Upgradation / augmentation of Satellite TrackMachine Depot, Marwar/Ajmer Division including other staff amenities.

A-CPWD DSR ITEMS 2023

B-IRUSSOR ITEMS 2021

D-NS ITEMS FOR ELECTRICAL WORK

Item Breakup - A-CPWD DSR ITEMS 2023

Item Breakup - B-IRUSSOR ITEMS 2021

Using Soil Class SQ3 Earthwork in cutting in formation, trolley refuges, side drains, level crossing approaches, platforms, catch water drains, diversion of nallah & finishing to required dimension and slopes to obtain a neat appearance to standard profile inclusive of all labour, materials, plant & machinery, leading all cut spoils either to make spoil dumps or for filling in embankment with leads within 2 km on either side of edge of the cutting(s) including all lifts, ascent, descent, loading, unloading, bailing & pumping out water, if required, clearance of site and all other works incidental thereto for completing the work as per RDSO Specification No. RDSO/2020/GE: IRS-0004 with latest updated correction slips and to the satisfaction of the Engineer-in-Charge. Note: (i) All usable earth arising from cut spoils shall be led into bank formation and Unusable spoils shall be dumped / stacked away from toe of embankment. (ii) All hard rock /and boulders not fit for filling will be stacked by the contractor and will be property of the Railways. (iii)Cut trees shall be property of Railways and to be deposited in the railway godown unless specified otherwise in the Conditions of Contract.

In all conditions and classifications of soil cum except rock AJMER DIVISION-ENGINEERING/NORTH WESTERN RLY

Soft rock not requiring blasting

Manufacturing of blanketing material by cum wet mixing of naturally available suitable soil including additional blending with naturally available or manufactured material as required to achieve specified gradation, in designed proportion in Pug mill or wet mix plant to have uniform gradation including all incidental transportation, laying over finished formation in uniform layer(s) with motor grader, compaction with suitable vibratory roller to specified density and finishing to correct profile, complete as per RDSO Specification No. RDSO/2020/GE: IRS-0004 with latest correction slips. Earthwork in excavation by mechanical means (Hydraulic Excavator)/Manual Means for foundations and floors of the bridges, retaining walls etc. including setting out, dressing of sides, ramming of bottom, getting out the excavated material, back filling in layers with approved material and consolidation of the layers by ramming and watering etc. including all lift, disposal of surplus soil up to a lead of 300m, all types of shoring and strutting with all labour and material complete as per drawing and technical specification as directed by Engineer in charge. Note: This item will be used for excavation work in connection with other miscellaneous works also like side drains, foundation for OHE masts and other miscellaneous structures in connection with Gauge Conversion, Doubling, New lines.

All kinds of soils Providing and laying in position Plain cement concrete of specified Nominal Mix f o r miscellaneous works like side drains, foundation for OHE masts and other miscellaneous structures excluding the cost of Cement, centering and shuttering - All work up to plinth level :

1:1½:3 (1 Cement: 1½ coarse sand (zone- cum III) : 3 graded stone aggregate 20 mm nominal size) Supply and using Cement at Worksite

Ordinary Portland Cement approved brands/makes

Dismantling the existing BG Buffer-stop laid Set with rails & wooden/ST sleepers including leading the dismantled Buffer stop materials to nominated places within station yard limits and stacking as material- wise and classification-wise duly releasing all fittings carefully without causing any damage with all contractor's labour, tools, with all lead and lifts, crossing of tracks if any, etc., complete as directed by the Engineer-in-charge. AJMER DIVISION-ENGINEERING/NORTH WESTERN RLY Manufacturing, supply and stacking of machine crushed Track Ballast conforming to RDSO Specification (IRS-GE-1) with latest correction slips at Railway depot or nominated location. Note: Distance of nearest quarry mentioned in each sub-item is only for the purpose of selecting the items for preparation of estimates/tender schedule, based on the minimum distance betw e e n nearest quarry and centre of supply points and will not affect the selection of quarry during physical supply in any way till prescribed specification is met fully.

