E-TENDER FOR REFURBISHING OF THE CLOVER GARDEN FLAT PUNE

Electrical Items :

WOOD AND PVC WORK Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) Second class teak wood

Providing and fixing panelled or panelled and glazed shutters for doors ,windows and clerestory windows, fixing with butt hinges of required size with necessary Screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood. 35 mm thick shutters

Providing and fixing Panelling or panelling and glazing in panelled or panelled and glazed shutters for doors,windows and clerestory windows [Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second class teak wood. 35 mm thick shutters.

Providing and fixing ISI marked flush door shutters conforming to IS 2202 (Part I) decorative type. core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screwNS3

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Providing and fixing chromium plated brass Curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete. 25 mm dia

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.

Providing 40x5 mm flat iron hold fast 40 cm. long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement: 3 coarse sand:6 graded stone aggregate 20mm nominal size).

Providing and fixing Magnetic catcher of approved quality in cupboard/ ward robe shutters, including fixing with necessary SCrews etc. Complete. Double strip (horizontal type)

Existing door frames 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with Suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856, complete as perdirection of Engineer-in-charge.

Providing & fixing Decorative high pressure laminated sheet of plain/wood grain in gloss/ matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick

Providing and fixing Fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows Using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. O.50 mm all Complete.

With 12 mm mild steel U beading

Providing and fixing factory made UPVC white colour sliding glazed upto 1.50 m in helight dimension comprising of uPVC multi-chambered frame with in-builtroller track and sash extruded profiles duty reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming procss of requlred length (shape & size according to uPVC protle) approprate dimension of uPVC extutruded glazing beads and uPVC extruded interlocks EPDM gasket woal pile zinc alloy (white powder coated) touch louch locks with hook zinc alioy body with single nylon rollers (weight bearing capaclty to be 40kg) G.I fasteners 100 x 8mm size for fixing frame to finished wall and necessary slainless steel screws etc. Profile of frame & sash shal be mitred cut and fusion welded at all corners. including drilling of holes for fixing hardwares and droinage of water etc.After fixing trame the gap between trame and adjacent linished wail shall be filed with weather prool sicon seaenl over backer rod of requred size and of approved qualty all complete as per approved drawing & direction of Engineer-in-Charge.Single/double alass panes wire mesh and

Three track three panels sliding window with fly proof S.S wire mesh (Two nas glazed & one no. wire mesh panels) made of (big series) frame 16x45mm & sash 46x62mm both having wall thickness of 2.3+0.2mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.75sqm). Providing and fixing bright/malt finished Stainless steel handles of approved quality & make with necessary screws etc all complete. 100mm

Providing and fixing Cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc.with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and tixing auto closing hinges shall be paid separately)

Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves.racks,almirah,cupboard and drawer etc. including necessary nails.screws etc. complete as per direction of Engineer-in-charge.

Providing and fixing stainless steel fancy handle of approved make fixed with SS sCrews etc. complete as per direction of direction of Engineers-in-charge. 200 mm. Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved

make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per board and finished etc. complete as per

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc.complete as per directions of Engineer- incharge.

Ready made 304 grade Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Sauce, plant. Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket. Dinner set basket, kitchen grain basket,Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-incharge. {For Payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately}

Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting. hoisting, fixing in position and applyinga priming coat of approved steel primer all complete

Flooring work. Welding & Steel Work. Providing and laying Ceramic glazed floor tiles of size 300x30O mm (thickness to be specified by ihe manutacturer) of 1st Quality Conforming to ls: 15622 of approved make in colours SUch as White. Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement morfar 1:4 (1 Cement 4 Coarse sand), Jointing with grey cement slurry 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc complete.

Flooring work. Welding & Steel Work. Providing and laying Ceramic glazed floor tiles of size 300x30O mm (thickness to be specified by ihe manutacturer) of 1st Quality Conforming to ls: 15622 of approved make in colours SUch as White. Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement morfar 1:4 (1 Cement 4 Coarse sand), Jointing with grey cement slurry 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc complete. Double charge vitrified tile polished finish of size Size of Tile 800mm X 800 mm.

Glased vitrified tiles Matt/ Antiskid finish of size Size of Tile 600mm X 600mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to 1.S. 15622, of approved make, in all colours &shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand). jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm

CLADDING WORK Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchenh platforms, vanity counters, window sills, facias and similar locations of required size approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement :4 Coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, Curing. moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black,Cherry/Ruby red. Area of slab upto 0.50 sqm.

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform , vanity counter and similar location in marble/ Granite/ stone work,including necessary holes for pillar taps etc.including moulding, rubbing and polishing of Cut edges etc. complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours. shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting. risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

MASONRY WORK. Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in: Cement mortar 1:6 |1 cement:6 Coarse sand)

Half brick masonry with non modular fly ash bricks of class designation 10. conformingio IS:12894, in super structure above plinth and upto floor V level. Cement mortar 1:4 (l cement: 4 coarse sand)

CEMENT CONCRETE WORK. Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves,chaijas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand|zone-ll) derived from natural sources:3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting.propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reiníorcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

CONCRETE WORK Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc.. up to floor five level, excluding the cOst of centering, shuttering and finishing: (1 cement 3 coarse sand (zone-11) derived from natural sources:6 graded stone aggregate 20 mm nominal size derived from natural sources)

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.

