Annual Maintenance to TTD Kalyana Mandapams at Manopad in Jogulamba Gadwal District (1 No), Parigi, Doma & Kodangal in Vikarabad District (3 Nos), Dubbaka, Mirdoddi, Doulthabad & Bejjanki in Siddipet District (4 Nos), Medchal in Medchal Malkajgiri District (1 No) & Wanaparthy in Wanaparthy District (1 No) for the year 2026-27.

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead - Brick work

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

Demolishing and disposal of unserviceable materials within 100 metres lead - Unreinforced cement concrete up to 15cm thickness

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

Supply of the following Semi-Skilled (2nd Class) and un-skilled workers to attend the work as and when needed

Carpenter /Plumber - II Class (Semi-skilled)

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

KM at Kodangal (Mdl)

KM at Bejjanki (Mdl)

KM at Wanaparthy (Mpl)

Man/Woman mazdoor (Un-skilled)

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

KM at Kodangal (Mdl)

KM at Bejjanki (Mdl)

KM at Wanaparthy (Mpl)

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental ,labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work. Ordinary soil-Manual means up to 3m depth

Note: Cost of dewatering may be added, where required, up to 5% of labour cost. Assessment for dewatering shall be made as per site condition

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

Cement Concrete (1:4:8)using 40 mm ( 0.54 Cum), 20mm (0.27 Cum) and 12 mm (0.09 Cum) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

Filling of foundations and basement with good gravel in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials , incidental charges etc., complete.

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

Construction of Brick Masonry in CM (1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

Plastering in Cement mortar for the following thickness using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete for the following proportions

-do- in C.M(1:5) 12 mm thick

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

-do- in C.M(1:5) 20 mm thick

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

Providing and fixing precast concrete blocks (interlocking pavers) using not lessthan M40 grade paver blocks and thickness not less than 80 mm for medium traffic areas conforming to IS 15658-2006 of all shapes and designs as per the specification, over sand bed of 20 mm to 40 mm (30 mm average) thickness and compacting with vibrating plate compactor having 3 tonne compaction force there by forcing part of sand underneath to come up in between joints. final compaction of paver surface to be done after spreading and brushing the fine sand into joints to its final level. The work includes cost of all materials such as interlocking pavers, sand etc., Labour and equipments such as cutting machine, lift, loading & unloading to work site clearing, bringing required all materials for the successful completion of work as per drawings and Technical Specification Clause 1504 MORD and as directed during execution by the Engineer-in- charge of the work.

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

Providing impervious coat to exposed RCC roof slab surface with CM (1:3), 20mm thick with 100 ml of Integral cement water proofing admixture complies with IS:2645-2003 of approved make per 50 Kg bag of cement laid over roof when it is green including cost of all materials, conveyance charges of materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item.

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

Flooring with Antiskid floor tiles Non-skid red or white full body Ceramic floor tiles of size 400 x 400 mm and thickness between 7-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including white cement slurry of honey like consistency spread @ 3.30 Kgs per Sqm. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint Gr-I over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

Finishing the sides of walls with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of approved colour and brands including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg /10 Sqm shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls). (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

Finishing the flooring with 15 to18 mm thick polished Shahabad stones (white) set over base coat of CM (1:6) 20 mm thick over already laid CC bed/RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 Kg per Sqm. & Jointed with neat cement to full depth including curing, cost & conveyance of all materials like cement, sand, water and flooring stones, labour charges for dressing of flooring stones etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the stones against supply)

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

Painting single coat for old walls with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 30 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

Painting single coat for old walls with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 30 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls.

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

Painting with Ready mixed Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 30 grams/liter approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

- do - Single coat for old Wood work

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

- do - Single coat for old iron work / Old plastered surface

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice

KM at Manopad (Mdl)

KM at Parigi (Mdl)

KM at Doma (Mdl)

KM at Dubbaka (Mpl)

KM at Mirdoddi (Mdl)

KM at Doulthabad (Mdl)

KM at Medchal (Mpl)

Conveyance of debris and waste material in the premises of Kalyanamandapam to a distance of 15 kilo meters including incidental charges, etc., complete.

Supply and fixing of pre-painted steel casement/ open able windows base steel as per IS 513 of 0.58 mm thick 'D quality, galvanized as per IS 277,finish painted with a polyester paint,section for outer frame of 46 x 52 mm section for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading 18 x 25 mm panelled with 5 mm thick plain float glass fitted with EPDM gaskets, handle made of high grade aluminium powder coated frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm squareguard bars @ 150 mm pitch for Windows: Double shutter with mullion section for sizes 3'-0 x 4'-0 (914.4mm x 1219.2 mm) and 4'-0 x 4 '-0 (1219.2x1219.2mm)

Supply of Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 30 mm thick conforming to IS:2202

Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame made out of 19 gauge M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side20 mm wide cross PVC sheet as gap insert fortop & bottom rail, panelling of 10mm(+/-)( 5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded /sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, complete as per direction of Engineer–in–charge, manufacturers specification

Supply of the following FIXTURES FOR DOORS & WINDOWS (Excluding taxes but including cost of loading, cost of conveyance, unloading & stacking)

Aluminium Aldrops (IS:2681) 300 mm long

Aluminium Tower Bolt-10 mm Bolt (IS:204) 300 mm Long

Aluminium Door Handles (IS:208) 150 mm Long

Deluxe window stay Aluminium

MS-Powder Coated - Door Stoppers

Supply & Fixing of 4 mm thick pin-headed glass including cost & conveyance, fixing glass panes of any thickness to the existing door / window panes including fixing the beading excluding cost of beading incidental charges, etc. complete.