When distance of nearest quarry is up to 10 cum km

Spreading of ballast, from existing stacks cum available along formation on top or at cess, in required uniform thickness, compaction of ballast layer laid on new formation at all the locations with smooth wheeled power roller of 8-10 tonne capacity to sufficient number of passes to form consolidated ballast bed of approximately 250mm thickness to a width of 4m symmetrical to centre line of proposed track in correct line & level with all ascents & descents, as directed by Engineer in-charge. Note: Item is inclusive of (a) providing ramp for taking roller to formation and removing the same & making good formation after completion of work; (b) redistribution & leveling of excess ballast while rolling to obtain uniform plane cambered surface. Linking of BG track (except at LC, Bridges and SEJs) with any type of rail section and sleeper of specified density, on ballast bed spread and compacted with suitable roller, over prepared formation including leading free rails/welded panels available along the alignment on to formation, leading and spreading all fittings and fastenings, spreading of sleepers at specified spacing, squaring, placing of rails over sleepers and fixing rails to sleepers with all types of fittings and fastenings to correct gauge & alignment, lubrication of fittings and fastenings with contractor's grease as per IRPWM standards with contractors labour, tools, consumables, with all lead, lifts etc. complete and raising, levelling and initial packing of track to make it fit for 30 kmph and meet other prerequisites prescribed in Indian Railway Track Machine Manual for deployment of Tamping Machine. Note: 1.Rail cutting and Hole drilling shall be paid separately. 2.Spreading of ballast and compaction shall be paid separately under relevant item.

For sleeper density of 1660 sleepers per km TRM First or Second Through Packing of track of all sleeper density including giving a general lift, as desired to eliminate sag after Deep Screening work, lifting of track, lowering of track and major realignment of curves and formation rehabilitation as per procedure prescribed in latest edition of IRPWM. Note: General lift is normally 25 mm and isolated lift may be up to 50 mm. AJMER DIVISION-ENGINEERING/NORTH WESTERN RLY

For PSC Sleeper Track with Sleeper Density TRM of 1660 Anti-corrosive painting of rail outside track on rail bottom, web, foot and fishing plane with two coats of thickness of 100 microns each by bituminous black paint confirms to IS-9862 of reputed make including surface preparation, as a complete job as per procedure prescribed in latest edition of IRPWM.

For 60 Kg Rails Quick cutting with abrasive rail cutter of all types of rail sections including wear resistant, head hardened rails up to 110 UTS, with contractors tools & plants, equipment, consumable with all lead & lift etc. complete as directed by Engineer in- charge. Abrasive Rail Cutter will be as per RDSO Specification No. TM/SM/1 (Rev. 01 of 2012) with latest status of RDSO; Rail Cutting Wheel Abrasive Disc will be as per RDSO Specification No.TM/SM/2 (Rev. 01 of 2020)

60 Kg - 110/90 UTS - Outside Track

60 Kg - 110/90 UTS - On Running Line Drilling holes of 16 mm to 32 mm dia. with Rail Drilling machine including chamfering with appropriate chamfering tools in all types of rail section with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in-charge. Rail Drilling Machine will be as per RDSO Specification No. TM/SM/3, dated 24.04.1991.

On Running Line Loading of rails of any section and length up to 13 metres in Wagons / Truck / trailer including lead up to 50 metres and lift up to 5 metres.

I n Wagon where mechanical handling is MT possible and traffic block is not required or in Truck/trailer. Unloading of rails of any section and length up to 13 metre, in neat manner for Railway usage from departmental material train (DMT) or contractor's / Railway's Truck/trailer including lead up to 50 metre, lift up to 5 metre and stacking in prescribed manner.

From Wagon where mechanical handling is MT possible and traffic block is not required or in Truck / trailer. Loading of 52kg / 60kg PSC normal line and special sleepers up to 2.75 metre length in Depot / Station / Mid-section between stations in a neat manner to departmental material train (DMT) or contractor's / Railway's Truck/Trailer with crane or any other means including crossing of one track with free lead up to 250 metre and lift up to 5 metre, if required with contractor's labour, tools & plants, machinery, consumables etc. Note: In case of any damage to sleeper during loading, penalty @ 50% of the all inclusive cost of sleeper shall be levied. AJMER DIVISION-ENGINEERING/NORTH WESTERN RLY

I n Wagon where mechanical handling is MT possible and traffic block is not required or in Truck / trailer Loading, leading and unloading of all types of P.Way fittings and all other miscellaneous material except Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different leads. Note: Lead shall be the shortest motorable road length between the points of loading and unloading.

Lead beyond 100 Km and up to 150 Km

Extra for every Km per MT beyond 150 Km MT-Km over item no. 172047 Transportation of Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different leads. Note: 1 . Lead shall be the shortest motorable road length between the points of loading and unloading. 2. Loading and unloading shall be paid extra under relevant items.

Lead beyond 100 Km and up to 150 Km

Extra for every Km per MT beyond 150 Km MT-Km over item no. 172057 Unloading of 52kg / 60kg PSC line and special sleepers up to 2.75 metre length in Depot / Station / Mid-section between stations in neat manner for Railway usage from departmental material train (DMT) or contractor's / Railway's Truck/Trailer with crane or any other means including crossing of one track and lead up to 250 metre & lift up to 5 metre with contractor's labour, tools & plants, machinery, consumables etc. Note: In case of any damage to sleeper during loading, penalty @ 50% of the all inclusive cost of sleeper shall be levied.

From Truck / Trailer

Supply and fixing in position pre-cast Each cement concrete Fouling Mark as per approved drawing at station yard, duly painting the top surface and slopes with white enamel paint in two coats and inscribed letters with black of Fouling Mark, complete in all respects with all labour, materials including cement, tools and plants etc. Hiring of machinery for minor miscellaneous works for short duration including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site.

JCB Backhoe Loaders 3DX Plus or similar Hour with minimum 1.10 cum bucket capacity

Manufacturing and fixing buffer stop with Each Railway supplied rails, cutting, including bending of rails as per plan ,with all contractor's labour, materials, tools, plants etc. and all lead and lift including crossing of track where necessary and as directed by Engineer in charge at site. Note: Excavation, fixing rails in cement concrete, drilling of holes will be paid separately. Total 1059806.65 AJMER DIVISION-ENGINEERING/NORTH WESTERN RLY

Item Breakup - D-NS ITEMS FOR ELECTRICAL WORK

Supply, install, test & commission of Numbers outdoor type junction box with IP-54 protection, double door, wall mounted fabricated from 16 SWG CRCA sheet, duly powder coated with Aluminium bus bar of 30 X 10 mm and outgoing having 125A, 4 P 'C' curve MCCB's (01 no.) with suitable rating connectors. As per specification

Supply, install, test & commission of LT Numbers control VTPN-DD-SDB with incoming MCCB 1X125Amps and outgoing MCB (TP) 4X63Amps. As per specification

Supply, install, test & commissioning of 4 Numbers way TPN-DB (8+12) double door. As per specification

Supply, install, test and commission of Numbers 63Amp 4P-"C" series MCB 50Hz incoming in TPN DB. As per specification

Supply, install, test and commission of Numbers 63Amp 4P-RCCB 100mA, 50Hz in TPN DB. As per specification

Supply, install, test and commission of 6- Numbers 32A SP-MCB "B" series as out going in DB. As per specification

