Tender for, Restoration and Re-routing of damaged 33 KV Prini Palchan Dhundhi feeder damaged due Flash Flood during 2023 under ESD No-II, HPSEBL, Manali on Turnkey Basis.

H T Line (Supply Part):-

Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any.

G .I Wire 6 SWG for earth wire

M S Channel iron 4200x125x65x5.3mm for Top x-arm

M S Channel iron 4500x100x50x5 mm for gaurding & contineous earthwire

Belt set MS Angle Iron (1800X65X65x6) mm each (2 No. Per Set)

A.I. Bracing Set for Double Pole structure (2700X50X50) mm. each (2 No. Per Set)

33 K.V H.T Stay Set complete

Stay wire 7/4mm (@ 10kg per stay set)

Danger Plate

HT Earthing Set complete

Barbed wire @ 4Kg per pole

Full Clamp

Half Clamp

Aluminium Paint @ 2.0 ltr per pole with X-arm

Red oxide

MS Nut& Bolts off size @ 4Kg per str.

Erection Part (33kV HT Line)

Erection of steel tubular pole 11.00 Mtr. Long (Tripple pole) digging of pit, Drilling of holes in X-Bracing set X-arm, Erection of pole with RCC Muff,including cement concrete filling 1:3:6 (1 cement : 3 sand : 6 aggrigate 20 mm nominal size), Fixing of insulator X-arm X-bracing set, Fixsing of all types of Clamps, Fixing of barbed wire danger plate , Filling of pit+ramming & painting of pole (Punching of the poles is stricitly not allowed)

Erection of steel tubular pole 11.00 Mtr. Long (Double pole) digging of pit, Drilling of holes in X-Bracing set X-arm, Erection of pole with RCC Muff,including cement concrete filling 1:3:6 (1 cement : 3 sand : 6 aggrigate 20 mm nominal size), Fixing of insulator X-arm X-bracing set, Fixsing of all types of Clamps, Fixing of barbed wire danger plate , Filling of pit+ramming & painting of pole (Punching of the poles is stricitly not allowed)

Erection of steel tubular pole 11.00 Mtr. Long (Single pole) digging of pit, Drilling of holes in X-Bracing set X-arm, Erection of pole with RCC Muff,including cement concrete filling 1:3:6 (1 cement : 3 sand : 6 aggrigate 20 mm nominal size), Fixing of insulator X-arm X-bracing set, Fixsing of all types of Clamps, Fixing of barbed wire danger plate , Filling of pit+ramming & painting of pole (Punching of the poles is stricitly not allowed)

Laying, stringing , sagging & binding with Insulator of ACSR rabbit conductor of size 6/1/4.72 mm (100mm2) for HT Line.

Laying, stringing , sagging & binding with Insulator of GI wire

Erection of Stay Set HT (Digging of pit, fixing of stay rod, filling of pit , nozzeling & tighting)

Jumpering

Dismantlement of existing poles (Single pole)

Dismantlement of existing poles (Double pole)

Dismantlement of existing ACSR conductor 6/1/4.72mm

Erection of Earthing set for HT Line (Digging of pit, fixing of GI wire to the earth system & filling of pit)

Transpotation