LOT15 VIKAS KHAND GARWAR KE GRAM PANCHAYAT BALEJI ME ASTHAPIT AMBEDKAR JI KI MURTI KA JIRNODDHAR AUR SUNDARI KARAN KARYA

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR 13.4.1 (2023)

Removing dry or oil bound distemper ,water proofing cement paint and the like by scraping ,sand papering and preparing the surface smooth including necessary repairs to scratches etc complete DSR 13.91(20023)

Providing and Applying plaster of paris putty of 2 mm thickness over plaster surface to prepare the surface even and smooth complete DSR 13.26

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) DSR 13.47.1 (2023)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR 13.62.1 (2023)

Construction of granular sub-base by providing well graded ,spreading in uniform layers with motor grader on preapared surface, mixing by mix in place method with rotavater at OMC ,and compacting with smooth wheel roller to achieve the desired dencity, complete as per technical specification clause 401. of MORD data book

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over aprepared sub base, with 43grade cement or any of ther type as per clause 1501.2.2 M30 (Grade), coarse and fine agregates conforming to IS:383, maximum sixe of coarse aggregates not exceeding 25mm, mixed in a concrete mixer of not less than 0.2cum capicity and appropriate weigh batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythin firm wedges, steel plates including leveling the form work as per drawing) spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrator sand finshed in continuos operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/ culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days. Curing compound (where specified) and water finishing to line sand grade as per drawing and Technical Specification Clause 1501

Supply of Steel Bench including supply of all materials labours T&P etc required for proper completion of the work

S/O Hand rail and balustrade modular system passiess 204 grades decorative railing system comprising of hand rail 50 mm and 1.5 mm thick of equal spacing with balustrade of SS Pipe of 38 mm and 1.5 mm thick @1200mm C/C of passivatedSS 304 Grade and fix duly on the floor with specialy dresing rivet expamsion bolt and finish the surface food and covering with steel shoe with all visible stainless steel metal of 204 grade in satin finish height of railing is 900 mm as per detailed specification,item No 20 of material.

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement oncrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). DSR 10.13.1 (2023)