Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 LAdmitted-Fee/PreQual/Technical/Finance NA | NA | NA | 121004 | ₹1.4 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹1.4 L+₹2,927.15 (2.15%)Admitted-Fee/PreQual/Technical/Finance | ₹1.4 L+₹2,927.15 (2.15%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | Jithin K M L2 | NAVAS M K L1 |
|---|---|---|---|---|---|
| 1.00Building Maintenance | |||||
| 1.00 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 0.46 | cum | 8,409.03 ₹3,826.11 | 8,232.44 ₹3,745.76 Lowest |
| 1.00 | 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | 0.58 | cum | 7,052.66 ₹4,125.81 | 6,904.55 ₹4,039.16 Lowest |
| 1.00 | 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 2 | cum | 7,988.03 ₹15,976.06 | 7,820.28 ₹15,640.56 Lowest |
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 27 | sqm | 391.96 ₹10,584.88 | 383.72 ₹10,362.36 Lowest |
| 1.00 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | 27 | sqm | 85.7 ₹2,314.33 | 83.9 ₹2,265.72 Lowest |
| 1.01 | 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 27 | sqm | 221.82 ₹5,990.25 | 217.16 ₹5,864.41 Lowest |
| 1.01 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 123.25 | kg | 619.81 ₹76,388.48 | 606.79 ₹74,783.83 Lowest |
| 1.01 | OD20062/2026-2027:Providing and fixing Hylum sheet in panelling fixed in aluminium doors windows shutters and partion frames with up brass /stainless steel screws etc.complete as per architectural drawings and directions of Engineer in charge . | 17.29 | sqm | 1,019.98 ₹17,630.35 | 998.56 ₹17,260.11 Lowest |
| 1.01 | 9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | 6.6 | kg | 262.77 ₹1,734.28 | 257.25 ₹1,697.85 Lowest |
Tender Value
₹1.4 L
EMD Value
₹3,484
Closing Date
11 Sept 2026, 11:00 amClosed
ASSISTANT ENGINEER
LID AND EW SUBDIVISION VYPIN BP
ProNo 31 VBP Construction of Biomedical waste room and Haritha Karma Sena Waste room at Njarakal taluk hospital-
2026_LSGD_867060_1
LSGD/CELSGD/TR/30979/2026
Open Tender
Civil Works - Buildings
Item Rate
180 days
NJARAKKAL
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
₹3,484
Yes
14 Sept 2026
2 Sept 2026
14 Sept 2026
2 Sept 2026
11 Sept 2026
2 Sept 2026
2 Sept 2026 - 11 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Building Maintenance | |||||
| 1.001 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.002 | 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | - | cum | - | - |
| 1.003 | 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | - | cum | - | - |
| 1.004 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 1 | sqm | - | - |
| 1.005 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | 1 | sqm | - | - |
| 1.006 | 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 1 | sqm | - | - |
| 1.007 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | - | kg | - | - |
| 1.008 | OD20062/2026-2027:Providing and fixing Hylum sheet in panelling fixed in aluminium doors windows shutters and partion frames with up brass /stainless steel screws etc.complete as per architectural drawings and directions of Engineer in charge . | - | sqm | - | - |
| 1.009 | 9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | 1 | kg | - | - |
stage.html
html • 0.02 MB
finance_1468071.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
PRELIMINARYAGREEMENT.pdf
Tender Documents • 0.55 MB
epaymentform.pdf
Tender Documents • 0.04 MB
IPACT.pdf
Tender Documents • 0.03 MB
aff.pdf
Tender Documents • 0.02 MB
FORMOFTENDER.pdf
Tender Documents • 0.37 MB
BOQ_1468071.xls
BOQ • 0.24 MB
SBDBIO.pdf
Tender Documents • 1.94 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .