4.Maintenance and repair of gardens under Ichalkaranji Municipal Corporation.Rate Contract (RC) for the Financial year

Amount

Supplying and erecting G.I. pipe pole ‘B’ class 80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification no. OH-PL/GIP

Supplying and erecting M.S. pipe pole ‘B’ class 80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification no. OH-PL/GIP

Supplying and erecting G.I. pipe ‘C’ class ERW 20 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Supplying and erecting Gate / garden light fitting with 200mm dia. Glass bowl suitable for upto 12W LED Lamp on provided pipe as per specification No. FG-ODF/GLT.

Supplying and erecting Gate / garden light fitting with 300mm dia. Glass bowl suitable for upto 12W LED Lamp on provided pipe as per specification No. FG-ODF/GLT.

Supplying & erecting integral post top lantern fixtures (mushroom type) suitable for LED lamp upto 12 W consisting of clear acrylic top cover, cast aluminium pole cap complete with accessories on provided pole /bracket as per cification no. FG-ODF/PTL.

Supplying & erecting integral post top lantern fixtures (globe type) suitable or LED lamp upto 12 W consisting of aesthetic round clear acrylic top cover, cast aluminium pole cap on provided pole /bracket as per specification no. FG ODF/PTL.

Supplying & erecting integral post top lantern fixtures (light house type) suitable upto LED 18 W Lamp consisting of combination of spun aluminium canopy & clear acrylic top cover, cast aluminium pole cap on provided pole/ bracket as per specification no. FG-ODF/PTL.

Supplying and erecting integrated LED Highbay Fitting 70W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics, having system lumens output of Min. 10000 Lumens, min. efficacy of 145 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, 13 operating range of 140-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50, including driver complete with 3 Year warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED Highbay Fitting 100W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics, having system lumens output of Min. 15000 Lumens, min. efficacy of 145 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50, including driver complete with 3 Year warranty as per specification No FG-ODF/FLS2

Supplying and erecting integrated LED Highbay Fitting 135W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics, having system lumens output of Min. 20000 Lumens, min. efficacy of 145 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 4kV, Life class of 50,000 Hrs. at L50B50, including driver complete with 3 Year warranty as per specification No FG-ODF/FLS2

Supplying and erecting Street light bracket for erection of Single fitting made from 40 mm. dia 'B' 16 class G.I. pipe 1.0 m. in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no. FG-BKT/BPC

Supplying and erecting Street light bracket for erection of Double fitting made from 40 mm. dia 'B' 17 class G.I. pipe 1.0 m. in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no. FG BKT/BPC

Supplying and erecting Street light bracket for erection of Single fitting on tubular welded pole with 40 mm. dia 1.0 m. length "B" class G.I.pipe along with pole cap of 125mm dia 600 mm long duly welded as per specification no.FG-BKT/BPC

Supplying and erecting Street light bracket for erection of Double fitting on tubular welded pole with 40 mm. dia 1.0 m long “B” grade G.I. pipe along with pole cap of 125mm dia 600 mm long duly welded as per specification no.FG-BKT/SLB

Supplying and erecting electronic type Driver for Outdoor LED fittings upto 25W suitable to operate on 230V A.C. 50 Hz. Having p.f>0.95 and THD<10% as per specification no. FG-ODF/AS.

Supplying and erecting electronic type Driver for Outdoor LED fittings upto 26W-45W suitable to operate on 230V A.C. 50 Hz. having p.f>0.95 and THD<10% as per specification no. FG-ODF/AS.

Supplying and erecting electronic type Driver for Outdoor LED fittings upto 46W-75W suitable to operate on 230V A.C. 50 Hz. having p.f>0.95 and THD<10% as per specification no. FG-ODF/AS.

Supplying and erecting electronic type Driver for Outdoor LED fittings upto 76W-100W suitable to operate on 230V A.C. 50 Hz. having p.f>0.95 and THD<10% as per specification no. FG-ODF/AS.

Supplying and laying(includingexcavationof suitablewidth&depthupto90 cm)50mmoutside dia.double wallcorrugated pipes (DWC)ofHDPE for enclosing cable below ground/road surface, complete.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable, 1100 V 2 core 4 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Re-erecting PVC / XLPE armoured cable 2 to 4 Core up to 50 sq. mm. on wall with necessary material & G.I. earth wire.

Supplying and erecting mains with WP 2 x 2.5 sq. mm. 1.1kV grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire no. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire.

Supplying and erecting mains with WP 2 x 4 sq. mm. 1.1 kV grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire no. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire.

Supplying and erecting mains with WP 4 x 4 sq. mm. 1.1kV. grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire no. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire.

Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW

Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no. WG-MA/BW

Supplying and erecting PVC insulated PVC round sheathed FR 1 sq.mm (32 no. x 0.20mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kV

Supplying and erecting PVC insulated PVC round sheathed FR 1.5 sq.mm (30 no. x 0.25mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kV

Supplying and erecting PVC insulated PVC round sheathed FR 2.5 sq.mm (50 no. x 0.25mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kV

Supplying,erecting&markingSPMCB6Ato32A,C-serieswithratedshort-circuit breakingcapacity(Icn) 10kA inprovided distributionboardasper specificationno. SW-MCB

Supplying,erecting&markingSPMCB6Ato32A,B-serieswithratedshort-circuit breakingcapacity(Icn) 10kA inprovided distributionboardasper specificationno. SW-MCB

Supplying, erecting&markingSPMCB40Ato63A,C-serieswith ratedshort circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB

Supplying, erecting&markingSPMCB40Ato63A,B-serieswith ratedshort circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB

Supplying,erecting&markingDPMCB6Ato32A,C-serieswithratedshort-circuit breakingcapacity(Icn) 10kAinprovideddistributionboardasper specificationno. SW-MCB

Supplying, erecting & marking DPMCB 6A to 32A, B-serieswithratedshort circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB

Supplying, erecting&markingDPMCB40Ato63A,C-serieswith ratedshort circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB

Supplying, erecting&markingDPMCB40Ato63A,B-serieswith ratedshort circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB

Supplying, erecting&markingTPMCB6A to 32A, with rated short- circuit breakingcapacity (Icn) kAinprovideddistributionboardasper specificationno. SW-MCB

Supplying, erecting&markingTPMCB40A to 63A, with rated short- circuit breakingcapacity(Icn) 0kAinprovideddistributionboardasper specificationno. SW-MCB

Supplying, erecting&marking FPMCB6A to 32A, with rated short- circuit breakingcapacity(Icn) 0kAinprovideddistributionboardasper specificationno. SW-MCB

Supplying, erecting&markingFPMCB40A to 63A, with rated short- circuit breakingcapacity(Icn)10kA inprovideddistributionboardasperspecificationno. SW-MCB

Supplying&erectingFRPboxof size150mmx125mmx100mm, 2.7mm thick complete on pole/wall as per specification No. CB-SB

Supplying&erectingFRPboxof size250mmx200mmx100mm, 2.7mm thick complete on pole/wall as per specification No. CB-SB

Supplying & erecting watertight terminal box of cast iron of size 300 x 200 x 150 mm complete on pole as per specification No. CB-SB

Supplying & erecting MS pole bracket for guarding/LT OH line, fabricated from angle iron 50x50x6mm and 550mm long for necessary nos. of provided insulators, and erecting on pole with 50x6mm clamp complete as per specification no. OH-PL/BKT

Supplying & erecting MS pole bracket for guarding/LT OH line, fabricated from angle iron 50x50x6mm and 1100mm long for necessary nos. of provided insulators, and erecting on pole with 50x6mm clamp complete as per specification no. OH-PL/BKT

Supplying & erecting MS pole bracket for guarding/LT OH line, fabricated from ISM channel 75x40x6mm and 550mm long for necessary nos. of provided insulators and erecting on pole with 50x6mm clamp complete as per specification no. OH-PL/BKT

Supplying & erecting MS pole bracket for guarding/LT OH line, fabricated from ISM channel 75x40x6mm and 1100mm long for necessary nos. of provided insulators and erecting on pole with 50x6mm clamp complete as per specification no. OH-PL/BKT

Supplying & erecting MS pole bracket for LT OH conductor fabricated from 65x65x6 mm section, 550mm long for necessary nos. of provided insulators and erecting on pole with 50x6mm clamp complete as per specification no. OH PL/BKT

Supplying & erecting MS pole bracket for LT OH conductor fabricated from 65x65x6 mm section, 1100mm long for necessary nos. of provided insulators and erecting on pole with 50x6mm clamp complete as per specification no. OH PL/BKT

SupplyinganderectingG.I.wallhook,10to15mmdiaandoverall length250mm including grouting, cement plastering etc. complete.

SupplyinganderectingguardingloopusingG.l.wireno.8SWGforLTOHline ofhorizontal formationerectedwith20SWGG.l.wireas bindingwireand50mm section on each side complete.

Supplyinganderectingpoleclampmade from50x10mmMS flat forpoleor pipe,posterected with 15mm boltsandnutsdulypaintedwithonecoatof red oxide and two coats of aluminium paint.

Supplying and fixing MS base plate 30x30x0.6cm size fixed to the pole base either by welding 12mm dia fixed at position.

