WBIW/EE-II/JOY/NIT- 5(e)/2025-26_SL34

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specifications Clause 202 for Rural Roads of MORD. (a) Cement mortar

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips ( 20mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur variety

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (i) 25 mm to 30 mm shuttering without staging in foundation

First class Brick work in cement sand mortar in steining of well, pier, abutment, wing wall, parapets cross drain. H.P. culverts, guard wall etc. including curing, scaffolding, raking out joints etc. complete including cost and carriage of all materials. (a) In 1:4 proportion. Note- Construction wings is to add cost and carriage of bricks as per consumption chart vide section 3 of Vol. I for Building works only to arrive at consolidated rate.

Supplying, fitting and placing HYSD bar reinforcement in Sub- structure including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, bending with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and direction of Engineer-in-Charge.

Plaster ( to wall, floor, ceiling etc) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noising and drip course, scaffolding/ staging where necessary ( Ground floor).(Excluding cost of chipping over concrete surface) (i) With 1:4 cement mortar. (a) 15 mm thick plaster

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE: Cement 0.152 cum per 100 Sqm.

Takingoutoldexistingunservicabledamageddraw/flap gateshutter of distributories/branchcanal/ minorcanal/channelcompletelyafter disengaging fromhoistingsystemcompletelyforinstallationofnew gate shutter. The work includes cutting of gates into suitable pieces by gas cutting, removing the same by mechanical means or suitable crane, stacking all the pieces at the suitable place or departmental godown or as directed by the Engineer in charge. The cost includes cost of manpower employedfordismantlingandcostofconsumables likeoxygen,accetylenegas,hirechargesofmachineries,like chain pulley block, gas set, tools & tackles, scaffolding and safety equipments etcincluding carriage loading & unloading with all lead & lift.

Supplying, fitting and fixing at site Cast Iron flap shutter for hume pipe sluice with Cast Iron collar and other fittings etc. complete (as per drawing & direction of Engineer-in-charge)including castingthe same, necessary drilling etc with carriage to site complete. The Cost includes cost of Materials, Machinaries , Manpower, Cutting, Aligning,drilling,Welding,Finishing,Consumables,Carriagesand all overheads with all leads and lifts complete as per specification (without painting).

Fabrication , Supply, erection and commissioning of new Slide type vertical lift regulator service gates of Canal/River as per IS: 5620 - 2000/Latest Revision consisting of skin plate,verticalandhorizantal grider ,stiffener etc. made of MSmaterialconsistingofangle,channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as pe rapproveddrawinganddirectionincludingcost of Materials, Machinaries , Manpower, Cutting, Aligning, drilling, Welding,Finishing,Consumables,Carriagesandalloverheadswith all leads and lifts complete as per specification (without painting). (i) WidthofGateshuteersizeupto2 metre

Supplying,fifling&fixingofscrewrodhavingsquarethreadof 1.5/2T.P.I,Materialbrightsteel[EN-8/EN9/forgedCl-4(45C8)asper IS:18751992/latest Revision]. dia and threadlengthasrequiredand providing with a drilled hole of required dia on the other end after flattened and supplying with one no. bolt and nut of required size and all other components as requiredasperdirectionofEngineer-In - Charge. The cost includes cost of material, man power employed, consumables like cutting tools, emery paper, cloths, , hire charges of machineries, tools & tackles, grease, mobil etc including carriage loading & unloadingasperdirectionofEngineerincharge. (i) upto length above 3 metre upto 5 metre.

Supplying, fifling & fixing of C.I wheel in the screw hoisting systemforliftingorloweringthedrawshutter.Thewheelconsisting of suitable size hub to accomodate any size of G.M/C.I nut, rim dia 32mm and four nos arm made of minor dia 30mm. & major dia 36mm rod complete or as per approved drawing & direction of the Engineer-in-charge.The cost includes cost of materials, man power employed for dismantling and fitting fixing ,consumableslikecutting tools, welding rod, hire charges of machineries, like lathe machine, grinding machine, tools & tackles etc including carriage loading &unloading. (a)Upto 60cm. dia.CastIron wheel

Cost for supplying and fifling fixing of Flat rubber seal (Make : Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/ SAB Industries/Unique Polymer Works/equivelant approved make conformingtolS:11855-2011/LatestRevision)fordifferenttypesof gate shutter as per direction of E.I.C. The cost includes cost of man power employed for fitting fixing, cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/flat plate, bolts, nuts and washer. a) 65mm x 6 mm.

Supplying at site following materials including carriage over head charges and contractors profit. (i) Long nuts and bolts.

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. I) For structural members of specified sections weighing less than 22.5 Kg./m

Supply,installation,testingandcommisioningoffollowingitemsfor hoisting system and gear box as mentioned below as per direction including cost of Materials, Machinaries , Manpower, Cutting, Machining, Aligning, Anchoring, Welding, Finishing,Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting). (i) Bush(GM)

Supplying,fifling&fixingoftoprunnerbysupplying,fittingand fixingofnewMildSteelChannelconformingtoIS:2062-2011/latest revision with necessary Mild Steel lugs of required length and size by making hole into top of the civil structure and fixingwithnecessry masonery work with maintaining proper line and level as directed by the Engineer- in-charge. The cost includes cost of materials, man poweremployed,costofm.smaterials,costofcivilworksalongwith two coats of epoxy paint over two coats of zinc rich primer.

Fabrication , supply, erection and commissioning of embeded parts consisting of seal beam, Guide channel with all accessories for vertical gate of canal/river made of MS material consisting of angle,channel, beam, plate, flat, etc. conforming to IS : 2062 - 2011/latest revision manufacturedasperapproveddrawinganddirectionincludingcost of Materials, Machinaries ,Manpower,Cutting, Aligning,Anchoring, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting). Remarks:Cost for civil works to be taken from PWD(R) directorate seperatly. (i) Guide channel/Guide path/Top seal path.

Supply of Bearings (a) Bearing No 51211 (SKF) (Thurst Bearing)

Please Enable Macros to View BoQ information