REPAIRS TO BUILDING Repairs fo plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters nd under, including cutting the patch in proper shape, raking out joints and reparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all omplete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement:4 fine sand

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work Exposed on wal

DEMOLISHING AND DISMANTLING Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing brick work manually/ byY mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave.holdfasts etc. complete and stacking within 50 metres lead: Of area 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling of flushing cistern of all types (C.I/PVCNitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

WATER SUPPLY. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermnal stability for hot & cold including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge internal work - Exposed on wall

25 mm nominal dia Pipes and 32 mm nominal dia Pipes

Providing and fixing Chlorinated Polyviny Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes and 25 mm nonminal outeer dia pipes

Providing and fixing gun metal non-metal value of approved quality(screwed end):25 mm nominal bore Vertical

32 mm nominal bore Vertical

Providing and fixing uplasticised PVC connection pipe with brass unions: 45 Cm length and 15 mm nominal bore

Providing and fixing C.P. brass bib cock of approved qualify conforming to IS:8931 and 15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 and 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 and 15 mm nominal bore

WATER PROOFING Providing and laying water proofing treatment in sunken portion of WCs,bathroom etc.. by applying cement slurry mixed with water proofing cement compound consisting of applying a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement 0.242 kg/sqm mixed with water proofing cement compound @0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water Curing for 48 hours.

ALUMINIUM WORK Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. Complete as per ihe architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 5 mm thickness weight not less than 12.50 kg/sqm)

NON SCHEDULE ITEMS Providing and fixing 35 mm thick machine Cut machine polished kadappa stone slab Cut machine polished kadappa stone slab chases on wall upto 40mm depth and finishing the wall after fixing with cement mortar 1:3 (1 cement:3 coarse sand) etc. complete as directed by Engineer-in-Charge.

Providing and fixing on wall face unplasticised Rigid PVC SWR pipes conforming to IS: 13592 Type B. including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 40 mm diameter

Providing and fixing unplasticised-PVC moulded Nahani trap with inlet for unplasticised Rigid PVC SWR pipes Conforming to IS: 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. complete including cost of cutting and making good the wall and floors all Complete" 100 mm

Providing and fixing CON-041KN 2-Way Bib Cock of Jaquar make or equivalent as approved by Engineer-in-charge

Providing and fixing ALD-577 Hand Shower (Health Faucet) with 8mm Dia, 1.20 Meter long flexible tube & wall hook with NRV (blackflow preventer) of Jaquar make or equivalent as approved by Engineer-in-charge

Providing and fixing 0mm longlight body wall mounted1 und shape shower arm SHA-477 with Wall Flange and over head shower 100mm dia round shape single flow (ABS body chrome plate with gray face plate) with rubif cleaning system OHS-1989 of Jagaur or equivdlent make as per the direction of Engineer-in-charge.

Providing and fixing window louvers including factory made PVC adjustable louver guides of standard pattern and 100mm wide 4mm thick glass panes glass etc. complete as per the direction of Engineer-in-charge.

Providing and fixing stainless steel sliding door bolts, ISI marked, with nuts and screws etc. complete: 250x16 mm

Providing and fixing stainless steel tower bolts, ISI marked, with nuts and screws etc. complete: 250x10 mm

Providing and fixing stainless steel handles, ISI marked ,with necessary screws etc.complete 100 mm

Providing and fixing stainless steel handles, ISI marked ,with necessary screws etc.complete 75 mm

Providing and fixing stainless steel hanging floor door stopper, with necessary screws etc. Complete Twin rubber stopper Credit for taking away dismantled serviceable and unserviceable materials items including disposing the materials out of the GST Bhavan Campus in all leads and lifts, cleaning the site neatly complete as directed by the Engineer-in-charge

SANITARY INSTALLATIONS Providing and fixing water closet squattig Quantity Rate Amount DSR 2021an (Indian type W.C. pan ) with 100 mm and cast iron P or S tap, 10 litre low level white P.V.C . flushing cisten, including tlush DID with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and tixtures complete, including cutting and making good the walls anda floors wherever required: White Vitreous china Orissa pattern w.c. pan of size 58Ox440 mm with integral type foot rest

Providing and fixing wash basin with C.I. brackets 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fitfings and brackets,cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pilar tap

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I.orackets and stainless steel plug 40 mm, inciuding painting of fittings and brackets.Cutting and making good the walls wherever required: Kichen sink with drain board 510x1040 mm bowl depth 250 mm

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and Os per the direction of Engineer-in-charge.

Providing and fixing P.V.C Brass Single lever Eephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nomninal dia. Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete Flexible Pipe 40 mm die

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers Complete.

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting,of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres) including seat cover, and cistern fittings nuts. bolts and gasket etc complete.

FINISHING 20 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand)

12 mm cement plaster of mix: 1:6 (1 cement: 6 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand)

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work

Providing and Applying white cement based putty of average thickness I mm, of approved brand and manufacturer, over the plastered wall surface to prepare the Surface even and smooth complete.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs too scratches etc. complete

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work Polishing in high gloss/matt finish melamine clear polish on wood work in required calor/wooden shade texture

Process in the sequence as detailed below: 1. The surtace to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coat of sealer with spray gun and allowing sufticient drying time for Ist coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the Surface further smooth after this wet rubbing. then Surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine.

1.55 MM BLACK WIRE, 1.5 MM RED WIRE, 1.5 MM BLACK WIRE FOR NEGATIVE AND EARTHING WIRING, 2.5 MM RED WIRE FOR POSITIVE WIRING, 2.5 MM RED FOR POSITIVE WIRING FOR AC, REFRIGERATOR, OVEN WASHING MACHINE ETC, 2.5 MM BLACK WIRE FOR NEGATIVE AND EARTHING WIRING FOR AC, REFRIGERATOR, OVEN, WASHING MACHINE ETC.

MCB Board

Switch Boards & Metal box Switches, Sockets & Fan regulator LED Lights, Blubs, LED strips exhaust fan etc.

15A switch & Sockets Pipes for concealing wire 4 way junction, Along with Bend of pipe.