Dismantling the existing pole up to 6 m height with brackets, clamps, insulators, stay from the c.c. foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level.

Dismantling the existing pole above 6 m height with brackets, clamps, insulators, stay from the c.c. foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level

Dismantling the existing overhead line including G.I. wires of all sizes without damaging & making the coils in suitable sizes.

Dismantling the existing lightening arrestor set, insulator from DP structure complete.

Making Cement concrete foundation including excavation (45 x 45 x 120)cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal, (45 x 45 x 45)cm/ 45cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete. (for 6m pole)

Making Cement concrete foundation including excavation (60 x 60 x 150)cm deep in 1:3:6 cement concrete 20 x 25 mm stone metal, (45 x 45 x 45)cm /45cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete. (above 6m to 9m poles)

Supplying, erecting, testing & commisioning marine (Waterproof) plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete with compliance to IS 720:2010 as per specification no. CP/SH/CR

Supplying and erecting iron work, sheet metal work consisting of MS sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the site engineer.

Supplying and erecting slotted angles, frames etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the site engineer.

Supplying, erecting, testing & commisioning static energy meter with 240V 50 Hz. AC supply 5 to 30 A, accuracy class 1.0 with backlit LCD display, (measuring and display kWh, kVAh,V, I, PF, frequency, kW, kVA, six months history of energy & MD in kW & kVA) with transparent hinge type box complete erected on polished teak wood board duly wired with required size of weatherproof PVC wires duly tested by electric supply company.

Supplying and erecting static energy meter with 240V 50 Hz. AC supply 10 to 60 A, accuracy class 1.0 with backlit LCD display, (measuring and display kWh, kVAh, V,I,PF, frequency, kW, kVA, six months history of energy & MD in kW & kVA) with transparent hinge type box complete erected on polished teak wood board duly wired with required size of weatherproof PVC wires duly tested by electric supply company.

Supplying and erecting static energy meter with 3x240V 50 Hz. AC supply 10 to 60 A, accuracy class 1.0 with backlit LCD display, (Measures & displays Trivector, V, I, kW, PF, Hz, last month history of kWh & MD in kW) with special features like TOD, Tamper logging, Optical Communication Port & Display in absence of Power & with transparent hinge type box complete erected on polished teak wood board duly wired with required size of weatherproof PVC wires duly tested by electric supply company.

Supplying and erecting static energy Trivector meter 3x240V 50 Hz. 20- 100A meter AC 3 phase 4 wires LCD/LED display (Measures & displays Trivector, V, I, kW, PF, Hz, last month history of kWh & MD in kW) with special features like TOD, Tamper logging, Optical Communication Port & Display in absence of Power complete erected on polished teak wood board duly wired with required size of weatherproof PVC wires duly tested for class 1.0 accuracy by electric supply company

Supplying and erecting circular flexible/rigid PVC pipe duct of size 40mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves/dampers, filters at position complete.

Supplying and erecting circular flexible/rigid PVC pipe duct of size 50mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves/dampers, filters at position complete

Supplying and erecting circular flexible/rigid PVC pipe duct of size 80mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves/dampers, filters at position complete .

Supplying and erecting circular flexible/rigid PVC pipe duct of size 100mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves / dampers, filters at position complete.

Supplying and erecting programmable digital almanac timer microcontroller based with real time clock to operate on derived switching “ON” and switching “OFF” street light as per daily sunset and sunrise respectively automatically having 4 digit LED continuous time display, relay output 230V / 10A with 10 hrs. battery backup and manual over drive facility capable to drive different capacity contactors timer erected in provided M.S. box.

Supplying and erecting four pole power contactor 430V, 16A for time switch complete erected on provided wooden block/ box, with necessary materials.

Supplying and erecting two pole power contactor 230V, 32A for time switch complete erected on provided wooden block/ box, with necessary materials

Supplying and erecting four pole power contactor 430V, 40A for time switch complete erected on provided wooden block/ box, with necessary materials.

Painting of pipe pole up to 6 m length along with street light/pole brackets/clamps etc by scrapping the existing paint complete as per specification no CW-PTG/PTP.

Painting of steel tubular/rail/ RSJ pole above 6.0 m length along with street light pole brackets, clamps etc by scrapping the existing paint complete as per specification no CWPTG/PTP

Powder coating of approved colour shade on both sides of provided iron work/MS/CRCA sheet steel work complete including anti-rust treatment complete.

Epoxy painting on both side of approved colour shade of provided iron work /MS/CRCA sheet steel work complete along with anti-rust treatment complete.

