Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹10.3 LAdmitted-Finance | -26.99% | ₹10.3 L | L1 | Admitted-Finance |
| 2 | L2₹10.6 LAdmitted-Finance | -24.99% | ₹10.6 L | L2 | Admitted-Finance |
| 3 | L3₹11.8 LAdmitted-Finance | -16.81% | ₹11.8 L | L3 | Admitted-Finance |
| 4 | L4₹13.9 LAdmitted-Finance | -2.00% | ₹13.9 L | L4 | Admitted-Finance |
Tender Value
₹14.2 L
EMD Value
₹28,300
Closing Date
9 Apr 2026, 6:00 pmClosed
EE PHED DISTT DIV II JODHPUR
EE PHED DISTT DIV II JODHPUR
COMMISSIONING OF CWR AND CONSTRUCTION OF PUMP HOUSE WITH INSTALLATION OF PUMP MACHINERY AT VILLAGE POPAWAS UNDER MLA LAD BUDGET HEAD
2026_PHCJO_547994_1
NIT NO 109(02)/2025-26
Open Tender
Civil Works
60 days
EE PHED DISTT DIV II JODHPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
EE PHED DISTT DIV II JODHPUR
₹28,300
Yes
17 Apr 2026
23 Mar 2026
10 Apr 2026
23 Mar 2026
9 Apr 2026
23 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 2PHED BSR 2023/ 8.1/ Construction of Pump house of brick/ stone masonry of required size suitable for installation of maximum 4 no. Monoblock pump sets as per approved GA drawing, scope of work and technical specification complete work in all respect including electrical works for lighting and fans, rain water drainage. The plinth area of pump house shall be area of measurement. | ||||||
| 3 | 6 x 4 Mtr | 24 | Sqm | - | - | BI01010001010000000000000515BI0100001113 |
| 4PHED BSR 2023/ 5.1.2.2/ Providing, installation, testing and commissioning of Centrifugal Monoblock pump set conforming to IS 9079 , 2 pole motor operating at synchronised speed of 3000 RPM with requisite MOC impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type and Pump set shall be suitable for working at various discharge and head requirements as per scope of work. Pump shall be erected on C.C. foundation / cross channels / RSJ frame block with suitable foundation bolts grouted in C.C. foundation block etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD. | ||||||
| 5Centrifugal Monoblock Pump set (Double Stage) | ||||||
| 65.5 KW (7.5 HP) | ||||||
| 7SITC STAR DELTA Starter type LT Panel of following rating: all switchgears are of PHED approved makes, CRCA sheet of Panel enclosure is of TATA/ Essar 1.6mm/ 2.0mm thick duly Electrostatic Powder Coated with angle frame including other ancillaries ( Insulators, Acrylic Sheet , Backlight Sheet, Hardware, Wire, Name Plates, Lugs, Pvc Channel , Mcb Chanel , Lock, Hing , Bidding , Connectors, Neutral Links , Spiral , Saddle & Packing Material ) etc. and 100A/ 125A ,TPN, Aluminium Bus Bar with Colour coated heat shrinkage sleeves complete as per Technical Specifications and as per direction of Engineer-In-Charge. | ||||||
| 8 | PHED BSR 2023/ 7.2.1/ STAR DELTA STARTER 7.5 KW (10.0 HP) - : For 2 motors (1 W+ 1S)
I/C - MCB 63A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 60/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and
O/G- MCB 32A ,TP, 10 KA, C Curve (2), Power Cont 18A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (7-10A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 5Kvar (2), S/D Timer(2) | 1 | Each | - | - | BI01010001010000000000000515BI0100001113 |
| 9PHED BSR 2023/ 6.3.1.2/ Providing, lowering, aligning, fixing in position in pipe line, CI double flanged swing type Non Return Valves (NRV) of approved make of following Pressure rating & dia complete, confirming to IS: 5312 (part -1)/ 2004 (amended up to date) and of following specifications: Body, Cover & disc of Grey cast iron of IS:210/ FG200. Face to face dimensions as per IS 5312 (part -1):2004 , Flanges Drilled as per IS:1538. Epoxy (Non-Toxic & suitable for drinking water) applied on body, cover and disc inside and outside . Body seat ring of SS/CS Door face ring - EPDM/ Neoprene (food grade quality) ,Shaft of SS- AISI- 410 ,Hinge Malleable cast iron / SS AISI 316 ,Bonnet Gasket EPDM, Bush- Leaded tin Bronze/ PTET, Gasket EPDM/NBR ,Nut-Bolt as per IS:1363 and IS: 1367 (galvanised steel) ,Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. | ||||||
| 10 | 100 mm Dia | - | Each | 7,973 | - | BI01010001010000000000000515BI0100001113 |
| 11PHED BSR 2023/ 6.1/ Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less body passage of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - AISI- 410 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel Insertion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. | ||||||
stage.html
html • 0.03 MB
technical_977120.pdf
techsummary_977120.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.22 MB
TD10902SPP.pdf
Tender Documents • 3.04 MB
BOQ_977120.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid