PROVN OF RETAINING WALL AND SPL REPAIR TO GE OFFICE UNDER GE CLEMENT TOWN

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

Demolition of brickwork or stone/boulder masonary, built in lime mortar including quoins, arches, pillers etc, but excluding ashlar facings, dressed stone work and precast concrete article built in cement mortar or cement lime mortar complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc complete all as specified and directed.

Taking down chowkats or frames n exc 1.5 sqm with shutters(without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm with shutters(without taking off shutters from the frames) complete all as specified and directed.

S&F 6mm thick PVC designed panel (approved by GE) for false ceiling including frame work of aluminium rectangular hollow section of size 40 x 25 x 1mm thick & 1200mm x 1200mm c/c along walls and fixing PVC chanel complete all as specified and directed.

M & L Brick work with subclass B bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L PCC type C1, 1:3:6 (20mm graded stone aggregate) as in coping apex stone, bed plate etc complete all as specified and directed.

M&L Providing cement concrete type B1, (1:2:4 ) using (20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L Dura stone of approved make of size 330x330x8mm thick as in floor over and including 15mm thick screed bed in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L 18 to 20 mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed stainless steel wire staples/xpm complete all as specified and directed.

S & F 4.8 mm sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

S&F aluminium anodized powder coated door shutter with frames of size - 40x45x1.8mm including 5mm thick tinted glass and 4mm thick ACP sheet as required duly screwing with frame including necessary joints cleats, glazing clips rubber packing, snap beading, and suitable SS handle of length not less than 1 feet. The necessary fitting shall also be included such as Tower bolt, SS butt hinges, mortice lock 4 lever with 65mm latch size including aluminium anodized door frame of size 60x40x1.8mm thick fixed to wall with necessary screws and plug also included hydraulic door closer for shutter, complete all as specified and directed.

S&F mild steel framed work as in grills, gratings etc with ends of bars shouldered and riveted or forged into spikes, framed guard bars, barred iron doors etc, conforming to Fe-290, Gde-E-165 complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors complete all as specified and directed.

M & L 15mm thick rendering (1:4) on fair faces of brick work or concrete surfaces finished even and smooth complete all as specified and directed.

M & L 15mm thick rendering (1:6) on fair faces of brick work or concrete surfaces finished even and smooth complete all as specified and directed.

M & L preparing new surfaces and two coat of OBD over a coat of 2 mm thick Birla white putty complete all as specified and directed.

M&L Complete removal of existing treatment to wall and applying one coat of wall putty 1mm thick (internal or external ) on walls internal or external surfaces and two coat of OBD on wall surface in any height complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of weather proof exterior emulsion paint over a coat of primer on wall surfaces complete all as specified and directed

M&L Preapration of old surafces of walls and applying two coat of weather proof exterior emulsion paint complete all as specified and directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc., to store and rubbish not exc. 50m complete all as specified and directed.

S & F Stainless steel alphabets size 200mm x 150mm x 50mm fixing on wall complete all as specified and directed.

M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, over and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. Make : Kajaria (premier quality) , Orient

M&L glazed ceramic coloured tiles 450x300X7mm in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. Make : Kajaria (premier quality) , Orient

Taking up or down steel tubing and connection of 15mm dia complete all as specified and directed.

Taking up or down steel tubing and connection of 20mm dia complete all as specified and directed.

S & F 15mm dia GI tube medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F 20mm dia GI tube medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills sunshades, shelves lintels etc and cutting chases for concealed water pipe etc and making good cutting not exc 10cm girth complete all as specified and directed.

S & F in repair PVC low level flushing cistern 10 ltr capacity white colour incl with inlet ball, valve, float and handle including bracket, flush pipe of polyethylene of low or high density or PVC pipe 32mm dia for low level cistern complete all as specified and directed.

S & F in repair Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S & F in repair Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with CP Urinal spreader, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan (Pedestal pattern) with matching seat cover, excluding fixing bolts, flushing cister and flush pipe complete all as specified and directed.

S & F in repair 15mm fancy type chromium plated Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repair 15mm long body fancy type chromium plated Stop valves, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type CP with long shank and cup (concealed type) complete all as specified and directed.

S & F in repair 15mm fancy type chromium plated Stop valves, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type complete all as specified and directed.

S & F in repair 15mm dia and 450mm long connection pipe with PTMT nuts at both ends complete all as specified and directed.

S & F in repair fancy type chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed but fancy type complete all as specified and directed.

S & F 15MM dia PVC health faucet complete all as specified and directed.

S & F PVC soap dish approximate size 160 x 160 x 90mm complete all as specified and directed.

S & F swivel shower of PTMT any colour for fixing with 15mm pipe (min weight 40 gms) complete all as specified and directed.

S & F Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repair waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms) complete all as specified and directed.

S&F in repair 110 mm dia PVC(SWR) pipe single socketed in any length with rubber ring joints laid in trenches ,in floor or fixed to wall including necessary clamps complete all as specified and directed.

All as per item No. 52 above but 75 mm dia pipe complete all as specified and directed.

S&F in repair PVC bends any radius 110mm bore complete all as specified and directed.

All as per item No. 54 above but 75 mm bore complete all as specified and directed.

S & F 110 mm PVC (SWR) junction single, door (Single T) equal or unequal complete all as specified and directed.

S & F 75 mm PVC (SWR) door bends any radius complete all as specified and directed.

S & F 125/110 mm PVC (SWR) P Traps long arm complete all as specified and directed.

S & F 75 mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement complete all as specified and directed.

M&L RCC (Nominal mix) type B1, 1:2:4 (20mm graded aggregate) for deck slabs in shelves complete all as specified and directed.

Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves etc complete all as specified and directed.

M & L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Excavation in trenches n. exc 1.5m wide and 1.5m deep in soft/loose soil as in foundation including forming bottom surface to required level and slope complete all as spfd.

M&L for PCC type D2 (1:4:8) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for walling of random rubble , uncoursed , well bonded,bedded and solidly hearted , built in cm (1:6) complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on Stone masonary surfaces ,finished even and smooth surface complete all as specified and directed.

Returning filling in trenches in layers n. exc 25cm thick, watering, well ramming complete in soft/loose soil complete all as specified and directed.

M&L for precast cement concrete type C1 (1:3:6) as bond stone for RR stone masonery wall of any section indicated with plain fair faces including chamfers, weatherings, throating etc and set in CM 1:4 complete all as specified and directed.

Removing of surplus soil to a distance n.exc 50 M and depositing where directed at a level n. exc 1.5M above the starting point complete all as specified and directed.

M&L for PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in benching channel, coping of drain etc complete all as specified and directed.

M&L for pre-cast type B-1 (1:2:4) 20mm graded stone aggregate ) as in cover slabs for drain etc set in cm (1:6) complete all as specified and directed.

M&L MS deformed bars 10mm dia & over cut to length bent to shape required including cranking bending spirally for hooping columns, hooking ends and binding with and including mild steel wire ( annealed ) not less than ( 0.9mm dia or securing with clips complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone agg) as in bed to pipe including packing under and huching against the sides of pipes after they are laid and tested for 150mm dia pipe complete all as specified and directed.

M&L for slat glazed stone ware (SGSW) drain pipe grade 'A' 150mm bore laid in trenches and jointed complete all as specified and directed.

Cutting into existing maholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and farming branch channel in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching of dia 150mm complete all as specified and directed.

KAPOOR ELECTRICALS

M/s RK ENTERPRISES

High Tech Metal India