Supply, erection, testing and commissioning Numbers of pre-cooling points having 440V 63A plug switch unit combined set (male-female both) including aluminium four pole bus bar chamber of 100Amps capacity complete inside MS enclosure having suitable design for incoming and outgoing XLPE cable with earthing of the pre-cooling point as per the detailed technical specification and site requirement. This item includes the supply of 63Amps MCCB 4 pole suitable size of MS box as per site requirement and drawing. As per specification Total 249162.00 Item- 2 Earth Station S No. Item No Description of Item Unit Qty Rate Amount

Provision of specification Total 27540.00 Item- 3 Cable laying with associate accessories S No. Item No Description of Item Unit Qty Rate Amount

Drilling of horizontal bore below track/road RM by pushing method for laying of RCC/HDPE/ DWC pipe of size up to 100mm. As per specification

Digging and filling of trench size 0.4 x 0.8 Metre meter (trench work may be on kuchha/pucca land and all type of soil as per site requirement and without protective layer of brick) surface on trench shall be made good in all respect and satisfaction of site engineer. As per specification AJMER DIVISION-ENGINEERING/NORTH WESTERN RLY

Supply and laying of following size Cablefit Metre (Double wall corrugated) category 750N Pipe ISI marked for HT/LT cable along with all the accessories like Ring coupler, bend, socket etc. conforming to IS 16205 PART 24, Part II or latest complete with fitting and cutting, jointing etc. for in the existing trench, complete as required. 63Mm dia (OD- 63mm & ID- 51mm). As per specification (Inspection clause: by Railway representative at factory / manufacturing unit)

Cable laying in air/wall/pole with 02 fixture Metre per meter. As per specification

Cable laying in air/wall/pole without fixture. Metre As per specification Total 451100.00 Item- 4 Wiring S No. Item No Description of Item Unit Qty Rate Amount

Supply, install & commission of PVC conduit Metre pipe 20mm dia medium duty with accessories. As per specification

Supply of material & wiring of Point by Numbers 1.5sqmm & earth wire by 1.5sqmm PVC insulated, single core, multi-strand FR grade wire as per specification. As per complete specification

Supply of material & wiring of sub main by Metre 2.5sqmm & earth wire by 1.5sqmm PVC insulated, single core, multi-strand FR grade wire without PVC pipe. As per specification

Supply of material & wiring of sub main by Metre 4.0sqmm & earth wire by 2.5sqmm PVC insulated, single core, multi-strand FR grade wire without PVC pipe. As per specification

Supply of material & wiring of sub main by Metre 6.0sqmm & earth wire by 4.0sqmm PVC insulated, single core, multi-strand FR grade wire without PVC pipe. As per specification

Supply, install, test & commissioning of 12 Numbers Module PVC box with inner & outer plate used for wiring work. As per specification

Supply, install, test & commissioning of 08 Numbers Module PVC box with inner & outer plate used for wiring work. As per specification

Supply, install, test & commissioning of 03 Numbers Module PVC box with inner & outer plate used for wiring work. As per specification

Supply of material & fixing of 6Amps 5-pin Numbers socket (2-module) used for concealed modular wiring. As per specification

Supply & fixing of blank plates (1-module) Numbers used for concealed modular wiring. As per specification

Supply of material & fixing of 6/16Amp, 6- Numbers pin combined shuttered Socket (2-module) used for concealed modular wiring. As per specification

Supply of material & fixing of S.P. switch Numbers 16Amps one way (1-Module) used for concealed modular wiring. As per specification

Supply of material & fixing of S.P. Switch Numbers 10Amps one way (1-module) used for concealed modular wiring. As per specification AJMER DIVISION-ENGINEERING/NORTH WESTERN RLY Total 100908.00 Item- 5 Outdoor Lighting S No. Item No Description of Item Unit Qty Rate Amount

Supply & erection of 5 meter high double Numbers arm, hot dip galvanized steel octagonal pole with galvanized base plate, galvanized box with 6Amp MCB & stud terminals, foundation bolt with excavation and making foundation. As per specification

Supply, fabricate & fixing of complete Numbers Street light control box with MCB, Toggle switch, contactor & timer. As per specification Total 66107.00