanical means including stacking of serviceable material and all lead and lift and stacking as per instructions of Engineer-in-charge and dispose the dismantled/demolished un-useful materials along the compound wall in-side the NGRI campus as per instruction of Engineer-in-charge . In cement mortar

Providing and applying two coat of Tapcrete with gry cement (1:2) as per manufacture specifications incliuding laying of fiber mesh over first coat of tapcrete. (Total treated area shall be measured for payment.)

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers:( Conplast X421 IC , Fosroc)

Providing & filling coal rock surkhi in floors at all levels including watering, ramming etc to complete the job.

Labour charges for filling of available coal rock surkhi in floors at all levels including watering, ramming etc to complete the job.

Making plinth protection 50mm thick of Cement conrete 1:3:6 (1 cement 3 coarse sand,6 graded stone aggregate 20mm nominal size )over 75 mm bed of dry stone aggregate 40 mm nominal size rammed, consolidated and grouted with fine sand including fnishing the top smooth.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with primer & wood filler of approved brand and manufacture.

Providing and fixing on wall/column face /under floor SWR pipe conforming to IS:4985 including jointing with seal ring conforming to IS:5382 including concrete bed or seddel of concrete mix 1:3:6 . use of Single or Double socketed pipes 110 mm diameter

Providing and fixing on wall/column face /under floor SWR pipe conforming to IS:4985 including jointing with seal ring conforming to IS:5382 including concrete bed or seddel of concrete mix 1:3:6 . use of Single or Double socketed pipes 75 mm diameter

Providing and fixing on wall/column/under floor face unplasticised-SWR moulded fittings/accessories for unplasticised-SWR pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm

Providing and fixing on wall/column/under floor face unplasticised-SWR moulded fittings/accessories for unplasticised-SWR pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. Coupler 110 mm

Providing and fixing on wall/column/under floor face unplasticised-SWR moulded fittings/accessories for unplasticised-SWR pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. Single tee with door 75x75x75 mm

Providing and fixing on wall/column/under floor face unplasticised-SWR moulded fittings/accessories for unplasticised-SWR pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110mm

Providing and fixing on wall/column/under floor face unplasticised-SWR moulded fittings/accessories for unplasticised-SWR pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. Single tee without door 75x75x75mm

Providing and fixing on wall/column/under floor face unplasticised-SWR moulded fittings/accessories for unplasticised-SWR pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. Single tee without door 110x110x110mm

Providing and fixing on wall/column/under floor face unplasticised-SWR moulded fittings/accessories for unplasticised-SWR pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. Bend 87.5 degree or required 75 mm bend

Providing and fixing on wall/column/under floor face unplasticised-SWR moulded fittings/accessories for unplasticised-SWR pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. Bend 87.5 degree or required 110 mm bend

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in-charge. Orissa pattern W.C Pan of size 580x440 mm

Providing and fixing wall hung wash basin with C.I./M.S brackets, 15 mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap.(Make of Hindware/ Cera/ jaquar or equivalent as approved by Engineer-in-chrage)

Providing and fixing wash basin (over counter) if required use C.I./M.S brackets or wash basin anchor bolt 15 mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever required: White vitreous China Wash basin size 410 to 450 x 315 to410 x150 to 195mm with suitable of 15 mm C.P. brass pillar sensor taps/lavatory faucet. (make of cear -Crespo or equivalent)

Providing and fixing white vitreous china flat back large type urinal basin of 365Wx335Dx670H mm and clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :(make of Cera-Calcia or equivalent as approved by the Engineer-in-charge)

P/F 12 mm thick compact board for urinal partition total height 90 mm , depth 450 mm including fixing with stainless steel L clamps with SS screws. (make of greenlam or equivalent)

Providing and fixing C.P pressmatic angle valve (make of Parryware / Jaqar or equivalent) for urinal points of approved quality conforming to IS:8931 15 mm nominal bore

Providing and fixing Chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain& brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the samd including testing of joints complete as per directions of Engineer-in- charge.( make of Ashirvad or Astral) Concealed work cutting chases and making good the wall etc. 20 mm dia. nominal outer dia. Pipes

Providing and fixing mirror of size 700 x 500 x 5 mm thick glass mirror with double coat for protection and longevity Grounded edges for safety and silver plating on the back for better reflection etc to complete the job. (make of cera Cat No. : B3510106 or equivalent as approved by the Engineer-in-charge.)

Providing and fixing Frames Full-Length Matty Brown or approved colour waterproof Fiber Wood/laminated board/WPC board Framed Wall Mirror (Mirror Size- 18 x 60 inch and Frame Size - 21 x 62 inch) including necessary backing of mirror, screws, studs etc whatever is required to complete the job.

Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make, weighing not less thant 105gms

Providing and fixing C.P. Health faucet with 1.5 metre flexible stainless steel hose as approved. (make of cera or Equivalent)

Providing and fixing unplasticised P.V.C. connection pipe with brass unions 45 cm length 15 mm nominal bore

Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (Make of Hindware/ Cera/ jaquar or equivalent as approved by Engineer-in-chrage) 15 mm nominal bore

Providing and fixing C.P Two in one brass bib cock of approved quality conforming to IS standards and weighing not less than 690gms. (Make of Hindware/ Cera/ jaquar or equivalent as approved by Engineer-in-chrage) 15 mm nominal bore

Providing and fixing UPVC multi drop floor trap including laying of cement concrete of 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of nominal size). 100mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia

Providing and fixing aluminium sliding door bolts ISI marked anodised(anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 300 x 16 mm

Providing and fixing aluminium tower bolts ISI marked anodised(anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete 200 x 10 mm

Providing and fixing aluminium handles anodised(anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete: 125 mm

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transpa- rent or dyed to required colour and shade with necessary screws etc as required. Twin rubber stopper

Providing and fixing square-mouth S.W. gully trap grade`A' complete with C.I. grating brick masonry chamber with bricks of class designation 50 and water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100 x 100 mm size P type With F.P.S. bricks class designation 100.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete. 25 to 40 mm nominal bore

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete: For pipes 100 to 230 mm diameter

Grading roof for water proofing treatement with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Cement mortar 1:4 (1 cement : 4 coarse sand) including neat cement punning and making 3mm wide and deep line on surface of 300x300 mm grid

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia Pipes

Providing and fixing 18mm thick gang saw cut mirror polished, premoulded and prepolished )machine cut for kitchen platforms, vanity counters ,window sills ,facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc., complete at all levels. Best quality fine texture Granite of any colour and shade ( Z Black, Telephone black or best equivalent) Area of slab over 0.50 sqm

Renewing glass panes, with Aluminum beading and PVC/neoprene gasket wherever necessary: Tinted glass panes (black or clear) of nominal thickness 4 mm (weight not less than 10kg/sqm)

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in Charge. For door/ window/ clerestory window

Providing and fixing white One piece toilet Bowl (P Trap) water closet with tank with tankrim(4.8L/3L) (European type W.C. pan) with soft close seat and cover and flush fittings fixture complete including cutting and making good the walls and floors wherever required: ( Make of cera -Cattler or equivalent)

Providing 25x3 mm flat iron hold fast 10 to 20 cm long including fixing to frame with bolts, nuts and wooden plugs and embedding in cement concrete block 15x10x15cm 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20mm nominal size).

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 25 mm average thickness

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make Fosroc or equivalent.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular/appropriate Z sections of approved make conforming to IS:733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necesssary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing and panelling to be paid for separately.) For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron

Cement Particle Board 12 mm thick Pre-laminated cement particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked of approved brand

Providing & fixing S.S. Bathroom Cylindrical Door Knob Lock one side lock set with Flat 75mm Rosette of approved quality with necessary screws etc complete.

Part B Electrical Work:- Supplying and Wiring for circuit wiring along with earth wire with 2x1.5 sq.mm +1x1.5 sq. mm size of FRLS PVC insulated copper conductor, single core cable in recessed PVC conduit and removing of existing wiring (Make: Finolex or equivalent ISI marked wire)

Supplying and Wiring for circuit wiring along with earth wire with 2x2.5 sq.mm +1x2.5 sq. mm size of FRLS PVC insulated copper conductor, single core cable in recessed PVC conduit and removing of existing wiring (Make: Finolex/ Equivalent ISI marked wire)

Supplying and fixing 3 modular GI box along with modular base and Covering sheet/covering plate for modular switches in recess, connection, painting, etc. as required. Make: Legrand(Mylinc) or equivalent

Supplying and fixing 8 modular GI box along with modular base and Covering sheet/covering plate for modular switches in recess, connection, painting, etc. as required. Make: Legrand(Mylinc) or equivalent

Supplying and fixing of 5/6 A Modular switch on the existing modular plate and switch box including connections but excluding modular plate etc. as required (Make: Legrand Mylinc model or it's equivalent ISI make)

Supplying and fixing of 15/16 A Modular switch on the existing modular plate and switch box including connections but excluding modular plate etc. as required (Make: Legrand Mylinc model or it's equivalent ISI make)

Supplying and fixing of 6 pin 15/16 A Modular socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (Make: Legrand Mylinc model or it's equivalent ISI make)

Wiring for light point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet , suitable size M.S. box and earthing point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required Group C

Supplying and Wiring for exhaust fan point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet , suitable size M.S. box and earthing point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required Group C

Supplying and fixing 36W LED Tube lights (Make: Cromption, Philips, Havells or it's equivalent ISI make)

Supply and installation of 9 inches exhaust fan with heavy duty (Crompton and Havells Make)

Supplying and fixing motion sensors (20A Capacity) Make: ISI marked

Supplying and fixing 20A switch type modular MCB to be fitted in the Modular box one in each

Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S screws of required length including cutting brick work and fixing in cement mortar 1:4(1 cement: 4 coarse sand) and making good the wall etc. complete. 110 mm

Ktij Enterprises Pvt. Ltd. (BID ID -848522)

SRI SAI CONSTRUCTIONS (BID ID -846459)