Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹20.0 L+₹4,498.25 (0.23%)Rejected-Finance 5021 1 CAT III MODERN HOUSING COMPLEX MANIMAJRA CHANDIGARH | CHANDIGARH | CHANDIGARH | 160001 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹20.0 L+₹7,385.55 (0.37%)Rejected-Finance HM 324 PHASE IX SAS NAGAR MOHALI PB | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹20.0 L+₹9,587.50 (0.48%)Rejected-Finance H NO 1420 SECTOR 15 PANCHKULA HARYANA 134113 | PANCHKULA | HARYANA | 134113 | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹20.3 L+₹39,321 (1.97%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R AND D Chandigarh
Garrison Engineer I R and D, DIHAR Base Lab, Ground Floor, Near 3 (BRD) AF Stn, Industrial Area, Ph-II, Ramdarbar, Chandigarh
WELCOME MAINTENANCE AND PETTY REPAIRS TO CERTAIN BUILDINGS IN DOMESTIC AREA AND ZONE-I AT TBRL RANGE RAMGARH
2022_MES_525409_2
GE I R AND D/CHD-25/2022-23
Open Tender
Civil Works
Item Rate
270 days
Ramgarh
As per tender documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandigarh
₹40,000
Yes
30 Aug 2022
6 Jul 2022
28 Jul 2022
6 Jul 2022
26 Jul 2022
19 Jul 2022
Amount
Material and labour for preparation of old treated plastered /unplastered surface of ceiling by brooming down and applying one coat of white wash complete all as specified and directed.
Material and labour for preparation of plastered or unplastered old distempered surfaces of ceiling including pilasters and cornices and applying one coat of oil emulsion distemper (any tint) on ceiling complete all as specified and directed.
Material and labour for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified and directed.
Material and labour for preparation of old treated plastered surfaces of walls by brooming down and applying one coat of oil bound distermper. complete all as specified and directed.
Material and labour for preparation of old treated plastered surfaces of wall and applying two coat of oil bound distermper. complete all as specified and directed.
Material and labour for preparation by complete removal of existing treatment of walls and applying two of oil bound distember complete all as specified and directed.
Material and labour for preparation of old treated plastered unplastered surfaces of walls by brooming down and applying one coat of cement base paint. complete all as specified and directed.
Material and labour for preparation of old treated plastered unplastered surfaces of walls by brooming down and applying two coat of cement base paint. complete all as specified and directed.
Material and labour for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for preparation of old steel surfaces of any description over 10cm girth or widhth no otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for writing letter or figures (block, Roman, Italic or Indian) n exc 30 cm high with black synthatic enamel paint complete all as specified and directed.
Material and labour for writing stops, commas, short lines, dashes, hyphens, brackets etc
Taking down shutters exe 1 Sqm but nexc 2.00 sqm each
Supply and fixing for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Supply and fixing for factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed..
Hacking out old broken glass(any thickness,size quality or description) from wooden/steel frames or stone concrete or brick surrounds glazed with putty or fixed with walls.
Supply and fixing for 3mm thick sheet glass ordinary quality with oil putty in square n exc. 0.5 sqm in each pane.
Supply and fixing for 4 mm thick figured sheet glass ordinary quality with oil putty in square n exc. 0.5sq m in each pane.
Supply and fixing for galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples fixted in repair complete all as specified and directed.
Supply and fixing for Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 300mm complete all as specified and directed.
Supply and fixing for Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 200mm
Supply and fixing for aluminium handles extruded aluminium alloy handles, fabricated type, anodised, size of handle in 150mm
Supply and fixing for mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.
Supply and fixing for Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of size 140mm complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL.
Material and labour for PCC 1:4:8 type D-2 using 40 mm graded stone agg.as in foundation or mass concrete
Material and labour for providing 40 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement complete all as specified and directed.
Material and labour for 75mm thick PCC 1:3:6 type C-2 as in plinth protection fixed even and smooth with out using extra cement
Demolition of brick work or stone /boulder masonary built in cement mortar including all quions , arches, pillar etc complete all as specified and directed.
Material and labour for brick work with subclass B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as speecified and directed
All as per serial item no 30.00 above but except brick complete all as specified and directed.
Taking down cement plaster on brick walls including hacking out joints, hacking for key, scrubbing down with water.
Material and labour for internal plastering 10 mm thick on fair faces of brick or concrete surfaces, in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed .
Material and labour for rendering 15 mm thick external using cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces complete all as specified and directed..
Material and labour for rendering 5mm thick cement plaster 1:3 on fair faces of concrete surfaces in ceiling complete all as specified and directed.
Material and labour for two coats of oil bound distemper over a coat alkali resistant priming paint on walls including preparation of new surfaces complete all as specified and directed.
Material and labour for applying two coats of white wash on ceiling including preparation of new surfaces complete all as specified and directed.
Material and labour for applying two coats of cement base paint on walls including preparation of new plastered surfaces complete all as specified and directed.
Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing coat) removing serviceable tiles to store & rubbish off the premises.
Material and labour for glazed ceramic tiles (coloured) 300x200x7mm/450x350x7 thick on vertical surfaces set, jointed in neat cement slurry and pointed with white cement mixed with pigment to match over 10mm thick rendering CM 1:4 complete all as specified and directed.
Material and labour for 600 x 600 x10 mm thick vetrified ceramic tiles laid, jointed and pointed with white cement mixed with pigment to match the light shade of tile all as specified and as directed over 15mm thick screed bed CM 1:6 complete all as specified and directed.
Material and labour for non - skid Ceramic coloured tiles 7 to8 mm thick jointed free square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed over 15mm thick screed bed CM 1:6 complete all as specified and directed.
Material and labour for PCC coloured chequered tiles with grey cement and pigment 25cm X 25cm X 25mm thick set & jointed in neat cement slurry as in path, pavement ,floors, etc. over 20mm thick screeding of CM 1:6 complete all as specified and directed.
Material and labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with 20mm thick screed bed in CM 1 :6 complete all as specified and directed.
Material and labour for chamfering half rounding of edges of cudappa/ granite slab as in platform vertical support and edge poloshing complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in stone,concrete wall and slabs complete all as specified and directed.
Taking up or down steel tubing 15 mm dia and connections, including cleaning for re-fixing or removal to store
Taking up or down steel tubing 20 mm dia and connections, including cleaning for re-fixing or removal to store
Supply and fixing for 15 mm bore GI tubing medium grade to walls, ceiling or laid in floors
Supply and fixing for 20 mm bore GI tubing medium grade to walls, ceiling or laid in floors
Supply and fixing for repair 15mm dia CP bib taps, fancy, Cast copper alloy with crutch or butterfly handle, screwed for iron pipe fixed.
Supply and fixing for repair 15 mm dia CP fancy type stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed.
Supply and fixing for repair 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts screwed for iron pipe. complete all as specified and directed.
Supply and fixing for PVC connections 15mm size with PTMT nuts of length 450 mm
Supply and fixing for repair Brass chromium plated shower rose 125mm size
Supply and fixing for repair Toilet paper holder, viperous China,coloured, box type fixed to walls with chromium plated (CP) brass screws
Supply and fixing for repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
Supply and fixing for repair Tubular towel rail 20mm dia, D type, 60cm long between flanges
Supply and fixing for repair vitreous China squatting pan, `Orissa' pattern, size 630 x450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.
Supply and fixing for repair PVC valveless, syphonic action type, flushing cistern 10 LTRS CAPACITY, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe complete all as specified and directed.
Supply and fixing for repair Vitreous China wash down water closet pan (pedestal pattern), white (including 6 mm dia 50 mm long fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut) with Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including PVC valveless, syphonic action type, flushing cistern 10 LTRS CAPACITY, low level, white, with inlet, ball valve, float and handle including brackets fixed in repairs with 32 mm PTMT Flush pipes to pedestal pan, including all joints complete all as specified and directed.
Supply and fixing for repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device
Supply and fixing for repair Vitreous China wash basin, white, flat back, size 450x300mm excluding taps, waste chain and plug and porcelain stopper but including brackets 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed.
Supply and fixing for repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm inclr 50 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed.
Supply and fixing for repair 20mm dia gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed.
Supply and fixing for repair 25 mm dia. gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed.
Supply and fixing for repair curtain rod anodised aluminium alloy with fixing bracket, stops, rollers complete all as specified and directed.
Supply and fixing for aluminium alloy anodised curtain brackets complete all as specified and directed.
Supply and fixing for in repair CP grating 110 dia
Dismantling water tanks of capacity exc 500 and n exc 1000 ltrs and removing to stote
Supply and fixing for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 ltrs.20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed.
Supply and fixing for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 ltrs.20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed.
Material and labour for two coats of synthetic enamel painting over a coat of pink primer including preparation of previously untreated surfaces of wood or wood based material exc. 10 cm width or girth complete all as specified and directed.
Material and labour for filleting work in CM 1:4 not exc 25 Sqcm
Material and labour for preparation of old decorated surfaces of walls and applying one coat of smooth exterior acrylic emulsion paint with putty where required complete all as specified and directed.
Material and labour 600 x 600 x10 mm thick vetrified ceramic tiles as in skiriting laid, jointed and pointed with white cement mixed with pigment to match the light shade of tile all as specified and as directed over 15mm thick rendering CM 1:4 complete all as specified and directed.
Material and labour for non - skid Ceramic coloured tiles 7 to8 mm thick jointed free as in skiriting squarere/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed over 15mm thick rendering CM 1:4 complete all as specified and directed.
M/s APEX ENTERPRISES
M/S MATLOOB AHMED
KUKREJA ENGINEERS
KUNDRA CONSTRUCTIONS
D.N.Gupta and Sons
M/s Krishan Aggarwal
SONA BUILDERS
GOODWILL ENGINEERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .