PROVIDING AB SWITCHES AT VARIOUS LOCATIONS UNDER ES CHERPULASSERY

Fitting one set AB switch and giving connection

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Drilling hole of various sizes on existing Channel/Cross Arm.

Additional rate for providing one disc set on any type of HT pole for making cut point.

Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.

Additional rate for excavation of Pit for A type pole in Hard Laterite.

Stringing of one km 11kV line with ACSR Raccoon (3 conductors) incl. cutting and removing tree branches wherever necessary.

Fitting one Additional V cross arm in existing single pole incl. conveyance of materials.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Fitting one LT 4 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Fitting one additional HT pin with insulator

Renewal of existing damaged/broken old 11kV Stay to the existing stay rod.

Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.

Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) one km 11kV line (3 conductors), cross arm, insulators, disc, rolling the conductor and stacking.

Dismantling (without damage) one AB switch from existing structure and bringing back to section store.

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling.

Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite.

Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite.

Please Enable Macros to View BoQ information