Painting of pipe pole up to 6m length alongwith street light/ pole brackets/ clamps etc by scrapping the existing paint complete as per specification no CW -PTG/PTP.

Supplying & erecting G.I. pipe ‘A’ class 50 mm dia. for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE

Supplying&erectingG.I. pipe ‘A’ class 40mm dia. for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE

Supplying&erecting G.I. pipe ‘A’ class 25mm dia. for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE

Supplying, installing and testing earthing with galvanised iron earth plate size 60 x 60 x 0.6 cm complete with all accessories of GI materials & recording the results as per specification No. EA-EP

Supplying, installing and testing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.I. Rod complete with all accessories of GI materials & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required as per specification no EA-EP.

Supplying and erecting GI earth conductor of required sizes used for earthing or any other purposes on wall with necessary GI clamps fixed on wall/cable/ conduit with screws complete.

Supplying, erecting, testing & commisioning GI sheet 1.25 mm (18 SWG) having zinc coating of 350 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint as per specification no.CP/SH/CR

Supplying & erecting fuse bridges with base HC type fuse links 240V, 63A erected on polished wooden block.

Supplying & erecting fuse bridge with base 16A erected on provided switch board complete

Supplying and erecting HC pattern porcelain fuse bridges with base & HC type fuse links 240V, 32A erected on polished wooden block.

Supplying and erecting bakelite fuse fitting suitable for HRC bolted type fuse up to 63A without fuse.

Supplying and erecting metal clad changeover switch 2 pole, 240 V, 32A erected on provided angle iron/GI frame and duly connected with suitable wire leads complete as per specification no. SW-SWR/COS.

Supplying and erecting switch disconnector fuse (SDF) switch triple pole and neutral link, 415V, 25/32A, open execution, AC23 A rated with terminal shrouds on both sides and phase barriers along with telescopic shaft for depth adjustments and door interlock and padlock complying to IS/IEC 60947-3 Part-1/3 HRC-DIN type fuse, insulation voltage 1000V for enclosing in panel with rotary handle for ON / OFF operation (without HRC fuse) as per specification no. SW-SWR/SDF.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable, 1100 V 4 core 6 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and erecting integrated LED Bollard Cylindrical / Cubical shaped 500mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD <10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with minimum 2 Year warranty as per specification No FG-ODF/BL.

Supplying and erecting LED Strip light Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs at L70B50 including driver with minimum 1 year warranty as per specification No. FG-IDF/LED.

Supplying and erecting LED Strip light Max. 95 W IP20 class having minimum lumens output of 1600 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs at L70B50 including driver with minimum 1 year warranty as per specification No. FG-IDF/LED.

Supplying & erecting integral post top lantern fixtures (mushroom type) suitable for LED lamp upto 12 W consisting of clear acrylic top cover, cast aluminium pole cap complete with accessories on provided pole /bracket as per specification no. FG-ODF/PTL.

Supplying and erecting integrated LED flood light fitting Max. 30W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 3000 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracket with minimum 2 Years warranty as per specification No. FGODF/FL.

Supplying and erecting integrated LED Post Top 45W IP65 & IK10 class having die cast aluminium housing with UV protected polycarbonate diffuser, having system lumens output of Min.4500 Lumens, min. efficacy of 105 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 30,000 Hrs at L50B50 , including driver complete with minimum 2 Year warranty as per specification No FG-ODF/PT.

Supplying and erecting integrated LED round burial light 6W IP65 & IK10 class having pressure die-cast housing, having system lumens output of Min. 500 Lumens, min. efficacy of 85 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 100-240V, inbuilt surge protection of 2 kV, Life class of 50,000 Hrs at L50B50 , slat spray tested for 500 Hrs. including making of recess of appropriate size for flushing into surface with minimum 2 Year warranty as per specification No FG-ODF/PT.

Supplying and erecting Concealed type foot/step light Max. 5W having IP67, IK10 rated Pressure die cast housing having system lumens output of Min. 500 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, SDCM<5, p.f. >0.95, operating range of 230-270V, surge protection of 2.5 kV, Life class of 25,000 Hrs at L70B50, including driver by making necessary arrangement /recess in wall to make it flush with surface with minimum 2 Year warranty.

Supplying and erecting integrated LED flood light fitting Max. 30W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 3000 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracket with minimum 2 Years warranty as per specification No. FGODF/FL.

Erection of departmentally supplied exhaust fan with necessary materials complete

Supply and Erection of New Pole Erection/Shifting Pole or Overhead/Underground Cables MSEDCL Quotation under 1.3% DDF scheme (Incl Tech. Sanction+supervision charges)

TUSHAR ELECTRICALS (BID ID -6806302)

Veera Electricals (BID ID -6804191)