Supply of machinery in desilting works guide lines for engaging Excavator- Loader (JCB) (Capacity / out put of machine 0.24/1 Cum) 1. The owner should transport the JCB to the work spot at his own costs. 2. The Excavator- Loader (JCB) should be able to excavate a minimum of 40 cubic meter of Earth per hour. 3. The Excavator- Loader (JCB) should be able to load 20 tractor as per hour with quantum of 2.83 cubic metre of loose factor per each tractor. 4. The rate of per hour is inclusive of all the costs like POL, Transportation of Machine, Driver Batta and other incident charges. 5. The payment of the Excavator- Loader (JCB) should be paid hourly basis subject to the condition 2&3 cited above. 6. The Excavator- Loader (JCB) should have the Tacho metre and it should function properly.

Supply and fixing of 1.5 to 2 mm thickness PVC sheet for toilet doors including screws, Nails and etc., complete as directed during execution.

Supply & Fixing Double coat hook with 10 years warranty

Rewinding of Burnt 3 H.P. Submersible motor of Given make and other minor HP Motor with suitable gauge insulated PVC copper wire varnishing, tapping, fitting etc., complete with over hauling and replacement of terminal plate/minor hardware items viz, soldering, testing of outgoing wires, bolts and nuts, painting with approved colour etc., and keep the motors in good condition. (Excluding GST)

Installation, testing and Commissioning of the submersible pump set with all accessories as per the standard specifications for above 60mts and up to 120 mts including laying of G.I. Pipe duly providing the G.I. Pipe of not more than 3 meters length in the Bore well including all incidental charges etc., complete as directed during execution.

Flushing of bore well of dia 165/150 mm with power rig at an average pressure of 150 PSI, including crew charges, completely done to the satisfaction of the department including detachable of all accessories and refix all materials as per the original condition including all labour charges, but excluding cost of materials & excluding taxes etc,, complete,- For 165/150 mm dia Bore wells

Supply and Transportation of control panel for single phase submersible motors up to 3 HP @ 220V 50Hz operating range between 80 to 240V including supply and fixing of Direct - on - Line LTLK / SIEMENS / CROMPTON make Volt meter and Ammeter with starting and running capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete.

Supply and Transportation of 1.5 HP 21 stage single phase ISI submersible motor pumpset suitable for 4" Bore well. Makes: Texmo / CRI / KSB / Aryan Varsha / Lubi

Writing the sign boards, Direction boards and painting Rangolies over M.S sheet with two coats of back ground one coat primary & one coat synthetic enamel paint over the sign boards with printing two coats with synthetic enamel paint over the back ground. The rate includes cost of paint, labour charges, scaffolding etc., required for the work. The paint should be done with first quality synthetic enamel paint of approved colour and make as directed during execution.

S&F premium make CPVC Pipes including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational, incidental, labour charges, etc.complete for finished item of work as directed by Engineer-in-charge.

- do - 34.90 mm dia OD pipe SDR 13.5

-do- 28.60 mm OD pipe - SDR 13.5

-do- 22.20 mm OD pipe - SDR 13.5

-do- 15.90 mm OD pipe - SDR 13.5

Supply of CPVC Pipes,fittings &Solvent

20 mm Elbow 90 degrees

20mm ball valve

Supply of 160mm dia 3 M Double Socket PVC/SWR PIPES 6Kg/cm2 (Materials shall be procured from the list of approved Brands/Manufacturers/ Suppliers) including cost and conveyance of all materials and incidental charges etc., complete as directed during execution.

Supply of 110mm dia 3 M Single Socket PVC/SWR PIPES 4Kg/cm2 (Materials shall be procured from the list of approved Brands/Manufacturers/ Suppliers) including cost and conveyance of all materials and incidental charges etc., complete as directed during execution.

Supply and fixing of 15mm Brass body CP finish Bib tap of not less than 300 gms weight screw type (full turn) with internal/external threaded connection conforming to IS:8931

S&F of 15 mm brass body CP finish pillar tap of not less than 300 grams weight screw type (full turn) conforming to IS 8931

S & F 15 mm nominal size brass concealed stop valve screw type with internal /external threaded conforming to IS 8931

Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock

Supplying & fixing approved make Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-2004 with "P"or "S" trap: 580 mm x 440 mm

Supplying and fixing approved make wash down European Water Closet of 1st quality conforming to IS:2556-Part-2-2004 of white glazed with 'P' trap

Supply & fixing of PVC low level system with internal components & short bend: 8 Litres capacity single Flush

S&F CP finish brass soap dish

S & F 25 mm nominal size dia& 609.6 mm long aluminium anodized towel rod with brackets and aluminium screws

Supply and fixing of TV shape mirror with plastic frame size 609.6mm X 457.2mm including cost and conveyance of all materials etc., complete.

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

Cleaning of septic tanks through sludge gulper (up to 4000 liters) including the conveyance of sludge gulper, operational charges etc., complete as directed during execution.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supply of Plastic Storage tank lid with hinges

Hire charges for supply, erection and removal of digital design flex boards with frame work made with of 25mm x 25mm MS square pipe (light weight)with required back support to erect boards at specified places as directed by the department. The cost inclusive of materials, labour for printing, erection and removal square pipe (light weight) after completion of the function.

Providing weld mesh with openings of size 75 x 25 mm (7GX11G) including cost and conveyance, incidental charges etc., complete as directed during execution.

Refilling of Fire extinguisher of ABC type by dismantling from site to workshop for refilling includes removing of existing powder and cleaning the cylinder, delivery pipe, nozzle internally and refilling new powder complete with reinstalling properly at site with necessary certificate including transportation and labour charges.

Refilling of Fire extinguisher of CO2 type by dismantling from site to work shop for refilling includes removing of existing powder and cleaning the cylinder, delivery pipe, nozzle internally and refilling new powder complete with reinstalling properly at site with necessary certificate including transportation and labour charges.