Development of Approach Road and Improvement of amenities for Eco Retreat 2026-27

Providing, laying, spreading & compacting graded stone aggregate to wet mix macadam specification including premixing the material at OMC in mechanical mix plant, carriage of mixed material to site, laying in uniform layers on well prepared surface & compacting to achieve the desired density including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause -406 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing Primer Coat with bitumen emulsion on prepared granular surface, spreading @ 0.60kg / sqm using mechanical means including cost, conveyance of of bitumen emulsion & cost of all labour, machinery etc

Providing Tack coat with bitumen emulsion on prepared bituminous surface, spreading @ 0.20kg / sqm using mechanical means including cost, conveyance of bitumen emulsion & cost of all labour, machinery etc complete as per Technical Specifications and Clause -501 & 503 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing & laying Bituminous Concrete of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen, preparing preemixed materials with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per clauses 501, 503 and 507 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Engagement of Hydraulic excavator including pol and operator with all T & P etc complete for shifting of sand in 10 mtr width from seabach side and filling, cutting, levelling etc

Fly ash brick masonry in all floors with cement mortar (1:6) using bricks of 25cm size, after immersing Bricks before use with watering, curing etc. complete including cost, conveyance, royalties, taxes of all materials, cost of all labour, all T&P etc. complete in all respect as directed by the Engineer-in-charge.

Providing 12 mm thick C.P. with C.M. (1:4) with punning using sand for mortar and finished smooth including Punning, watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Painting two coats with approved weather seal paints of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.

Excavation of foundation trenches in hard soil/ gravelly soil by manual means including dressing of sides & levelling the bed up to the required depth and depositing the excavated materials away from the work site within initial lead & lifts including cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause -304 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Sand filling in Road work & foundation of structure including cost, conveyance, royality of sand & cost of all labour etc complete as as per approved Drawing & Technical Specifications and Section - 2100 & Clause-304 of MoRT&H Specifications for Road & Bridge works (5th Revision).