SARDAR SAROVAR NARMADA NIGAM LIMITED

BILL OF QUANTITIES

(1) The bill of Quantities shall be read in conjunction with the Instructions to Bidder, Conditions

of Contract, Technical Specifications and Drawings.

(2) The quantities given in the Bill of Quantities are estimated and provisional, and are given to

provide a common basis for bidding. The basis of payment will be the actual quantities of work

ordered and carried out, as measured by the Contractor and verified by the Engineer and valued

at the rates and prices tendered in the priced Bill of Quantities, where applicable, and otherwise

at such rates and prices as the Engineer may fix within the terms of the Contract.

(3) The rates and prices tendered in the priced Bill of Quantities shall, except in so far as it is

otherwise provided under the Contract, include all constructional plant, layout, supervision,

materials, erection, maintenance, insurance, profit, taxes and duties, together with all general

risks, liabilities and obligations set out or implied in the Contract.

(4) The rates and prices shall be quoted entirely in Indian Currency.

(5) A rate or prices shall be entered against each item in the Bill Quantities, whether quantities are

stated or not. The cost of Items against which Contractor has failed to enter a rate or price shall

be deemed to be covered by other rates and prices entered in the Bill of Quantities (in case of

Item rate contract).

(6) The whole cost of complying with the provisions of the Contract shall be included in the items

provided in the priced Bill of Quantities, and where no Items are provided the cost shall be

deemed to be distributed among the rates and prices entered for the related items of Work.

(7) General direction and descriptions of work and materials are not necessarily repeated or

summarized in the Bill of Quantities. References to the relevant sections of the contract

documentation shall be made before entering rates or prices against each item in the Bill of

(8) The method of completed work of payment shall be in accordance with the specification for

Road and Bridge works. For building works specifications for building are to be followed.

(9) Errors will be corrected by the Employer for any arithmetic errors pursuant to Clause 29 of the

Instructions to Bidder.

(10) Rock is defined as all materials which, in the opinion of the Engineer, required blasting, or the

use of metal wedges and sledgehammers, or the use of compressed air drilling for its removal,

and which cannot be extracted by ripping with a tractor of at least 150 kw with a single rear

mounted heavy duty ripper.

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Description of Item Quantity Unit Rate in figure Amount

1 Providing and laying 150 mm deep

perforated HDPE Geocell system

with weld spacing as specified, in-

cluding geotextile and coir erosion

control blanket, anchoring with J- 5702.50 Sqm 1095.88

pins, crest and toe trenching, panel

joining and all necessary fixing ar-

rangements, complete as directed by

the Engineer-in-Charge.

2 Providing and fixing mild steel

dowel bars of minimum 32mm dia.

for anchoring by drilling holes in

foundation strata including neces-

sary bending, hooking of dowel bars

and grouting the holes complete as

per detailed drawing and as di-

Total amount in Rs.

Total amount in Rs.

I/We am/are willing to carry out the work at…………………. % above/below percent (Should be

written in figures and words) of the estimated rate mentioned above. Amount of my /our tender works

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

(B) For Item Rate Tender

Item Description of Item (with Quantity Unit Rate in figure Amount

No brief specification and

reference to book of In figures In Words

specifications)

Total amount in Rs.

Total amount in Rs.

1. The Contractor shall exhibit a board with detailed specifications and details of work as directed

by the Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R.

therefore in R.C.C. items where there is a change as per actual mix design the cost of difference

of cement consumption have been deducted from the rate of original item at the rate of input

rate mentioned in all the tender.