Pdg. CCTV system in Haryana MLA Hostel in Sec 3, Chandigarh.

Amount

SITC of 2 MP Box camera with 1/3‑inch CMOS, Active pixels 1920x1080; 2 MP at 25fps, Sensitivity – (3200K, reflectivity 89%, F1.4, 30IRE) Color 0.3 lux,Mono 0.03 lux ,With IR 0.0 lx, 85 dB Wide Dynamic Range (WDR) according to IEC 62676p5, H.265; H.264; M- JPEG, Multiple configurable streams in H.264 or H.265 and M-JPEG, White Balance, Day/Night, Automatic Electronic Shutter (AES); Dynamic Noise Reduction, Video Analytics line crossing, loitering, counter, occupancy counter, object removal should all be included in the camera, Privacy Masking Eight independent areas, fully programmable, Memory card slot, IR Range upto 60 metres , Automatic Varifocal 3 to 12 mm, ONVIF Profile S; ONVIF Profile G; IP67 & IK10. Housing, Mounting, Lens, IR Illuminator Should be of Same Make / OEM as of Camera Approved makes and models AXIS P1435-LE , Bosch NBE-4502- AL, Pelco IBE229-1R, SONY SNC-EB642R

SITC of 1080p Indoor Dome camera with 1/3‑inch CMOS, Effective pixels 1920x1080 ; 2MP 25FPS (approx.), Sensitivity – (3100K, reflectivity 89%, 1/25, F1.3, 30IRE)- Color 0.12 lx, Mono 0.03 lx With IR 0.0 lx, 75 dB Dynamic range as per IEC62676 Part 5, Stream 1 and Stream 2 Should be Configurable at 1080p 30 fps, Electronic Day/Night, Automatic Electronic Shutter (AES), H.265, MP (Main Profile); M-JPEG Video compression, White balance, Backlight Compensation, Privacy Mask,Video Analytics e.g line crossing, loitering, counter, occupancy counter, object removal should all be included in the camera, 3 to 9 mm Automatic Varifocal (AVF) lens, MicroSD card slot for edge recording, Motion, tamper and audio detection, FTP, IR Range upto 30mtr, Dropbox and e-mail applications, 3 axis adjustment, ONVIF Profile S, PoE, Housing vandal resistant IK04 rated , Mounting, Lens, IR Illuminator Should be of Same Approved makes and models AXIS Q3515- LV , Bosch NDI-4502-AL , Pelco MP221-1RS , SONY SNC-EM642R

SITC of 1080p HD IR PTZ Camera with 1/3" progressive scan CMOS, Effective pixels 1920 (H) x 1080 (V) 1080p @ 60 fps 30x Optical Zoom (4.5 mm–135 mm), 16X Digital Zoom, Minimum Illumination- Color: 0.05 Lux , B/W: 0.01 lux, IR: 0 lux; IR distance 180 m internal or external ; 85 dB WDR or better as per IEC, H.265, H.264, MJPEG streams, Dynamic Noise Reduction,video analytics line crossing, loitering, counter, occupancy counter, object removal should all be included in the camera, BLC, White Balance, Pan Range 360° continuous, Tilt Range 0°±90°, Pan/Tilt Modes - Pan: 0.1°/s - 240°/s; Tilt: 0.1°/s - 120°/s, Presets 256, Tours, Audio- 1/1 Channel In/Out, Micro SD card support, 24 individually configurable privacy masks, Alarm inputs/outputs - 2/1, Dual Power options, Essential Video Analytics in-built, IP66 , ONVIF Profiles S & G, FCC, CE, UL Certified. Housing, Mounting, Lens, IR Illuminator Should be of Same Approved makes and models: Axis VBR13VE+IR Illuminator, Bosch NDP-5502-Z30L+IR Illuminator , PelcoS6230+IR Illuminator, Sony SNC-WR632C+IR Illuminator

SITC of of network recorder With 24 TB HD to a maximum of 32 IP cameras,The recorders can be installed with a maximum of 4 internal HDDs for video storage. Option of a 2 HDDs for storage, plus a DVD burner for video export. Max. capacity per HDD: 6 TB. 1 no. E-SATA supported. The recorders comes with a built-in PoE+ switch as an option. 16 alarm i/p & 6 relay o/p. Simultaneous 1/4/9/16 channels playback. H.265/H.264/MJPEG supported. iPhone/Android support. Maximum incoming bandwidth of 320 Mbps. Maximum recording bandwidth of 320 Mbps. 1 I/O for audio. 1 VGA & 2 HDMI outputs. CE, UL & FCC certified.Approved makes and models: Axis S1048Mk II, Bosch DRN-5532, Pelco DSSRV2-240RD, Sony HAW-E

SITC of Layer -2 Switch with Power on Ethernet (PoE) enabled, with 8 nos. 10/100/1000 base Tx PoE port,2 no. dual personality Gbe Port for copper/fiber uplink, 2.7 Gbps switching capacity, 14.8Gbps forwarding rate, maximum power consumption 95 watt. (For All Floors) Make: Cisco /Juniper/Alcatel

SITC of Layer -2 Switch with Power on Ethernet (PoE) enabled, with 24 nos. 10/100/1000 base Tx PoE port, with 4 SFP 2 no. dual personality Gbe Port for copper/fiber uplink, 3.7 Gbps switching capacity, 46.8 GBPS forwarding rate, maximum power consumption 185 watt. (For All Floors)Make: Cisco/Alcatel/Juniper

