Supply, Installation and maintenance of SCADA system for Gudha Dam, District- Bundi (Rajasthan)

Local Control System for Gudha Dam (Part-A)

Supply of PLC/RTU system with software development of PLC/RTU, Control Panel with front door opening cabinet, fitted with Power buses, MCBs & modem. Suitable power supply to power up PLC/RTU panel, including 1 KVA UPS for Power back up of minimum 2 hours. 7” or above HMI display & Industrial type electrical fitting & cabling with suitable conduits complete for all related field instruments, as per technical specification.

Supply of Shaft Encoder based rotary position sensor with local digital Display & Proximity limit switches type Gate Position Sensors for indication and monitoring of Spillway gates, Intake Gates, Silt flushing gates including cabling & integration with PLC/RTU as per technical specifications.

Supply of 3 Phase VFD Starter panel of 7.5 KW for each motor of Dam gates which shall consists of VFD, S.P.P, MCB, OLR, Timer, Main Switches including cabling & Electronic Digital Indicator complete as per technical specifications.

Supply of Pan Tilt Zoom (PTZ) 36 X Optical and 12 X Digital Zoom; 2 Mega Pixel IP based (DIGITAL) camera, 500 meters. Night Vision (Multiple Intelligent Array system) in IP66 Weather Resistant Outdoor Metallic Housing. Outdoor weather resistant IP 66 including cabling required for monitoring. As per technical specifications.

Supply of LTE Surveillance IP based 3G/4G Bullet Camera with Sim Card Slot, 2 Mega Pixel 2 OR 4 Array/ 72 LED Color Camera. 6 or 8 or 12mm (according to site suitability) with storage facility of at least 24-hour video recording, in elegant metal Die cast housing. Outdoor weather resistant IP 66, for monitoring the gates operation at dam & head regulators complete as per Technical Specifications.

Supply of Water Level transmitter non-contact RADAR type having 15m range for measuring upstream level of head regulator. including all necessary cabling with suitable conduits & electrical fittings & mast complete as per technical specifications.

Supply of Water Level transmitter non-contact Ultrasonic type having 10 m range for measuring downstream discharge of head regulators. Including all necessary cabling with suitable conduits & electrical fittings & mast complete as per technical specifications

Supply of Water Level transmitter non-contact RADAR type having 35 m range for measurement level/discharge at remote monitoring stations, including all necessary cabling with suitable conduits & electrical fittings & mast complete as per technical specifications.

Supply of Datalogger/RTU with 2 channel input type with GPRS/GSM based telemetry for data logging & transmission of Real time data from level transmitters at River in the upstream of Dam, to SCADA system, with all relevant mounting accessories. as per technical specifications

Supply of intelligent field controller / RTU as early flood warning station with software development with metallic front door opening cabinet, fitted with GPRS/GSM modem & siren at specified location along with industrial grade electrical fitting & cabling with suitable conduits complete, as per technical specification.

Supply of solar panel, charger regulator, batteries, lightening arrestor with all connectors, cables and conduit for cables for providing uninterrupted power supply to instrumentation system, as per technical specifications.

Supply of Main PLC Controller system with firm ware based hot redundancy which shall include software development of PLC, Control Panel with front door opening cabinet, fitted with Power buses, MCBs & modem. All the Electrical fittings will be Industrial type. Including suitable switch mode power supply (SMPS), 12” or above display & interconnection with related remote PLC/RTU’s, complete as per technical specification.

Supply, engineering and development of customized SCADA software for complete System with life time licensed version as per technical specifications.

Supply of Master server which includes Server with server Rack and industrial grade monitor with USB, RS232/RS485, Ethernet Ports, OS Windows 8 or higher compatible to SCADA System complete as per technical specifications.

NETWORK VIDEO RECORDER (NVR) 32 Channel 1080 P Full HD, Real time Recording and Reviewing in Compression Format. With HDD. along with dedicated sufficient Hard Drive to have memory of at least 30 days as per technical Specifications.

Supply of IT Hardware which includes required Static IP, Router with modem, Switch, firewall system and A3 color printer as per technical specifications.

Supply of 80” LED Display/ DLP Video wall based System for monitoring of SCADA & surveillance system at Gudha Dam Control Room as per technical specifications

Supply of laptops & 4G/3G internet dongle along with Client SCADA software for remote viewing & monitoring of Complete SCADA system as per technical specifications.

Supply of online 3 KVA UPS with Battery system for power backup of Gudha Dam control room equipment’s including all necessary cabling & electrical fittings complete as per the technical specifications

Local Control System for Gudha Dam for Gudha Dam (Part-B)

Installation, testing & Commissioning of PLC/RTU system with software development of PLC/RTU, Control Panel with front door opening cabinet, fitted with Power buses, MCBs & modem. Suitable power supply to power up PLC/RTU panel, including including 1 KVA UPS for Power back up of minimum 2 hours 7 inches or above HMI display & Industrial type electrical fitting & cabling with suitable conduits complete for all related field instruments, as per technical specification.

Installation, testing & commissioning of Shaft Encoder based rotary position sensor with local Digital Display & Proximity limit switches type Gate Position Sensors for indication and monitoring of Spillway gates, Intake Gates, Silt flushing gates including cabling & integration with PLC/RTU as per technical specifications.

Installation, testing & commissioning of 3 Phase VFD Starter panel of 7.5 KW for each motor of Dam gates which consists of VFD, S.P.P, MCB, OLR, Timer, Main Switches including cabling & Electronic Digital Indicator complete as per technical specifications.

Installation, Testing & Commissioning & integration with NVR Located at Gudha Dam Control Room of Pan Tilt Zoom (PTZ) Cameras, 36 X Optical and 12 X Digital Zoom; 2 Mega Pixel IP (DIGITAL) Camera, 500 meters. Night Vision (Multiple Intelligent Array system) in IP66 Weather Resistant Outdoor Metallic Housing. Outdoor weather resistant IP 66 including cabling & conducting required for monitoring. As per technical specifications.

Installation, testing and Commissioning & integration of LTE Surveillance IP based 3G/4G Bullet Camera with Sim Card Slot, 2 Mega Pixel 2 OR4 Array/ 72 LED Color Camera. 6 or 8 or 12mm (according to site suitability) with storage facility of at least 24-hour video recording, in elegant metal Die cast housing. Outdoor weather resistant IP 66, communication with NVR located at Gudha Dam control room for monitoring the gates operation complete as per Technical Specifications.

Installation, testing & Commissioning of Water Level transmitter non-contact RADAR type having 15m range for measuring upstream level of head regulator. including all necessary cabling with suitable conduits & electrical fittings & mast complete as per technical specifications.

Installation, testing & Commissioning of Water Level transmitter non-contact Ultrasonic type having 10m range for measuring downstream discharge of head regulators. Including all necessary cabling with suitable conduits & electrical fittings & mast complete as per technical specifications.

Installation testing and commissioning of Water Level transmitter non-contact RADAR type having 35m range for measurement level/discharge at remote monitoring stations, including all necessary cabling with suitable conduits & electrical fittings & mast complete as per technical specifications.

Installation testing and commissioning of Datalogger/RTU with 2 channel input type with GPRS/GSM based telemetry for data logging & transmission of Real time data from level transmitters at River in the upstream of Dam, to SCADA system, with all relevant mounting accessories. as per technical specifications

Installation testing and commissioning of intelligent field controller/ RTU with software development with metallic front door opening cabinet, fitted with GPRS/GSM modem & siren at specified location, along with industrial grade electrical fitting & cabling with suitable conduits complete, as per technical specification.

Installation testing and commissioning of solar panel, charger regulator, batteries, lightening arrestor with all connectors, cables and conduit for cables for providing un-interrupted power supply to instrumentation system. As per technical specifications.

Installation, Testing & Commissioning of Main PLC Controller system with firm ware based hot redundancy which shall include software development of PLC, Control Panel with front door opening cabinet, fitted with Power buses, MCBs & modem. Including suitable switch mode power supply (SMPS), 12” or above display & cabling with Industrial grade type electrical fittings for related remote PLC/RTU’s, as per technical specification.

Installation, testing, Commissioning and development of customized SCADA software for complete System with life time licensed version as per technical specifications.

Installation, Testing & Commissioning of Master server with SCADA Software which includes Server with server Rack and industrial grade PC with USB, RS232/RS485, Ethernet Ports, OS Windows 8 or higher compatible to SCADA System complete as per technical specifications

Installation, testing & commissioning of NETWORK VIDEO RECORDER (NVR) 32 Channel 1080 P Full HD, Real time Recording and Reviewing in Compression Format. With HDD along with dedicated Hard Drive to have memory of at least 30 days as per technical Specifications.

Installation, Testing & Commissioning of IT Hardware which includes required Static IP, Router with modem, Switch, firewall system and A3 color printer as per technical specifications

Installation, Testing & Commissioning 80” LED Display/ DLP Video based System for monitoring of SCADA & surveillance system at Gudha Dam Control Room as per technical specifications

Charges for high speed synchronous internet connection (min. 8 mbps upload and download speed) & Static IP for Five years.

Charges for High speed 4G/3G internet dongle for laptop with Client SCADA software for remote viewing & monitoring of Complete SCADA system for Five years.

Installation, Testing & Commissioning of Online 3 KVA UPS with Battery system for power back up of Gudha Dam control room equipment’s as per the technical specifications

Operation & Maintenance and Comprehensive Warranty for Gudha dam, head regulator & remote monitoring station SCADA based system as per Price schedule after final acceptance of SCADA & Surveillance system. This includes replacement of material & consumable as & when required at bidders’ cost. The cost of Communication for GPRS & SIM charges for data transmission, maintenance and other related charges. Minimum one Service Engineer shall be placed at Gudha Dam Control room for Operation of SCADA & Surveillance system.

Training of the purchaser's personnel at the supplier’s plant and/or/onsite in assembly, start up, operation, maintenance and/or repair of the supplied goods. Course topics will include sensor calibration, Datalogger/RTU, PLC/RTU & SCADA configuration, data downloading, data retrieval, collection, Trouble shooting, processing maintenance requirements and procedure for equipment configuration, installation, site testing and commissioning including training kit containing course material in soft and hard copies.

Security guard without gun for watch and ward (24 hr.)

Construction of Control room & Gauge wells for SCADA at Gudha Dam (Part-C)

Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed: Ordinary rock

Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed: All kinds of soil

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. mm. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering and reinforcement including curing, compaction, finishing with rendering in cement sand mortar 1 : 3 (1 cement : 3 coarse sand) and making good the joints and Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-20 grade reinforced cement concrete. All work up to plinth level.

Filling in plinth with locally available river shingle under floors including watering ramming consolidating and dressing complete including cost of shingle sand.

Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand).

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor Three level in all shapes and sizes in : Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead upto 50 Mtr. and lift upto 1.5 Mtr.Supply& Stacking good earth at site complete including loading unloading & transportation etc.

Random rubble dry stone Kharanja under floor.

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor Three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc M20 grade Nominal Mix

Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor Three level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.

Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor Three level for : Columns, pillars, posts and struts etc.

Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor Three level for : Walls (any thickness) including attached pilasters, buttresses plinth and string course. Add extra for shuttering in circular work (in respective centering and shuttering items)

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor Three level.Thermo Mechanically treated bars(Tata/Sail)

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor Three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix

Plaster on new surface on walls in cement sand mortar 1 : 4 including racking of joints etc.complete fine finish 12 mm thick

Providing and fixing Ist quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour tile such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler power (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4).

