Maintenance and erection of 11KV/3.3KV/440Volt O/H line at different location of Karma Project Under Kuju Area.

Amount

A):- 11KV O/H line

Erection of pole of following length in cement concrete 1.3.6 (1 cement 3 coarse sand 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling ete, as required. Absove 10.00 metre and upto 12.00 metre

Supplying and erection of 11 KV pin insulator complete with largesteel hend G1, pin, nuts, washers etc as required

Supplving and erection of 11 KV disc insulator for 11 KV overhead lines with galvanised insulator fittings, ball and socket typeand complete with galvanised strain elampe, bolts, mas, washers etc as required

Supply of G1 wite 8 SWG (Galvanized Iron Fencing Wire 115.00-17.54-97.46) Less 18% GST) Cading 5 places X 50 Mtr X 6 WIRE X 131 Kg P/Kmtr X 1.05-121.79 Kg

Erection of GI Wire No. 8 SWG including binding eic as required

Erection of ACSR conductor of 7/3 35 mm to 7/4.00 diameter andabove inclusling binding etc as required 0.3 Km X 3 WIREX 394 Kg/TKm X 1.05-372.33 Kg

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg permetre) pole top bracket/cross arn for single 11 KV over head lime conductor complete with 50 min X 6mm flat iron clamp, bolts, nuts nod washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg permetre) cross arın for two 11 KV over head line conductorscomplete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flatiron clamps, bolts and nuts including drilling holes for insulatorpins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required

Supplying and erection of bow stay set complete (galvanised)with 19/20 mm dia X 1.8 metres long stay rod, anchor plate ofsize 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn bucklet 20 mm X 60 cm), 7/4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 13:6 (1 cement 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundationincluding excavation and refilling and also with 0.6 m long braceol size 50 min X 50 mm X 6 mm angle iron with 50 mm dia pulleyfixed at one end of the brace as required

Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm(7.14 kg per metre) double pole cross arm for three wire 11K Vover head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded onone side to the channel iron and with bolts and nuts on the otherside for tying the cross arms together, including drilling holes forinsulator pins/ fittings, bolts, nuts and washers etc (as per drawing)and painting with primer and finish paint as required

Supplying and erection of a set of cross bracing FRLSame workfor 11 KV over head line double pole structure having four membersfabricated out of 50 inm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height complete with 50 mm X 6mm M.S. flat iron clamps, bolts andnuts including drilling holes for insulator pins, bolts and nuts etc(as per drawing) and painting with primer and finish paint as required

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply & Fixing of Aluminium Unarmoured cable single corel 100 voltage grade 35 sq mm

upply & Fixing of Aluminium tub terminal 35 sq imm

Dismantling of over head lines comprising of copper/ aluminiumover head conductor, G.I. wire, cross arms, insulators etc, as required.

Dismantling of pole/ street light standard/ strut embedded incement concrete foundation etc as required

B):-3.3 KV O/H line

Erection of pole of following length in cement concrete 136(1 cement 3 coarse sand 6 graded stone uggregate 40mm nominal size) foundation including excavation and refilling etc as required. Above 10.00 metre and upto 12.00 metre

Supplying and erection of 11 KV pin insulator complete with largesteel head G.I. pin, nuts, washers etc. as required.

Supplying and erection of 11 KV disc insulator for 11 KV overhead lines with galvanised insulator fittings, ball and socket typeand complete with galvanised strain clamps, bolts, nuts, washers etc, as required

Supply of G1 wire & SWG (Galvanized fron Fencing Wire 115.00-17.54-97.46) Less 18% GST) Cradling 3 places X 50 Mir X 6 WIRE X 131 Kg PKmtr X 1.05-123.79 Kg

5. Erection of G 1 Wire No. 8 SWG including binding etc, as required

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter andabove including binding etc. as required. 0.40 Km X 3 WIRE X 394 Kg/PKm X 1.05-496.44 Kg

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg permetre) pole top bracket/crpss arm for single 11 KV over head line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts ete and painting with primer and finish paint as required

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg permetre) cross arm for two 11 KV over head line conductorscomplete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flatiron clamps, bolts and nuts including drilling holes for insulatorpins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.

Supplying and erection of bow stay set complete (galvanised)with 19/20 inm dia X 1.8 metres long stay rod, anchor plate ofsize 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle 20 min X 60 cm), 7/4.00 mm dia G.1 stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand. 6 graded stone aggregnie 40 mm nominal size) foundationincluding excavation and refilling and also with 0.6 m long braceof size 50 mm X 50 mm X 6 mm angle iron with 50 mm dia pulleyfixed at one end of the brace as required.

Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm(7.14 kg per metre) double pole cross arm for three wire 11KVover head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded onone side to the channel iron and with bolts and nuts on the otherside for tying the cross arms together, including drilling holes forinsulator pins/ fittings, bolts, nuts and washers etc (as per drawing)and painting with primer and finish paint as required.

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required: 70 sq. mm

Supplying and erection of a set of cross bracing FRLSame workfor 11 KV over head line double pole structure having four membersfabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height complete with 50 mm X 6mm M.S. flat iron clamps, bolts andnuts including drilling holes for insulator pins, bolts and nuts etc(as per drawing) and painting with primer and finish paint as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply & Fixing of Aluminium Unarmoured cable single corel 100 voltage grade 35 sq mm

Supply & Fixing of Aluminium tub terminal 35 sq mm

Dismantling of over head lines comprising of copper/ aluminiumover head conductor, G.1 wire, cross arms, insulators etc. as required.

Dismantling of pole/ street light standard/strut embedded incement concrete foundatio etc. as required.

C):-220 Volt O/H line

Erection of pole of following length in cement concrete 1.3:6 (1 cement: 3 coarse san 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required Above 10.00 metre and upto 12.00 metre

Supplying and erection of galvanised 'D' iron clamps completewith shackle insulator (100 mm X 110 mm), G.I. bolts, nuts andwashers, coach screws etc. as required.

Supply of G.1 wire 8 SWG (Galvanized Iron Fencing Wire 115.00-17.54-97,46) Less 18% GST) (GI Wire for Earthing900 Mir X 0.148 Kg P Mir X 1.05-139.86 Kg + (For Cradling of Gt Wire 10 places 50 Mir X 5 Wire X 0.148 Kg P Mir X 1.05-38.85 + 1.5 Mir X 10 places X 0.148 Kg P Mir X 10 places 22.20 Kg

Erection of G.I. Wire No. 8 SWG including binding etc. as required

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter andabove including binding etc. as required (Conductor 0.30 Km X 4 Wire X 214 Kg P/Km X 1.05-359.52Kg)

Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm(7.14 kg per metre) double pole cross arm for three wire 11KVover head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded onone side to the channel iron and with bolts and nuts on the otherside for tying the cross arms together, including drilling holes forinsulator pins/ fittings, bolts, nuts and washers etc (as per drawing)and painting with primer and finish paint as required

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg permetre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulatorpins etc (as per drawing) and painting with primer and finishedpaint as required

Supplying and erection of 100 mm X 80 mm pin insulator completewith G. 1. Spindle and nuts etc. as required.

Supplying and erection of bow stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate ofsize 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle(20 mm X 60 cm ), 7/4.00 mm dia G.1. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundationincluding excavation and refilling and also with 0.6 in long braceof size 50 mm X 50 mm X 6 mm angle iron with 50 mm dia pulleyfixed at one end of the brace as required.

Supply & Fixing of LT PVC Spacers

Dismantling of over head lines comprising of copper/aluminiumover head conductor, G.1. wire, cross arms, insulators etc. as required.

Dismantling of pole/ street light standard/strut embedded incement concrete foundation etc. as required.

Total impact of GST for the purpose of CTC

M/S. PAWAN KUMAR (BID ID -1149689)

Nehru Electricals (BID ID -1149635)