SITC of Layer -3 Switch with Power on Ethernet (PoE) enabled, with 24 nos. 10/100/1000 base Tx PoE port, 4 SFP port with 2 combo no. dual personality Gbe Port for copper/fiber uplink, 54.6 Gbps switching capacity, 4.7 GPPS forwarding rate, maximum power consumption 185 watt. (For Control room)Make: Cisco/Alcatel/Juniper

SITC of 6U rack for 450 MM depth switch Mounting with Fan and 15 AmpX3 socket power Strip, PDU, Hardware Mounting Kit Make: Comrack/Valrack/Netrack

SITC of 22U Equipment Rack with provision for housing all control equipment with front & rear door, Blower for cooling and proper locking arrangements and as per the specifications, complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Makes: Comrack/Valrack/Netrack

SITC of 55" LED Monitor, Full HD, HDMI Port, Component Video Inputs, 1 Digital Audio Out, Make: Panasonic/Samsung/Sony

SITC of 3 Core Power Cable 1.5 sqmm. Make: Finolex/Polycab/Havells

SITC of CAT 6 UTP Cable. Make: R&M,Seimon,Systimax

SITC of PVC pipe25mm dia ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work Make: Diplast

SITC of OFC indoor soft jelly filled SINGLE MODE 6/12 CORE - OS2 . Should be ISO.IEC 11801 - 2nd Edition, type OS2 and ITU-T REC G 652D. Tube Idenification :Single tube/Multiple tube. Fibre protection (Tube) : Polybutylene Terephthalate (PBT). Water Blocking :Thixotropic Gel (Tube) and Petroleum Jelly (Interstices) with cotton poly thread protective. Core Wrapping : Polyethylene Terephthalate with cotton paper guard protection : Corrugated Steel Tape Armour (ECCS Tape). Strength Member: soft protetective periphery /Central S. Sheath : UV Stabilized Polyethylene (HDPE). Maximum. Tensile Strength-Short Term : 400N or better. Mass (Nominal) : minimum 50 kg/km Make R&M,Siemon,Systimax

SITC of SFP 1000 Base fiber module of same OEM as quoted in Active item.

SITC of CAT6 UTP 24 AWG Patch Cord - 1 mtr with cross separator , Manufactured from stranded wires for longer flex-life , Minimum length of 1m, and maximum length of 5m onforming to the following standards like EN 50173, ISO/IEC 60603-7 & 11801/IEC 60332-1, UL VW-1 Make R&M/Siemon/Systimax

SITC of 24-port 19" 1 U jack panel which Should Be made of sheet steel 1.5 mm, Should be 19" 1U straight Patch Panel, 24-port,Should have integral cable management Metal shelf,Should accept Shielded as well as Unshielded jacks, Should have rear cable management shelf metallic powder coated Make (R&M/Systimax/Seimon)

SITC of Lan convertor for OFC signal connectivity with 10/100/1000 mbps throghput rate. Make D-link/Microtik/Zyxel

SITC of single mode fiber adaptor should be from same OEM quoted for Passive brand Make R&M/Siemon/Systimax

SITC of OPTICAL FIBER EQUIPMENT CORDS (MINIMUM 3 METER) SC-LC /SC -SC. All optical fiber patch leads shall comprise of Single-mode 9/125µm fiber OS2 . Jacket should be LSZH . Connector: Zirconia ceramic ferrule. Cable: 9/125, MM OS2 Strength member: Aramid Yarn. Make R&M/Siemon/Systimax

SITC of OPTICAL FIBER PIGTAILS, 1.5 MTR SM OS2. Precision ferrule end face geometry SC Type SM. Factory polished, tested and serialized. Buffer Diameter: 900um tight buffer.Minimum bend radius: install: 30 mm .Retention Strength: 100N. Cable: 900um Buffered. Sheath :LSZH Make R&M/Siemon/Systimax

SITC of 24 Port fiber LIU which have sufficient slots to accommodate 48/24 Duplex LC/SC Ports ,Should have fiber management provision inside with splice tray and other accessories, Should be rack mountable 1U,Should have Splice holder for minimum 48 Fiber cores ,Should be made of Cold Rolled Steel ,Material Should steel: 1.5 mm, powder-coated Make R&M/Siemon/Systimax

SITC of 12 Port fiber LIU which have sufficient slots to accommodate 24/12 Duplex LC/SC Ports ,Should have fiber management provision inside with splice tray and other accessories, Should be rack mountable 1U,Should have Splice holder for minimum 24 Fiber cores ,Should be made of Cold Rolled Steel ,Material Should steel: 1.5 mm, powder-coated Make R&M/Siemon/Systimax

SITC of 6 Port fiber LIU which have sufficient slots to accommodate 12/6 Duplex LC/SC Ports ,Should have fiber management provision inside with splice tray and other accessories, Should be rack mountable 1U,Should have Splice holder for minimum 24 Fiber cores ,Should be made of Cold Rolled Steel ,Material Should steel: 1.5 mm, powder-coated Make R&M/Siemon/Systimax

SITC of 3 KVA UPS On Line With 1 hour Backup MAKE LIBERT EINOVA /APC

Hytek Turnkey Projects Pvt. Ltd.