P&F Ist quality vitrifed/porcelain polished tiles on floor,skirting and steps etc in different sizes (Thickness to be specified by manufacturer) with water absorption less than 0.80 % and confirming to IS:15622 of approved make in allnd shade, laid with 20 mm thick CM 1:4 including grouting the joints with white cement and matching pigment etc complete of size 600 x600 mm

Providing and fixing of UPVC casement fully openable windows (outward / inward): Outer Frame made from the Extruded UPVC Windows profile section of size 60w X 60h mm having outer wall thickness of 2.5mm (+/- 0.2mm) and three chamber constuction, White in finish, duly reinforced with 1.5mm thick GI section. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of accumulated water, if any, to outer side. Fix Mullion made of 60w X 80h mm UPVC profile section with steel reinforcement shall be provided in windows having 2 or more openable shutters, as per the requirement. Frame shall have co-extruded with EPDM/TPE-E gasket fitted in in-built groove of frame profile for proper air & sound insulation of the shutter. Shutter : The shutter of sliding window shall be made of 39w x 69h mm Extruded 3 box multi- chamber uPVC Window Profile Section of white colour having outer wall thickness of 2.5mm (+/- 0.2mm) provided with reinforcement of 1.5mm thick GI section duly mitered cut & thermal welded at all corners and fitted with uPVC glazing bead of size 22 x 20 mm with inner and outer co-extruded EPDM/TPE-E weather seal gaskets alongwith 6mm thick ISI make plain float glass. Mesh shutter (optional) shall be made of 39w x 69h mm Extruded 3 box multi-chamber UPVC Window profile section of white colour having outer wall thickness of 2.5mm (+/- 0.2mm) provided with reinforcement of 1.5 mm thick GI section duly mitered cut & thermal

Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.)With float glass panes of 8 mm thickness

Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) stone doors windows and ventilator frames of approved quarry : size 100 x 75mm

Providing and fixing external grade boards ,solid core single leaf flush door sutters IS : 2202-67 marked using phenol formal dehydreresin glue both sides with approved steel fittings complete as per annexure 'A' 35 mm thick commercial veneer voth side .

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete

Painting exterior sutface of wall with 100 % acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including with prepration of base with sand papering, primer, putty etc complete in all respect : New Work

Providing and fixing 50 mm dia G.I. Medium 'B' class railing with two horizontal pipes and 1.5 Mtr. Long vertical pipe 1.5 Mtr. Centre to centre with all accessories, like elbows, tees etc. including welding, thereading and embedding in cement concrete 1 : 2 : 4 block of size 30 x 30 x 40 cm. with 2 Nos. angle iron 25 x 25 x 5 mm size holdfast complete as per design and drawings.

P & F Ist quality W.V.C. urinal (IS: 2556 Mark) with 25 mm dia GI pipe, dome waste coupling,concealed iron brackets or screws etc complete Flat back (large) or half stall size 610x400x80 mm

P&F white vitreous china double syphonic European WC (IS:2556 Mark) with mounted WVC flushing cistern (IS: 2556 Mark) of 10 liters capacity complete with all necessary internal fittings including cutting and making good the wall and floors (ISI Marked with superior quality of approved make)

P&F Water closed seat covers with brass hingscomplete .solid PVC (ISI marked ) grade I white for EWC

Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651 marked) of approved make with spun yarn & stiff mixture of cement mortar 1:1, excavation & refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete.150mm dia

&F WVC wash basin (Ist quality ,IS : 2556 mark)of approved make with C.I. Brackets duly painted ,1 No. 15 mm C.P. Piller cock (IS : 8934 mark) & 32 mm C.P. brass waste coupling of approved make , 25 mm G.I Waste pipe complete including cutting & making good the wall : Size 580mm x 450mm (ISI Marked with superior quality of approved make)

P&F Grating of approved quality/ make stainless stell sheet Heavy quality of approved make 125mm

P & F Pillar Cocks (IS:8934 Mark) of superior quality and approved make :C.P. Pillar cock, Swan-neck with casted spout, 15 mm nominal bore.

P&F Beveled edge mirror of special glass of approved make (Atul / equivalent )complete with 6 mmm thick asbestos cement sheet ground fixed to wooden screws & washers .Size 600mm x 450mm x 4mm thick

P&F Acrylie toilet accessories set consisting towel rail ,shelf ,towel ring ,soap dish ,paste & brush holder & twin peg of approved quality/make .

P&F Jet spray for water closet with C.P Coper Tube flange of approved make .

P&F Piller cock (IS : 8931 mark) superior quality of approved make : CP Piller cock , 15 mm dia nominal bore

P&F Bib cock (IS : 8931 mark) superior quality & of approved make brass wt. 400 gm 15 mm .

P&F stop cock (IS : 8931 mark) superior quality & of approved make : brass wt. 400 gm. 15mm.

P&F Inlet connection (Angle Values)Superior quality of approved make C.P Inlet connection 15 mm

P&F 15mm dia connection pipe of approved quality /make PVC pipe with nuts 450 mm.

P&F mixing range (15mm )C.P. Wall mixer telephonic type crutch & telephonic shower.

P&F PVC storage tank confirming to (IS : 12701 marked indicating BIS license no.) standards of approved make with cover ,25 mm dia 1 mm long GI overflow pipe & 25 cm.long wash out pipe with plug & socket ,including making connection etc. complete of approved disign , 500 litre capacity

P&F GI pipes (external work)with GI fitting (IS : 1239 mark) including trenching & refilling earth etc.

15 mm dia nominal bore ,'B' class

24 mm dia nominal bore ,'B'Class

P&F rigid PVC pipe (IS : 4985 mark) class II /(4 Kg./cm2)approved quality / make including jointing the pipe with solvent cement rubber ring and lubricant : 110 mm dia .

P&F rigid PVC pipe fitting (IS : 4985 mark) of approved quality / make including jointing the pipe with solvent cement rubber ring and lubricant

Coupler (Socket)

Plain Tea

Door Tea

Vent cowel

Pipe clip

P-trap

Gully trap

Reducer 110 x 75

P & F W.V.C. Urinal Partition plate of approved standard make of size 630x315 mm including making good the wall.

Providing and fixing 1.00 mm thick mica of approved make for innwe/outer side of flush door shutterswithfevicol and nails complete as per requirement & approved by engineer-in-charge

Providing and fixing stone slab table rubbed15-18 mm thick in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Bhaislana, Abu ,Kishangarh Zebra(Black Marble) up to 1500 Sq cm.

Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required.(GROUP I)

Short point (up to 3 mtr.)

Medium point (up to 6 mtr.)

Long point (up to 10 mtr.)

Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box with earth terminal, screwless cage connectors for neutral looping in switch board , 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required.

S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit with Wire mesh and making good the same as required.

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.(Group I)

2 x 2.5 sq. mm. + 1x1.5sqmm

2 x 4 sq. mm. + 1x2.5sqmm

2 x 6 sq. mm. + 1x2.5sqmm

P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.(Group I)

Single pole MCB 6 A to 32 A rating

Triple pole MCB 40 A 63 A rating

SITC of quick make and quick break 3 pole current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip , earth fault trip, push ( test ) to trip, including making connections with lugs / spreaders, etc. as required.

P&F recessed/ surface mounting heavy duty Vertical type 16 SWG sheet steel Distribution board with provision of incomer suitable for MCB / RCCB and SP / TP MCB as outgoing , phophatised ,powder painted complete with insulated suitable rating copper bus bar , neutral link, earth link and din bar, masking sheet,conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required.(GROUP I)

P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required.(Group I)

P & F ISI marked socket size flush type 120/280 watt rotary 5 step fan regulator including making connection testing etc. as required.(Group I)

P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required.(Group I)

Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required.(Group I)

P & F of recess mountmg CR luminaire made from powder coated CRCA sheet with Lperforations on the body with metalisedpolystrene louvers, complete with accessories Lextra low watt loss copper ballast, starter, — holder, condensor, terminal block duly prewired Lwith copper conductor including making — connections, testing etc. as required (without Llamp).

Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 25 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.

S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.

P&F of Heavy duty capacitor start, Double ball bearing 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required.(Group I)

P & F star rated double ball bearing capacitor start, aluminium body & blade ceilling fan with down rod up to 30 cm with 3 x1.5 sq.mm pvc insulated flexible copper conductopr making connectiontesting etc. as required. (GROUP-I)

P&F metal clad industrial plug top & socket unit with pin and sleeve type contact on porcelain/ bakelite base in sheet steel enclosure (without MCB) including making connections with lugs, testing etc.as required.(Group I)

Single / Double Pole (Three pin)

Three / Four pole (Five pin)

P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.(Group I)

S & Laying following size' B ' class G.I. Pipe confirming to IS : 1239 P - 1 ( 1990 ) with accessories for laying earth conductor/strip / cable in ground/surface/recess as required

P&F 18 swg MS recessed fan box hexagonal/round of size 30 mm, depth 75 mm, 12 mm dia rod fan hook with 100 mm length extended on each side

Curtains {Zebra Blinds (Net+ Fabric) with accessories and fixing and installation

Providing,supplying and assembling of 12 mm thick duly toughened glass for partition with openable door including all necessary hardware made of stainless steel, silicon filling as required complete making floor and wall good in all respect as directed by engineer incharge.

Table type 3 (storage provided one side,length of table top-1200 mm, depth of table top-600 mm)

Chair type 4 {chair type with arms,frame type 4 legs,castors without (inclusive of all taxes)}

SITC of air coooled split air type air conditioner complete with indoor unit (IDU) outdoor unit (ODU) surface/concealed copper refrigent piping with insulation (EP foam pipe section) upto 3 m (IDU to ODU),copper power cable upto 4 m (IDU to ODU) R-22/R-410 refrigent,remote suitable for 400/230 V +10% of 50 HZ, 1/3 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with scroll/reciprocating/rotory compressor as specified Hi wall/Ceiling wall split 1.5 TR with 3 star rating of BEE

Structural steel work rivetted, bolted or welded in built up section, truss and framed work, including cutting and hoisting ( Heightupto 10 m) fixing and position and applying a primimg coat of approved steel primer all complete.

Providing sofa set(Frame covering fully upholstered, Total No of seats in sofa set -4, covering material for seat and back rest-leatherite)

Providing center table (size 3 x 1.5 feet wooden center table)

Providing Fridge (Indian standard latest for direct cool with ISI marked, storage volume (Net capacity liters)-190, built in voltage stabilizer-yes, direct cool method of defrosting, power saver compressor, copper coil material, metallic type of finish)

RO (IS:14724 Latest) for water purification system with ultravoilet disinfection, 2 Nos of float valves/sensors, electrically operated reverse osmosis based water purifier, Input water TDS-1000, output water capacity(liters/hr)-25,arsenic and flouride removal capacity-yes, Thin film composite membrane-Yes, raw water/chemical raw water/chemical cleaning pump-Yes, pre-filter vessel-Yes, No of candles-2, warranty period(for free replacement of machine)-2 years, warranty period( for scope including free of cost candle and activated carbon on site replacement twicw a year)-2 years,chlorine and flourine removal facility-yes with pump

Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Providing & laying Chequered terrazzo tiles of approved make 22mm thick with marble chips of size upto 6mm, in floors, jointed with neat cement slurry mixed wit pigment to match the shade of tiles including rubbing and polishing complete in all respect as per specification, on 28mm thick bed of C.M. 1:4 : Ordinary cement without any pigment.

Supplying and fixing of chain link fencing with angle iron posts 50x50x6mm placed at every 3 Mtr. apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with (50 x 50 x 6cm) angle iron provided and fixed and fitted with posts including earth work in excavation etc. complete with chain link size. 75mm x 15mm x 3.15mm

M/S GA INFRA PVT LTD